Download or read book Heat Transfer in Polymer Composite Materials written by Nicolas Boyard and published by John Wiley & Sons. This book was released on 2016-03-28 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses general information, good practices and examples about thermo-physical properties, thermo-kinetic and thermo-mechanical couplings, instrumentation in thermal science, thermal optimization and infrared radiation.

Download or read book Carbon Black written by Jean-Baptiste Donnet and published by Routledge. This book was released on 2018-05-04 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this reference provides comprehensive examinations of developments in the processing and applications of carbon black, including the use of new analytical tools such as scanning tunnelling microscopy, Fourier transform infrared spectroscopy and inverse gas chromatography.;Completely rewritten and updated by numerous experts in the field to reflect the enormous growth of the field since the publication of the previous edition, Carbon Black: discusses the mechanism of carbon black formation based on recent advances such as the discovery of fullerenes; elucidates micro- and macrostructure morphology and other physical characteristics; outlines the fractal geometry of carbon black as a new approach to characterization; reviews the effect of carbon black on the electrical and thermal conductivity of filled polymers; delineates the applications of carbon black in elastomers, plastics, and zerographic toners; and surveys possible health consequences of exposure to carbon black.;With over 1200 literature citations, tables, and figures, this resource is intended for physical, polymer, surface and colloid chemists; chemical and plastics engineers; spectroscopists; materials scientists; occupational safety and health physicians; and upper-level undergraduate and graduate students in these disciplines.

Download or read book Mechanical Identification of Composites written by A. Vautrin and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nonmetallic Materials and Composites at Low Temperature written by G. Hartwig and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This, the second special topical conference on the properties of Non-Metallic Materials at Low Temperatures, was sponsored by the International Cryogenic Materials Conference Board. The potential for plastics materials in the field of cryogenics is vast and as yet only partly explored. In addition, many other materials, which qualify for the title non-metallic but are not 'plastics', have numerous possible outlets in low temperature technology. This conference aimed at providing a forum, whereby specialists from Industry, the Universities and from Government sponsored Institutions could assemble to discuss the extent of our current knowledge. As it transpired, the meeting was also to high light the considerable gaps that still exist in our fundamental understanding of the low temperature behaviour of these materials. On this theme, during the course of the conference, a reference was made to an almost forgotten quotation by Lord Kelvin, who said: "When you cannot measure what you are speaking about, when you cannot express in numbers, your knowledge is of a meagre and unsatisfactory kind; it may be the beginning of knowledge, but you have scarcely in your thoughts advanced to the stage of a science, whatever the matter be." This simple statement sums up the aims, objectives and hopefully the achievements of this conference. To discuss and disseminate the current knowledge on non-metallic materials in order that realistic predictions of in-service performance may be made.

Download or read book Natural Fibre Composites written by Alma THULE and published by Woodhead Publishing. This book was released on 2014-02-13 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of natural fibres as reinforcements in composites has grown in importance in recent years. Natural Fibre Composites summarises the wealth of significant recent research in this area. Chapters in part one introduce and explore the structure, properties, processing, and applications of natural fibre reinforcements, including those made from wood and cellulosic fibres. Part two describes and illustrates the processing of natural fibre composites. Chapters discuss ethical practices in the processing of green composites, manufacturing methods and compression and injection molding techniques for natural fibre composites, and thermoset matrix natural fibre-reinforced composites. Part three highlights and interprets the testing and properties of natural fibre composites including, non-destructive and high strain rate testing. The performance of natural fibre composites is examined under dynamic loading, the response of natural fibre composites to impact damage is appraised, and the response of natural fibre composites in a marine environment is assessed. Natural Fibre Composites is a technical guide for professionals requiring an understanding of natural fibre composite materials. It offers reviews, applications and evaluations of the subject for researchers and engineers. - Introduces and explores the structure, properties, processing, and applications of natural fibre reinforcements, including those made from wood and cellulosic fibres - Highlights and interprets the testing and properties of natural fibre composites, including non-destructive and high strain rate testing - Examines performance of natural fibre composites under dynamic loading, the response of natural fibre composites to impact damage, and the response of natural fibre composites in a marine environment

Download or read book Recent Advances in Integrated Design and Manufacturing in Mechanical Engineering written by Grigore Gogu and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent advances in the integration and the optimization of product design and manufacturing systems. The book is divided into 3 chapters corresponding to the following three main topics : - optimization of product design process (mechanical design process, mass customization, modeling the product representation, computer support for engineering design, support systems for tolerancing, simulation and optimization tools for structures and for mechanisms and robots), -optimization of manufacturing systems (multi-criteria optimization and fuzzy volumes, tooth path generation, machine-tools behavior, surface integrity and precision, process simulation), - methodological aspects of integrated design and manufacturing (solid modeling, collaborative tools and knowledge formalization, integrating product and process design and innovation, robust and reliable design, multi-agent approach in VR environment). The present book is of interest to engineers, researchers, academic staff, and postgraduate students interested in integrated design and manufacturing in mechanical engineering.

Download or read book Advances in Material Forming written by Francisco Chinesta and published by Springer Science & Business Media. This book was released on 2007-10-27 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book groups the main advances in material forming, considering different processes, both conventional and non-conventional. It focuses on polymers, composites and metals, which are analyzed from the state of the art. Special emphasis is devoted to the contributions of the European Scientific Association for Material Forming (ESAFORM) during the last decade and in particular the ones coming from its annual international conference.

Download or read book Inelastic Analysis of Structures under Variable Loads written by Dieter Weichert and published by Springer Science & Business Media. This book was released on 2001-11-30 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: The question whether a structure or a machine component can carry the applied loads, and with which margin of safety, or whether it will become unserviceable due to collapse or excessive inelastic deformations, has always been a major concern for civil and mechanical engineers. The development of methods to answer this technologically crucial question without analysing the evolution of the system under varying loads, has a long tradition that can be traced back even to the times of emerging mechanical sciences in the early 17th century. However, the scientific foundations of the theories underlying these methods, nowadays frequently called "direct", were established sporadically in the Thirties of the 20th century and systematically and rigorously in the Fifties. Further motivations for the development of direct analysis techniques in applied mechanics of solids and structures arise from the circumstance that in many engineering situations the external actions fluctuate according to time histories not a priori known except for some essential features, e.g. variation intervals. In such situations the critical events (or "limit states") to consider, besides plastic collapse, are incremental collapse (or "ratchetting") and alternating plastic yielding, namely lack of "shakedown". Non evolutionary, direct methods for ultimate limit state analysis of structures subjected to variably-repeated external actions are the objectives of most papers collected in this book, which also contains a few contributions on related topics.

Download or read book Adhesion Between Polymers and Concrete Adh sion Entre Polym res Et B ton written by H. R. Sasse and published by Springer. This book was released on 1986 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt: Preface Adhesion is a phenomenon architects and civil engineers are not very familiar with. In other disciplines knowledge about surface properties and the background of bonding energies is also far from satisfactory; nevertheless there are many important· applications in concrete engineering, where adhesion is necessary for success and durability. These include: - coating and painting - repair of concrete surfaces - bonding of fresh to old concrete - crack injection - glueing of precast elements - glueing of steel to concrete, etc. In 1981 RILEM established the technical committee 52-RAC 'Resin Adherence to Concrete'. The main aims of the committee's work were - to collect research results and practical experiences - to initiate and coordinate research programs - to develop, on a scientific base, test methods for field and for laboratory purposes. One of the results of the committee's work is a state-of-the-art report, which will be presented orally as a General Report at the International Symposium ISAP '86, and will be printed either in the RILEM journal Materials and Structures or separately. Several test recommendations have been elaborated and will be prepared as drafts for the participants ofISAP '86. These are: - direct tensile test - pull-off test - direct shear test - slant shear test - four-point bending test - dynamic loading test - thermal compatibility test (two versions) - injectibility test.

Download or read book Inelastic Behaviour of Structures under Variable Loads written by Zenon Mróz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of papers is a state of the art presentation of theories and methods related to the problem of the behaviour of mechanical structures under variable loads beyond their elastic limit In particular, the problems of shakedown, ratchetting, transient and asymptotic cyclic states are addressed. The volume is composed of four chapters devoted to material modelling for cyclic loading conditions; general theory of accommodated states of structures; effects of changes of the geometry on the inelastic structural response; and numerical techniques with applications to particular engineering problems. It was aimed to provide a unified approach in order to understand both inelastic material and structural response under variable loading conditions. The attempt to extend the classical shakedown theory of Melan and Koiter to geometrically non-linear problems is presented in several papers. The industrial application of cyclic plasticity to the analysis and the design of pressure bellows, compensators, turbine disks, or flange connections under thermal and pressure cycles illustrates the great potential of the numerical techniques developed for this purpose using mostly min-max approaches. The treatment of railway problems and the analysis and optimisation of pavements are further examples of important areas of applications. Emphasis was laid on approaches that take into account the fact that loading histories are often not precisely known Therefore, the center of interest lies in other than step by step calculation methods.

Download or read book Materials and Acoustics Handbook written by Michel Bruneau and published by John Wiley & Sons. This book was released on 2013-05-10 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a group of acoustics and vibration specialists, this book studies the acoustic and vibrating phenomena that occur in diverse materials used for all kinds of purposes. The first part studies the fundamental aspects of propagation: analytical, numerical and experimental. The second part outlines industrial and medical applications. Covering a wide range of topics that associate materials science with acoustics, this will be of invaluable use to researchers, engineers, or practitioners in this field, as well as students in acoustics, physics, and mechanics.

Download or read book Ceramic Materials written by Philippe Boch and published by John Wiley & Sons. This book was released on 2010-01-05 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is primarily an introduction to the vast family of ceramic materials. The first part is devoted to the basics of ceramics and processes: raw materials, powders synthesis, shaping and sintering. It discusses traditional ceramics as well as “technical” ceramics – both oxide and non-oxide – which have multiple developments. The second part focuses on properties and applications, and discusses both structural and functional ceramics, including bioceramics. The fields of abrasion, cutting and tribology illustrate the importance of mechanical properties. It also deals with the questions/answers of a ceramicist regarding electronuclear technology. As chemistry is an essential discipline for ceramicists, the book shows, in particular, what soft chemistry can contribute as a result of sol-gel methods.

Download or read book Continuum Damage Mechanics Theory and Application written by Dusan Krajcinovic and published by Springer. This book was released on 2014-05-04 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Structural Health Monitoring written by Daniel Balageas and published by John Wiley & Sons. This book was released on 2010-01-05 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is organized around the various sensing techniques used to achieve structural health monitoring. Its main focus is on sensors, signal and data reduction methods and inverse techniques, which enable the identification of the physical parameters, affected by the presence of the damage, on which a diagnostic is established. Structural Health Monitoring is not oriented by the type of applications or linked to special classes of problems, but rather presents broader families of techniques: vibration and modal analysis; optical fibre sensing; acousto-ultrasonics, using piezoelectric transducers; and electric and electromagnetic techniques. Each chapter has been written by specialists in the subject area who possess a broad range of practical experience. The book will be accessible to students and those new to the field, but the exhaustive overview of present research and development, as well as the numerous references provided, also make it required reading for experienced researchers and engineers.

Download or read book Encyclopedia of Continuum Mechanics written by Holm Altenbach and published by Springer. This book was released on 2020-01-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Encyclopedia covers the entire science of continuum mechanics including the mechanics of materials and fluids. The encyclopedia comprises mathematical definitions for continuum mechanical modeling, fundamental physical concepts, mechanical modeling methodology, numerical approaches and many fundamental applications. The modelling and analytical techniques are powerful tools in mechanical civil and areospsace engineering, plus in related fields of plasticity, viscoelasticity and rheology. Tensor-based and reference-frame-independent, continuum mechanics has recently found applications in geophysics and materials.

Download or read book Recent Advances and Future Trends in Pavement Engineering written by Patricia Kara de Maeijer and published by Mdpi AG. This book was released on 2020-08-13 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue "Recent Advances and Future Trends in Pavement Engineering" was proposed and organized to present recent developments in the field of innovative pavement materials and engineering. The 12 articles and state-of-the-art reviews highlighted in this editorial are related to different aspects of pavement engineering, from recycled asphalt pavements to alkali-activated materials, from hot mix asphalt concrete to porous asphalt concrete, from interface bonding to modal analysis, and from destructive testing to non-destructive pavement monitoring by using fiber optics sensors. This Special Issue partly provides an overview of current innovative pavement engineering ideas that have the potential to be implemented in industry in the future, covering some recent developments.

Download or read book Nucleating Agents written by Stuart Fairgrieve and published by iSmithers Rapra Publishing. This book was released on 2007-11 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: A very important factor in obtaining optimised physical properties from a semi-crystalline polymer is the size of the crystalline structures present in the material, and this crucially depends on the initiation process of crystallisation of the polymer from the melt - nucleation. This review provides information on the development of materials and methods for influencing the nucleation of polymer crystallisation in commercial processing by means of addition of low levels of adjuvants specifically selected for this purpose.