Download or read book Solidification of Containerless Undercooled Melts written by Dieter M. Herlach and published by John Wiley & Sons. This book was released on 2012-05-21 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: All metallic materials are prepared from the liquid state as their parent phase. Solidification is therefore one of the most important phase transformation in daily human life. Solidification is the transition from liquid to solid state of matter. The conditions under which material is transformed determines the physical and chemical properties of the as-solidified body. The processes involved, like nucleation and crystal growth, are governed by heat and mass transport. Convection and undercooling provide additional processing parameters to tune the solidification process and to control solid material performance from the very beginning of the production chain. To develop a predictive capability for efficient materials production the processes involved in solidification have to be understood in detail. This book provides a comprehensive overview of the solidification of metallic melts processed and undercooled in a containerless manner by drop tube, electromagnetic and electrostatic levitation, and experiments in reduced gravity. The experiments are accompanied by model calculations on the influence of thermodynamic and hydrodynamic conditions that control selection of nucleation mechanisms and modify crystal growth development throughout the solidification process.

Download or read book Containerless Processing of Undercooled Melts written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-30 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: The investigation focused on the control of microstructural evolution in Mn-Al, Fe-Ni, Ni-V, and Au-Pb-Sb alloys through the high undercooling levels provided by containerless processing, and provided fundamental new information on the control of nucleation. Solidification analysis was conducted by means of thermal analysis, x-ray diffraction, and metallographic characterization on samples processed in a laboratory scale drop tube system. The Mn-Al alloy system offers a useful model system with the capability of phase separation on an individual particle basis, thus permitting a more complete understanding of the operative kinetics and the key containerless processing variables. This system provided the opportunity of analyzing the nucleation rate as a function of processing conditions and allowed for the quantitative assessment of the relevant processing parameters. These factors are essential in the development of a containerless processing model which has a predictive capability. Similarly, Ni-V is a model system that was used to study duplex partitionless solidification, which is a structure possible only in high under cooling solidification processes. Nucleation kinetics for the competing bcc and fcc phases were studied to determine how this structure can develop and the conditions under which it may occur. The Fe-Ni alloy system was studied to identify microstructural transitions with controlled variations in sample size and composition during containerless solidification. This work was forwarded to develop a microstructure map which delineates regimes of structural evolution and provides a unified analysis of experimental observations. The Au-Pb-Sb system was investigated to characterize the thermodynamic properties of the undercooled liquid phase and to characterize the glass transition under a variety of processing conditions. By analyzing key containerless processing parameters in a ground based drop tube study, a carefully designed flight experiment may b...

Download or read book Metastable Solids from Undercooled Melts written by Dieter Herlach and published by Elsevier. This book was released on 2006-12-18 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the physical concepts and tools to characterize and describe the formation of metastable solids from undercooled melts. Its aim is to facilitate understanding of the development of the science and technology of solidification of melts and to introduce new concepts within this exciting research field in order to fulfil the challenges of the future in the field of undercooled melts. A comprehensive description of the science and applications of the undercooling phenomenon is given. It is composed of several main parts: experimental techniques for undercooling; characterization of the undercooled melt as the first step in rapid solidification; introducing the concepts of modern theories of rapid dendrite and eutectic growth and their comparison with experimental results, and a survey of metastable materials formed from the non-equilibrium state of an undercooled melt. * Showing clear links to possible application of results obtained from basic research * The subject matter is multidisciplinary and will be of interest to material scientists, physicists, physical chemists, mechanical and electrical engineers

Download or read book Metallurgy in Space written by Hans-Jörg Fecht and published by Springer Nature. This book was released on 2022-03-31 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents experimental work conducted on the International Space Station (ISS) in order to characterize metals and alloys in the liquid state. The internationally recognized authors present and discuss experiments performed in microgravity that enabled the study of the relevant volume and surface related properties free of the restrictions of a gravity-based environment. The collection serves also as a handbook of space experiments using electromagnetic levitation techniques. A summary of recent results provides an overview of the wealth of space experiment data, which will ignite further research activities and inspire academics and industrial research departments for their continuous development.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book NASA Technical Memorandum written by United States. National Aeronautics and Space Administration and published by . This book was released on 1992 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Microgravity Science and Applications Program Tasks 1984 Revision written by and published by . This book was released on 1985 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Microgravity Science and Applications Program Tasks written by United States. Office of Space Science and Applications and published by . This book was released on 1988 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Microgravity Science and Applications Program Tasks 1990 Revision written by and published by . This book was released on 1991 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Microgravity Science and Applications Program Tasks written by and published by . This book was released on 1991 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Materials Processing in Space Program Tasks supplement written by and published by . This book was released on 1983 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Rapidly Solidified Alloys written by Liebermann and published by CRC Press. This book was released on 1993-05-20 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume details the principles underlying rapid solidification processing, material structure and properties, and their applications. This practical resource presents a manifold approach to both amorphous and crystalline rapidly solidified metallic alloys.;Written by over 30 internationally acclaimed specialists in their respective fields, Rapidly Solidified Alloys: surveys nucleation and growth studies in undercooled melts; examines various processes for the production of rapidly solidified alloys; discusses the compaction of amorphous alloys; describes surface remelting treatments for the rapid solidification of surface layers and the resultant improved workpiece properties; covers the closely related topics of structural relaxation, atomic transport and other thermally induced processes; demonstrates microstructure-property relationships in rapidly quenched crystalline alloy systems and their beneficial effects in applications; and elucidates the basic, engineeering, and applications-oriented magnetic properties of amorphous alloys.;Furnishing more than 2300 literature citations for further study of specific subjects, Rapidly Solidified Alloys is intended for materials, mechanical, product, and civil engineers; metallurgists; magneticians; physicists; physical chemists; and graduate students in these disciplines.

Download or read book Advanced Materials 93 written by T Matsumoto and published by Newnes. This book was released on 2012-12-02 with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computations, Glassy Materials, Microgravity and Non-Destructive Testing is a compilation of the papers presented during the Third IUMRS International Conference on Advanced Materials International Union of The Materials Research Societies that discussed the concepts and methods behind glassy materials. The book is divided into parts. Part 1 tackles the progresses in sol-gel science and technology; the reaction mechanisms of ormosils and effects of ultrasonic irradiation; and the preparation of different glasses and their properties. Part 2 covers topics such as the neural network system for the identification of materials; the use of computers for simulations of many-body systems; computer system for meeting the supercomputing needs of materials; quality control of materials information by knowledge base; and the development of knowledgebase system for computer-assisted alloy design. Part 3 deals with the properties of different materials, the concepts, and the techniques behind them, and Part 4 discusses the non-destructive evaluation. The text is recommended for chemists and engineers in the field of materials science, especially those who wish to know more about the progress in its field of research.

Download or read book Containerless Melt Processing of MnA1 based Alloys and Thermal Spray Deposition Processing of Pure Copper written by Yong Jin Kim and published by . This book was released on 1993 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Second International Microgravity Laboratory IML 2 Final Report written by R. S. Snyder and published by . This book was released on 1997 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Preparation of Space Experiments written by Vladimir Pletser and published by BoD – Books on Demand. This book was released on 2020-09-02 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains how researchers design, prepare, develop, test and fly their science experiments on microgravity platforms before sending them to space. All preparation phases are explained and presented, including aircraft parabolic flights as part of spaceflight preparation. Twenty international authors, all experts in their own microgravity research field, contribute to chapters describing their experience to prepare experiments before space flights. Fields covered are Physical Sciences and Life Sciences. Physical Sciences covers fluid physics (vibration effects on diffusion; red blood cell dynamics; cavitation in microgravity; capillary driven flows) and material sciences (electromagnetic levitator onboard International Space Station). Life Sciences includes human physiology (sampling earlobe blood; human cardiovascular experiments; tumours in space) and neurophysiology (dexterous manipulation of objects in weightlessness).

Download or read book Mechanical Engineering and Instrumentation written by Wei Deng and published by Trans Tech Publications Ltd. This book was released on 2014-02-06 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the 2013 International Conference on Mechanical Engineering and Instrumentation (ICMEI 2013), December 31, 2013-January 2, 2014, Brisbane Australia. Volume is indexed by Thomson Reuters CPCI-S (WoS). The 64 papers are grouped as follows: Chapter 1: Materials Science and Materials Processing Technology; Chapter 2: Computational and Applied Mechanics; Chapter 3: Design and Manufacturing; Chapter 4: Automation, Control, Information Technology and MEMS