Download or read book Construction Technology written by Roy Chudley and published by Longman. This book was released on 1987 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: The four volumes of Construction Technology provide a comprehensive guide to building technology from simple domestic single storey construction using traditional techniques to more complex multi-storey construction using more modern industrialised techniques. Each volume describes the technology concisely and is well illustrated with the author's own illustrations. The series provides a basic knowledge of all building activities from basic methods of construction in the early volumes through to more complex topics such as site planning, curtain walling and builders plant in later volumes. The series concentrates on the technology and avoids lengthy descriptive passages, leaving the description to the author's very detailed drawings. Volume 2 completes the coverage of conventional methods and materials of construction. As with volume 1, it deals with the construction of a small structure such as a bungalow or two-storey house. The book introduces more complex topics than are covered in volume 1. It deals with site and temporary works, e.g. simple excavations and scaffolding; substructure topics such as retaining walls and reinforce concrete foundations; simple framed buildings; floors and roof structures such as precast concrete floors and asphalt and lead-covered roofs; finishes and fittings such as simple concrete stairs; insulation; and services such as electrical and gas installations.
Download or read book Construction Technology written by Eric Fleming and published by John Wiley & Sons. This book was released on 2009-02-12 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new textbook provides a comprehensive introduction to everyaspect of the technology of low-rise construction. It includessub-structure (site work, setting out and foundations) andsuperstructure (flooring, roofs, finishes, fittings and fixtures).The material here covers the first year course requirement of allcourses on which construction technology is taught - no matter whatthe ultimate qualification. It offers tried and tested solutions to a range of constructionproblems and is organised following the sequence of construction.It will show what has been done in the past, demonstrating goodpractice - what works and what doesn't - and common faults. Thereare summaries of the more important BSI documents and reference tothe latest building regulations. Lengthy explanations are avoided by relying heavily on hundreds ofillustrations, pairing detail drawings with clear photographs toshow real life construction situations. The supporting spreadsheet referred to in the book can be found atthis linkhttp://www.blackwellpublishing.com/pdf/fleming/Fleming_spreadsheet.xls
Download or read book Sustainable Construction Technologies written by Vivian Y. Tam and published by Butterworth-Heinemann. This book was released on 2019-01-03 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Construction Technologies: Life-Cycle Assessment provides practitioners with a tool to help them select technologies that are financially advantageous even though they have a higher initial cost. Chapters provide an overview of LCA and how it can be used in conjunction with other indicators to manage construction. Topics covered include indoor environment quality, energy efficiency, transport, water reuse, materials, land use and ecology, and more. The book presents a valuable tool for construction professionals and researchers that want to apply sustainable construction techniques to their projects. Practitioners will find the international case studies and discussions of worldwide regulation and standards particularly useful. Provides a framework for analyzing sustainable construction technologies and economic viability Introduces key credit criteria for different sustainable construction technologies Covers the most relevant construction areas Includes technologies that can be employed during the process of construction, or to the product of the construction process, i.e. buildings Analyzes international rating systems and provides supporting case studies
Download or read book Advanced Construction Technology written by Roy Chudley and published by Pearson Education. This book was released on 2006 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Construction Technology offers a comprehensive, practical, illustrative guide to many aspects of construction practice used for industrial and commercial buildings.
Download or read book Construction Technology for Tall Buildings written by M. Y. L. Chew and published by World Scientific. This book was released on 2001 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study describes current construction practices and processes for tall buildings from foundation to roof. It discusses the construction sequence of the various proprietary systems and their merits and disadvantages.
Download or read book Construction Technology 2 Industrial and Commercial Building written by Mike Riley and published by Bloomsbury Publishing. This book was released on 2018-02-20 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed in a structured, directed format to help develop understanding, rather than just providing a simple source of information, this popular undergraduate textbook offers comprehensive coverage of industrial and commercial building technology. It builds on material in the first volume in the series Construction Technology 1: House Construction but it is also valuable as a standalone text. The most student-friendly textbook in the area, it uses a wealth of features to reinforce understanding and test knowledge, including case studies and comparative studies. Case studies include photographs and commentary on specific aspects of the technology of framed buildings, while comparative studies allow the reader to make a critical evaluation, comparing and contrasting design details and solutions. This textbook is aimed at undergraduates in Construction Management, Quantity Surveying and Building Surveying, and HNC/D students in the same areas. It is also ideal for associated Built Environment courses e.g. Land Management, Civil Engineering, where the basic technologies need to be understood. New to this Edition: - Thoroughly revised throughout - New material on sustainable construction incorporated as a key theme in each aspect of technology - A new chapter on building services installations - A new section of the highly topical subject of Building Information Modelling (BIM)
Download or read book Construction Technology written by Tony Bryan and published by John Wiley & Sons. This book was released on 2015-09-14 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Construction Technology: Analysis and Choice has been expanded to include commercial buildings. This now covers, in a single textbook, all the basic forms of construction studied on professional courses. The book takes as its theme the process of choice: what the expert has to know and how he/she might think through the decisions to be made about the design, production, maintenance and disposal of buildings. It is written with the conviction that by focusing on the process of choice, the range of theory and knowledge that is useful to practice becomes explicit, making the link between knowledge and practice, and between understanding and experience. The new edition has been updated throughout with extensive additions to Chapter13: Manufacture and Assembly and to Chapter 15: Sustainability. An entire new section has been added, covering all the main elements of commercial construction. Students will find here explanations of how environments, structural behaviour, production know-how, cost and social concerns such as sustainability can be taken into account in the choice of construction. They will also gain a clear understanding of the construction details and specifications adopted for both housing and commercial buildings in the UK at the beginning of the 21st century. Provides a framework to think through proposed solutions Sets the choice of solution in both time and place, and in the context of sustainability Focuses on key questions: will the proposal fail; and can it be built? Considers a building’s response to loading, environmental conditions and time Looks at the production process as manufacture and assembly Book website at www.wiley.com/go/bryanconstructiontech2e Contains nearly 200 fully referenced, clear line drawings to download for free, as well as suggested learning activities for lecturers to incorporate into their teaching programmes.
Download or read book Ancient Construction Technology written by Michael Woods and published by Twenty-First Century Books. This book was released on 2011-01-01 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes the technology used by ancient societies to create such monumental structures as temples, pyramids, walls, arches, and bridges, including the ancient civilizations of China, Greece, Rome, India, and the Middle East.
Download or read book Fundamental Building Technology written by Andrew J. Charlett and published by Routledge. This book was released on 2013-01-25 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental Building Technology introduces the technology, methods, and processes fundamental to construction by focussing on what is involved in building a typical low-rise house. Written with the novice in mind, this textbook is the ideal starting point for any construction student, as it fully supports the reader all the way to understanding the functional requirements of each element of the building, and how to take these into account through the building process itself. This second edition is expanded to cover even more relevant topics, and is supported by more resources for use by the student and lecturer. Now included are: An introduction to the planning process and the building regulations How to incorporate a sustainable approach, in the selection of materials and elsewhere A companion site with lecturer’s answers manual and illustrated lecture notes 150 labelled diagrams throughout the book, and multiple self-study questions in every chapter A students’ section of the companion site with multiple choice quizzes and 250 full-colour photos linked to chapters of the book Concise, focussed and the most student-friendly guide to this topic available, Fundamental Building Technology is the perfect textbook for those taking construction technology modules at undergraduate or HNC/HND level.
Download or read book Building Technology written by Ivor H. Seeley and published by . This book was released on 1980 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Barry s Introduction to Construction of Buildings written by Stephen Emmitt and published by John Wiley & Sons. This book was released on 2009-02-05 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: The five volume series, Barry's Construction of Buildings,has been established as a standard text on building technology formany years. However, a substantial update has long been required,and while doing this the opportunity has been taken to reduce fivevolumes to two in a more user-friendly format. The introductory volume covers domestic construction and bringstogether material from volumes 1, 2 and part of 5. The extensiverevision includes modern concepts on site assembly, environmentalissues and safety, and features further reading.
Download or read book 3D Concrete Printing Technology written by Jay G. Sanjayan and published by Butterworth-Heinemann. This book was released on 2019-02-15 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D Concrete Printing Technology provides valuable insights into the new manufacturing techniques and technologies needed to produce concrete materials. In this book, the editors explain the concrete printing process for mix design and the fresh properties for the high-performance printing of concrete, along with commentary regarding their extrudability, workability and buildability. This is followed by a discussion of three large-scale 3D printings of ultra-high performance concretes, including their processing setup, computational design, printing process and materials characterization. Properties of 3D-printed fiber-reinforced Portland cement paste and its flexural and compressive strength, density and porosity and the 3D-printing of hierarchical materials is also covered. Explores the factors influencing the mechanical properties of 3D printed products out of magnesium potassium phosphate cement material Includes methods for developing Concrete Polymer Building Components for 3D Printing Provides methods for formulating geopolymers for 3D printing for construction applications
Download or read book The Social Construction of Technological Systems written by Wiebe E. Bijker and published by MIT Press. This book was released on 1989 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The impact of technology on society is clear and unmistakeable. The influence of society on technology is more subtle. The 13 essays in this book have been written by a diverse group of scholars united by a common interest in creating a new field - the sociology of technology. They draw on a wide array of case studies - from cooking stoves to missile systems, from 15th-century Portugal to today's Al labs - to outline an original research program based on a synthesis of ideas from the social studies of science and the history of technology. Together they affirm the need for a study of technology that gives equal weight to technical, social, economic, and political questions"--Back cover.
Download or read book Construction Technology for High Rise Buildings written by Bassem M. and published by Createspace Independent Publishing Platform. This book was released on 2018-10-29 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: (Black & White on White paper) This book is directed mainly toward Construction Management, Construction Engineering and Contractors and it has three objectives, the first is to provide technical guide for students taking courses in civil or structural engineering, the second is to serve as a quick reference for professional engineers to a wide variety of construction information, the third is to present a tool to assist Contractors in selecting the optimal construction technique. Practitioners or Organizations involved in the building industry, such as Owners, Architects, Project Managers, General Contractors, and Subcontractors for building projects can use this book as a handy reference.I will be grateful to the readers for their comments and suggestions for further improvement of the book.
Download or read book Construction Technology written by Tony Bryan and published by John Wiley & Sons. This book was released on 2010-03-22 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Construction Technology: Analysis and Choice has been expanded to include commercial buildings. This now covers, in a single textbook, all the basic forms of construction studied on professional courses. The book takes as its theme the process of choice: what the expert has to know and how he/she might think through the decisions to be made about the design, production, maintenance and disposal of buildings. It is written with the conviction that by focusing on the process of choice, the range of theory and knowledge that is useful to practice becomes explicit, making the link between knowledge and practice, and between understanding and experience. The new edition has been updated throughout with extensive additions to Chapter13: Manufacture and Assembly and to Chapter 15: Sustainability. An entire new section has been added, covering all the main elements of commercial construction. Students will find here explanations of how environments, structural behaviour, production know-how, cost and social concerns such as sustainability can be taken into account in the choice of construction. They will also gain a clear understanding of the construction details and specifications adopted for both housing and commercial buildings in the UK at the beginning of the 21st century. Provides a framework to think through proposed solutions Sets the choice of solution in both time and place, and in the context of sustainability Focuses on key questions: will the proposal fail; and can it be built? Considers a building’s response to loading, environmental conditions and time Looks at the production process as manufacture and assembly Book website at www.wiley.com/go/bryanconstructiontech2e Contains nearly 200 fully referenced, clear line drawings to download for free, as well as suggested learning activities for lecturers to incorporate into their teaching programmes.
Download or read book Construction Technology Trainee Guide Hardcover written by NCCER and published by Prentice Hall. This book was released on 2009-06-22 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This curriculum is ideal for programs formatted as Construction Cluster or Building Trades. It consists of modules compiled from five existing NCCER programs. * 425 Hours (Includes 72.5 hours of Core Curriculum, which is a prerequisite for completion and must be purch This exceptionally produced trainee guide features a highly illustrated design, technical hints and tips from industry experts, review questions and a whole lot more! New printed Instructor's Package includes access code to download TestGen software, module exams, PowerPoints®, and performance profile sheets from www.nccerirc.com. Instructor's Guide: $140 978-0-13-454300-0
Download or read book Construction Technology 3 written by Mike Riley and published by Red Globe Press. This book was released on 2011-04-28 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title covers the technology of refurbishment in both housing and large-span multi-storey commercial and industrial buildings.
