Download or read book Fatigue of Materials written by Subra Suresh and published by Cambridge University Press. This book was released on 1998-10-29 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a leading researcher in the field, this revised and updated second edition of a highly successful book provides an authoritative, comprehensive and unified treatment of the mechanics and micromechanisms of fatigue in metals, non-metals and composites. The author discusses the principles of cyclic deformation, crack initiation and crack growth by fatigue, covering both microscopic and continuum aspects. The book begins with discussions of cyclic deformation and fatigue crack initiation in monocrystalline and polycrystalline ductile alloys as well as in brittle and semi-/non-crystalline solids. Total life and damage-tolerant approaches are then introduced in metals, non-metals and composites followed by more advanced topics. The book includes an extensive bibliography and a problem set for each chapter, together with worked-out example problems and case studies. This will be an important reference for anyone studying fracture and fatigue in materials science and engineering, mechanical, civil, nuclear and aerospace engineering, and biomechanics.
Download or read book Bearing Steels written by J. J. C. Hoo and published by ASTM International. This book was released on 1998 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of a November 1996 conference in New Orleans, update previous information and present new materials and processing relating to steel for the anti-friction bearing industry. Among other subjects, they cover steel cleanliness and measuring methods, bearing fatigue life, advanced steel
Download or read book Engineering Tribology written by Gwidon Stachowiak and published by Elsevier. This book was released on 2011-03-31 with total page 831 pages. Available in PDF, EPUB and Kindle. Book excerpt: As with the previous edition, the third edition of Engineering Tribology provides a thorough understanding of friction and wear using technologies such as lubrication and special materials. Tribology is a complex topic with its own terminology and specialized concepts, yet is vitally important throughout all engineering disciplines, including mechanical design, aerodynamics, fluid dynamics and biomedical engineering. This edition includes updated material on the hydrodynamic aspects of tribology as well as new advances in the field of biotribology, with a focus throughout on the engineering applications of tribology.This book offers an extensive range if illustrations which communicate the basic concepts of tribology in engineering better than text alone. All chapters include an extensive list of references and citations to facilitate further in-depth research and thorough navigation through particular subjects covered in each chapter. - Includes newly devised end-of-chapter problems - Provides a comprehensive overview of the mechanisms of wear, lubrication and friction in an accessible manner designed to aid non-specialists - Gives a reader-friendly approach to the subject using a graphic illustrative method to break down the typically complex problems associated with tribology
Download or read book Principles of Tribology written by Shizhu Wen and published by John Wiley & Sons. This book was released on 2012-02-21 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Professors Wen and Huang present current developments in tribology research along with tribology fundamentals and applications, including lubrication theory, lubrication design, friction mechanism, wear mechanism, friction control, and their applications. In addition to classical tribology, Wen and Huang cover the research areas of the modern tribology, as well as the regularities and characteristics of tribological phenomena in practice. Furthermore, the authors present the basic theory, numerical analysis methods, and experimental measuring techniques of tribology as well as their applications in engineering. Provides a systematic presentation of tribology fundamentals and their applications Discusses the current states and development trends in tribology research Applies the applications to modern day engineering Computer programs available for download from the book’s companion site Principles of Tribology is aimed at postgraduates and senior-level undergraduates studying tribology, and can be used for courses covering theory and applications. Tribology professionals and students specializing in allied areas of mechanical engineering and materials science will also find the book to be a helpful reference or introduction to the topic. Companion website for the book: www.wiley.com/go/wen/tribology
Download or read book Wheel Rail Interface Handbook written by R. Lewis and published by Elsevier. This book was released on 2009-09-25 with total page 865 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many of the engineering problems of particular importance to railways arise at interfaces and the safety-critical role of the wheel/rail interface is widely acknowledged. Better understanding of wheel/rail interfaces is therefore critical to improving the capacity, reliability and safety of the railway system.Wheel-rail interface handbook is a one-stop reference for railway engineering practitioners and academic researchers. Part one provides the fundamentals of contact mechanics, wear, fatigue and lubrication as well as state-of-the-art research and emerging technologies related to the wheel/rail interface and its management. Part two offers an overview of industrial practice from several different regions of the world, thereby providing an invaluable international perspective with practitioners' experience of managing the wheel/rail interface in a variety of environments and circumstances.This comprehensive volume will enable practising railway engineers, in whatever discipline of railway engineering – infrastructure, vehicle design and safety, and so on – to enhance their understanding of wheel/rail issues, which have a major influence on the running of a reliable, efficient and safe railway. - One-stop reference on the important topic of wheel rail-interfaces - Presents the fundamentals of contact mechanics, wear, fatigue and lubrication - Examines state-of-the-art research and emerging technologies related to wheel-rail interface and its management
Download or read book Micro and Nano Sulfide Solid Lubrication written by Haidou Wang and published by Springer Science & Business Media. This book was released on 2013-02-01 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Micro and Nano Sulfide Solid Lubrication" covers the basic principles of sulfide solid lubrication, which is an important field of tribology, an effective means of reducing friction and wear on machine parts, and is closely related to the broader problem of saving energy and materials. This book discusses the low-temperature sulfuration technology which was first developed in China, as well as the two-step methods for preparing various sulfide lubrication films (coatings) created by the authors, which are described in detail. This book is intended for researchers in the fields of tribology, materials science, mechanical design, and structural design. Dr. Haidou Wang and Binshi Xu are both professors at the National Key Laboratory for Remanufacturing, Academy of Armored Forces Engineering, China; Jiajun Liu is a professor at the Department of Mechanical Engineering, Tsinghua University, China.
Download or read book Engineering Tribology written by Gwidon W. Stachowiak and published by Elsevier. This book was released on 2001 with total page 774 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanisms of wear, friction and lubrication are comprehensively described in an accessible manner that is designed to be helpful to non-specialists. The control of wear is given extensive treatment with a thorough discussion of lubricant additives, solid lubricants and surface coatings. The effectiveness of coatings in suppressing specific forms of wear is described together with the methods of coating deposition. More than 1000 references are provided to give the reader access to more specialized information if required.
Download or read book Life Cycle Tribology written by Duncan Dowson and published by Elsevier. This book was released on 2005-10-13 with total page 933 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 31st Leeds-Lyon Symposium on Tribology was held at Trinity and All Saints College in Leeds under the title "Life Cycle Tribology" from Tuesday 7th September until Friday 10th September 2004. Over the three days of presentations that followed, life cycle tribology was explored across a range of areas including automotive tribology, bearings, bio-degradability and sustainability, bio-tribology, coatings, condition monitoring, contact mechanics, debris effects, elastohydrodynamic lubrication, lubricants, machine systems, nanotribology, rolling contact fatigue, transmissions, tribochemistry and wear and failure. Invited talks in these fields were presented by leading international researchers and practitioners, namely C.J. Hooke, J.A. Williams, R.J.K. Wood, G. Isaac, S.C. Tung, D. Price, I. Sherrington, M. Hadfield, K. Kato, R.I. Taylor, H.P. Evans, R.S. Dwyer-Joyce and H. Rahnejat.
Download or read book Rail Steels written by D. H. Stone and published by ASTM International. This book was released on 1978 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling and Analytical Methods in Tribology written by Ilya I. Kudish and published by CRC Press. This book was released on 2010-07-20 with total page 928 pages. Available in PDF, EPUB and Kindle. Book excerpt: Improving our understanding of friction, lubrication, and fatigue, Modeling and Analytical Methods in Tribology presents a fresh approach to tribology that links advances in applied mathematics with fundamental problems in tribology related to contact elasticity, fracture mechanics, and fluid film lubrication. The authors incorporate the classical tenets of tribology while providing new mathematical solutions that address various shortcomings in existing theories. From contact interactions to contact fatigue life, the book connects traditionally separate areas of tribology research to create a coherent modeling methodology that encompasses asymptotic and numerical techniques. The authors often demonstrate the efficacy of the models by comparing predictions to experimental data. In most cases, they derive equations from first principles. They also rigorously prove problem formulations and derive certain solution properties. Solutions to problems are presented using simple analytical formulas, graphs, and tables. In addition, the end-of-chapter exercises highlight points important for comprehending the material and mastering the appropriate skills. Unlocking the secrets that govern the physics of lubricated and dry contacts, this book helps tribologists on their quest to reduce friction, minimize wear, and extend the operating life of mechanical equipment. It provides a real-world industrial perspective so that readers can attain a practical understanding of the material.
Download or read book Technical Note National Advisory Committee for Aeronautics written by United States. National Advisory Committee for Aeronautics and published by . This book was released on 1958 with total page 1026 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Running In Process in Tribology written by D. Dowson and published by Elsevier. This book was released on 2016-10-27 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Running-In Process in Tribology is a collection of papers presented during the 8th Leeds-Lyon Symposium on Tribology held in the Institut National des Sciences Appliquées de Lyon, France in September 1981. The symposium was attended by 87 delegates from 13 countries, which showed a great level of interest on the scientific and industrial problems of running-in. Twenty eight papers are presented in the book, covering basic thermodynamics, mechanics of continuous solids, metallurgy, polymers, profilometry, and surface physics. Major topics such as elastohydrodynamics, roughness, and thermal effects in tribology are discussed as well. Mechanical engineers and materials scientists will find the book very insightful.
Download or read book Laser Cladding of Metals written by Pasquale Cavaliere and published by Springer Nature. This book was released on 2020-11-05 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser cladding is an additive manufacturing technology capable of producing coatings due to the surface fusion of metals. The selected powder is fed into a focused laser beam to be melted and deposited as coating. This allows to apply material in a selected way onto those required sections of complex components. The process main properties are the production of a perfect metallurgically bonded and fully dense coatings; the minimal heat affected zone and low dilution between the substrate and filler material resulting in functional coatings that perform at reduced thickness, so fewer layers are applied; fine, homogeneous microstructure resulting from the rapid solidification rate that promotes wear resistance of carbide coatings; near net-shape weld build-up requires little finishing effort; extended weldability of sensitive materials like carbon-rich steels or nickel-based superalloys that are difficult or even impossible to weld using conventional welding processes; post-weld heat treatment is often eliminated as the small heat affected zone minimizes component stress; excellent process stability and reproducibility because it is numerical controlled welding process. The typical applications are the dimensional restoration; the wear and corrosion protection; additive manufacturing. The wide range of materials that can be deposited and its suitability for treating small areas make laser cladding particularly appropriate to tailor surface properties to local service requirements and it opens up a new perspective for surface engineered materials. The main key aspect to be scientifically and technologically explored are the type of laser; the powders properties; the processing parameters; the consequent microstructural and mechanical properties of the processed material; the capability of fabrication of prototypes to rapid tooling and rapid manufacturing. Distills critical concepts, methods, and applications from leading full-length chapters, along with the authors’s own deep understanding of the material taught, into a concise yet rigorous graduate and advanced undergraduate text; Reinforces concepts covered with detailed solutions to illuminating and challenging industrial applications; Discusses current and future applications of laser cladding in additive manufacturing.
Download or read book Index of NACA Technical Publications written by United States. National Advisory Committee for Aeronautics and published by . This book was released on 1959 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bearing Steel Technology written by John M. Beswick and published by ASTM International. This book was released on 2007 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Selected Listing of NASA Scientific and Technical Reports for written by and published by . This book was released on 1957 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt:
