Download or read book Control of Linear Parameter Varying Systems with Applications written by Javad Mohammadpour and published by Springer Science & Business Media. This book was released on 2012-03-08 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control of Linear Parameter Varying Systems compiles state-of-the-art contributions on novel analytical and computational methods for addressing system identification, model reduction, performance analysis and feedback control design and addresses address theoretical developments, novel computational approaches and illustrative applications to various fields. Part I discusses modeling and system identification of linear parameter varying systems, Part II covers the importance of analysis and control design when working with linear parameter varying systems (LPVS) , Finally, Part III presents an applications based approach to linear parameter varying systems, including modeling of a turbocharged diesel engines, Multivariable control of wind turbines, modeling and control of aircraft engines, control of an autonomous underwater vehicles and analysis and synthesis of re-entry vehicles.

Download or read book Optimization and Control with Applications written by Liqun Qi and published by Springer Science & Business Media. This book was released on 2006-03-30 with total page 587 pages. Available in PDF, EPUB and Kindle. Book excerpt: A collection of 28 refereed papers grouped according to four broad topics: duality and optimality conditions, optimization algorithms, optimal control, and variational inequality and equilibrium problems. Suitable for researchers, practitioners and postgrads.

Download or read book Introduction to Microcontroller Programming for Power Electronics Control Applications written by Mattia Rossi and published by CRC Press. This book was released on 2021-09-29 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microcontroller programming is not a trivial task. Indeed, it is necessary to set correctly the required peripherals by using programming languages like C/C++ or directly machine code. Nevertheless, MathWorks® developed a model-based workflow linked with an automatic code generation tool able to translate Simulink® schemes into executable files. This represents a rapid prototyping procedure, and it can be applied to many microcontroller boards available on the market. Among them, this introductory book focuses on the C2000 LaunchPadTM family from Texas InstrumentsTM to provide the reader basic programming strategies, implementation guidelines and hardware considerations for some power electronics-based control applications. Starting from simple examples such as turning on/off on-board LEDs, Analog-to-Digital conversion, waveform generation, or how a Pulse-Width-Modulation peripheral should be managed, the reader is guided through the settings of the specific MCU-related Simulink® blocks enabled for code translation. Then, the book proposes several control problems in terms of power management of RL and RLC loads (e.g., involving DC-DC converters) and closed-loop control of DC motors. The control schemes are investigated as well as the working principles of power converter topologies needed to drive the systems under investigation. Finally, a couple of exercises are proposed to check the reader’s understanding while presenting a processor-in-the loop (PIL) technique to either emulate the dynamics of complex systems or testing computational performance. Thus, this book is oriented to graduate students of electrical and automation and control engineering pursuing a curriculum in power electronics and drives, as well as to engineers and researchers who want to deepen their knowledge and acquire new competences in the design and implementations of control schemes aimed to the aforementioned application fields. Indeed, it is assumed that the reader is well acquainted with fundamentals of electrical machines and power electronics, as well as with continuous-time modeling strategies and linear control techniques. In addition, familiarity with sampled-data, discrete-time system analysis and embedded design topics is a plus. However, even if these competences are helpful, they are not essential, since this book provides some basic knowledge even to whom is approaching these topics for the first time. Key concepts are developed from scratch, including a brief review of control theory and modeling strategies for power electronic-based systems.

Download or read book Control Applications for Biomedical Engineering Systems written by Ahmad Taher Azar and published by Academic Press. This book was released on 2020-01-22 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control Applications for Biomedical Engineering Systems presents different control engineering and modeling applications in the biomedical field. It is intended for senior undergraduate or graduate students in both control engineering and biomedical engineering programs. For control engineering students, it presents the application of various techniques already learned in theoretical lectures in the biomedical arena. For biomedical engineering students, it presents solutions to various problems in the field using methods commonly used by control engineers. Points out theoretical and practical issues to biomedical control systems Brings together solutions developed under different settings with specific attention to the validation of these tools in biomedical settings using real-life datasets and experiments Presents significant case studies on devices and applications

Download or read book Control System Applications written by William S. Levine and published by CRC Press. This book was released on 2018-10-24 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control technology permeates every aspect of our lives. We rely on them to perform a wide variety of tasks without giving much thought to the origins of the technology or how it became such an important part of our lives. Control System Applications covers the uses of control systems, both in the common and in the uncommon areas of our lives. From the everyday to the unusual, it's all here. From process control to human-in-the-loop control, this book provides illustrations and examples of how these systems are applied. Each chapter contains an introduction to the application, a section defining terms and references, and a section on further readings that help you understand and use the techniques in your work environment. Highly readable and comprehensive, Control System Applications explores the uses of control systems. It illustrates the diversity of control systems and provides examples of how the theory can be applied to specific practical problems. It contains information about aspec ts of control that are not fully captured by the theory, such as techniques for protecting against controller failure and the role of cost and complexity in specifying controller designs.

Download or read book Control Applications of Nonlinear Programming and Optimization 1989 written by H.B. Siguerdidjane and published by Elsevier. This book was released on 2014-07-04 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: These Proceedings provide valuable information on the exchange of ideas between scientists who apply nonlinear programming and optimization to real world control problems and those who develop new methods, algorithms and software. The papers deal with windshear problems, optimization of aircraft and spacecraft trajectories, optimal control for robots, the optimization of urban traffic control, general mechanical systems, multilevel inventory systems and robust control.

Download or read book Distributed Control Applications written by Alois Zoitl and published by CRC Press. This book was released on 2017-12-19 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distributed Control Applications: Guidelines, Design Patterns, and Application Examples with the IEC 61499 discusses the IEC 61499 reference architecture for distributed and reconfigurable control and its adoption by industry. The book provides design patterns, application guidelines, and rules for designing distributed control applications based on the IEC 61499 reference model. Moreover, examples from various industrial domains and laboratory environments are introduced and explored.

Download or read book Recent Advances in Electrical Engineering and Control Applications written by Mohammed Chadli and published by Springer. This book was released on 2016-12-01 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book of proceedings includes papers presenting the state of art in electrical engineering and control theory as well as their applications. The topics focus on classical as well as modern methods for modeling, control, identification and simulation of complex systems with applications in science and engineering. The papers were selected from the hottest topic areas, such as control and systems engineering, renewable energy, faults diagnosis—faults tolerant control, large-scale systems, fractional order systems, unconventional algorithms in control engineering, signals and communications. The control and design of complex systems dynamics, analysis and modeling of its behavior and structure is vitally important in engineering, economics and in science generally science today. Examples of such systems can be seen in the world around us and are a part of our everyday life. Application of modern methods for control, electronics, signal processing and more can be found in our mobile phones, car engines, home devices like washing machines is as well as in such advanced devices as space probes and systems for communicating with them. All these technologies are part of technological backbone of our civilization, making further research and hi-tech applications essential. The rich variety of contributions appeals to a wide audience, including researchers, students and academics.

Download or read book Fractional Order Systems Modeling And Control Applications written by Riccardo Caponetto and published by World Scientific. This book was released on 2010-02-10 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to propose the implementation and application of Fractional Order Systems (FOS). It is well known that FOS can be utilized in control applications and systems modeling, and their effectiveness has been proven in many theoretical works and simulation routines. A further and mandatory step for FOS real world utilization is their hardware implementation and applications on real systems modeling. With this viewpoint, introductory chapters are included on the definition of stability region of Fractional Order PID Controller and Chaotic FOS, followed by the practical implementation based on Microcontroller, Field Programmable Gate Array, Field Programmable Analog Array and Switched Capacitor. Another section is dedicated to FO modeling of Ionic Polymeric Metal Composite (IPMC). This new material will have applications in robotics, aerospace and biomedicine.

Download or read book Nonlinear and Adaptive Control with Applications written by Alessandro Astolfi and published by Springer Science & Business Media. This book was released on 2007-12-06 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors here provide a detailed treatment of the design of robust adaptive controllers for nonlinear systems with uncertainties. They employ a new tool based on the ideas of system immersion and manifold invariance. New algorithms are delivered for the construction of robust asymptotically-stabilizing and adaptive control laws for nonlinear systems. The methods proposed lead to modular schemes that are easier to tune than their counterparts obtained from Lyapunov redesign.

Download or read book Control Applications of Vehicle Dynamics written by Jingsheng Yu and published by CRC Press. This book was released on 2021-12-20 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents essential knowledge of car vehicle dynamics and control theory with NI LabVIEW software product application, resulting in a practical yet highly technical guide for designing advanced vehicle dynamics and vehicle system controllers. Presenting a clear overview of fundamental vehicle dynamics and vehicle system mathematical models, the book covers linear and non-linear design of model based controls such as wheel slip control, vehicle speed control, path following control, vehicle stability and rollover control, stabilization of vehicle-trailer system. Specific applications to autonomous vehicles are described among the methods. It details the practical applications of Kalman-Bucy filtering and the observer design for sensor signal estimation, alongside lateral vehicle dynamics and vehicle rollover dynamics. The book also discusses high level controllers, alongside a clear explanation of basic control principles for regenerative braking in both electric and hybrid vehicles, and wheel torque vectoring systems. Concrete LabVIEW simulation examples of how the models and controls are used in representative applications, along with software algorithms and LabVIEW block diagrams are illustrated. It will be of interest to engineering students, automotive engineering students and automotive engineers and researchers.

Download or read book Quality Control Applications in the Pharmaceutical and Medical Device Manufacturing Industry written by Carrillo-Cedillo, Eugenia Gabriela and published by IGI Global. This book was released on 2022-03-18 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quality control in pharmaceutical products and medical devices is vital for users as failing to comply with national and international regulations can lead to accidents that could easily be avoided. For this reason, manufacturing a quality medical product will support patient safety. Microbiologists working in both the pharmaceutical and medical device industries face considerable challenges in keeping abreast of the myriad microbiological references available to them and the continuously evolving regulatory requirements. Quality Control Applications in the Pharmaceutical and Medical Device Manufacturing Industry presents the importance of quality control in pharmaceutical products and medical devices, which must have very high-quality standards to not cause problems to the health of patients. It reinforces and updates the knowledge of analytical, instrumental, and biological methods to demonstrate the correct quality control and good manufacturing practice for pharmaceutical products and medical devices. Covering topics such as pharmaceutical nano systems, machine learning, and software validation, this book is an essential resource for managers, engineers, supervisors, pharmacists, chemists, academicians, and researchers.

Download or read book Human machine Interface Design for Process Control Applications written by Jean-Yves Fiset and published by ISA. This book was released on 2009 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work provides users and designers of industrial control and monitoring systems with an easy-to-use, yet effective, method to configure, design, and validate human-machine interfaces. It includes systems such as distributed control systems, supervisory control and data acquisition systems, and stand-alone units.

Download or read book Extremum Seeking Control and Applications written by Chunlei Zhang and published by Springer Science & Business Media. This book was released on 2011-10-26 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extremum-seeking control tracks a varying maximum or minimum in a performance function such as output or cost. It attempts to determine the optimal performance of a control system as it operates, thereby reducing downtime and the need for system analysis. Extremum-seeking Control and Applications is divided into two parts. In the first, the authors review existing analog-optimization-based extremum-seeking control including gradient-, perturbation- and sliding-mode-based control designs. They then propose a novel numerical-optimization-based extremum-seeking control based on optimization algorithms and state regulation. This control design is developed for simple linear time-invariant systems and then extended for a class of feedback linearizable nonlinear systems. The two main optimization algorithms – line search and trust region methods – are analyzed for robustness. Finite-time and asymptotic state regulators are put forward for linear and nonlinear systems respectively. Further design flexibility is achieved using the robustness results of the optimization algorithms and the asymptotic state regulator by which existing nonlinear adaptive control techniques can be introduced for robust design. The approach used is easier to implement and tends to be more robust than those that use perturbation-based extremum-seeking control. The second part of the book deals with a variety of applications of extremum-seeking control: a comparative study of extremum-seeking control schemes in antilock braking system design; source seeking, formation control, collision and obstacle avoidance for groups of autonomous agents; mobile radar networks; and impedance matching. MATLAB®/Simulink® code which can be downloaded from www.springer.com/ISBN helps readers to reproduce the results presented in the text and gives them a head start for implementing the algorithms in their own applications. Extremum-seeking Control and Applications will interest academics and graduate students working in control, and industrial practitioners from a variety of backgrounds: systems, automotive, aerospace, communications, semiconductor and chemical engineering.

Download or read book Fuzzy Neural Networks for Real Time Control Applications written by Erdal Kayacan and published by Butterworth-Heinemann. This book was released on 2015-10-07 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: AN INDISPENSABLE RESOURCE FOR ALL THOSE WHO DESIGN AND IMPLEMENT TYPE-1 AND TYPE-2 FUZZY NEURAL NETWORKS IN REAL TIME SYSTEMS Delve into the type-2 fuzzy logic systems and become engrossed in the parameter update algorithms for type-1 and type-2 fuzzy neural networks and their stability analysis with this book! Not only does this book stand apart from others in its focus but also in its application-based presentation style. Prepared in a way that can be easily understood by those who are experienced and inexperienced in this field. Readers can benefit from the computer source codes for both identification and control purposes which are given at the end of the book. A clear and an in-depth examination has been made of all the necessary mathematical foundations, type-1 and type-2 fuzzy neural network structures and their learning algorithms as well as their stability analysis. You will find that each chapter is devoted to a different learning algorithm for the tuning of type-1 and type-2 fuzzy neural networks; some of which are: • Gradient descent • Levenberg-Marquardt • Extended Kalman filter In addition to the aforementioned conventional learning methods above, number of novel sliding mode control theory-based learning algorithms, which are simpler and have closed forms, and their stability analysis have been proposed. Furthermore, hybrid methods consisting of particle swarm optimization and sliding mode control theory-based algorithms have also been introduced. The potential readers of this book are expected to be the undergraduate and graduate students, engineers, mathematicians and computer scientists. Not only can this book be used as a reference source for a scientist who is interested in fuzzy neural networks and their real-time implementations but also as a course book of fuzzy neural networks or artificial intelligence in master or doctorate university studies. We hope that this book will serve its main purpose successfully. Parameter update algorithms for type-1 and type-2 fuzzy neural networks and their stability analysis Contains algorithms that are applicable to real time systems Introduces fast and simple adaptation rules for type-1 and type-2 fuzzy neural networks Number of case studies both in identification and control Provides MATLAB® codes for some algorithms in the book

Download or read book Optimal Control Theory with Applications in Economics written by Thomas A. Weber and published by MIT Press. This book was released on 2011-09-30 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: A rigorous introduction to optimal control theory, with an emphasis on applications in economics. This book bridges optimal control theory and economics, discussing ordinary differential equations, optimal control, game theory, and mechanism design in one volume. Technically rigorous and largely self-contained, it provides an introduction to the use of optimal control theory for deterministic continuous-time systems in economics. The theory of ordinary differential equations (ODEs) is the backbone of the theory developed in the book, and chapter 2 offers a detailed review of basic concepts in the theory of ODEs, including the solution of systems of linear ODEs, state-space analysis, potential functions, and stability analysis. Following this, the book covers the main results of optimal control theory, in particular necessary and sufficient optimality conditions; game theory, with an emphasis on differential games; and the application of control-theoretic concepts to the design of economic mechanisms. Appendixes provide a mathematical review and full solutions to all end-of-chapter problems. The material is presented at three levels: single-person decision making; games, in which a group of decision makers interact strategically; and mechanism design, which is concerned with a designer's creation of an environment in which players interact to maximize the designer's objective. The book focuses on applications; the problems are an integral part of the text. It is intended for use as a textbook or reference for graduate students, teachers, and researchers interested in applications of control theory beyond its classical use in economic growth. The book will also appeal to readers interested in a modeling approach to certain practical problems involving dynamic continuous-time models.

Download or read book Optimization in Control Applications written by Guillermo Valencia-Palomo and published by MDPI. This book was released on 2019-01-10 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Optimization in Control Applications" that was published in MCA