Download or read book Construction Technology Level 2 written by Barritt and published by Addison Wesley Publishing Company. This book was released on 1987-01-01 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Construction Technology Level 2 written by Richard Lewis Fullerton and published by . This book was released on 1982 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Construction Technology 2 Industrial and Commercial Building written by Mike Riley and published by Bloomsbury Publishing. This book was released on 2018-02-20 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed in a structured, directed format to help develop understanding, rather than just providing a simple source of information, this popular undergraduate textbook offers comprehensive coverage of industrial and commercial building technology. It builds on material in the first volume in the series Construction Technology 1: House Construction but it is also valuable as a standalone text. The most student-friendly textbook in the area, it uses a wealth of features to reinforce understanding and test knowledge, including case studies and comparative studies. Case studies include photographs and commentary on specific aspects of the technology of framed buildings, while comparative studies allow the reader to make a critical evaluation, comparing and contrasting design details and solutions. This textbook is aimed at undergraduates in Construction Management, Quantity Surveying and Building Surveying, and HNC/D students in the same areas. It is also ideal for associated Built Environment courses e.g. Land Management, Civil Engineering, where the basic technologies need to be understood. New to this Edition: - Thoroughly revised throughout - New material on sustainable construction incorporated as a key theme in each aspect of technology - A new chapter on building services installations - A new section of the highly topical subject of Building Information Modelling (BIM)
Download or read book Construction Technology 3 written by Mike Riley and published by . This book was released on 2011 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: With an added emphasis on sustainability and energy performance as well as new sections on flooding and health and safety, this new edition has been thoroughly updated for Building Technology or Construction Management students studying the technology of refurbishment and rehabilitation of buildings.
Download or read book Architectural and Building Construction Technology written by United States. Office of Education and published by . This book was released on 1969 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Construction Technology written by Eric Fleming and published by John Wiley & Sons. This book was released on 2009-02-12 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new textbook provides a comprehensive introduction to everyaspect of the technology of low-rise construction. It includessub-structure (site work, setting out and foundations) andsuperstructure (flooring, roofs, finishes, fittings and fixtures).The material here covers the first year course requirement of allcourses on which construction technology is taught - no matter whatthe ultimate qualification. It offers tried and tested solutions to a range of constructionproblems and is organised following the sequence of construction.It will show what has been done in the past, demonstrating goodpractice - what works and what doesn't - and common faults. Thereare summaries of the more important BSI documents and reference tothe latest building regulations. Lengthy explanations are avoided by relying heavily on hundreds ofillustrations, pairing detail drawings with clear photographs toshow real life construction situations. The supporting spreadsheet referred to in the book can be found atthis linkhttp://www.blackwellpublishing.com/pdf/fleming/Fleming_spreadsheet.xls
Download or read book Construction Technology Volume 1 and 2 AIG Perfect Bound shrinkwrapped Together written by NCCER and published by Prentice Hall. This book was released on 2006-02-09 with total page 1038 pages. Available in PDF, EPUB and Kindle. Book excerpt: This exceptionally produced trainee guide features a highly illustrated design, technical hints and tips from industry experts, review questions and a whole lot more! Key content includes Roof Framing, Roofing Applications, Exterior Finishing, Stairs, Electrical Safety, Wiring: Commercial and Industrial, Introduction to Drain, Waste and Vent Systems, Plastic Pipe and Fittings, and Copper Pipe and Fittings.
Download or read book Construction Science and Materials written by Surinder Singh Virdi and published by John Wiley & Sons. This book was released on 2017-01-09 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Construction Science & Materials is designed to cover topics studied at levels 2 – 5 on Construction HND courses and is also suitable for first year undergraduates on construction courses as well as Building surveying, Architectural Technology and Quantity Surveying. It is an essential text for those who have done no science since their GCSEs. Divided into 17 chapters, each with written explanations supplemented by solved examples and relevant diagrams to substantiate the text. Chapters end with numerical questions covering a range of problems and their answers are given at the end of the book and on the book’s website.
Download or read book Construction Technology written by Rajesh Kumar R and published by Jyothis Publishers. This book was released on 2020-01-01 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Construction technology focuses on principles, use of standards, and the steps involved in the design and construction of buildings and structures. We have included numerous neatly drawn figures for the better understanding of the subject. The book is organized in six modules as per the syllabus of the 4th semester B.Tech. in Civil Engineering course under APJ Abdul Kalam Technological University, Kerala.
Download or read book Construction Technology 2 Checkbook written by R. Chudley and published by . This book was released on 1981 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tennessee Residential and Commercial Construction I Level 2 Trainee Guide written by NCCER and published by Pearson. This book was released on 2017-03-29 with total page 759 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the eBook of the printed book and may not include any media, website access codes, or print supplements that may come packaged with the bound book. Tennessee Residential and Commercial Construction I (Level 2), ©2017 ISBN: 978-0-13-452963-9 SUMMARY: This custom text contains selected modules from NCCER’s Construction Technology curriculum designed by highly qualified subject matter experts and includes theoretical and practical skills, and is ideal for programs in construction. It consists of modules from various NCCER programs and is available in full color. To provide a comprehensive, user-friendly resource, the text incorporates various features to provide students with the proper tools to get started in the trade. These features include: - Learning objectives, Performance Tasks, and Trade Terms are found at beginning of each module - Color illustrations and photographs are used throughout the text to highlight important concepts and help clarify complex instructions - Special Features provide a head start for those entering the field by presenting technical tips and professional practices from operators in various disciplines - Safety features are set off from the main text in highlighted boxes and organized into Notes, Cautions, and Warnings based on the potential danger of the issue being addressed - Going Green looks at ways to preserve the environment, save energy, and make good choices regarding the health of the planet - Did You Know features offers hints, tips, and other helpful information from the trade - Step-by-step instructions guide students through technical procedures and tasks - Each module presents a list of Trade Terms that are discussed within the text and defined at the end of each module - Review Questions at the end of each module are provided to reinforce the knowledge students have gained Supplements: An electronic version of the book is also available in the VitalSource platform. A printed Teacher Edition, ISBN 978-0-13-452964-6, contains an instructor’s copy of the student edition as well as lesson plans for each module, and online access to the Test Bank, PowerPoints and other instructor resources
Download or read book Ancient Building Technology Volume 3 Construction 2 vols written by G.R.H. Wright and published by BRILL. This book was released on 2009-11-23 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building construction is the subject of this third part of the Ancient Building Technology set (TCH 4 and TCH 7 dealing with the history of building and building materials). Beginning with the formulation of a project (drawings, specifications and estimates of quantities) it goes on to discuss preliminary site surveying and setting out, followed by building site development and its attendant installations, and then examines the disposition of the various building materials (wood, stone, brick, and concrete) in building construction from pre-history to the end of antiquity. The work is intended as a ready reference compendium of information which otherwise would require extended research to come by. It should be of service to all students of antiquity, and a particular convenience to have on hand during archaeological field work. This volume is published in two parts, the first containing the discussion and the second more than 400 illustrations, completing the discussion.
Download or read book Construction Mathematics written by Surinder Virdi and published by Routledge. This book was released on 2014-03-21 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: Construction Mathematics is an introductory level mathematics text, written specifically for students of construction and related disciplines. Learn by tackling exercises based on real-life construction maths. Examples include: costing calculations, labour costs, cost of materials and setting out of building components. Suitable for beginners and easy to follow throughout. Learn the essential basic theory along with the practical necessities. The second edition of this popular textbook is fully updated to match new curricula, and expanded to include even more learning exercises. End of chapter exercises cover a range of theoretical as well as practical problems commonly found in construction practice, and three detailed assignments based on practical tasks give students the opportunity to apply all the knowledge they have gained. Construction Mathematics addresses all the mathematical requirements of Level 2 construction NVQs from City & Guilds/CITB and Edexcel courses, including the BTEC First Diploma in Construction. Additional coverage of the core unit Mathematics in Construction and the Built Environment from BTEC National Construction, Civil Engineering and Building Services courses makes this an essential revision aid for students who do not have Level 2 mathematics experience before commencing their BTEC National studies. This is also the ideal primer for any reader who wishes to refresh their mathematics knowledge before going into a construction HNC or BSc.
Download or read book Construction Technology written by Roy Chudley and published by . This book was released on 1987 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Earthen Construction Technology written by Annick Daneels and published by Archaeopress Publishing Ltd. This book was released on 2021-02-25 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents papers from Session IV-5 of the 18th UISPP World Congress (Paris, June 2018). The archaeological study of earthen construction has until now focused on typology and conservation; papers here instead consider their construction and anthropological importance.
Download or read book Construction Technology Practices written by Sagar Sarangi and published by Educreation Publishing. This book was released on with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides comprehensive coverage of all the construction activities starting from the beginning to the finishing of a project. It also covers the latest construction technology, such as concrete technology, mechanized construction equipment's. The book contents a detailed description of various topics such as earth work excavation, transportation, finishing work. The theory is presented in a simple and systematic process with attractive images. It also touches on basic ideas about the contracts and accounting, as it is shadow of a civil engineer/ site engineer/ contractors etc. The extensive coverage of all the topics makes this book is helpful for the students of civil engineering/mining students & professionals
Download or read book The Construction Technology Handbook written by Hugh Seaton and published by John Wiley & Sons. This book was released on 2021-01-07 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tired of new software that doesn't seem to work in the field? Ready to get your teams up to speed and productive with the latest tools? The Construction Technology Handbook takes a ground up, no jargon look at technology in the construction industry. From clear, quickly grasped explanations of how popular software actually works to how companies both large and small can efficiently try out and onboard new tools, this book unlocks new ways for construction field teams, firm owners, managers, leaders, and employees to do business. You'll learn about: Simple frameworks for making sense of all the new options cropping up How software and data work and how they work together to make your job easier and safer What artificial intelligence really is and how it can help real companies today Tools that are just over the horizon that will, one day, make your job just a little bit easier New and practical resources to help you incorporate an attitude of innovation and technology adoption into your workplace Perfect for general contractors and subcontractors, The Construction Technology Handbook also belongs on the bookshelves of construction technology vendors and construction workers who want to better understand the needs of the construction industry and the inner workings of construction technology, respectively.
