Download or read book Continuous Operation of an Air Suspension Coating Unit written by David M. Shannon and published by . This book was released on 1973 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2013-12-11 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and dis seminated by the Center for Information and Numerical Data Analysis and Synthesis, (CINDAS) *at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the ac tivity was transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volume were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 19 (thesis year 1974) a total of 10,045 theses titles from 20 Canadian and 209 United States universities. We are sure that this broader base for theses titles reported will greatly enhance the value of this important annual reference work. The organization of Volume 19 is identical to that of past years. It consists of theses titles arranged by discipline and by university within each discipline.

Download or read book Handbook of Pharmaceutical Granulation Technology written by Dilip M. Parikh and published by CRC Press. This book was released on 1997-06-17 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrating the basic principles and industrial practices of pharmaceutical granulation production, this book discusses technologies and demonstrates cost-effective approaches to manufacturing solid-dosage forms with content uniformity and consistent physical properties while complying with regulatory requirements. Specialists from pharmaceutical companies, academia, and the U.S. Drug Regulatory Affairs agency address current and changing practices in industrial drug granulation production. Text, charts, figures, and photographs illustrate the pros and cons of diverse methods and technologies for accurately achieving strong bonding of particles in tablets and capsules.

Download or read book FDA Handbook of Total Drug Quality written by United States. Food and Drug Administration and published by . This book was released on 1971 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Phase Change Materials and Their Applications written by Mohsen Mhadhbi and published by BoD – Books on Demand. This book was released on 2018-08-01 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, the application of phase change materials (PCMs) has developed in different industries, including the solar cooling and solar power plants, photovoltaic electricity systems, the space industry, waste heat recovery systems, preservation of food and pharmaceutical products, and domestic hot water. PCMs use the principle of latent heat thermal storage to absorb energy in large quantities when there is a surplus and release it when there is a deficit. This promising technology has already been successfully implemented in many construction projects. The aim of this book is to assist the scientists and to provide the reader with a comprehensive overview of the properties that characterize the phase change materials from theoretical and experimental perspectives with a focus on their technological applications. The present status and future perspectives of phase change material are discussed.

Download or read book Encapsulation Nanotechnologies written by Vikas Mittal and published by John Wiley & Sons. This book was released on 2013-05-28 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique and comprehensive book covers all the recent physical, chemical, and mechanical advancements in encapsulation nanotechnologies. Encapsulation is prevalent in the evolutionary processes of nature, where nature protects the materials from the environment by engulfing them in a suitable shell. These natural processes are well known and have been adopted and applied in the pharmaceutical, food, agricultural, and cosmetics industries. In recent years, because of the increased understanding of the material properties and behaviors at nanoscale, research in the encapsulation field has also moved to the generation of nanocapsules, nanocontainers, and other nano devices. One such example is the generation of self-healing nanocontainers holding corrosion inhibitors that can be used in anti-corrosion coatings. The processes used to generate such capsules have also undergone significant developments. Various technologies based on chemical, physical, and physico-chemical synthesis methods have been developed and applied successfully to generate encapsulated materials. Because of the increasing potential and value of the new nanotechnologies and products being used in a large number of commercial processes, the need for compiling one comprehensive volume comprising the recent technological advancements is also correspondingly timely and significant. This volume not only introduces the subject of encapsulation and nanotechnologies to scientists new to the field, but also serves as a reference for experts already working in this area. Encapsulation Nanotechnologies details in part: The copper encapsulation of carbon nanotubes Various aspects of the application of fluid-bed technology for the coating and encapsulation processes The use of the electrospinning technique for encapsulation The concept of microencapsulation by interfacial polymerization Overviews of encapsulation technologies for organic thin-film transistors (OTFTs), polymer capsule technology, the use of supercritical fluids (such as carbon dioxide), iCVD process for large-scale applications in hybrid gas barriers Readership Encapsulation Nanotechnologiesis of prime interest to a wide range of materials scientists and engineers, both in industry and academia.

Download or read book The Theory and Practice of Industrial Pharmacy written by Leon Lachman and published by . This book was released on 1976 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Granulation written by Agba D. Salman and published by Elsevier. This book was released on 2006-11-24 with total page 1403 pages. Available in PDF, EPUB and Kindle. Book excerpt: Granulation provides a complete and comprehensive introduction on the state-of-the-art of granulation and how it can be applied both in an academic context and from an industrial perspective. Coupling science and engineering practices it covers differing length scales from the sub-granule level through behaviour through single granules, to bulk granule behaviour and equipment design. With special focus on a wide range of industrially relevant areas from fertilizer production, through to pharmaceuticals. Experimental data is complemented by mathematical modelling in this emerging field, allowing for a greater understanding of the basis of particle products and this important industry sector.Four themes run through the book: 1. The Macro Scale processing for Granulation – including up to date descriptions of the methods used for granulation and how they come about and how to monitor – on-line these changes.2. The Applications of granulation from an industrial perspective, with current descriptive roles and how they are undertaken with relevance to industry, and effective properties.3. Mechanistic descriptions of granulation and the different rate processes occurring within the granulator. This includes methods of modelling the process using Population – Balance Equations, and Multi-level Computational Fluid Dynamics Models.4. The Micro Scale: Granules and Smaller, looking at single granules and there interactions and modelling, while also considering the structure of granules and their constituent liquid bridges.* Covers a wide range of subjects and industrial applications* Provides an understanding of current issues for industrial and academic environments* Allows the reader an understanding of the science behind engineered granulation processes

Download or read book Chemical Engineering in the Pharmaceutical Industry written by Mary T. am Ende and published by John Wiley & Sons. This book was released on 2019-04-01 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to the important chemical engineering concepts for the development of new drugs, revised second edition The revised and updated second edition of Chemical Engineering in the Pharmaceutical Industry offers a guide to the experimental and computational methods related to drug product design and development. The second edition has been greatly expanded and covers a range of topics related to formulation design and process development of drug products. The authors review basic analytics for quantitation of drug product quality attributes, such as potency, purity, content uniformity, and dissolution, that are addressed with consideration of the applied statistics, process analytical technology, and process control. The 2nd Edition is divided into two separate books: 1) Active Pharmaceutical Ingredients (API’s) and 2) Drug Product Design, Development and Modeling. The contributors explore technology transfer and scale-up of batch processes that are exemplified experimentally and computationally. Written for engineers working in the field, the book examines in-silico process modeling tools that streamline experimental screening approaches. In addition, the authors discuss the emerging field of continuous drug product manufacturing. This revised second edition: Contains 21 new or revised chapters, including chapters on quality by design, computational approaches for drug product modeling, process design with PAT and process control, engineering challenges and solutions Covers chemistry and engineering activities related to dosage form design, and process development, and scale-up Offers analytical methods and applied statistics that highlight drug product quality attributes as design features Presents updated and new example calculations and associated solutions Includes contributions from leading experts in the field Written for pharmaceutical engineers, chemical engineers, undergraduate and graduation students, and professionals in the field of pharmaceutical sciences and manufacturing, Chemical Engineering in the Pharmaceutical Industry, Second Edition contains information designed to be of use from the engineer's perspective and spans information from solid to semi-solid to lyophilized drug products.

Download or read book Aqueous Polymeric Coatings for Pharmaceutical Dosage Forms written by Linda A. Felton and published by CRC Press. This book was released on 2016-09-19 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aqueous-based film coating has become routine in the pharmaceutical industry. This process eliminates the use of organic solvents and thus avoids economic, environmental, and toxicological issues related to residual solvents and solvent recovery. Aqueous-based coating, however, is complex and many variables may impact the final product and its performance. This fourth edition of Aqueous Polymeric Coatings for Pharmaceutical Dosage Forms aims to provide insight into the factors and parameters that should be considered and controlled for the successful development and commercialization of a coated product. The fourth edition has been revised and expanded to reflect the most recent scientific advancements from the literature. The contributing authors explain in detail, using illustrated examples, appropriate steps to solve and ideally avoid formulation, processing, and stability problems and to achieve an optimized dosage form. Trade names and chemical names of commercially marketed coatings are used throughout the text to help familiarize the reader with the various materials available for pharmaceutical applications. This book will be a valuable resource for anyone in the pharmaceutical industry working in the area of aqueous-based film coating.

Download or read book Pharmaceutical Process Scale Up written by Michael Levin and published by CRC Press. This book was released on 2001-12-12 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on scientific and practical aspects of process scale-up, this resource details the theory and practice of transferring pharmaceutical processes from laboratory scale to the pilot plant and production scale. It covers parenteral and nonparenterel liquids and semi-solids, products derived from biotechnology, dry blending and powder handling,

Download or read book Industrial Transmission and Conveying written by and published by . This book was released on 1926 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Complete Technology Book on Electroplating Phosphating Powder Coating And Metal Finishing written by NIIR Board and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2005-10-04 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electroplating and Metal Finishing concerns itself with the development and applications of composites and non metallic coatings. These coatings are used for decorative, protective and functional application. Some of the other common metal surface finishing technologies are phosphating, pickling, electroforming, powder coating etc. Electroplating is the process of applying a metallic coating to an article by passing an electric current through an electrolyte in contact with the article, thereby forming a surface having properties or dimensions different from those of the article. Metal finishing has now come to be known as surface engineering. Surface engineering techniques are generally used to develop a wide range of functional properties. In addition to the decorative aspects, metal finishing aids the protection of metals and alloys from corrosion and rusting. A great potential exists for development of new materials involving, for example, coatings of metals composites particle incorporated anodic coatings and even films of sapphire like materials, porous files of niobium etc. and coating of refractory metals like molybdenum and tungsten. Phosphate coatings have a wide field of application in manufacturing industry, both as an aid to mechanical production operations and in surface finishing. The major applications for phosphate treatments fall into four areas; pre treatment prior to organic coatings, protection against corrosion, anti wear coatings and phosphating as a production aid. Powder coating of aluminium, extrusions in particular, has become an important feature in the finishing of aluminium. There are several advantages of powder; powder coating overspray can be recycled and thus it is possible to achieve nearly 100% use of the coating, powder coating production lines produce less hazardous waste than conventional liquid coatings, capital equipment and operating costs for a powder line are generally less than for conventional liquid lines. Surface finishing is a broad range of industrial processes that alter the surface of a manufactured item to achieve a certain property. Currently, the trend is towards surface treatments. Industries in developing countries like India have to be increasingly aware of the need not only for up gradation of existing technologies but also for indigenization of new technologies on a time bound basis. The content of the book includes information about technology involved in surface engineering of metals; some of them are electroplating plant, barrel planting plant, electroplating equipment, cleaning, pickling and dipping, equipment for hot alkaline cleaners, electrolytic and chemical processes for the polishing of metals, canning stainless steel electro-polishing solution, electroforming in gramophone record production, silver plating, fluoborate plating, gold plating (gilding), cadmium plating, zinc plating, chemical finishing of aluminium, powder coating of aluminium, bright nickel electro plating, copper plating, etc. This book covers an intensive study of technology of electroplating, phosphating, powder coating and metal finishing. The first hand information on these technologies is dealt in the book and can be very useful for those looking for entrepreneurship opportunity in the said industry. TAGS Electroplating Plant, Automatic Equipment, Surface Coatings and Treatments, Electroplating and Coating Plants, Electroplating Plant Equipment, Powder Coating Plants, Powder Coating Equipments, How to Start Powder Coating Business, Powder Coating Business Plan, Business Plan on Powder Coating, Start Powder Coating Business, Start High Profit Powder Coating Business, Starting Metal Polishing Business, Electroplating Business, Gold Plating Business, How to Start Metal Plating Business, Starting Zinc Plating Business, How to Start Electroplating Business, How to Start Metal Finishing Business, Starting Metal Polishing Business, Metal Finishing Industry, Business Plans for Metal Finishing, Zinc Plating Process, Zinc Plating Plant, Electroplating Plant for Acid Zinc, Electroplating Plant Equipment, Fixed Sequence Automatic Plating Plant, Trojan and Gem Type Automatic Plant, Vulcan Lattice Arm Type Automatic Plant, Titan Type Automatic Plant, Digit Pivoted Arm Type Automatic Plant, Straight-Through Type Automatic Plant, Methods of Transporter Control, Microprocessor and Computer Control, Semi-Automatic Plating Plant, Barrel Planting Plant, Suitability of Articles for Barrel Plating, Glydo/Glydette Barrel Plating Equipment, Calculation of Work Loads, Manual Planting Plant, Single Station Barrel Plating Units, Modular Plant and Specialised Equipment for Electronics Industry, Electroplating Equipment, Welded Steel Tanks, Plastic Tanks Reinforced with Glass Fibre, Tank Lining Materials, Glass Fibre (GRP) Tanks, Treatment of Rubber Linings, Ilex Grade Plastic Lined Tanks, Galvanised Steel Coils, Lead and Lead Alloy Coils, Titanium Coils, Metal Cased Heaters, Teflon Immersion Heaters, Silica Cased Heaters, Earthing of Electrically Heated Tanks, Electric Heating of Plastic or Plastic Lined Tanks, Lagging and Heat Conservation, Thermostatic Control Equipment, Jigs & Racks For Electroplating, Anodising and Other Surface Coatings, Removal of Insulated Coatings, Rectifier Installation and Maintenance, Single Phase Rectifier Units, Constant Voltage and Constant Current Control Controllers for Anodic Oxidation Processes, Current Interrupters and Periodic Reverse Units, Pre-Setting Ampere-Time Meters and Panels, Connecting Up Plating Equipment, Cleaning, Pickling and Dipping, Equipment for Hot Alkaline Cleaners, Cleaning of Zinc Base Alloy Die Castings, Cleaning of Zinc Base Alloy Die Casting, Anozyn, Equipment, Solution Composition, Solution Preparation, Operating Conditions, Plating on High Carbon Steel, Plating on Cast Iron and Malleable Castings, Plating on Stainless Steel, Nickel Chloride Strike for Stainless Steel, Nickel Sulphate Strike for Stainless Steel, Copper and Nickel Plating on Zinc Base Alloy Die-Castings, Standard Process Sequence for Electro-Plating on Aluminium and its Alloys, Electrolytic and Chemical Processes for Polishing of Metals, Aluminium Electro-Polishing Solution, Canning Non-Ferrous Electro-Polishing Solution, Copper Plating, Cyanide Copper Plating Processes, Zonax Copper Solution, Acid Copper Plating Processes, Gold Plating, Copper Fluoborate Bath, Standard Acid Copper Plating, Copper Pyrophosphate Plating Baths, Functional Chromium Plating, Decorative Black Chromium, Decorative Chromium Plating, Production Plating Conditions, Preparation of Plating Bath, Electroplating Solutions, Cadmium Electro-Plating, Adhesion and Surface Preparation, Bright Nickel Electro-Plating, Powder Coating of Aluminium, Chemical Colouring of Aluminium, Electroplating on Aluminium, Chemical Finishing of Aluminium, Aluminium Pre-Treatment, Calcium Modified Zinc Phosphate Processes, Heavy Zinc Phosphate Processes, Equipment for Phosphating, Immersion Phosphating Plant, Spray Phosphating Equipment, Treatment of High Tensile Steels, Phosphating Processes, Pre-Treatment Prior to Organic Coatings, Plating for Electronics, Plating of Plastics and Other Non-Metallic Materials, Production of Blue Chromate Coating, Passivation Processes for Zinc and Cadmium Electrodeposits, Treatment of Work After Plating, Cadmium Plating, Gold Plating (Gilding), Tin-Nickel Alloy Plating, Silver Plating, Brass Plating, Electroforming

Download or read book Code of Federal Regulations written by and published by . This book was released on 1994 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special edition of the Federal Register, containing a codification of documents of general applicability and future effect ... with ancillaries.

Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1967-03 with total page 896 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Industrial Aspects of Pharmecuticals written by SANDELL and published by CRC Press. This book was released on 1992-06-01 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Chemical Engineering Progress written by and published by . This book was released on 1966 with total page 1152 pages. Available in PDF, EPUB and Kindle. Book excerpt: