Download or read book Control Methods in Polymer Processing written by and published by . This book was released on 1993 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Control Methods in Polymer Processing written by L. Halász and published by Elsevier. This book was released on 2012-12-02 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the process theories and automation levels of the most important polymer processes which are necessary to achieve product quality and process economy. The book describes mixing, calendering, screw plastications, sheet and tube extrusion, film blowing, blow moulding and injection moulding. The control methods employed for each of these individual processes are presented in detail. The book is designed to provide information on static and dynamic processes and viable control systems.

Download or read book Polymer Processing Instabilities written by Savvas G. Hatzikiriakos and published by CRC Press. This book was released on 2004-11-30 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Processing Instabilities: Control and Understanding offers a practical understanding of the various flows that occur during the processing of polymer melts. The book pays particular attention to flow instabilities that affect the rate of production and the methods used to prevent and eliminate flow instabilities in order to increase product

Download or read book Polymer Processing written by Donald G. Baird and published by John Wiley & Sons. This book was released on 2014-03-24 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental concepts coupled with practical, step-by-step guidance With its emphasis on core principles, this text equips readers with the skills and knowledge to design the many processes needed to safely and successfully manufacture thermoplastic parts. The first half of the text sets forth the general theory and concepts underlying polymer processing, such as the viscoelastic response of polymeric fluids and diffusion and mass transfer. Next, the text explores specific practical aspects of polymer processing, including mixing, extrusion dies, and post-die processing. By addressing a broad range of design issues and methods, the authors demonstrate how to solve most common processing problems. This Second Edition of the highly acclaimed Polymer Processing has been thoroughly updated to reflect current polymer processing issues and practices. New areas of coverage include: Micro-injection molding to produce objects weighing a fraction of a gram, such as miniature gears and biomedical devices New chapter dedicated to the recycling of thermoplastics and the processing of renewable polymers Life-cycle assessment, a systematic method for determining whether recycling is appropriate and which form of recycling is optimal Rheology of polymers containing fibers Chapters feature problem sets, enabling readers to assess and reinforce their knowledge as they progress through the text. There are also special design problems throughout the text that reflect real-world polymer processing issues. A companion website features numerical subroutines as well as guidance for using MATLAB®, IMSL®, and Excel to solve the sample problems from the text. By providing both underlying theory and practical step-by-step guidance, Polymer Processing is recommended for students in chemical, mechanical, materials, and polymer engineering.

Download or read book Polymer Process Engineering 97 written by P. D. Coates and published by CRC Press. This book was released on 1997 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the 6th in a series of biennial international conferences which provide a focus on engineering excellence in polymer processing technology. The papers in this volume provide a timely insight covering leading edge developments in polymer processing technology, in-process measurements, process flow modelling and control.

Download or read book Principles of Polymer Processing written by Zehev Tadmor and published by John Wiley & Sons. This book was released on 2013-12-02 with total page 1004 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thoroughly revised edition of the classic text on polymer processing The Second Edition brings the classic text on polymer processing thoroughly up to date with the latest fundamental developments in polymer processing, while retaining the critically acclaimed approach of the First Edition. Readers are provided with the complete panorama of polymer processing, starting with fundamental concepts through the latest current industry practices and future directions. All the chapters have been revised and updated, and four new chapters have been added to introduce the latest developments. Readers familiar with the First Edition will discover a host of new material, including: * Blend and alloy microstructuring * Twin screw-based melting and chaotic mixing mechanisms * Reactive processing * Devolatilization--theory, mechanisms, and industrial practice * Compounding--theory and industrial practice * The increasingly important role of computational fluid mechanics * A systematic approach to machine configuration design The Second Edition expands on the unique approach that distinguishes it from comparative texts. Rather than focus on specific processing methods, the authors assert that polymers have a similar experience in any processing machine and that these experiences can be described by a set of elementary processing steps that prepare the polymer for any of the shaping methods. On the other hand, the authors do emphasize the unique features of particular polymer processing methods and machines, including the particular elementary step and shaping mechanisms and geometrical solutions. Replete with problem sets and a solutions manual for instructors, this textbook is recommended for undergraduate and graduate students in chemical engineering and polymer and materials engineering and science. It will also prove invaluable for industry professionals as a fundamental polymer processing analysis and synthesis reference.

Download or read book Polymer Science and Engineering written by National Research Council and published by National Academies Press. This book was released on 1994-01-01 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers are used in everything from nylon stockings to commercial aircraft to artificial heart valves, and they have a key role in addressing international competitiveness and other national issues. Polymer Science and Engineering explores the universe of polymers, describing their properties and wide-ranging potential, and presents the state of the science, with a hard look at downward trends in research support. Leading experts offer findings, recommendations, and research directions. Lively vignettes provide snapshots of polymers in everyday applications. The volume includes an overview of the use of polymers in such fields as medicine and biotechnology, information and communication, housing and construction, energy and transportation, national defense, and environmental protection. The committee looks at the various classes of polymersâ€"plastics, fibers, composites, and other materials, as well as polymers used as membranes and coatingsâ€"and how their composition and specific methods of processing result in unparalleled usefulness. The reader can also learn the science behind the technology, including efforts to model polymer synthesis after nature's methods, and breakthroughs in characterizing polymer properties needed for twenty-first-century applications. This informative volume will be important to chemists, engineers, materials scientists, researchers, industrialists, and policymakers interested in the role of polymers, as well as to science and engineering educators and students.

Download or read book Plastics and Polymer Processing Automation written by and published by William Andrew. This book was released on 1987 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Control of Polymerization Reactors written by Joseph Schork and published by Routledge. This book was released on 2017-09-20 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference and text provides an in-depth description of developments in control techniques and their application to polymerization reactors and offers important introductory background information on polymerization reaction engineering.;Discussing modelling, identification, linear, nonlinear and multivariable schemes, Control of Polymerization Reactors: presents all available techniques that can be used to control reactors properly for optimal performance; shows how to manipulate pivotal variables that affect reactor control; examines methods for deriving dynamic process models to improve reactor efficiency; reviews reactor control problems and points out end-use properties; supplies methods for measuring process variables, and ways to estimate variables that can't be measured; and explains how single-input, single-output (SISO) strategies can be effectively used for control.;Filled with illustrative examples to clarify concepts, including more than 730 figures, tables and equations, Control of Polymerization Reactors is intended for use as a reference for chemical, process development, process design, research and development, control systems, and polymer engineers; and polymer chemists and physicists; as well as a text for upper-level undergraduate and graduate students in polymerization reactor control courses.

Download or read book Handbook of Polymer Synthesis Characterization and Processing written by Enrique Saldivar-Guerra and published by John Wiley & Sons. This book was released on 2013-02-28 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering a broad range of polymer science topics, Handbook of Polymer Synthesis, Characterization, and Processing provides polymer industry professionals and researchers in polymer science and technology with a single, comprehensive handbook summarizing all aspects involved in the polymer production chain. The handbook focuses on industrially important polymers, analytical techniques, and formulation methods, with chapters covering step-growth, radical, and co-polymerization, crosslinking and grafting, reaction engineering, advanced technology applications, including conjugated, dendritic, and nanomaterial polymers and emulsions, and characterization methods, including spectroscopy, light scattering, and microscopy.

Download or read book Engineering Control Technology Assessment for the Plastics and Resins Industry written by Enviro Control, inc and published by . This book was released on 1978 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Computational Analysis of Polymer Processing written by J.R.A. Pearson and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Large, fast, digital computers have been widely used in engineering practice and their use has had a large impact in many fields. Polymer processing is no exception, and there is already a substantial amount of literature describing ways in which processes can be analysed, designed or controlled using the potentialities of modern computers. The emphasis given varies with the application, and most authors tend to quote the results of their calculations rather than describing in any detail the way the calculations were undertaken or the difficulties experienced in carrying them out. We aim to give here as useful and connected an account as we can of a wide class of applications, for the benefit of scientists and engineers who find themselves working on polymer processing problems and feel the need to undertake such calculations. The major application we have in mind is the simulation of the dynamics ofthe various physical phenomena which arise in a polymer process treated as a complex engineering system. This requires that the system be reasonably well represented by a limited number of relatively simple subprocesses whose connections can be clearly identified, that the domi nant physical effects relevant to each subprocess can be well defined in a suitable mathematical form and that the sets of equations and boundary conditions developed to describe the whole system can be successfully discretised and solved numerically.

Download or read book Structure Development During Polymer Processing written by António M. Cunha and published by Springer. This book was released on 2000-06-30 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: 30 years ago, polymer processing was considered to be a set of operations aiming at imparting a desired shape to the material, while its final properties were defined exclu sively by the molecular structure and architecture resulted from the respective synthetic approaches. These two fields of knowledge - polymer processing and polymer structure - grew closer as several scientific and technological works disclosed the microstructure and other morphological features developed by polymeric systems upon different process ing conditions. Even before the real understanding of the polymer structural details, engineers were able to make use of the effect of molecular orientation and to manufacture polymeric fi bres with enhanced properties in terms of stiffness and strength. However, it was during the 1970s that the scientific community started to relate microstructure development and the thermomechanical environment associated to different processing techniques. Ever since, very important works were done on semi crystalline, amorphous or blended polymers in order to identify and, recently, to predict the effect of the imposed shear fields and cool ing gradients on the final product properties. These efforts led to more accurate process ing methods and stimulated new engineering approaches, such as property enhancement through out-of-the-processing as well as on-line control. Modem processing technology has developed further towards the nano level, enabling impacts on the macromolecular structure.

Download or read book Manufacturing Techniques for Polymer Matrix Composites PMCs written by Suresh G Advani and published by Elsevier. This book was released on 2012-07-18 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer matrix composites are used extensively across a wide range of industries, making the design and development of effective manufacturing processes of great importance. Manufacturing techniques for polymer matrix composites (PMCs) provides an authoritative review of the different technologies employed in the manufacture of this class of composite. Following an introduction to composites and manufacturing processes, part one reviews the manufacturing of short fiber and nanoparticle based polymer matrix composites, with injection and compression molding examined in depth. Thermoplastic processing is the focus of part two. Sheet forming, fabric thermostamping, filament winding and continuous fiber reinforced profiles are investigated. Part three reviews thermoset processing. A survey of resin transfer molding follows, including vacuum-assisted and compression resin transfer molding. The pultrusion process is then considered, before the book concludes with an investigation into autoclave and out-of-autoclave curing processes in polymer matrix composites. With its distinguished editors and international team of expert contributors, Manufacturing techniques for polymer matrix composites (PMCs) is an essential guide for engineers and scientists working in the field of polymer matrix composites. Provides an authoritative review of the different technologies employed in the manufacture of polymer matrix composites Reviews the manufacturing of short fiber and nanoparticle-based polymer matrix composites, with injection and compression molding examined in depth Examines thermoplastic processing, sheet forming, fabric thermostamping, filament winding and continuous fiber reinforced profiles

Download or read book Handbook of Polymer Synthesis Characterization and Processing written by Enrique Saldivar-Guerra and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering a broad range of polymer science topics, Handbook of Polymer Synthesis, Characterization, and Processing provides polymer industry professionals and researchers in polymer science and technology with a single, comprehensive handbook summarizing all aspects involved in the polymer production chain. The handbook focuses on industrially important polymers, analytical techniques, and formulation methods, with chapters covering step-growth, radical, and co-polymerization, crosslinking and grafting, reaction engineering, advanced technology applications, including conjugated, dendritic, and nanomaterial polymers and emulsions, and characterization methods, including spectroscopy, light scattering, and microscopy.

Download or read book Polymer 3D Printing and 3D Copying Technology written by Weimin Yang and published by Springer Nature. This book was released on 2023-07-21 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on 3D printing and molding/ copying technologies and approaches, which innovatively proposes the concept of polymer 3D copying technology. It introduces the two technologies of polymer 3D printing and 3D copying by analogy and elaborates the core principles and processes of polymer 3D copying technology, the composition, basic parameters and structure design of polymer 3D copying machines, precision control methods, defect generation mechanism and solutions of polymer 3D copying products, and also discussed the future development of polymer 3D copying technology. The novel concept of 3D copying is one of the major features of the book, which is particularly suited for readers who are interested in rapid prototyping and molding. The book is based on both traditional and new knowledges, with novel content and concept, focusing on both principles and engineering practice. It systematically reflects the content and application of polymer 3D printing and 3D copying technology, which can benefit researchers, engineers, and students of related majors engaged in the fields of polymer processing, rapid prototyping, 3D printing and molding/ copying, etc.

Download or read book Polymer Mechanochemistry written by Roman Boulatov and published by Springer. This book was released on 2015-10-17 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series Topics in Current Chemistry presents critical reviews of the present and future trends in modern chemical research. The scope of coverage is all areas of chemical science including the interfaces with related disciplines such as biology, medicine and materials science. The goal of each thematic volume is to give the non-specialist reader, whether in academia or industry, a comprehensive insight into an area where new research is emerging which is of interest to a larger scientific audience. Each review within the volume critically surveys one aspect of that topic and places it within the context of the volume as a whole. The most significant developments of the last 5 to 10 years are presented using selected examples to illustrate the principles discussed. The coverage is not intended to be an exhaustive summary of the field or include large quantities of data, but should rather be conceptual, concentrating on the methodological thinking that will allow the non-specialist reader to understand the information presented. Contributions also offer an outlook on potential future developments in the field. Review articles for the individual volumes are invited by the volume editors. Readership: research chemists at universities or in industry, graduate students.