Download or read book III European Conference on Computational Mechanics written by C. A. Mota Soares and published by Springer Science & Business Media. This book was released on 2008-06-05 with total page 861 pages. Available in PDF, EPUB and Kindle. Book excerpt: III European Conference on Computational Mechanics: Solids, Structures and Coupled Problem in Engineering Computational Mechanics in Solid, Structures and Coupled Problems in Engineering is today a mature science with applications to major industrial projects. This book contains the edited version of the Abstracts of Plenary and Keynote Lectures and Papers, and a companion CD-ROM with the full-length papers, presented at the III European Conference on Computational Mechanics: Solids, Structures and Coupled Problems in Engineering (ECCM-2006), held in the National Laboratory of Civil Engineering, Lisbon, Portugal 5th - 8th June 2006. The book reflects the state-of-art of Computation Mechanics in Solids, Structures and Coupled Problems in Engineering and it includes contributions by the world most active researchers in this field.

Download or read book Proceedings of the Estonian Academy of Sciences Engineering written by and published by . This book was released on 2002-12 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Material Property Characterization using Small Punch Tests written by Bijan Kumar Dutta and published by CRC Press. This book was released on 2024-11-08 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: The small punch test (SPT) is useful to calculate changes in the tensile and fracture properties of structural materials during the service life of the materials of plant components. This book compiles advances in the development of correlations to calculate mechanical properties of the materials using SPT data. New correlations have been developed using hybrid methodology involving analytical and experimental data. The newly developed correlations have been tested conducting case studies on SPT and pre- cracked/ notched SPT (p- SPT) specimens. The eventual applications of all the new correlations have been demonstrated by conducting a real- life case study involving degradation of structural material from ductile to semi- brittle state due to aging. Features: • Presents exclusive material on the remnant life assessment of in- service materials using SPTs. • Assesses the fracture toughness of ductile materials using the experimentally measured biaxial fracture strain. • Provides new equations to calculate the yield and ultimate stresses of copper and titanium alloys using measured SPT data. • Explores functions to correlate the load- displacement data of p- SPT specimens with fracture properties. • Includes case studies with direct relevance to the degradation of plant materials. This book is aimed at researchers, professionals, and graduate students in materials science and engineering, mechanical property characterization and testing, and small- scale experimentation. It is expected that the advanced methodology presented in this book to evaluate changes in the properties of aged materials during the service life using SPT data are useful to designers for safety evaluation and also to calculate the remaining service life of industrial components for life extension studies.

Download or read book Anisotropy and Localization of Plastic Deformation written by J.P. Boehler and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 709 pages. Available in PDF, EPUB and Kindle. Book excerpt: Present developments in materials science, mechanics and engineering, as well as the demands of modern technology, result in a new and growing interest in plasticity and in bordering domains of the mechanical behavior of materials. This growing interest is attested to by the success of both The International Journal of Plasticity, which after its inception rapidly became the leading journal for plasticity research, and the series ofInternational Symposia on Plasticity and Its Current Applications, which is now the premier international forum for plasticity research dissemination. The First International Symposium on Plasticity and Its Current Applications was conceived and organized by Professor Akhtar S. Khan, and was held at the University of Oklahoma (Norman, Oklahoma, USA) from July 30 to August 3, 1984. It was attended by over one hundred scientists from fifteen countries. "Plasticity '89: the Second International Symposium on Plasticity and Its Current Applications" was held at Mie University (Tsu, Japan) from July 31 to August 4, 1989; this symposium was co-chaired by Professors Khan and Tokuda. The main emphasis of this meeting was on dynamic plasticity and micromechanics, although it included other aspects of plasticity as well. It was attended by over two hundred researchers from twenty-three nations.

Download or read book Fracture Research in Retrospect written by H.P. Rossmanith and published by CRC Press. This book was released on 1997-01-01 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the historical development of the engineering discipline of fracture mechanics from early times to the scientific treatment of the subject in the 20th century. Most papaers do not require a mathematical background to understand them.

Download or read book Fatigue and Fracture Mechanics written by Walter G. Reuter and published by ASTM International. This book was released on 2002-12-31 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering the whole of Asia and the Pacific region, this text provides both an analytic overview and specific data for each of the 60 countries. Introductory chapters cover regional issues, including: a regional review with the year's trends, developments and key events' analysis of the threat of terrorism in the region; the effects of deflation on the economy; the water crisis and its impact on the poor; and the successes and failures of micro-credit in the region.

Download or read book Frontiers in Materials Science written by B. Raj and published by Universities Press. This book was released on 2005 with total page 882 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents contributions by a galaxy of eminent scientists and technologists from the world over in broad spectrum of areas in materials science, providing a global perspective on complex issues of current concern and the direction of research in these areas.

Download or read book Metal Forming written by Chris V. Nielsen and published by Academic Press. This book was released on 2021-02-12 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Forming: Formability, Simulation, and Tool Design focuses on metal formability, finite element modeling, and tool design, providing readers with an integrated overview of the theory, experimentation and practice of metal forming. The book includes formability and finite element topics, including insights on plastic instability, necking, nucleation and coalescence of voids. Chapters discuss the finite element method, including its accuracy, reliability and validity and finite element flow formulation, helping readers understand finite element formulations, iterative solution methods, friction and contact between objects, and other factors. The book's final sections discuss tool design for cold, warm and hot forming processes. Examples of tools, design guidelines, and information related to tool materials, lubricants, finishes, and tool failure are included as well. - Provides fundamental, integrated knowledge on metal formability, finite element topics and tool design - Outlines user perspectives on accuracy, reliability and validity of finite element modeling - Discusses examples of tools, their design guidelines, tool lubricants, and tool failure - Considers the role played by stress triaxiality and shear and introduces uncoupled ductile damage criteria - Includes applications, worked examples and detailed techniques

Download or read book Elasto Plastic and Damage Analysis of Plates and Shells written by George Z Voyiadjis and published by Springer Science & Business Media. This book was released on 2008-07-23 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shells and plates are critical structures in numerous engineering applications. Analysis and design of these structures is of continuing interest to the scienti c and engineering communities. Accurate and conservative assessments of the maximum load carried by a structure, as well as the equilibrium path in both the elastic and inelastic range, are of paramount importance to the engineer. The elastic behavior of shells has been closely investigated, mostly by means of the nite element method. Inelastic analysis however, especially accounting for damage effects, has received much less attention from researchers. In this book, we present a computational model for nite element, elasto-plastic, and damage analysis of thin and thick shells. Formulation of the model proceeds in several stages. First, we develop a theory for thick spherical shells, providing a set of shell constitutive equations. These equations incorporate the effects of transverse shear deformation, initial curvature, and radial stresses. The proposed shell equations are conveniently used in nite element analysis. 0 AsimpleC quadrilateral, doubly curved shell element is developed. By means of a quasi-conforming technique, shear and membrane locking are prevented. The element stiffness matrix is given explicitly, making the formulation computationally ef cient. We represent the elasto-plastic behavior of thick shells and plates by means of the non-layered model, using an Updated Lagrangian method to describe a small-strain geometric non-linearity. For the treatment of material non-linearities, we adopt an Iliushin’s yield function expressed in terms of stress resultants, with isotropic and kinematic hardening rules.

Download or read book Dynamic Behavior of Materials Volume 1 written by Vijay Chalivendra and published by Springer Science & Business Media. This book was released on 2012-09-26 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Behavior of Materials, Volume 1: Proceedings of the 2012 Annual Conference on Experimental and Applied Mechanics represents one of seven volumes of technical papers presented at the Society for Experimental Mechanics SEM 12th International Congress & Exposition on Experimental and Applied Mechanics, held at Costa Mesa, California, June 11-14, 2012. The full set of proceedings also includes volumes on Challenges in Mechanics of Time -Dependent Materials and Processes in Conventional and Multifunctional Materials, Imaging Methods for Novel Materials and Challenging Applications, Experimental and Applied Mechanics, 2nd International Symposium on the Mechanics of Biological Systems and Materials 13th International Symposium on MEMS and Nanotechnology and, Composite Materials and the 1st International Symposium on Joining Technologies for Composites.

Download or read book Plasticity written by P.M. Dixit and published by CRC Press. This book was released on 2014-10-23 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explores the Principles of Plasticity Most undergraduate programs lack an undergraduate plasticity theory course, and many graduate programs in design and manufacturing lack a course on plasticity—leaving a number of engineering students without adequate information on the subject. Emphasizing stresses generated in the material and its effect, Plasticity: Fundamentals and Applications effectively addresses this need. This book fills a void by introducing the basic fundamentals of solid mechanics of deformable bodies. It provides a thorough understanding of plasticity theory, introduces the concepts of plasticity, and discusses relevant applications. Studies the Effects of Forces and Motions on Solids The authors make a point of highlighting the importance of plastic deformation, and also discuss the concepts of elasticity (for a clear understanding of plasticity, the elasticity theory must also be understood). In addition, they present information on updated Lagrangian and Eulerian formulations for the modeling of metal forming and machining. Topics covered include: Stress Strain Constitutive relations Fracture Anisotropy Contact problems Plasticity: Fundamentals and Applications enables students to understand the basic fundamentals of plasticity theory, effectively use commercial finite-element (FE) software, and eventually develop their own code. It also provides suitable reference material for mechanical/civil/aerospace engineers, material processing engineers, applied mechanics researchers, mathematicians, and other industry professionals.

Download or read book Material Forming written by Anna Carla Araujo and published by Materials Research Forum LLC. This book was released on 2024-05-20 with total page 2957 pages. Available in PDF, EPUB and Kindle. Book excerpt: These ESAFORM 2024 conference proceedings cover a wide range of topics: Additive manufacturing; Composites forming processes; Extrusion and drawing; Forging and rolling; Formability of metallic materials; Friction and wear in metal forming; Incremental and sheet metal forming; Innovative joining by forming technologies; Optimization and inverse analysis in forming; Machining, Cutting and severe plastic deformation processes; Material behavior modelling; New and advanced numerical strategies for material forming; Non-conventional processes; Polymer processing and thermomechanical properties; Sustainability on material forming. Keywords: WAAM Technology, Fused deposition Modeling (FDM), Fiber Composite Printers, Ultrasonic Powder Atomization, Finite Element Modeling (FEM), Laser Powder Bed Fusion (L-PBF), Rapid Prototyping in Additive Manufacturing, Directed Energy Deposition (DED), GTAW Droplet Deposition, Deep Learning, Thermoplastic Pultrusion, Textile Reinforcements, Thermoforming Simulation, New Sustainable Materials, Non-Crimp Fabrics, CFRP Scraps, PEEK Composites, Thermoplastic Sheets, Flax/PP Composites.

Download or read book Ultra low Cycle Fatigue Failure of Metal Structures under Strong Earthquakes written by Liang-Jiu Jia and published by Springer. This book was released on 2018-11-02 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents experimental results and theoretical advances in the field of ultra-low-cycle fatigue failure of metal structures under strong earthquakes, where the dominant failure mechanism is ductile fracture. Studies on ultra-low-cycle fatigue failure of metal materials and structures have caught the interest of engineers and researchers from various disciplines, such as material, civil and mechanical engineering. Pursuing a holistic approach, the book establishes a fundamental framework for this topic, while also highlighting the importance of theoretical analysis and experimental results in the fracture evaluation of metal structures under seismic loading. Accordingly, it offers a valuable resource for undergraduate and graduate students interested in ultra-low-cycle fatigue, researchers investigating steel and aluminum structures, and structural engineers working on applications related to cyclic large plastic loading conditions.

Download or read book Fracture Mechanics written by Ted L. Anderson and published by CRC Press. This book was released on 1994-12-16 with total page 1148 pages. Available in PDF, EPUB and Kindle. Book excerpt: This bestselling text/reference provides a comprehensive treatment of the fundamentals of fracture mechanics. It presents theoretical background as well as practical applications, and it integrates materials science with solid mechanics. In the Second Edition, about 30% of the material has been updated and expanded; new technology is discussed, and feedback from users of the first edition has been incorporated.

Download or read book Fracture Mechanics written by Satya N. Atluri and published by ASTM International. This book was released on 1992 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers of the June 1990 meeting held in Atlanta, Ga. The first volume (47 papers) concentrates on experimental and theoretical aspects of fracture mechanics. Volume two (26 papers) covers numerical and computational approaches. Topics include: ductile fracture, high-temperature and time-dependent fr

Download or read book The Physical Metallurgy of Fracture written by D.M.R. Taplin and published by Elsevier. This book was released on 2013-10-22 with total page 721 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Research on the Strength and Fracture of Materials: Volume 2As—The Physical Metallurgy of Fracture contains the proceedings of the Fourth International Conference on Fracture, held at the University of Waterloo, Canada, in June 1977. The papers review the state of the art with respect to the physical metallurgy of fracture in a wide range of materials such as metals, alloys, and structural steels. This volume is comprised of 85 chapters and opens by discussing the effect of grain size on the fracture of steel, aluminum alloys, and other materials. The influence of Mn additions on the fracture behavior of an Al-Mg-Si alloy is also considered, along with crack propagation in austenitic sheets. The next sections focus on the effect of phase transformation on the tensile fracture of austenitic stainless steel; atomistic simulation of the ductile/brittle transition; the effect of microstructure on fracture of a high toughness titanium alloy; and the effect of metallurgy on stress corrosion cracking and hydrogen embrittlement of ultra high strength steels. The remaining chapters are devoted to creep in materials such as Cr-Mo-V steels and titanium alloys. This monograph will be a useful resource for metallurgists, materials scientists, and structural and mechanical engineers.

Download or read book Advances in Computational Plasticity written by Eugenio Oñate and published by Springer. This book was released on 2017-09-09 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together some 20 chapters on state-of-the-art research in the broad field of computational plasticity with applications in civil and mechanical engineering, metal forming processes, geomechanics, nonlinear structural analysis, composites, biomechanics and multi-scale analysis of materials, among others. The chapters are written by world leaders in the different fields of computational plasticity.