Download or read book Continuous Recovery of Bioproducts by Adsorption written by Johannis P. van der Wiel and published by . This book was released on 1989 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Adsorption for the Recovery and Purification of Fermentation Products written by Mahesh Vijay Chaubal and published by . This book was released on 1995 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Separations of Biofuels and Bioproducts Via Magnetic Mesoporous Carbons written by Kyle Staggs and published by . This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aims of this project are to demonstrate the design and implementation of separations modalities for 1) in situ product recovery and 2) upstream pretreatment of toxic feedstocks. Many value-added bioproducts such as alcohols (ethanol and butanol) developed for the transportation sector are known to be integral to a sustainable future. Likewise, bioproduced aromatic building blocks for sustainable manufacturing such as phenol will be equally important. The production of these compounds is often limited by product toxicity at 2- 20 g/L, whereas it may desirable to produce 20-200 g/L for economically feasible scale up. While low-cost feedstocks are desirable for economical production, they contain highly cytotoxic value-added byproducts such as furfural. It is therefore desirable to design facile detoxification methods for lignocellulose-derived feedstocks to isolate and recover furfural preceding ethanol fermentation by Escherichia coli. Correspondingly it is desirable to design efficient facile in situ recovery modalities for bioalcohols and phenolic bioproducts. Accordingly, in-situ removal modalities were designed for simultaneous acetone, butanol, and ethanol recovery. Additionally, a furfural removal modality from lignocellulosic hydrolysates was designed for upstream pretreatment. Solid-liquid adsorption was found to serve well each of the recovery modalities characterized here. More hydrophobic compounds such as butanol and furfural are readily recovered from aqueous solutions via adsorption. The primary operational drawback to adsorption is adsorbent recovery and subsequent desorption of the product. Novel magnetically separable mesoporous carbon powders (MMCPs) were characterized and found to be rapidly separable from solutions at 91% recovery by mass. Thermal desorption of value added products was found efficient for recovery of butanol and furfural. Fufural was desorbed from the MMCPs up to 57% by mass with repeated adsorption/thermal desorption cycles. Butanol was recovered from MMCPs up to an average 93% by mass via thermal desorption. As another valuable renewable fermentation product, phenol was also collected via in-situ adsorption onto Dowex Optipore L-493 resin. Phenol recovery from the resins was efficiently accomplished with tert-butyl methyl ether up to 77% after 3 washes.
Download or read book Precision Process Technology written by M.P.C. Weijnen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: New process technology strategies are required to cope with the future. Fossil feedstocks are losing ground in favour of renewable feedstocks and secondary resources. Conventional processing routes using thermal `sledgehammer' techniques are replaced by highly selective (bio)catalytic conversions. The future process engineer is neither allowed to think in terms of unit operations, nor to take for granted the conventional practice of continuous steady state processing. Hybrid systems and transient operations are more and more frequently encountered. The continuing impressive progress being made in process modelling and control will revolutionize the process industries. In the new generation of chemical production processes the keyword is precision. Precision in terms of selectivity and of efficiency, is required to maximize the utilisation of materials and energy. Moreover, enhanced precision is needed to exploit the quality of materials and energy to the full extent. Only by reducing the squandering of materials, energy and quality will a harmonious relationship be established between the process industries, the economy, and the environment. Process integration, as well as an integrated effort by the disciplines involved in process technology, will be of crucial importance in attaining the goals of precision process technology. These emerging strategies involve an active exchange of tools and ideas between a variety of disciplines, not only in plant design and operation, but even more in the early stages of process development and design. By looking from various angles at what the future has in store for the process industries, this volume systematically lifts the corners of the veil and may inspire to establish a new tradition of precision in process technology.
Download or read book Advanced Biofuels and Bioproducts written by James W. Lee and published by Springer Science & Business Media. This book was released on 2012-08-30 with total page 1110 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed as a text not only for students and researchers, but anyone interested in green technology, Advanced Biofuels and Bioproducts offers the reader a vast overview of the state-of-the-art in renewable energies. The typical chapter sets out to explain the fundamentals of a new technology as well as providing its context in the greater field. With contributions from nearly 100 leading researchers across the globe, the text serves as an important and timely look into this rapidly expanding field. The 40 chapters that comprise Advanced Biofuels and Bioproducts are handily organized into the following 8 sections: · Introduction and Brazil's biofuel success · Smokeless biomass pyrolysis for advanced biofuels production and global biochar carbon sequestration · Cellulosic Biofuels · Photobiological production of advanced biofuels with synthetic biology · Lipids-based biodiesels · Life-cycle energy and economics analysis · High-value algal products and biomethane · Electrofuels
Download or read book Food Waste Recovery written by Charis M. Galanakis and published by Academic Press. This book was released on 2020-12-21 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Food Waste Recovery: Processing Technologies, Industrial Techniques, and Applications, Second Edition provides information on safe and economical strategies for the recapture of value compounds from food wastes while also exploring their re-utilization in fortifying foods and as ingredients in commercial products. Sections discuss the exploration of management options, different sources, the Universal Recovery Strategy, conventional and emerging technologies, and commercialization issues that target applications of recovered compounds in the food and cosmetics industries. This book is a valuable resource for food scientists, technologists, engineers, chemists, product developers, researchers, academics and professionals working in the food industry. Covers food waste management within the food industry by developing recovery strategies Provides coverage of processing technologies and industrial techniques for the recovery of valuable compounds from food processing by-products Explores the different applications of compounds recovered from food processing using three approaches: targeting by-products, targeting ingredients, and targeting bioactive applications
Download or read book Aqueous Two Phase Systems for Bioprocess Development for the Recovery of Biological Products written by Marco Rito-Palomares and published by Springer. This book was released on 2017-07-18 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive and unique text presents a full overview of downstream processing useful for those new to the concept as well as professionals with experience in the area. The history and theoretical principles of Aqueous Two-Phase Systems (ATPS) are covered in depth. Information on ATPS characterization and application is included, and ATPS equilibria and system parameters that have significant effect on partition behavior are studied. Aqueous Two-Phase Systems for Bioprocess Development for the Recovery of Biological Products addresses specific applications of ATPS for the recovery and partial purification of high molecular weight compounds such as proteins, nucleic acids and polysaccharides, particulate bioproducts such as cells and organelles and low molecular weight compounds. Non-conventional strategies involving ATPS such as affinity systems, continuous liquid-liquid fractionation stages and the recovery from plant extracts are presented. Economic analysis of the application of ATPS in comparison to other fractionation techniques, particularly liquid chromatography, is considered, as are opportunity and current trends in the ATPS research area. Each chapter utilizes the contributors' experimental expertise in traditional and non-conventional ATPS strategies, as well as analysis of areas of opportunity and perspectives on the development and future applications of ATPS in both the lab and larger scale operations. The result is a thorough and singular overview of ATPS which has not been matched by any other text on the market.
Download or read book Continuous Processing in Pharmaceutical Manufacturing written by Ganapathy Subramanian and published by John Wiley & Sons. This book was released on 2015-02-09 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions from biotechnologists and bioengineers, this ready reference describes the state of the art in industrial biopharmaceutical production, with a strong focus on continuous processes. Recent advances in single-use technology as well as application guidelines for all types of biopharmaceutical products, from vaccines to antibodies, and from bacterial to insect to mammalian cells are covered. The efficiency, robustness, and quality control of continuous production processes for biopharmaceuticals are reviewed and compared to traditional batch processes for a range of different production systems.
Download or read book Bioethanol A Green Energy Substitute for Fossil Fuels written by Eriola Betiku and published by Springer Nature. This book was released on 2023-08-28 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book looks deeply into the prospects for using ethanol as a greener alternative to fossil fuels and the technical and scientific issues that surround them. Ethanol, with its numerous advantages, has emerged as a promising contender to replace gasoline as a fuel source. Currently, it is commercially available as a blend with gasoline, commonly known as E10 and E25, utilizing various ratios of ethanol. Despite its clear benefits over gasoline, the widespread adoption of ethanol as a fuel remains hindered by its limited availability. In this insightful book, we aim to explore the multifaceted challenges surrounding ethanol's full integration into our energy landscape, employing a comprehensive approach through review manuscripts. Leading worldwide experts, known for their deep understanding of ethanol as a fuel, have contributed to the book. Their valuable insights and contributions enrich the book's content, offering readers a comprehensive exploration of the subject matter. This book is a compelling resource for researchers, energy professionals, and anyone interested in understanding the challenges and opportunities associated with the integration of ethanol as a substitute for gasoline.
Download or read book Process Intensification in the Manufacturing of Biotherapeutics written by Davide Moscatelli and published by Elsevier. This book was released on 2022-07-05 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Intensification in the Manufacturing of Biotherapeutics, Volume 59 in the Advances in Chemical Engineering series, highlights new advances in the field with this new volume presenting interesting chapters on topics such as Evolution and design of continuous bioreactors for the production of biologics, Continuous countercurrent chromatography for the downstream processing of bioproducts: A focus on flow-through technologies Application of multicolumn countercurrent solvent gradient purification to the polishing of therapeutic proteins, Continuous precipitation technologies for the recovery of bioproducts, Continuous Recovery and Purification of Bioproducts on the Basis of Adsorption Technology, General Platform for Development of Integrated Continuous Downstream Processes, and more Provides the authority and expertise of leading contributors from an international board of authors Presents the latest release in the Advances in Chemical Engineering serials“/li> Updated release includes the latest information on Process Intensification in the Manufacturing of Biotherapeutics
Download or read book Separations for Biotechnology written by and published by . This book was released on 1990 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Adsorption Science and Technology written by A.E. Rodrigues and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the NATO Advanced Study Institute, Vimeiro, Portugal, July 17-29, 1988
Download or read book Green Innovation Sustainable Development and Circular Economy written by Nitin Kumar Singh and published by CRC Press. This book was released on 2020-10-14 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although green innovation and technology is not new, so far very limited information is available regarding the diversified approaches for green technologies and engineering. This book highlights the challenges and opportunities, offering a roadmap for using various approaches in the most cost effective way. The book discusses the interrelationship between a circular economy and green technologies. It presents the dimensions of green innovations and illustrates the challenges of industrialization, especially in terms of material synthesis and utilized processes. It covers the current environmental and health challenges of societies and describes the role of stakeholders in developing sustainable societies and industries. This book provides a line of approach to core and interdisciplinary students, academicians, research scientists, and various industry personnel to present their ideas of green innovations with a common vision of sustainable development of community and industries in mind. Features Discusses the interrelationship between a circular economy and green technologies Presents the dimensions of green innovations Illustrates the challenges of industrialization, especially in terms of material synthesis and utilized processes Covers the current environmental and health challenges of societies Offers the identification and role of stakeholders in the sustainable development of societies and industries
Download or read book Bioproducts and Bioprocesses written by Armin Fiechter and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Japanese biotechnology community has developed a unique system of scientific bilateral communications at the international level. It consists of closed seminars where a restricted number of speakers from Japan and a selected country are invited. Thereby the actual state of biotechnology is visualized very effectively and valuable information exchanged during the discussions and personal contacts. As a result strong relationships between several European and American countries have been built up during recent years and numerous colleagues from abroad have improved their knowledge of Japanese science, economy, and culture. The present volume reports on an American-Japanese meeting held in Moriyama, which is situated on the lovely Lake Biwa in Japan. The well prepared and efficiently organized event covered the major aspects of bioprocess engineering including animal and plant cell culture, biocatalysts, downstream processing, sensor and bioprocess control, as well as genetic engineering. Altogether a broad spectrum, indicating the strengths and weaknesses of the current efforts being made for the improvement of process technology and the search for new products.
Download or read book Silver Recovery From Assorted Spent Sources Toxicology Of Silver Ions written by Syed Sabir and published by World Scientific. This book was released on 2018-02-28 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silver holds three world records; it has the lowest contact resistance, highest electrical conductivity and the best thermal conductivity of all metals. The element's physical strength, brilliance and malleability leads to its many uses from electronics to optical applications.A new 'silver rush' has occurred following the recent discovery that silver, when divided to form particles at the nano scale, can take on new properties. Meanwhile, there has been an increase in regulations against environmental pollution of silver ions toxicity, which have caused numerous diseases and disorders in the marine, microbial, invertebrate and vertebrate community (including humans). Both of which have led to a great interest in silver recovery for both environmental toxicity and an economic point of view.Comprised of ten chapters, this book draws attention to the most advance technologies in silver recovery and recycling from various spent sources, which will appeal to research scientists and metallurgists. The state of the art in recovery of silver from different sources by hydrometallurgical and bio-metallurgical processing and varieties of leaching, cementing, reducing agents, adsorbents, and bio-sorbents are highlighted in this book.
Download or read book Biomass as Renewable Raw Material to Obtain Bioproducts of High Tech Value written by Valentin I. Popa and published by Elsevier. This book was released on 2018-02-15 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomass as Renewable Raw Material to Obtain Bioproducts of High-tech Value examines the use of biomass as a raw material, including terrestrial and aquatic sources to obtain extracts (e.g. polyphenols), biofuels, and/or intermediates (furfural, levulinates) through chemical and biochemical processes. The book also covers the production of natural polymers using biomass and the biosynthetic process, cellulose modified by biochemical and chemical methods, and other biochemicals that can be used in the synthesis of various pharmaceuticals. Featuring case studies, discussions of sustainability, and nanomedical, biomedical, and pharmaceutical applications, Biomass as Renewable Raw Material to Obtain Bioproducts of High-tech Value is a crucial resource for biotechnologists, biochemical engineers, biochemists, microbiologists, and research students in these areas, as well as entrepreneurs, policy makers, stakeholders, and politicians. - Reviews biomass resources and compounds with bioactive properties - Describes chemical and biochemical processes for creating biofuels from biomass - Outlines production of polysaccharides and cellulose derivatives - Features applications in the fields of medicine and pharmacy
Download or read book Sustainable Catalytic Conversion of Biomass for the Production of Biofuels and Bioproducts written by Gabriel Morales and published by MDPI. This book was released on 2020-12-02 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomass is widely considered as a potential alternative to dwindling fossil fuel reserves. There is a large variety of biomass sources (oleaginous, lignocellulosic, algae, etc.), with many possible conversion routes and products. Currently, biomass is not just viewed as a source of biofuels, but also as an interesting feedstock for the production of bio-based chemicals that could largely replace petrochemicals. In this context, the search for new sustainable and efficient alternatives to fossil sources is gaining increasing relevance within the chemical industry. There, the role of catalysis is often critical for the development of clean and sustainable processes, aiming to produce commodity chemicals or liquid fuels with a high efficiency and atom economy. This book gathers works at the cutting edge of investigation in the application of catalysis, for the sustainable conversion of biomass into biofuels and bio-based chemicals.
