Download or read book Consumption Flexibility Product Configuration and Market Competition written by Liang Guo and published by . This book was released on 2007 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: When purchase and consumption decisions are separated in time and when future utility is state dependent, consumers may desire to pursue consumption flexibility by purchasing different products together (multiple buying). This paper analyzes the effects of consumption flexibility on competing firms' marketing mix decisions, in a model in which future preference uncertainty exists and consumers differ in their preferred product location on a horizontal attribute. The analysis shows that the nature of price competition in such markets is dependent upon whether consumer multiple buying (and thus primary demand) is endogenously induced. When preference uncertainty is important, the firms are involved in a flexibility trap in which primary demand is expanded but profits decrease with the spread of consumer heterogeneity. This counter-intuitive result is caused by the firms being induced to over-cut prices to increase primary demand when consumption flexibility is important. In response to this, the firms may configure their products to alleviate the adverse effect of consumer heterogeneity. For example, if preference uncertainty is important, the firms may choose to minimize differentiation on the horizontal attribute, or extend the current product line, to deal with the flexibility trap. The implications of allowing for positive salvage value, uncertainty heterogeneity, preference correlation, and state-dependent preference configuration are also investigated.
Download or read book Essays on Consumption Flexibility Stockpiling and Market Interaction written by Liang Guo and published by . This book was released on 2004 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook Of Research In Mass Customization And Personalization In 2 Volumes Volume 1 Strategies And Concepts Volume 2 Applications And Cases written by Frank T Piller and published by World Scientific. This book was released on 2009-12-30 with total page 1147 pages. Available in PDF, EPUB and Kindle. Book excerpt: A growing heterogeneity of demand, the advent of ';long tail markets';, exploding product complexities, and the rise of creative consumers are challenging companies in all industries to find new strategies to address these trends. Mass customization (MC) has emerged in the last decade as the premier strategy for companies in all branches of industry to profit from heterogeneity of demand and a broad scope of other customer demands.The research and practical experience collected in this book presents the latest thinking on how to make mass customization work. More than 50 authors from academia and management debate on what is viable now, what did not work in the past, and what lurks just below the radar in mass customization, personalization, and related fields.Edited by two leading authorities in the field of mass customization, both volumes of the book discuss, among many other themes, the latest research and insights on customization strategies, product design for mass customization, virtual models, co-design toolkits, customization value measurement, open source architecture, customization communities, and MC supply chains. Through a number of detailed case studies, prominent examples of mass customization are explained and evaluated in larger context and perspective.
Download or read book Handbook of Research in Mass Customization and Personalization written by Frank T. Piller and published by World Scientific. This book was released on 2010 with total page 1147 pages. Available in PDF, EPUB and Kindle. Book excerpt: A growing heterogeneity of demand, the advent of "long tail markets", exploding product complexities, and the rise of creative consumers are challenging companies in all industries to find new strategies to address these trends. Mass customization (MC) has emerged in the last decade as the premier strategy for companies in all branches of industry to profit from heterogeneity of demand and a broad scope of other customer demands. The research and practical experience collected in this book presents the latest thinking on how to make mass customization work. More than 50 authors from academia and management debate on what is viable now, what did not work in the past, and what lurks just below the radar in mass customization, personalization, and related fields. Edited by two leading authorities in the field of mass customization, both volumes of the book discuss, among many other themes, the latest research and insights on customization strategies, product design for mass customization, virtual models, co-design toolkits, customization value measurement, open source architecture, customization communities, and MC supply chains. Through a number of detailed case studies, prominent examples of mass customization are explained and evaluated in larger context and perspective.
Download or read book Research in Mass Customization and Personalization written by Mitchell and published by World Scientific. This book was released on 2009-12-01 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: A growing heterogeneity of demand, the advent of ';long tail markets';, exploding product complexities, and the rise of creative consumers are challenging companies in all industries to find new strategies to address these trends. Mass customization (MC) has emerged in the last decade as the premier strategy for companies in all branches of industry to profit from heterogeneity of demand and a broad scope of other customer demands.The research and practical experience collected in this book presents the latest thinking on how to make mass customization work. More than 50 authors from academia and management debate on what is viable now, what did not work in the past, and what lurks just below the radar in mass customization, personalization, and related fields.Edited by two leading authorities in the field of mass customization, both volumes of the book discuss, among many other themes, the latest research and insights on customization strategies, product design for mass customization, virtual models, co-design toolkits, customization value measurement, open source architecture, customization communities, and MC supply chains. Through a number of detailed case studies, prominent examples of mass customization are explained and evaluated in larger context and perspective.
Download or read book Advances in Manufacturing Production Management and Process Control written by Beata Mrugalska and published by Springer Nature. This book was released on 2020-06-30 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the latest advances in the broadly defined field of advanced manufacturing and process control. It reports on cutting-edge strategies for sustainable production and product life cycle management, and on a variety of people-centered issues in the design, operation and management of manufacturing systems and processes. Further, it presents digital modeling systems and additive manufacturing technologies, including advanced applications for different purposes, and discusses in detail the implementation of and challenges imposed by 3D printing technologies. Based on three AHFE 2020 Conferences (the AHFE 2020 Virtual Conference on Human Aspects of Advanced Manufacturing, the AHFE 2020 Virtual Conference on Advanced Production Management and Process Control and the AHFE 2020 Virtual Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, the book merges ergonomics research, design applications, and up-to-date analyses of various engineering processes. It brings together experimental studies, theoretical methods and best practices, highlights future trends and suggests directions for further technological developments and the improved integration of technologies and humans in the manufacturing industry.
Download or read book Data Driven Decision Making for Product Service Systems written by Giuditta Pezzotta and published by Springer Nature. This book was released on with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Enabling Manufacturing Competitiveness and Economic Sustainability written by Hoda A. ElMaraghy and published by Springer Science & Business Media. This book was released on 2011-09-29 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: The changing manufacturing environment requires more responsive and adaptable manufacturing systems. The theme of the 4th International Conference on Changeable, Agile, Reconfigurable and Virtual production (CARV2011) is “Enabling Manufacturing Competitiveness and Economic Sustainability”. Leading edge research and best implementation practices and experiences, which address these important issues and challenges, are presented. The proceedings include advances in manufacturing systems design, planning, evaluation, control and evolving paradigms such as mass customization, personalization, changeability, re-configurability and flexibility. New and important concepts such as the dynamic product families and platforms, co-evolution of products and systems, and methods for enhancing manufacturing systems’ economic sustainability and prolonging their life to produce more than one product generation are treated. Enablers of change in manufacturing systems, production volume and capability scalability and managing the volatility of markets, competition among global enterprises and the increasing complexity of products, manufacturing systems and management strategies are discussed. Industry challenges and future directions for research and development needed to help both practitioners and academicians are presented.
Download or read book JMR Journal of Marketing Research written by and published by . This book was released on 2005 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Economic Organization written by Anna Grandori and published by Edward Elgar Publishing. This book was released on 2013-01-01 with total page 641 pages. Available in PDF, EPUB and Kindle. Book excerpt: ÔThis excellent volume brings together some of the most interesting writings on economic organization. It covers a vast range of topics that fall under the heading of economic organization, and most if not all aspects of a variety of organizational economics and organization theories are presented. Interestingly, this book also extends beyond the more traditional approaches informed by economics and organization theory as it broadens the horizon of the field by including relevant contributions from economic sociology, cognitive psychology, law, and strategic management. Given its breadth and depth, this volume will become one of the standard reference books that will inspire both theoretical and empirical research.Õ Ð John Hagedoorn, Maastricht University, The Netherlands ÔThis important new Handbook of Economic Organization is a highly successful attempt to integrate economic and organization theory. Anna Grandori, who is herself a leading scholar located at the boundaries of economics and organization theory, is to be congratulated on doing a superb job bringing together such a high profile group of internationally acknowledged scholars. Each of the essays in the book are original and contribute to demonstrating the valuable insights that economics can make to our understanding of organization and organizational design. Anna GrandoriÕs introductory and concluding chapters are not only excellent audits of the current state of our knowledge in this field but they also give a strong sense of direction for the possible futures of the discipline. Anna Grandori is not afraid to face head on some of the more philosophical issues relating to ÒorganizationÓ as an object of study and is to be commended for doing so. The economics of organization is a new, exciting and developing field and the essays in this book will help to shape the research agenda that will take this emergent discipline to its next stage.Õ Ð Peter M. Jackson, University of Leicester, UK ÔThis sweeping, comprehensive volume is a signal effort in building bridges between economics and organization theory. With a stellar cast of contributors, it will both inspire and provoke scholars with its grand amibitions, and generate considerable attention and debate. A remarkable effort by Anna Grandori.Õ Ð Walter W. Powell, Stanford University, US ÔAnna Grandori has astutely organized the commissioned chapters of an intellectually diverse set of scholars into an absolutely outstanding contribution that both defines the current state of organizational economics and points the perceptive reader toward an exciting intellectual future. From traditional research areas to the newest topics of interest, the chapters chart the current boundaries of the field. The chapters are filled with gems of insight across several distinct levels of analysis, whether it is a discussion of organizational design, or psychological economics or innovation or the organization as language, the discussions are contemporary, comprehensive and challenging. No serious scholar of organizational economics should be without this book.Õ Ð Richard N. Osborn, Wayne State University, US This comprehensive and groundbreaking Handbook integrates economic and organization theories to help elucidate the design and evolution of economic organization. Economic organization is regarded both as a subject of inquiry and as an emerging disciplinary field in its own right, integrating insights from economics, organization theory, strategy and management, economic sociology and cognitive psychology. The contributors, who share this integrated approach, are distinguished scholars at the productive peak in their fields. Each original, state-of-the art chapter not only addresses foundational issues, but also identifies key issues for future research. This original and wide-ranging Handbook will be a useful and thought-provoking read for academics, students and researchers in the fields of organization, management and economics.
Download or read book Mass Customization for Personalized Communication Environments Integrating Human Factors written by Mourlas, Constantinos and published by IGI Global. This book was released on 2009-10-31 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book focuses on the customization of services and communication environments to advance user satisfaction--Provided by publisher.
Download or read book Industrial Engineering and Operations Management written by Antônio Márcio Tavares Thomé and published by Springer Nature. This book was released on 2020-10-29 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume gathers selected peer-reviewed papers presented at the XXVI International Joint Conference on Industrial Engineering and Operations Management (IJCIEOM), held on July 8-11, 2020 in Rio de Janeiro, Brazil. The respective chapters address a range of timely topics in industrial engineering, including operations and process management, global operations, managerial economics, data science and stochastic optimization, logistics and supply chain management, quality management, product development, strategy and organizational engineering, knowledge and information management, work and human factors, sustainability, production engineering education, healthcare operations management, disaster management, and more. These topics broadly involve fields like operations, manufacturing, industrial and production engineering, and management. Given its scope, the book offers a valuable resource for those engaged in optimization research, operations research, and practitioners alike.
Download or read book Annual Energy Outlook 2012 with Projections To 2035 written by Energy Information Administration (U S ) and published by Government Printing Office. This book was released on 2012-10-04 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The projections in the U.S. Energy Information Administration's (EIA's) Annual Energy Outlook 2012 (AEO2012) focus on the factors that shape the U.S. energy system over the long term. Under the assumption that current laws and regulations remain unchanged throughout the projections, the AEO2012 Reference case provides the basis for examination and discussion of energy production, consumption, technology, and market trends and the direction they may take in the future. It also serves as a starting point for analysis of potential changes in energy policies. But AEO2012 is not limited to the Reference case. It also includes 29 alternative cases (see Appendix E, Table E1), which explore important areas of uncertainty for markets, technologies, and policies in the U.S. energy economy. Many of the implications of the alternative cases are discussed in the 'Issues in focus' section of this report. / Key results highlighted in AEO2012 include continued modest growth in demand for energy over the next 25 years and increased domestic crude oil and natural gas production, largely driven by rising production from tight oil and shale resources. As a result, U.S. reliance on imported oil is reduced; domestic production of natural gas exceeds consumption, allowing for net exports; a growing share of U.S. electric power generation is met with natural gas and renewables; and energy-related carbon dioxide emissions remain below their 2005 level from 2010 to 2035, even in the absence of new Federal policies designed to mitigate greenhouse gas (GHG) emissions."--Executive Summary (p. 2).
Download or read book Enabling Manufacturing Competitiveness and Economic Sustainability written by Michael F. Zaeh and published by Springer Science & Business Media. This book was released on 2013-09-12 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: The changing manufacturing environment requires more responsive and adaptable manufacturing systems. The theme of the 5th International Conference on Changeable, Agile, Reconfigurable and Virtual production (CARV2013) is "Enabling Manufacturing Competitiveness and Economic Sustainability. Leading edge research and best implementation practices and experiences, which address these important issues and challenges, are presented. The proceedings include advances in manufacturing systems design, planning, evaluation, control and evolving paradigms such as mass customization, personalization, changeability, re-configurability and flexibility. New and important concepts such as the dynamic product families and platforms, co-evolution of products and systems, and methods for enhancing manufacturing systems' economic sustainability and prolonging their life to produce more than one product generation are treated. Enablers of change in manufacturing systems, production volume and capability, scalability and managing the volatility of markets, competition among global enterprises and the increasing complexity of products, manufacturing systems and management strategies are discussed. Industry challenges and future directions for research and development needed to help both practitioners and academicians are presented. About the Editor Prof. Dr.-Ing. Michael F. Zaeh, born in 1963, has been and is Professor for and Manufacturing Technology since 2002 and, together with Prof. Dr.-Ing. Gunther Reinhart, Head of the Institute for Machine Tools and Industrial Management (iwb) at the Technische Universitaet Muenchen (TUM). After studying general mechanical engineering, he was doctoral candidate under Prof. Dr.-Ing. Joachim Milberg at TUM from 1990 until 1993 and received his doctorate in 1993. From 1994 to 1995, he was department leader under Prof. Dr.-Ing. Gunther Reinhart. From 1996 to 2002, he worked for a machine tool manufacturer in several positions, most recently as a member of the extended management. Prof. Dr.-Ing. Michael F. Zaeh is an associated member of the CIRP and member of acatech, WGP and WLP. His current researches include among others Joining and Cutting Technologies like Laser Cutting and Welding as well as Friction Stir Welding, Structural Behaviour and Energy Efficiency of Machine Tools and Manufacturing Processes like Additive Manufacturing.
Download or read book Business Periodicals Index written by and published by . This book was released on 2006 with total page 2844 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Competitive Assessment of the U S Flexible Manufacturing Systems Industry written by and published by . This book was released on 1985 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Industrialization and Development written by Ray Kiely and published by Taylor & Francis. This book was released on 2023-05-09 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introductory development studies text which puts industrialization into theoretical context, examines the forms it has taken, and considers economically efficient and socially responsible alternatives.
