Download or read book Control Loop Performance Monitoring Modeling Diagnosing and Compensating Stiction Phenomenon in Process Control Valves written by Ranganathan Srinivanasan and published by . This book was released on 2005 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Process Control Fundamentals written by Raghunathan Rengaswamy and published by CRC Press. This book was released on 2020-05-31 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of process control has evolved gradually over the years, with emphasis on key aspects including designing and tuning of controllers. This textbook covers fundamental concepts of basic and multivariable process control, and important monitoring and diagnosis techniques. It discusses topics including state-space models, Laplace transform to convert state-space models to transfer function models, linearity and linearization, inversion formulae, conversion of output to time domain, stability analysis through partial fraction expansion, and stability analysis using Routh table and Nyquits plots. The text also covers basics of relative gain array, multivariable controller design and model predictive control. The text comprehensively covers minimum variable controller (MVC) and minimum variance benchmark with the help of solved examples for better understanding. Fundamentals of diagnosis of control loop problems are also explained and explanations are bolstered through solved examples. Pedagogical features including solved problems and unsolved exercises are interspersed throughout the text for better understanding. The textbook is primarily written for senior undergraduate and graduate students in the field of chemical engineering and biochemical engineering for a course on process control. The textbook will be accompanied by teaching resource such a collection of slides for the course material and a includsolution manual for the instructors.
Download or read book Control Loop Performance Monitoring written by Ranganathan Srinivasan and published by LAP Lambert Academic Publishing. This book was released on 2010-10 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Controller Performance Monitoring involves the following three routine activities: (1) monitor the performance of each loop, (2) isolate poorly performing loops and (3) diagnose the cause of poor performance. A typical processing industry installs several hundreds of control loops to achieve the desired process performance. Recent studies reveal that only about one-third of controllers provide acceptable performance, indicating significant commercial benenfits exist in diagnosing and improving the remaining two thirds of the control loops. Recent surveys indicate that 20% to 30% of all control loops oscillate due to valve problems caused by static friction (also referred as stiction). Two different techniques for diagnosing stiction using routine operating data have been proposed. The success of these approaches is built on a new technique that detects and characterizes oscillations in control loops. An integrated solution strategy to compensate stiction is provided. Stiction detection and diagnosis techniques are validated on a large industrial data set.
Download or read book Diagnosis of Process Nonlinearities and Valve Stiction written by Ali Ahammad Shoukat Choudhury and published by Springer Science & Business Media. This book was released on 2008-08-20 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: were published in the series as the contributed volume, Process Control Performance Assessment: From Theory to Implementation with Andrzej Ordys, Damian Uduehi, and Michael Johnson as Editors (ISBN 978-1-84628-623-0, 2007). Along with this good progress in process controller assessment methods, researchers have also been investigating techniques to diagnose what is causing the process or control loop degradation. This requires the use of on-line data to identify faults via new diagnostic indicators of typical process problems. A significant focus of some of this research has been the issue of valve problems; a research direction that has been motivated by some industrial statistics that show up to 40% of control loops having performance degradation attributable to valve problems. Shoukat Choudhury, Sirish Shah, and Nina Thornhill have been very active in this research field for a number of years and have written a coherent and consistent presentation of their many research results as this monograph, Diagnosis of Process Nonlinearities and Valve Stiction. The Advances in Industrial Control series is pleased to welcome this new and substantial contribution to the process diagnostic literature. The reader will find the exploitation of the extensive process data archives created by today’s process computer systems one theme in the monograph. From another viewpoint, the use of higher-order statistics could be considered to provide a continuing link to the earlier methods of the statistical process control paradigm.
Download or read book Detection and Diagnosis of Stiction in Control Loops written by Mohieddine Jelali and published by Springer Science & Business Media. This book was released on 2009-10-13 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the process industries, stiction is the most common performance-limiting valve problem and over the last decade numerous different techniques for overcoming it have been proposed. This book represents a comprehensive presentation of these methods, including their principles, assumptions, strengths and drawbacks. Guidelines and working procedures are provided for the implementation of each method and MATLAB®-based software can be downloaded from www.ualberta.ca/~bhuang/stiction-book enabling readers to apply the methods to their own data. Methods for the limitation of stiction effects are proposed within the general context of: oscillation detection in control loops, stiction detection, diagnosis and stiction quantification and diagnosis of multiple faults. The state-of-the-art algorithms presented in this book are demonstrated and compared in industrial case studies of diverse origin – chemicals, building, mining, pulp and paper, mineral and metal processing.
Download or read book Tuning and Control Loop Performance written by Gregory K. McMillan and published by . This book was released on 1983 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2006 with total page 860 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Control Performance Management in Industrial Automation written by Mohieddine Jelali and published by Springer Science & Business Media. This book was released on 2012-10-31 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control Performance Management in Industrial Automation provides a coherent and self-contained treatment of a group of methods and applications of burgeoning importance to the detection and solution of problems with control loops that are vital in maintaining product quality, operational safety, and efficiency of material and energy consumption in the process industries. The monograph deals with all aspects of control performance management (CPM), from controller assessment (minimum-variance-control-based and advanced methods), to detection and diagnosis of control loop problems (process non-linearities, oscillations, actuator faults), to the improvement of control performance (maintenance, re-design of loop components, automatic controller re-tuning). It provides a contribution towards the development and application of completely self-contained and automatic methodologies in the field. Moreover, within this work, many CPM tools have been developed that goes far beyond available CPM packages. Control Performance Management in Industrial Automation: · presents a comprehensive review of control performance assessment methods; · develops methods and procedures for the detection and diagnosis of the root-causes of poor performance in complex control loops; · covers important issues that arise when applying these assessment and diagnosis methods; · recommends new approaches and techniques for the optimization of control loop performance based on the results of the control performance stage; and · offers illustrative examples and industrial case studies drawn from – chemicals, building, mining, pulp and paper, mineral and metal processing industries. This book will be of interest to academic and industrial staff working on control systems design, maintenance or optimisation in all process industries.
Download or read book Feedback Systems written by Karl Johan Åström and published by Princeton University Press. This book was released on 2021-02-02 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The essential introduction to the principles and applications of feedback systems—now fully revised and expanded This textbook covers the mathematics needed to model, analyze, and design feedback systems. Now more user-friendly than ever, this revised and expanded edition of Feedback Systems is a one-volume resource for students and researchers in mathematics and engineering. It has applications across a range of disciplines that utilize feedback in physical, biological, information, and economic systems. Karl Åström and Richard Murray use techniques from physics, computer science, and operations research to introduce control-oriented modeling. They begin with state space tools for analysis and design, including stability of solutions, Lyapunov functions, reachability, state feedback observability, and estimators. The matrix exponential plays a central role in the analysis of linear control systems, allowing a concise development of many of the key concepts for this class of models. Åström and Murray then develop and explain tools in the frequency domain, including transfer functions, Nyquist analysis, PID control, frequency domain design, and robustness. Features a new chapter on design principles and tools, illustrating the types of problems that can be solved using feedback Includes a new chapter on fundamental limits and new material on the Routh-Hurwitz criterion and root locus plots Provides exercises at the end of every chapter Comes with an electronic solutions manual An ideal textbook for undergraduate and graduate students Indispensable for researchers seeking a self-contained resource on control theory
Download or read book Modelling Monitoring and Diagnostic Techniques for Fluid Power Systems written by John Watton and published by Springer Science & Business Media. This book was released on 2007-03-24 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the background theory of fluid power and indicates the range of concepts needed for a modern approach to condition monitoring and fault diagnosis. The theory is leavened by 15-years-worth of practical measurements by the author, working with major fluid power companies, and real industrial case studies. Heavily supported with examples drawn from real industrial plants – the methods in this book have been shown to work.
Download or read book Control Loop Foundation written by Terrence L. Blevins and published by ISA. This book was released on 2011 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this in-depth book, the authors address the concepts and terminology that are needed to work in the field of process control. The material is presented in a straightforward manner that is independent of the control system manufacturer. It is assumed that the reader may not have worked in a process plant environment and may be unfamiliar with the field devices and control systems. Much of the material on the practical aspects of control design and process applications is based on the authors personal experience gained in working with process control systems. Thus, the book is written to act as a guide for engineers, managers, technicians, and others that are new to process control or experienced control engineers who are unfamiliar with multi-loop control techniques. After the traditional single-loop and multi-loop techniques that are most often used in industry are covered, a brief introduction to advanced control techniques is provided. Whether the reader of this book is working as a process control engineer, working in a control group or working in an instrument department, the information will set the solid foundation needed to understand and work with existing control systems or to design new control applications. At various points in the chapters on process characterization and control design, the reader has an opportunity to apply what was learned using web-based workshops. The only items required to access these workshops are a high-speed Internet connection and a web browser. Dynamic process simulations are built into the workshops to give the reader a realistic "hands-on" experience. Also, one chapter of the book is dedicated to techniques that may be used to create process simulations using tools that are commonly available within most distributed control systems. At various points in the chapters on process characterization and control design, the reader has an opportunity to apply what was learned using web-based workshops. The only items required to access these workshops are a high-speed Internet connection and a web browser. Dynamic process simulations are built into the workshops to give the reader a realistic "hands-on" experience. Also, one chapter of the book is dedicated to techniques that may be used to create process simulations using tools that are commonly available within most distributed control systems. As control techniques are introduced, simple process examples are used to illustrate how these techniques are applied in industry. The last chapter of the book, on process applications, contains several more complex examples from industry that illustrate how basic control techniques may be combined to meet a variety of application requirements. As control techniques are introduced, simple process examples are used to illustrate how these techniques are applied in industry. The last chapter of the book, on process applications, contains several more complex examples from industry that illustrate how basic control techniques may be combined to meet a variety of application requirements.
Download or read book Control System Design written by Graham Clifford Goodwin and published by Pearson. This book was released on 2001 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt: For both undergraduate and graduate courses in Control System Design. Using a "how to do it" approach with a strong emphasis on real-world design, this text provides comprehensive, single-source coverage of the full spectrum of control system design. Each of the text's 8 parts covers an area in control--ranging from signals and systems (Bode Diagrams, Root Locus, etc.), to SISO control (including PID and Fundamental Design Trade-Offs) and MIMO systems (including Constraints, MPC, Decoupling, etc.).
Download or read book Linear Controller Design written by Stephen P. Boyd and published by . This book was released on 1991 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Control Performance Assessment Theoretical Analyses and Industrial Practice written by Paweł D. Domański and published by Springer Nature. This book was released on 2019-09-01 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive review of currently available Control Performance Assessment methods. It covers a broad range of classical and modern methods, with a main focus on assessment practice, and is intended to help practitioners learn and properly perform control assessment in the industrial reality. Further, it offers an educational guide for control engineers, who are currently in high demand in the industry. The book consists of three main parts. Firstly, a comprehensive review of available approaches is presented and discussed. The classical canon methods are extended with a discussion of nonlinear and complex alternative measures using non-Gaussian statistics, persistence and fractional calculations. Secondly, the methods’ applicability aspects are visualized with the aid of computer simulations, covering the most popular control philosophies used in the process industry. Lastly, a critical review of the methods discussed, on the basis of real-world industrial examples, rounds out the coverage.
Download or read book Adaptive Control of Nonsmooth Dynamic Systems written by Gang Tao and published by Springer Science & Business Media. This book was released on 2001-09-26 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many of the non-smooth, non-linear phenomena covered in this well-balanced book are of vital importance in almost any field of engineering. Contributors from all over the world ensure that no one area’s slant on the subjects predominates.
Download or read book Dynamic Modeling of Complex Industrial Processes Data driven Methods and Application Research written by Chao Shang and published by Springer. This book was released on 2019-03-19 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis develops a systematic, data-based dynamic modeling framework for industrial processes in keeping with the slowness principle. Using said framework as a point of departure, it then proposes novel strategies for dealing with control monitoring and quality prediction problems in industrial production contexts. The thesis reveals the slowly varying nature of industrial production processes under feedback control, and integrates it with process data analytics to offer powerful prior knowledge that gives rise to statistical methods tailored to industrial data. It addresses several issues of immediate interest in industrial practice, including process monitoring, control performance assessment and diagnosis, monitoring system design, and product quality prediction. In particular, it proposes a holistic and pragmatic design framework for industrial monitoring systems, which delivers effective elimination of false alarms, as well as intelligent self-running by fully utilizing the information underlying the data. One of the strengths of this thesis is its integration of insights from statistics, machine learning, control theory and engineering to provide a new scheme for industrial process modeling in the era of big data.
Download or read book Wearable Robots written by José L. Pons and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: A wearable robot is a mechatronic system that is designed around the shape and function of the human body, with segments and joints corresponding to those of the person it is externally coupled with. Teleoperation and power amplification were the first applications, but after recent technological advances the range of application fields has widened. Increasing recognition from the scientific community means that this technology is now employed in telemanipulation, man-amplification, neuromotor control research and rehabilitation, and to assist with impaired human motor control. Logical in structure and original in its global orientation, this volume gives a full overview of wearable robotics, providing the reader with a complete understanding of the key applications and technologies suitable for its development. The main topics are demonstrated through two detailed case studies; one on a lower limb active orthosis for a human leg, and one on a wearable robot that suppresses upper limb tremor. These examples highlight the difficulties and potentialities in this area of technology, illustrating how design decisions should be made based on these. As well as discussing the cognitive interaction between human and robot, this comprehensive text also covers: the mechanics of the wearable robot and it’s biomechanical interaction with the user, including state-of-the-art technologies that enable sensory and motor interaction between human (biological) and wearable artificial (mechatronic) systems; the basis for bioinspiration and biomimetism, general rules for the development of biologically-inspired designs, and how these could serve recursively as biological models to explain biological systems; the study on the development of networks for wearable robotics. Wearable Robotics: Biomechatronic Exoskeletons will appeal to lecturers, senior undergraduate students, postgraduates and other researchers of medical, electrical and bio engineering who are interested in the area of assistive robotics. Active system developers in this sector of the engineering industry will also find it an informative and welcome resource.
