Download or read book Recent Advances in Robot Kinematics written by Jadran Lenarčič and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: The articles of this book were reported and discussed at the fifth international symposium on Advances in Robot Kinematics. As is known, the first symposium of this series was organised in 1988 in Ljubljana. The following meetings took place every other year in Austria, Italy, and Slovenia (Linz, Ferrara, Ljubljana, Portoroz Bernardin). It must be emphasised that the symposia run under the patronage of the International Federation for the Theory of Machinesand Mechanisms, IFToMM. In this period, Advances in Robot Kinematics has been able to attract the most outstanding authors in the area and also to create an optimum combination of a scientific pragmatism and a friendly atmosphere. Hence, it has managed to survive in a strong competition of many international conferences and meetings. In the most ancient way, robot kinematics is regarded as an application of the kinematics of rigid hodies. However, there are topics and problems that are typical for robot kinematics that cannot easily be found in any other scientific field. It is our belief that the initiative of Advances in Robot Kinematics has contributed to develop a remarkable scientific community. The present book is of interest to researchers, doctoral students and teachers, engineers and mathematicians specialising in kinematics of robots and mechanisms, mathematical modelling, simulation, design, and control of robots.
Download or read book Modelling and Simulation written by International Association of Science and Technology for Development and published by ACTA Press. This book was released on 1983 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings written by H. van Brussel and published by IFS, Limited. This book was released on 1986 with total page 1268 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mini and Microcomputers and Their Applications written by M. H. Hamza and published by Anaheim [Calif.] ; Calgary : Acta Press. This book was released on 1984 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sliding Mode Control In Engineering written by Wilfrid Perruquetti and published by CRC Press. This book was released on 2002-01-29 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides comprehensive coverage of the most recent developments in the theory of non-Archimedean pseudo-differential equations and its application to stochastics and mathematical physics--offering current methods of construction for stochastic processes in the field of p-adic numbers and related structures. Develops a new theory for parabolic equat
Download or read book Parallel Robots written by J.P. Merlet and published by Springer. This book was released on 2000-07-31 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Parallel robots are closed-loop mechanisms presenting very good performances in terms of accuracy, rigidity and ability to manipulate large loads. Parallel robots have been used in a large number of applications ranging from astronomy to flight simulators and are becoming increasingly popular in the field of machine-tool industry. This book presents a complete synthesis of the latest results on the possible mechanical architectures, analysis and synthesis of this type of mechanism. It is intended to be used by students (with over 100 exercises and numerous Internet addresses), researchers (with over 500 references and anonymous ftp access to the code of some algorithms presented in this book) and engineers (for which practical results and applications are presented).
Download or read book Advances in Robot Kinematics written by Jadran Lenarčič and published by Springer. This book was released on 2014-05-19 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topics addressed in this book cover the whole range of kinematic analysis, synthesis and design and consider robotic systems possessing serial, parallel and cable driven mechanisms. The robotic systems range from being less than fully mobile to kinematically redundant to over constrained. The fifty-six contributions report the latest results in robot kinematics with emphasis on emerging areas such as design and control of humanoids or humanoid subsystems. The book is of interest to researchers wanting to bring their knowledge up to date regarding modern topics in one of the basic disciplines in robotics, which relates to the essential property of robots, the motion of mechanisms.
Download or read book Dynamics of Parallel Robots written by Sébastien Briot and published by Springer. This book was released on 2015-06-22 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book starts with a short recapitulation on basic concepts, common to any types of robots (serial, tree structure, parallel, etc.), that are also necessary for computation of the dynamic models of parallel robots. Then, as dynamics requires the use of geometry and kinematics, the general equations of geometric and kinematic models of parallel robots are given. After, it is explained that parallel robot dynamic models can be obtained by decomposing the real robot into two virtual systems: a tree-structure robot (equivalent to the robot legs for which all joints would be actuated) plus a free body corresponding to the platform. Thus, the dynamics of rigid tree-structure robots is analyzed and algorithms to obtain their dynamic models in the most compact form are given. The dynamic model of the real rigid parallel robot is obtained by closing the loops through the use of the Lagrange multipliers. The problem of the dynamic model degeneracy near singularities is treated and optimal trajectory planning for crossing singularities is proposed. Lastly, the approach is extended to flexible parallel robots and the algorithms for computing their symbolic model in the most compact form are given. All theoretical developments are validated through experiments.
Download or read book Le Nouvel automatisme written by and published by . This book was released on 1981 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Robotic Systems written by S.G. Tzafestas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robotics is a modern interdisciplinary field that has emerged from the marriage of computerized numerical control and remote manipulation. Today's robotic systems have intelligence features, and are able to perform dexterous and intelligent human-like actions through appropriate combination of learning, perception, planning, decision making and control. This book presents advanced concepts, techniques and applications reflecting the experience of a wide group of specialists in the field. Topics include: kinematics, dynamics, path planning and tracking, control, mobile robotics, navigation, robot programming, and sophisticated applications in the manufacturing, medical, and other areas.
Download or read book Flexible Joint Robots written by Mark C. Readman and published by CRC Press. This book was released on 1994-07-13 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: Joint flexibility from harmonic or direct drives or flexible couplings limits the performance of robots. Performance can be improved by taking into account the fast dynamics that are introduced by joint flexibility. High gain acceleration feedback from the link angles simplifies the robot dynamics, but is limited by joint flexibility. One solution is to use joint torque feedback to stabilize the fast dynamics. In light of this, drive systems that incorporate joint torque sensors are being developed. Flexible Joint Robots is the first book to consider the myriad problems and potential solutions that affect flexible joint robot design. The book covers fundamental concepts, including joint torque feedback control laws, acceleration feedback, and adaptive control laws. It presents a dynamic model of a flexible joint robot in several coordinate systems and includes an analysis of the fast dynamics.
Download or read book Parallel Kinematic Machines written by C.R. Boer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Parallel Kinematic Machines (PKMs) are one of the most radical innovations in production equipment. They attempt to combine the dexterity of robots with the accuracy of machine tools to respond to several industrial needs. This book contains the proceedings of the first European-American Forum on Parallel Kinematic Machines, held in Milan, Italy from 31 August - 1 September 1998. The Forum was established to provide institutions, technology suppliers and industrial end users with an improved understanding of the real advantages to be gained from using PKMs. This book contributes to a mid-term strategy oriented to reduce time to market and costs, improve production flexibility and minimize environmental impacts to increase worldwide competitiveness. In particular the authors focus on enabling technologies and emerging concepts for future manufacturing applications of PKMs. Topics include: Current status of PKM R&D in Europe, the USA and Asia. Industrial requirements, roadblocks and application opportunities. Research issues and possibilities. Industrial applications and requirements.
Download or read book Latest Advances in Robot Kinematics written by Jadran Lenarcic and published by Springer Science & Business Media. This book was released on 2012-05-19 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is of interest to researchers inquiring about modern topics and methods in the kinematics, control and design of robotic manipulators. It considers the full range of robotic systems, including serial, parallel and cable driven manipulators, both planar and spatial. The systems range from being less than fully mobile to kinematically redundant to overconstrained. In addition to recognized areas, this book also presents recent advances in emerging areas such as the design and control of humanoids and humanoid subsystems, and the analysis, modeling and simulation of human body motions, as well as the mobility analysis of protein molecules and the development of machines which incorporate man.
Download or read book Surface Tension in Microsystems written by Pierre Lambert and published by Springer Science & Business Media. This book was released on 2013-08-31 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes how surface tension effects can be used by engineers to provide mechanical functions in miniaturized products (1 mm). Even if precursors of this field such as Jurin or Laplace already date back to the 18th century, describing surface tension effects from a mechanical perspective is very recent.brThe originality of this book is to consider the effects of capillary bridges on solids, including forces and torques exerted both statically and dynamically by the liquid along the 6 degrees-of-freedom.brIt provides a comprehensive approach to various applications, such as capillary adhesion (axial force), centering force in packaging and micro-assembly (lateral force) and recent developments such as a capillary motor (torque).
Download or read book Dynamics of Manipulation Robots written by M. Vukobratovic and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph represents the first book of the series entitled "SCI ENTIFIC FUNDAMENTALS OF ROBOTICS". The aim of this monograph is to ap proach the dynamics of active mechanisms from the standpoint of its application to the synthesis of complex motion and computer-aided de sign of manipulation mechanisms with some optimal performances. The rapid development of a new class of mechanisms, which may be referred to as active mechanisms, contributed to their application in various environments (from underwater to cosmic) . Because of some specific fea tures, these mechanisms require very careful description, both in a mechanical sense (kinematic and dynamic) and in the synthesis of algo rithms for precise tracking of the above motion under insufficiently defined operating conditions. Having also in mind the need for a very fast (even real-time) calculation of system dynamics and for eliminating, in principle, the errors made when forming mathematical models "by hand" this monograph will primarily present methods for automatic for mUlation of dynamic equations of motion of active spatial mechanisms. Apart from these computer-oriented methods, mention will be made of all those methods which have preceded the computer-oriented procedures, predominantly developed for different problems of rigid body dynamics. If we wish to systematically establish the origins of the scientific discipline, which could be called robot dynamics, we must recall some groups and individuals, who, by solving actual problems in the synthe sis and control of artificial motion, have contributed to a gradual formation of this discipline.
Download or read book Advances in Interdisciplinary Engineering written by Niraj Kumar and published by Springer Nature. This book was released on 2021-04-12 with total page 838 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the select proceedings of the International Conference on Future Learning Aspects of Mechanical Engineering (FLAME) 2020. This volume focuses on several emerging interdisciplinary areas involving mechanical engineering. Some of the topics covered include automobile engineering, mechatronics, applied mechanics, structural mechanics, hydraulic mechanics, human vibration, biomechanics, biomedical Instrumentation, ergonomics, biodynamic modeling, nuclear engineering, and agriculture engineering. The contents of this book will be useful for students, researchers as well as professionals interested in interdisciplinary topics of mechanical engineering.
Download or read book Government Reports Annual Index written by and published by . This book was released on 1993 with total page 1290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sections 1-2. Keyword Index.--Section 3. Personal author index.--Section 4. Corporate author index.-- Section 5. Contract/grant number index, NTIS order/report number index 1-E.--Section 6. NTIS order/report number index F-Z.
