Download or read book CONTRIBUTION A L ETUDE DE LA STRUCTURE ELECTRONIQUE DU SILICIUM AMORPHE PUR ET DU SILICIUM AMORPHE HYDROGENE written by N'GUESSAN.. KRE and published by . This book was released on 1993 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: CE TRAVAIL PORTE SUR L'ETUDE EXPERIMENTALE DE L'INFLUENCE DU DESORDRE STRUCTURAL SUR LA DENSITE D'ETATS ELECTRONIQUES DANS LA BANDE INTERDITE DU SILICIUM AMORPHE PUR (ASI) ET DU SILICIUM AMORPHE HYDROGENE (ASI:H). POUR CELA, LE COEFFICIENT D'ABSORPTION A ETE DEDUIT DE MESURES DE TRANSMISSION OPTIQUE ET DE LA SPECTROSCOPIE DE DEFLEXION PHOTOTHERMIQUE (PDS). EN OUTRE, DES MESURES DE RESONANCE PARAMAGNETIQUE ELECTRONIQUE (RPE) ET DE SPECTROSCOPIE INFRAROUGE ONT ETE EGALEMENT UTILISEES. LES FILMS DE ASI ONT ETE OBTENUS PAR EVAPORATION EN ULTRA-VIDE SUR SUBSTRAT DE QUARTZ A LA TEMPERATURE AMBIANTE; ON A FAIT VARIER LE DESORDRE DE CES FILMS PAR RECUIT. POUR LES FILMS DE SSI:H, UNE CELLULE A PLASMA RF A PERMIS DE FAIRE VARIER LA CONCENTRATION D'HYDROGENE, DONC LE DESORDRE DES FILMS. POUR LES FILMS DE ASI, ON A OBTENU UNE DISTRIBUTION DE LA DENSITE D'ETATS EN CONSIDERANT DIFFERENTES APPROXIMATIONS TANT SUR LE MODELE DE LA DENSITE D'ETATS QUE SUR LA DEPENDANCE EN ENERGIE DES ELEMENTS DE MATRICE. ON TROUVE QUE LE GAP OPTIQUE ET LA DENSITE DE SPINS (LIAISONS PENDANTES) VARIENT RELATIVEMENT PEU AVEC LE DESORDRE PAR RAPPORT AUX FILMS DE ASI:H. ON TROUVE EGALEMENT QUE LA POSITION EN ENERGIE DES ETATS PARAMAGNETIQUES EST D'ENVIRON 0,9 EV PAR RAPPORT AU BAS DE LA BANDE DE CONDUCTION. POUR LES FILMS DE ASI:H, ON A OBTENU DES RESULTATS QUI SONT TRES PROCHES DE CEUX DES FILMS PREPARES PAR DECOMPOSITION DU SILANE. ON A EGALEMENT OBTENU UNE BONNE CORRELATION ENTRE LA DENSITE DE SPINS ET L'ABSORPTION A BASSE ENERGIE. LA FORTE VARIATION RELATIVE DU GAP OPTIQUE AVEC LE DESORDRE STRUCTURAL, COMPAREE A CELLE DE ASI, PERMET DE SUGGERER QUE LA VARIATION DU GAP N'EST PAS SEULEMENT DUE A UN EFFET DU DESORDRE MAIS EGALEMENT A UN EFFET D'ALLIAGE DU SILICIUM AVEC L'HYDROGENE. LA DENSITE DE SPINS DANS LES MEILLEURS FILMS OBTENUS SANS RECUITS (10#1#7 SPINS CM##3) N'EST PAS TRES ELOIGNEE DE CELLE DES MEILLEURS FILMS RECUITS OBTENUS PAR DECOMPOSITION DU SILANE (10#1#6 SPINS CM##3)

Download or read book Contribution l tude de la structure lectronique du silicium amorphe hydrog n written by François Boulitrop and published by . This book was released on 1982 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: ETUDE DE LA STRUCTURE ELECTRONIQUE DE A-SI:H PAR RPE, PHOTOLUMINESCENCE ET DOUBLE RESONANCE OPTIQUE HERTZIENNE. PROPOSITION D'UN MODELE D'ETATS RADIATIFS DE QUEUES DE BANDE. ESTIMATION DES PROFONDEURS DES QUEUES DE BANDES DE VALENCE ET DE CONDUCTION. ESTIMATION DE LA DUREE DE VIE DES PORTEURS PHOTOEXCITES ET DE LEUR LONGUEUR DE DIFFUSION

Download or read book ICREEC 2019 written by Ahmed Belasri and published by Springer Nature. This book was released on 2020-06-10 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights peer reviewed articles from the 1st International Conference on Renewable Energy and Energy Conversion, ICREEC 2019, held at Oran in Algeria. It presents recent advances, brings together researchers and professionals in the area and presents a platform to exchange ideas and establish opportunities for a sustainable future. Topics covered in this proceedings, but not limited to, are photovoltaic systems, bioenergy, laser and plasma technology, fluid and flow for energy, software for energy and impact of energy on the environment.

Download or read book Modelling in Aquatic Chemistry written by OECD Nuclear Energy Agency and published by Nuclear Energy Agency. This book was released on 1997 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Physics Briefs written by and published by . This book was released on 1983 with total page 856 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Soil Analysis written by Marc Pansu and published by Springer Science & Business Media. This book was released on 2007-04-18 with total page 996 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is a reference guide for selecting and carrying out numerous methods of soil analysis. It is written in accordance with analytical standards and quality control approaches. It covers a large body of technical information including protocols, tables, formulae, spectrum models, chromatograms and additional analytical diagrams. The approaches are diverse, from the simplest tests to the most sophisticated determination methods.

Download or read book Model Cellulosic Surfaces written by Maren Roman and published by OUP USA. This book was released on 2010-04-08 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of the different methods of model cellulosic surface preparation and presents recent studies on the properties of these surfaces. The topics covered are considered relatively new and would serve as the launch pad for further research in this area.

Download or read book Layer Silicates written by Sturges W. Bailey and published by . This book was released on 1967 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Soil Analysis written by J. Gautheyrou and published by CRC Press. This book was released on 2001-01-01 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to provide a better understanding of tools for soil analysis in order to use them more efficiently. It covers sampling problems as well as difficulties relating to actual analysis and quality control.

Download or read book The Boundaries of the West African Craton written by Nasser Ennih and published by Geological Society of London. This book was released on 2008 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Chemistry of Silica written by Ralph K. Iler and published by Wiley-Interscience. This book was released on 1979-06-06 with total page 904 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surfactants and Interfacial Phenomena Milton J. Rosen Bridging the gap between purely theoretical aspects of surface chemistry and the purely empirical experience of the industrial technologist, this book applies theoretical surface chemistry to understanding the action of surfactants in modifying interfacial phenomena. It surveys the structural types of commercially available surfactants and discusses interfacial phenomena, the physicochemical principles underlying the action of surfactants in each phenomenon, and the effect of structural changes in the surfactants and environmental changes on their action. Tables of data on various interfacial properties of surfactants, compiled and calculated from the latest scientific literature, are included. 1978 304 pp. An Introduction to Clay Colloid Chemistry, 2nd Ed. H. van Olphen This book provides valuable guidance in research and design efforts by giving a clear understanding of principles and concepts of colloid chemistry as applied to clay systems. Updated and enlarged, this edition includes new information on surface characterization and adsorption mechanisms; recent results in the area of clay-organic interaction--the intercalation and intersalation of kaolinite minerals; and increased attention to the possible role of clays in biological evolution. 1977 318 pp. Physicochemical Processes for Water Quality Control Walter J. Weber, Jr. Focusing on physicochemical rather than biological processes, this book presents a comprehensive treatise on the treatment of municipal and industrial water and wastewater. All of the physicochemical processes important to municipal and industrial water and wastewater treatment--coagulation, filtration, membrane processes, chemical oxidation, and others--are included and each is covered thoroughly from principle through application. To maintain a high level of expertise, contributions have been incorporated from specialists actively involved in research or engineering applications in each area considered. 1972 640 pp.

Download or read book Frontiers in Materials Processing Applications Research and Technology written by M. Muruganant and published by Springer. This book was released on 2017-11-13 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises the select proceedings of FiMPART 2015. The volume covers advances in major areas of materials research under one umbrella. This volume covers all aspects of materials research, processing, fabrication, structure/property evaluation, applications of ferrous, non-ferrous, ceramic, polymeric materials and composites including biomaterials, materials for energy, fuel cells/hydrogen storage technologies, batteries, super-capacitors, nano-materials for energy and structural applications, aerospace structural metallic materials, bulk metallic glasses and other advanced materials. The book will be useful to researchers, students, and professional working in areas related to materials innovation and applications.

Download or read book Chemical Thermodynamics of Neptunium and Plutonium written by Robert J. Lemire and published by Elsevier. This book was released on 2001-08-26 with total page 876 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unlike earlier books in this series, this review describes the selection of chemical thermodynamic data for species of two elements, neptunium and plutonium. Although this came about more by circumstance than design, it has allowed for a more consistent approach to chemical interpretation than might have occurred in two separate treatments. It has also drawn attention to cases where the available data do not show expected parallels, and where further work may be useful to confirm or refute apparent differences in the behaviour of neptunium and plutonium.

Download or read book Dictionary of Civil Engineering written by Jean-Paul Kurtz and published by Springer Science & Business Media. This book was released on 2004-09-14 with total page 1520 pages. Available in PDF, EPUB and Kindle. Book excerpt: I am pleased to present a work which marks a milestone in the history of public works and, more precisely, in that of permanent structures—a comprehensive dictionary of Civil Engineering terms. Since the beginning of time, Man has always tried to find a means to clear the obstacles which nature erected to displace him. With the first tree trunk thrown across a river, man sought to improve the crossing structure. After the invention of the wheel, and to satisfy his thirst for conquest (Roman ways), and comfort (aqueducts), man built bridges that became a preremptory necessity to move quickly. Thus, Man started to build wooden and masonry works. With the passing centuries, the builders became masters in the art of building masonry works. Then came the Industrial Revolution and the advent of the steel (1864), which was closely followed by the invention of the reinforced concrete (1855). The need for railways and improving the road network inspired great works of crossing such as viaducts and tunnels. The boom of the railway network and the development of the car required the construction of an increasing number of new structures. This phenomenon continues today with hundreds of structures built each year throughout the world.

Download or read book Atomic Calculation of Photoionization Cross sections and Asymmetry Parameters written by J.-J. Yeh and published by Gordon & Breach Science Pub. This book was released on 1993-01-01 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the results of atomic calculations of subshell and total photoionization cross-sections and asymmetry parameters as a function of photon energies below 1.5 KeV. The book provides graphical data for the dipole-length approximation and includes ASCII text data on floppy diskettes for all approximations calculated in the same model. The data files may be exported to IBM PC/XT and AT or compatible computers or printers. Installation requires 6Mb of temporary memory. j.J. Yeh, AT&T Bell Laboratories, Murray Hill, New Jersey, USA

Download or read book Physical vapor deposition and thermal stability of hard oxide coatings written by Ludvig Landälv and published by Linköping University Electronic Press. This book was released on 2019-04-26 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt: The state-of-the-art tools for machining metals are primarily based on a metal-ceramic composite (WC-Co) coated with different combinations of carbide, nitride, and oxide coatings. Combinations of these coating materials are optimized to withstand specific wear conditions. Oxide coatings, mainly α-Al2O3, are especially desired because of their high hot-hardness, chemical inertness with respect to the workpiece, and their low friction. The search for possible alloy elements, which may facilitate the deposition of such oxides by means of physical vapor deposition (PVD) techniques, has been the goal of this thesis. The sought alloy should form thermodynamically stable or metastable compounds, compatible with the temperature of use in metal cutting application. This thesis deals with process development and coating characterization of such new oxide alloy thin films, focusing on the Al-V-O, Al-Cr-Si-O, and Cr-Zr-O systems. Alloying aluminum oxide with iso-valent vanadium is a candidate for forming the desired alloys. Therefore, coatings of (Al1-xVx)2O3, with x ranging from 0 to 1, were deposited with reactive sputter deposition. X-ray diffraction showed three different crystal structures depending on V-metal fraction in the coating: α-V2O3 rhombohedral structure for 100 at.% V, a defect spinel structure for the intermediate region, (63 - 42 at.% V), and a gamma-alumina-like solid solution at lower V-content, (18 and 7 at.%), were observed, the later was shifted to larger d-spacing compared to the pure γ-Al2O3 sample obtained if deposited with only Al-target. Annealing the Al-rich coatings in air resulted in formation of V2O5 crystals on the surface of the coating after annealing to 500 °C for 42 at.% V and 700 °C for 18 at.% V metal fraction respectively. The highest thermal stability was shown for pure γ-Al2O3-coating which transformed to α-Al2O3 after annealing to 1100° C. Highest hardness was observed for the Al-rich oxides, ~24 GPa. The hardness then decreases with increasing V-content, larger than 7 at.% V metal fraction. Doping the Al2O3 coating with 7 at.% V resulted in a significant surface smoothening compared to the binary oxide. The measured hardness after annealing in air decreased in conjunction with the onset of further oxidation of the coatings. This work increases the understanding of this complicated material system with respect to possible phases formed with pulsed DC magnetron sputtering deposition as well as their response to annealing in air. The inherent difficulties of depositing insulating oxide films with PVD, requiring a closed electrical circuit, makes the investigation of process stability an important part of this research. In this context, I investigated the influence of adding small amount of Si in Al-Cr cathode on the coating properties in a pulsed DC industrial cathodic arc system and the plasma characteristics, process parameters, and coating properties in a lab DC cathodic arc system. Si was chosen here due to a previous study showing improved erosion behavior of Al-Cr-Si over pure Al-Cr cathode without Si incorporation in the coating. The effect of Si in the Al-Cr cathode in the industrial cathodic arc system showed slight improvements on the cathode erosion but Si was found in all coatings where Si was added in the cathode. The Si addition promoted the formation of the B1-like metastable cubic oxide phase and the incorporation led to reduced or equal hardness values compared to the corresponding Si-free processes. The DC-arc plasma study on the same material system showed only small improvements in the cathode erosion and process stability (lower pressure and cathode voltage) when introducing 5 at.% Si in the Al70Cr30-cathode. The presence of volatile SiO species could be confirmed through plasma analysis, but the loss of Si through these species was negligible, since the coating composition matched the cathode composition also under these conditions. The positive effect of added Si on the process stability at the cathode surface, should be weighed against Si incorporation in the coating. This incorporation seems to lead to a reduction in mechanical properties in the as-deposited coatings and promote the formation of a B1-like cubic metastable oxide structure for the (Al,Cr)2O3 oxide. This formation may or may not be beneficial for the final application since literature indicates a slight stabilization of the metastable phase upon Si-incorporation, contrary to the effect of Cr, which stabilizes the α-phase. The thermal stability of alloys for metal cutting application is crucial for their use. Previous studies on another alloy system, Cr-Zr-O, had shown solid solution, for Cr-rich compositions in that material system, in the sought corundum structure. The thermal stability of α-Cr0.28Zr0.10O0.61 coating deposited by reactive radio frequency (RF)-magnetron sputtering at 500 °C was therefore investigated here after annealing in vacuum up to 870 °C. The annealed samples showed transformation of α-(Cr,Zr)2O3 and amorphous ZrOx-rich areas into tetragonal ZrO2 and bcc-Cr. The instability of the α-(Cr,Zr)2O3 is surprising and possibly related to the annealing being done under vacuum, facilitating the loss of oxygen. Further in situ synchrotron XRD annealing studies on the α-Cr0.28Zr0.10O0.61 coating in air and in vacuum showed increased stability for the air annealed sample up to at least 975 °C, accompanied with a slight increase in ex-situ measured nanohardness. The onset temperature for formation of tetragonal ZrO2 was similar to that for isothermally vacuum annealing. The synchrotron-vacuum annealed coating again decomposed into bcc-Cr and t-ZrO2, with an addition of monoclinic–ZrO2 due to grain growth. The stabilization of the room temperature metastable tetragonal ZrO2 phase, due to surface energy effects present with small grains sizes, may prove to be useful for metal cutting applications. The observed phase segregation of α-(Cr,Zr)2O3 and formation of tetragonal ZrO2 with corresponding increase in hardness for this pseudobinary oxide system also opens up design routes for pseudobinary oxides with tunable microstructural and mechanical properties.

Download or read book Agrochimica written by International Atomic Energy Agency and published by . This book was released on 1977 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organic matter and soil productivity; Turnover of plant residues; Mineralization of organic compounds; Dynamics of organic forms of nitrogen; Nitrogen economy; Biodegradation of organic matter; Biochemical transformation of organic matter; Bitumens in soil organic matter; Characterization of humic acids; Carbon dating; Modern techniques and their implact on soil organic matter research; Sludge; Soil organic matter components and plant metabolism; Interaction between agrochemicals and organic matter; Peat.