Download or read book Modeling Identification and Control of Robots written by Wisama Khalil and published by CRC Press. This book was released on 2002 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Robot Manipulators written by Etienne Dombre and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the most recent research results on modeling and control of robot manipulators. Chapter 1 gives unified tools to derive direct and inverse geometric, kinematic and dynamic models of serial robots and addresses the issue of identification of the geometric and dynamic parameters of these models. Chapter 2 describes the main features of serial robots, the different architectures and the methods used to obtain direct and inverse geometric, kinematic and dynamic models, paying special attention to singularity analysis. Chapter 3 introduces global and local tools for performance analysis of serial robots. Chapter 4 presents an original optimization technique for point-to-point trajectory generation accounting for robot dynamics. Chapter 5 presents standard control techniques in the joint space and task space for free motion (PID, computed torque, adaptive dynamic control and variable structure control) and constrained motion (compliant force-position control). In Chapter 6, the concept of vision-based control is developed and Chapter 7 is devoted to specific issue of robots with flexible links. Efficient recursive Newton-Euler algorithms for both inverse and direct modeling are presented, as well as control methods ensuring position setting and vibration damping.
Download or read book Modeling Identification and Control of Robots written by W. Khalil and published by Butterworth-Heinemann. This book was released on 2004-07-01 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by two of Europe's leading robotics experts, this book provides the tools for a unified approach to the modelling of robotic manipulators, whatever their mechanical structure. No other publication covers the three fundamental issues of robotics: modelling, identification and control. It covers the development of various mathematical models required for the control and simulation of robots.·World class authority·Unique range of coverage not available in any other book·Provides a complete course on robotic control at an undergraduate and graduate level
Download or read book Robotics and Factories of the Future 87 written by R. Radharamanan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers presented at the Second International Conference on Robotics and Factories of the Future held in San Diego, California, USA during July 28-31, 1987 are compiled in this volume. Over two hundred participants attended the conference, made technical presentations and discussed about various aspects of manufacturing, robotics and factories of the future. The number of papers published in this volume and the number of unpublished presentations at the conference indicates the evidance of growing interest in the areas of CAD/CAM, robotics and their role in future factories. The conference consisted of five plenary sessions, twenty three technical sessions, workshops, and exhibits from local industries and educational institutions. I wish to acknowledge with many thanks the contributions of all the authors who presented their work at the conference and submitted the manuscripts for publication. It is also my pleasure to acknowledge the role of keynote, banquet, and plenary sessions speakers whose contributions added greatly to the success of the conference. My sincere thanks to all session chairmen. I wish that the series of the International Conferences on Robotics and Factories of the Future which was initiated in 1984 in Charlotte, North Carolina will have a major impact on the use of robots and computers in the automated factories of the future.
Download or read book Mobile Robotics written by Luc Jaulin and published by John Wiley & Sons. This book was released on 2019-12-12 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mobile Robotics presents the different tools and methods that enable the design of mobile robots; a discipline booming with the emergence of flying drones, underwater mine-detector robots, robot sailboats and vacuum cleaners. Illustrated with simulations, exercises and examples, this book describes the fundamentals of modeling robots, developing the concepts of actuators, sensors, control and guidance. Three-dimensional simulation tools are also explored, as well as the theoretical basis for the reliable localization of robots within their environment. This revised and updated edition contains additional exercises and a completely new chapter on the Bayes filter, an observer that enhances our understanding of the Kalman filter and facilitates certain proofs.
Download or read book Computing Techniques for Robots written by Igor Aleksander and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: I. ALEKSANDER Kobler Unit for Information Technology Management, Imperial College of Science and Technology, London, England It is now over half a decade since Joseph Engelberger wrote: 'Given a six-articulation arm of any configuration, software can be powerful enough to think only in tool coordinates. That is, a programmer concerns himself only with the tool on the end of the robot arm. He can think of the tool's frame of reference and com puter subroutines automatically make the various articulations move so as to accomplish the desired tool manipulation. ' As is often the case with statements of this kind, they are appealing and generally well-founded in technological feasibility. But in order to turn the prediction into reality it requires the dedication and in ventiveness of an international community of researchers. The object of this book is to provide a window on to some of the advances made by this community which go towards the fulfilment of Engelberger's predictions. A significant factor in the framework within which this work is being pursued is the phenomenal advance in the availability of inex pensive and highly compact computing power. It becomes increas ingly possible to imagine powerful microprocessors providing local intelligence at key points in a robot arm Uoints, gripper, etc) by being connected through a communications network and controlled by some specially designated supervisory microchip.
Download or read book Modelling and Simulation written by International Association of Science and Technology for Development and published by ACTA Press. This book was released on 1983 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Control of Manipulation Robots written by M. Vukobratovic and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph represents the second book of the series entitled: "SCI ENTIFIC FUNDAl-1ENTALS OF ROBOTICS". While the first volume provides a study of the dynamics of spatial mechanisms and its application to the design of these mechanisms, the present one focuses on the synthesis -of control based~n the knowledge of dynamic models (presented in de tail in the first_ volume). In this way a logical continuity is formed in which one may easily recognize a "dynamic" approach to the design of manipulation r-obots and the synthesis of control algorithms based on exact mathematical models of dynamics of open spatial mechanisms. When writing the monograph, the authors had the following objective: to prove that a study of dynamic properties of manipulation mechanisms is justifiable, to use the dynamic properties in the synthesis of con trol algorithms, and to determine, from one case to another, a proper measure of dynamics depending on the type of manipulation task, the "v$!locity at which "it is carried out, and on the type of the manipu- tion mechanisms itself. The authors believe they have thus made the study of dynamics,' aimed at synthesizing algorithms for dynamic con trol, free from unnecessary academicism and allowed the readers to apply all the results presented here to practical purposes of manipu lator design in thfil broader sense of the word. At this point, the au thors would like to present some concepts which were their guidelines in preparing this text.
Download or read book International Encyclopedia of Robotics written by Richard C. Dorf and published by Wiley-Interscience. This book was released on 1988 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 13th International Symposium on Industrial Robots and Robots 7 Future directions written by and published by . This book was released on 1983 with total page 910 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Parallel Robots written by J.-P. Merlet and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: Parallel robots are closed-loop mechanisms presenting very good performances in terms of accuracy, rigidity and ability to manipulate large loads. Parallel robots have been used in a large number of applications ranging from astronomy to flight simulators and are becoming increasingly popular in the field of machine-tool industry. This book presents a complete synthesis of the latest results on the possible mechanical architectures, analysis and synthesis of this type of mechanism. It is intended to be used by students (with over 100 exercises and numerous Internet addresses), researchers (with over 500 references and anonymous ftp access to the code of some algorithms presented in this book) and engineers (for which practical results and applications are presented).
Download or read book Developments in Robotics 1983 written by Brian Rooks and published by . This book was released on 1983 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamics of Manipulation Robots written by M. Vukobratovic and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph represents the first book of the series entitled "SCI ENTIFIC FUNDAMENTALS OF ROBOTICS". The aim of this monograph is to ap proach the dynamics of active mechanisms from the standpoint of its application to the synthesis of complex motion and computer-aided de sign of manipulation mechanisms with some optimal performances. The rapid development of a new class of mechanisms, which may be referred to as active mechanisms, contributed to their application in various environments (from underwater to cosmic) . Because of some specific fea tures, these mechanisms require very careful description, both in a mechanical sense (kinematic and dynamic) and in the synthesis of algo rithms for precise tracking of the above motion under insufficiently defined operating conditions. Having also in mind the need for a very fast (even real-time) calculation of system dynamics and for eliminating, in principle, the errors made when forming mathematical models "by hand" this monograph will primarily present methods for automatic for mUlation of dynamic equations of motion of active spatial mechanisms. Apart from these computer-oriented methods, mention will be made of all those methods which have preceded the computer-oriented procedures, predominantly developed for different problems of rigid body dynamics. If we wish to systematically establish the origins of the scientific discipline, which could be called robot dynamics, we must recall some groups and individuals, who, by solving actual problems in the synthe sis and control of artificial motion, have contributed to a gradual formation of this discipline.
Download or read book Principles of Robot Modelling and Simulation written by Saïd M. Megahed and published by John Wiley & Sons. This book was released on 1993 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Software in Robotics written by A. Danthine and published by North Holland. This book was released on 1984 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers kinematic and dynamic modelling, adaptive control, computer languages, geometric modelling, systems architecture, computing aspects of sensing devices, and artificial intelligence.
Download or read book Robot Control written by Claude Samson and published by . This book was released on 1991 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete approach to the problem of controlling robot manipulators needs to bring together three scientific branches: computer science, mechanics, and automatic control.
Download or read book Advanced Robotics 1989 written by Kenneth J. Waldron and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Fourth International Conference on Advanced Robotics was held in Columbus, Ohio, U. S. A. on June 13th to 15th, 1989. The first two conferences in this series were held in Tokyo. The third was held in Versailles, France in October 1987. The International Conference on Advanced Robotics is affiliated with the International Federation of Robotics. This conference was sponsored by The Ohio State University. The American Society of Mechanical Engineers was a cooperating co-sponsor. The objective of the International Conference on Advanced Robotics is to provide an international exchange of information on the topic of advanced robotics. This was adopted as one of the themes for international research cooperation at a meeting of representatives of seven industrialized countries held in Williamsburg, U. S. A. in May 1983. The present conference is truly international in character with contributions from authors of twelve countries. (Bulgaria, Canada, France, Great Britain, India, Italy, Japan, Peoples Republic of China, Poland, Republic of China, Spain, United States of America.) The subject matter of the papers is equally diverse, covering most technical areas of robotics. The authors are distinguished. They are leaders in the field in their respective countries. The International Conference on Advanced Robotics has always particularly encouraged papers oriented to the design of robotic systems, or to research directed at advanced applications in service robotics, construction, nuclear power, agriculture, mining, underwater systems, and space systems.
