Download or read book Control of a Wind Driven Doubly Fed Induction Generator During Grid Faults written by Mahmoud Mossa and published by GRIN Verlag. This book was released on 2013-02-06 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master's Thesis from the year 2013 in the subject Engineering - Power Engineering, grade: none, , course: Electrical engineering (Renewable energy), language: English, abstract: Wind electrical power systems are recently getting lot of attention, because they are cost competitive, environmental clean and safe renewable power source, as compared with fossil fuel and nuclear power generation. A special type of induction generator, called a doubly fed induction generator (DFIG), is used extensively for high-power wind applications. They are used more and more in wind turbine applications due to ease controllability, high energy efficiency and improved power quality. This thesis aims to develop a method of a field orientation scheme for control both the active and reactive powers of a DFIG driven by a wind turbine.The proposed control system consists of a wind turbine that drives a DFIG connected to the utility grid through AC-DC-AC link. The main control objective is to regulate the dc link voltage for operation at maximum available wind power.This is achieved by controlling the and axes components of voltages and currents for both rotor side and line side converters using PI controllers. The complete dynamic model of the proposed system is described in detail. Computer simulations have been carried out in order to validate the effectiveness of the proposed system during the variation of wind speed. The results prove that , better overall performances are achieved, quick recover from wind speed disturbances in addition to good tracking ability. Generally, any abnormalities associated with grid asymmetrical faults are going to affect the system performance considerably. During grid faults, unbalanced currents cause negative effects like overheating problems and mechanical stress due to high torque pulsations that can damage the rotor shaft, gearbox or blade assembly. Therefore, the dynamic model of the DFIG, driven by a wind turbine during grid faults has been analyzed and developed using the method of symmetrical components. The dynamic performance of the DFIG during unbalanced grid conditions is analyzed and described in detail using digital simulations. A novel fault ride-through (FRT) capability is proposed (i.e. the ability of the power system to remain connected to the grid during faults) with suitable control strategy in this thesis. In this scheme, the input mechanical energy of the wind turbine during grid faults is stored and utilized at the moment of fault clearance, instead of being dissipated in the resistors of the crowbar circuit as in the existing FRT schemes. [...]
Download or read book Modeling Analysis and Enhancement of the performance of a Wind Driven DFIG During steady state and transient conditions written by Mohmoud Mossa and published by Anchor Academic Publishing (aap_verlag). This book was released on 2014-02-01 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recently, wind electrical power systems are getting a lot of attention since they are cost competitive, environmentally clean, and safe renewable power source as compared with the fossil fuel and nuclear power generation. A special type of induction generator, called a doubly fed induction generator (DFIG), is used extensively for high-power wind applications. They are used more and more in wind turbine applications due to the ease of controllability, the high energy efficiency, and the improved power quality.This research aims to develop a method of a field orientation scheme for control both, the active and the reactive powers of a DFIG that are driven by a wind turbine. Also, the dynamic model of the DFIG, driven by a wind turbine during grid faults, is analyzed and developed, using the method of symmetrical components. Finally, this study proposes a novel fault ride-through (FRT) capability with a suitable control strategy (i.e. the ability of the power system to remain connected to the grid during faults).
Download or read book Advanced Control of Doubly Fed Induction Generator for Wind Power Systems written by Dehong Xu and published by John Wiley & Sons. This book was released on 2018-08-14 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the fundamental concepts and advanced modelling techniques of Doubly Fed Induction Generators accompanied by analyses and simulation results Filled with illustrations, problems, models, analyses, case studies, selected simulation and experimental results, Advanced Control of Doubly Fed Induction Generator for Wind Power Systems provides the basic concepts for modelling and controlling of Doubly Fed Induction Generator (DFIG) wind power systems and their power converters. It explores both the challenges and concerns of DFIG under a non-ideal grid and introduces the control strategies and effective operations performance options of DFIG under a non-ideal grid. Other topics of this book include thermal analysis of DFIG wind power converters under grid faults; implications of the DFIG test bench; advanced control of DFIG under harmonic distorted grid voltage, including multiple-loop and resonant control; modeling of DFIG and GSC under unbalanced grid voltage; the LFRT of DFIG, including the recurring faults ride through of DFIG; and more. In addition, this resource: Explores the challenges and concerns of Doubly Fed Induction Generators (DFIG) under non-ideal grid Discusses basic concepts of DFIG wind power system and vector control schemes of DFIG Introduces control strategies under a non-ideal grid Includes case studies and simulation and experimental results Advanced Control of Doubly Fed Induction Generator for Wind Power Systems is an ideal book for graduate students studying renewable energy and power electronics as well as for research and development engineers working with wind power converters.
Download or read book Advanced Controls for Wind Driven Doubly Fed Induction Generators written by Mahmoud K. Abdelhamid and published by CRC Press. This book was released on 2023-12-22 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Controls for Wind Driven Doubly Fed Induction Generators discusses the most advanced control algorithms used for enhancing the dynamics of a doubly fed induction generator (DFIG) operating at fixed and variable speeds, and which are used for different utilization purposes (standalone and grid connection). Extensive generator performance analysis has been introduced using various control topologies. Features: Presents modeling of wind energy conversion systems (WECS), including a wind turbine as a prime mover, a DFIG as a generation unit for electrical energy, and a three-phase induction motor as an isolated load Explores a detailed description for the presented control algorithms in order to visualize the base principle of each method Introduces a comprehensive performance analysis for the DFIG using the formulated predictive voltage control scheme and other control techniques under different operating conditions Examines the formulation of new control approaches which overcome the shortages present in previous DFIG control schemes Presents a detailed comparison between different control topologies for the DFIG to outline the most effective procedure in terms of dynamic response, structure simplicity, ripples, total harmonic distortion, and computational burdens The book is written for researchers and academics working on advanced control systems and those interested in areas such as machine drives, renewable energy systems, 'adaptive control', modeling of WECS, and optimization theory.
Download or read book Wind Driven Doubly Fed Induction Generator written by Adel Abdelbaset and published by Springer. This book was released on 2017-10-30 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a modified model reference adaptive system (MRAS) observer for sensorless vector control of a wind driven doubly fed induction generator (DFIG). A mathematical model of the DFIG as influenced by core loss and main flux saturation is developed. The authors describe and evaluate grid synchronization enhancement of a wind driven DFIG using adaptive sliding mode control (SMC). Besides, grid synchronization of a wind driven DFIG under unbalanced grid voltage is also fully covered in this book.
Download or read book Advanced Controls for Wind Driven Doubly Fed Induction Generators written by Mahmoud K. Abdelhamid and published by CRC Press. This book was released on 2023-12-22 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Controls for Wind Driven Doubly Fed Induction Generators discusses the most advanced control algorithms used for enhancing the dynamics of a doubly fed induction generator (DFIG) operating at fixed and variable speeds, and which are used for different utilization purposes (standalone and grid connection). Extensive generator performance analysis has been introduced using various control topologies. Features: Presents modeling of wind energy conversion systems (WECS), including a wind turbine as a prime mover, a DFIG as a generation unit for electrical energy, and a three-phase induction motor as an isolated load Explores a detailed description for the presented control algorithms in order to visualize the base principle of each method Introduces a comprehensive performance analysis for the DFIG using the formulated predictive voltage control scheme and other control techniques under different operating conditions Examines the formulation of new control approaches which overcome the shortages present in previous DFIG control schemes Presents a detailed comparison between different control topologies for the DFIG to outline the most effective procedure in terms of dynamic response, structure simplicity, ripples, total harmonic distortion, and computational burdens The book is written for researchers and academics working on advanced control systems and those interested in areas such as machine drives, renewable energy systems, 'adaptive control', modeling of WECS, and optimization theory.
Download or read book Stability Control and Reliable Performance of Wind Turbines written by Kenneth Eloghene Okedu and published by BoD – Books on Demand. This book was released on 2018-10-10 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended for academics and engineers working in universities, research institutes, and industry sectors wishing to acquire new information and enhance their knowledge of the current trends in wind turbine technology. Readers will gain new ideas and special experience with in-depth information about modeling, stability control, assessment, reliability, and future prospects of wind turbines. This book contains a number of problems and solutions that can be integrated into larger research findings and projects. The book enhances studies concerning the state of the art of wind turbines, modeling and intelligent control of wind turbines, power quality of wind turbines, robust controllers for wind turbines in cold weather, etc. The book also looks at recent developments in wind turbine supporting structures, noise reduction estimation methods, reliability and prospects of wind turbines, etc. As I enjoyed preparing this book, I am sure that it will be valuable for a large sector of readers.
Download or read book Smart Grid Systems written by N. Ramesh Babu and published by CRC Press. This book was released on 2018-07-04 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electric power systems are being transformed from older grid systems to smart grids across the globe. The goals of this transition are to address today’s electric power issues, which include reducing carbon footprints, finding alternate sources of decaying fossil fuels, eradicating losses that occur in the current available systems, and introducing the latest information and communication technologies (ICT) for electric grids. The development of smart grid technology is advancing dramatically along with and in reaction to the continued growth of renewable energy technologies (especially wind and solar power), the growing popularity of electric vehicles, and the continuing huge demand for electricity. Smart Grid Systems: Modeling and Control advances the basic understanding of smart grids and focuses on recent technological advancements in the field. This book provides a comprehensive discussion from a number of experts and practitioners and describes the challenges and the future scope of the technologies related to smart grid. Key features: provides an overview of the smart grid, with its needs, benefits, challenges, existing structure, and possible future technologies discusses solar photovoltaic (PV) system modeling and control along with battery storage, an integral part of smart grids discusses control strategies for renewable energy systems, including solar PV, wind, and hybrid systems describes the inverter topologies adopted for integrating renewable power covers the basics of the energy storage system and the need for micro grids describes forecast techniques for renewable energy systems presents the basics and structure of the energy management system in smart grids, including advanced metering, various communication protocols, and the cyber security challenges explores electric vehicle technology and its interaction with smart grids
Download or read book Source Grid Interaction of Wind Power Integration Systems written by Da Xie and published by Elsevier. This book was released on 2023-04-29 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: Source-Grid Interaction of Wind Power Integration Systems systematically describes the problems of source-grid interactions of wind power grid-connected system, introducing related research methods and proposing a series of novel control methods for damping oscillations. The book presents problems to be solved, thus enabling easy understanding and perception, from detailed analysis of the problems, to mathematical derivations and simulation verification. Includes principles that can be used to analyze the operation and control of wind farms Presents models developed from basic to complex aspects that affect modeling accuracy Provides control methods and effectiveness verification based on rigorous theory and actual operational data
Download or read book Modeling Identification and Control Methods in Renewable Energy Systems written by Nabil Derbel and published by Springer. This book was released on 2018-12-24 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most of the research and experiments in the fields of modeling and control systems have spent significant efforts to find rules from various complicated phenomena by principles, observations, measured data, logic derivations. The rules are normally summarized as concise and quantitative expressions or “models”. “Identification” provides mechanisms to establish the models and “control” provides mechanisms to improve system performances. This book reflects the relevant studies and applications in the area of renewable energies, with the latest research from interdisciplinary theoretical studies, computational algorithm development to exemplary applications. It discusses how modeling and control methods such as recurrent neural network, Pitch Angle Control, Fuzzy control, Sliding Mode Control and others are used in renewable systems. It covers topics as photovoltaic systems, wind turbines, maximum power point tracking, batteries for renewable energies, solar energy, thermal energy and so on. This book is edited and written by leading experts in the field and offers an ideal reference guide for researchers and engineers in the fields of electrical/electronic engineering, control system and energy.
Download or read book Doubly Fed Induction Generators written by Edgar N. Sanchez and published by CRC Press. This book was released on 2016-08-05 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: Doubly Fed Induction Generators: Control for Wind Energy provides a detailed source of information on the modeling and design of controllers for the doubly fed induction generator (DFIG) used in wind energy applications. Focusing on the use of nonlinear control techniques, this book: Discusses the main features and advantages of the DFIG Describes key theoretical fundamentals and the DFIG mathematical model Develops controllers using inverse optimal control, sliding modes, and neural networks Devises an improvement to add robustness in the presence of parametric variations Details the results of real-time implementations All controllers presented in the book are tested in a laboratory prototype. Comparisons between the controllers are made by analyzing statistical measures applied to the control objectives.
Download or read book Neural Control of Renewable Electrical Power Systems written by Edgar N. Sánchez and published by Springer Nature. This book was released on 2020-05-09 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents advanced control techniques that use neural networks to deal with grid disturbances in the context renewable energy sources, and to enhance low-voltage ride-through capacity, which is a vital in terms of ensuring that the integration of distributed energy resources into the electrical power network. It presents modern control algorithms based on neural identification for different renewable energy sources, such as wind power, which uses doubly-fed induction generators, solar power, and battery banks for storage. It then discusses the use of the proposed controllers to track doubly-fed induction generator dynamics references: DC voltage, grid power factor, and stator active and reactive power, and the use of simulations to validate their performance. Further, it addresses methods of testing low-voltage ride-through capacity enhancement in the presence of grid disturbances, as well as the experimental validation of the controllers under both normal and abnormal grid conditions. The book then describes how the proposed control schemes are extended to control a grid-connected microgrid, and the use of an IEEE 9-bus system to evaluate their performance and response in the presence of grid disturbances. Lastly, it examines the real-time simulation of the entire system under normal and abnormal conditions using an Opal-RT simulator.
Download or read book Doubly Fed Induction Machine written by Gonzalo Abad and published by John Wiley & Sons. This book was released on 2011-09-28 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will be focused on the modeling and control of the DFIM based wind turbines. In the first part of the book, the mathematical description of different basic dynamic models of the DFIM will be carried out. It will be accompanied by a detailed steady-state analysis of the machine. After that, a more sophisticated model of the machine that considers grid disturbances, such as voltage dips and unbalances will be also studied. The second part of the book surveys the most relevant control strategies used for the DFIM when it operates at the wind energy generation application. The control techniques studied, range from standard solutions used by wind turbine manufacturers, to the last developments oriented to improve the behavior of high power wind turbines, as well as control and hardware based solutions to address different faulty scenarios of the grid. In addition, the standalone DFIM generation system will be also analyzed.
Download or read book Recent Advances in Electrical and Information Technologies for Sustainable Development written by Soumia El Hani and published by Springer. This book was released on 2019-02-08 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book includes the best extended papers which were selected from the 3rd International Conference of Electrical and Information Technologies (ICEIT 2017, Morocco). The book spans two inter-related research domains which shaped modern societies, solved many of their development problems, and contributed to their unprecedented economic growth and social welfare. Selected papers are based on original and high quality research. They were peer reviewed by experts in the field. They are grouped into five parts. Part I deals with Power System and Electronics topics that include Power Electronics & Energy Conversion, Actuators & Micro/Nanotechnology, etc. Part II relates to Control Systems and their applications. Part III concerns the topic of Information Technology that basically includes Smart Grid, Information Security, Cloud Computing Distributed, Big Data, etc. Part IV discusses Telecommunications and Vehicular Technologies topics that include, Green Networking and Communications, Wireless Ad-hoc and Sensor Networks, etc. Part V covers Green Applications and Interdisciplinary topics, that include intelligent and Green Technologies for Transportation Systems, Smart Cities, etc. This book offers a good opportunity for young researchers, novice scholars and whole academic sphere to explore new trends in Electrical and information Technologies.
Download or read book Large Grid Connected Wind Turbines written by Frede Blaabjerg and published by MDPI. This book was released on 2019-04-02 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the technological progress and developments of a large-scale wind energy conversion system along with its future trends, with each chapter constituting a contribution by a different leader in the wind energy arena. Recent developments in wind energy conversion systems, system optimization, stability augmentation, power smoothing, and many other fascinating topics are included in this book. Chapters are supported through modeling, control, and simulation analysis. This book contains both technical and review articles.
Download or read book Analysis of Electric Machinery and Drive Systems written by Paul C. Krause and published by John Wiley & Sons. This book was released on 2013-06-17 with total page 693 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introducing a new edition of the popular reference on machine analysis Now in a fully revised and expanded edition, this widely used reference on machine analysis boasts many changes designed to address the varied needs of engineers in the electric machinery, electric drives, and electric power industries. The authors draw on their own extensive research efforts, bringing all topics up to date and outlining a variety of new approaches they have developed over the past decade. Focusing on reference frame theory that has been at the core of this work since the first edition, this volume goes a step further, introducing new material relevant to machine design along with numerous techniques for making the derivation of equations more direct and easy to use. Coverage includes: Completely new chapters on winding functions and machine design that add a significant dimension not found in any other text A new formulation of machine equations for improving analysis and modeling of machines coupled to power electronic circuits Simplified techniques throughout, from the derivation of torque equations and synchronous machine analysis to the analysis of unbalanced operation A unique generalized approach to machine parameters identification A first-rate resource for engineers wishing to master cutting-edge techniques for machine analysis, Analysis of Electric Machinery and Drive Systems is also a highly useful guide for students in the field.
Download or read book Modeling and Modern Control of Wind Power written by Qiuwei Wu and published by John Wiley & Sons. This book was released on 2018-02-05 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: An essential reference to the modeling techniques of wind turbine systems for the application of advanced control methods This book covers the modeling of wind power and application of modern control methods to the wind power control—specifically the models of type 3 and type 4 wind turbines. The modeling aspects will help readers to streamline the wind turbine and wind power plant modeling, and reduce the burden of power system simulations to investigate the impact of wind power on power systems. The use of modern control methods will help technology development, especially from the perspective of manufactures. Chapter coverage includes: status of wind power development, grid code requirements for wind power integration; modeling and control of doubly fed induction generator (DFIG) wind turbine generator (WTG); optimal control strategy for load reduction of full scale converter (FSC) WTG; clustering based WTG model linearization; adaptive control of wind turbines for maximum power point tracking (MPPT); distributed model predictive active power control of wind power plants and energy storage systems; model predictive voltage control of wind power plants; control of wind power plant clusters; and fault ride-through capability enhancement of VSC HVDC connected offshore wind power plants. Modeling and Modern Control of Wind Power also features tables, illustrations, case studies, and an appendix showing a selection of typical test systems and the code of adaptive and distributed model predictive control. Analyzes the developments in control methods for wind turbines (focusing on type 3 and type 4 wind turbines) Provides an overview of the latest changes in grid code requirements for wind power integration Reviews the operation characteristics of the FSC and DFIG WTG Presents production efficiency improvement of WTG under uncertainties and disturbances with adaptive control Deals with model predictive active and reactive power control of wind power plants Describes enhanced control of VSC HVDC connected offshore wind power plants Modeling and Modern Control of Wind Power is ideal for PhD students and researchers studying the field, but is also highly beneficial to engineers and transmission system operators (TSOs), wind turbine manufacturers, and consulting companies.
