Download or read book Advances in Construction and Demolition Waste Recycling written by F Pacheco Torgal and published by Woodhead Publishing. This book was released on 2020-02-10 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Construction and Demolition Waste Recycling: Management, Processing and Environmental Assessment is divided over three parts. Part One focuses on the management of construction and demolition waste, including estimation of quantities and the use of BIM and GIS tools. Part Two reviews the processing of recycled aggregates, along with the performance of concrete mixtures using different types of recycled aggregates. Part Three looks at the environmental assessment of non-hazardous waste. This book will be a standard reference for civil engineers, structural engineers, architects and academic researchers working in the field of construction and demolition waste. Summarizes key recent research in recycling and reusing concrete and demolition waste to reduce environmental impacts Considers techniques for managing construction and demolition waste, including waste management plans, ways of estimating levels of waste, and the types and optimal location of waste recycling plants Reviews key steps in handling construction and demolition waste

Download or read book Handbook of Recycled Concrete and Demolition Waste written by F. Pacheco-Torgal and published by Elsevier. This book was released on 2013-09-30 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: The civil engineering sector accounts for a significant percentage of global material and energy consumption and is a major contributor of waste material. The ability to recycle and reuse concrete and demolition waste is critical to reducing environmental impacts in meeting national, regional and global environmental targets. Handbook of recycled concrete and demolition waste summarises key recent research in achieving these goals. Part one considers techniques for managing construction and demolition waste, including waste management plans, ways of estimating levels of waste, the types and optimal location of waste recycling plants and the economics of managing construction and demolition waste. Part two reviews key steps in handling construction and demolition waste. It begins with a comparison between conventional demolition and construction techniques before going on to discuss the preparation, refinement and quality control of concrete aggregates produced from waste. It concludes by assessing the mechanical properties, strength and durability of concrete made using recycled aggregates. Part three includes examples of the use of recycled aggregates in applications such as roads, pavements, high-performance concrete and alkali-activated or geopolymer cements. Finally, the book discusses environmental and safety issues such as the removal of gypsum, asbestos and alkali-silica reaction (ASR) concrete, as well as life-cycle analysis of concrete with recycled aggregates. Handbook of recycled concrete and demolition waste is a standard reference for all those involved in the civil engineering sector, as well as academic researchers in the field. Summarises key recent research in recycling and reusing concrete and demolition waste to reduce environmental impacts and meet national, regional and global environmental targets Considers techniques for managing construction and demolition waste, including waste management plans, ways of estimating levels of waste, the types and optimal location of waste recycling plants Reviews key steps in handling construction and demolition waste

Download or read book Construction Demolition and Disaster Waste Management written by Erik K. Lauritzen and published by CRC Press. This book was released on 2018-09-03 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Construction and Demolition Waste (CDW), from the construction, maintenance, renovation and demolition of buildings and structures, represents a large proportion of the waste in industrialized societies. Compared to other forms, such as household waste, more than 90% of CDW can be used as a resource and a substitute for construction materials, especially for primary, natural raw materials. Reuse, recovery and recycling depends on the quality and market for the materials, and the environmental impact of the processes for conversion of CDW from old structures to its use in new structures. However, the utilization today of CDW products as secondary resources is marginal. Most CDW is deposited or used as fill material, and the opportunities of high quality recycling are generally neglected. This book presents the opportunities for the sustainable and resource efficient utilisation of CDW, focusing on recycling of concrete and masonry as the major forms of CDW. The recycling of gypsum, timber, mineral wool, asphalt and other types are also described. Its aim is to present a chain of value and material streams in the transformation of obsolete buildings and structures into new buildings and structures. It takes a holistic view, focusing on the lifecycle economy (the circular economy) and integrated management aspects of various scenarios ranging from high industrial urban renewal to debris removal and management after disasters and conflicts. It is based on the author ́s 35 years of research and development combined with practical international experience within the demolition and recycling area. It addresses students, architects, civil engineers, building owners, public authorities and others working in urban planning, demolition and resource management in the building and construction sector and in the reconstruction of damaged buildings after disasters and wars.

Download or read book Recycled Aggregate in Concrete written by Jorge de Brito and published by Springer Science & Business Media. This book was released on 2012-11-28 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete is the most used man-made material in the world since its invention. The widespread use of this material has led to continuous developments such as ultra-high strength concrete and self-compacting concrete. Recycled Aggregate in Concrete: Use of Industrial, Construction and Demolition Waste focuses on the recent development which the use of various types of recycled waste materials as aggregate in the production of various types of concrete. By drawing together information and data from various fields and sources, Recycled Aggregate in Concrete: Use of Industrial, Construction and Demolition Waste provides full coverage of this subject. Divided into two parts, a compilation of varied literature data related to the use of various types of industrial waste as aggregates in concrete is followed by a discussion of the use of construction and demolition waste as aggregate in concrete. The properties of the aggregates and their effect on various concrete properties are presented, and the quantitative procedure to estimate the properties of concrete containing construction and demolition waste as aggregates is explained. Current codes and practices developed in various countries to use construction and demolition waste as aggregates in concrete and issues related to the sustainability of cement and concrete production are also discussed. The comprehensive information presented in Recycled Aggregate in Concrete: Use of Industrial, Construction and Demolition Waste will be helpful to graduate students, researchers and concrete technologists. The collected data will also be an essential reference for practicing engineers who face problems concerning the use of these materials in concrete production.

Download or read book Recycling Construction Demolition Waste A LEED Based Toolkit GreenSource written by Greg Winkler and published by McGraw Hill Professional. This book was released on 2010-08-02 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Complete Reference on Construction Waste Recycling This GreenSource guide offers comprehensive information on how to recycle as much as 95 percent of new construction and demolition waste, reuse existing materials, and comply with U.S. Green Building Council (USGBC) LEED waste management guidelines. Recycling Construction & Demolition Waste provides the strategies and tools you need to develop and implement a successful jobsite waste management plan. This practical resource also covers other programs that promote sustainable construction, such as the International Code Council's ICC-ES program, the National Association of Homebuilders (NAHB) Green Building Program, the Green Building Initiative Green Globes Program, BREEAM, and more. FIND OUT HOW TO: Manage construction and demolition waste on the jobsite Set up an efficient jobsite recycling center Recycle new construction waste Conduct an on-site audit to assess demolition waste Reuse existing materials, including asphalt, brick, concrete, insulation, structural steel, wood, glass, and more Develop a comprehensive waste management plan Comply with LEED standards to earn waste management credits Get details on other green certification and code programs Document waste management compliance Include appropriate specifications in construction documents Market your jobsite recycling program

Download or read book Concepts for Reuse and Recycling of Construction and Demolition Waste written by and published by DIANE Publishing. This book was released on with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book An Introduction to Recycling Construction and Demolition Waste written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2018-02-02 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory guidance for professional engineers and construction managers interested in recycling costruction and demolition waste.

Download or read book Report 22 Sustainable Raw Materials Construction and Demolition Waste State of the Art Report of RILEM Technical Committee 165 SRM written by Charles F. Hendriks and published by RILEM Publications. This book was released on 2000 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book RCRA in Focus written by and published by . This book was released on 2004 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Construction and Demolition Waste Management in Australia written by Salman Shooshtarian and published by . This book was released on 2021-12-15 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to the increase in construction activities worldwide and in Australia, the generation rate of construction and demolition (C&D) waste has significantly grown in recent years. In Australia, construction projects (i.e. housing, buildings and transport infrastructure) are being delivered at an unprecedented rate. Between 2009 and 2019, the annual average growth rate in this industry was 3.33%. The industry is identified as the fourth largest contributor to Australia's growth domestic product (GDP). Unsurprisingly, this quantity of construction brings about a considerable quantity of waste. In 2019, the construction industry generated 27 million tons (or megatonnes) of waste from construction and demolition activities in Australia. Given the size of the construction market and waste generated in this industry, any change will create huge impacts. The adequate management of such a quantity has now become a priority for policymakers around the world. A holistic national approach is required to handle the growing issue of C&D waste management in Australia. Therefore, this book identifies discrepancies and inconsistencies related to C&D waste management in different Australian jurisdictions. The included chapters discuss regulations governing the C&D waste stream, discrepancies in defining waste, Australia's place in the worldwide C&D waste market, opportunities for reducing C&D waste, and the perception among C&D waste stakeholders on relevant issues and proposed reforms, among other topics. Overall, the book contributes to the Australian understanding of effective management of C&D waste by providing a clear picture of C&D waste state of play. The book can benefit policymakers and whoever is interested in C&D waste to better plan for innovative and efficient C&D waste resulting in the further diversion of C&D waste from landfills.

Download or read book Construction and Demolition Debris written by Timothy G. Townsend and published by Springer Nature. This book was released on 2023-04-10 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses one of the major solid waste streams resulting from modern society, construction and demolition debris (CDD). CDD in the past has not received the same attention as other waste streams (e.g., municipal solid waste), but with the growing recognition of the environmental and economic importance of proper CDD management, this material now is the focus of attention of many government agencies and private businesses. This book provides a comprehensive review of CDD, its characteristics, environmental risks, and regulatory requirements, along with an in-depth discussion of the issues pertaining to CDD recycling and disposal.

Download or read book Designing Sustainable Technologies Products and Policies written by Enrico Benetto and published by Springer. This book was released on 2018-07-03 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book provides insight into the implementation of Life Cycle approaches along the entire business value chain, supporting environmental, social and economic sustainability related to the development of industrial technologies, products, services and policies; and the development and management of smart agricultural systems, smart mobility systems, urban infrastructures and energy for the built environment. The book is based on papers presented at the 8th International Life Cycle Management Conference that took place from September 3-6, 2017 in Luxembourg, and which was organized by the Luxembourg Institute of Science and Technology (LIST) and the University of Luxembourg in the framework of the LCM Conference Series.

Download or read book Construction and Demolition Waste written by Stephen D. Cosper and published by . This book was released on 1993 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book What a Waste 2 0 written by Silpa Kaza and published by World Bank Publications. This book was released on 2018-12-06 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid waste management affects every person in the world. By 2050, the world is expected to increase waste generation by 70 percent, from 2.01 billion tonnes of waste in 2016 to 3.40 billion tonnes of waste annually. Individuals and governments make decisions about consumption and waste management that affect the daily health, productivity, and cleanliness of communities. Poorly managed waste is contaminating the world’s oceans, clogging drains and causing flooding, transmitting diseases, increasing respiratory problems, harming animals that consume waste unknowingly, and affecting economic development. Unmanaged and improperly managed waste from decades of economic growth requires urgent action at all levels of society. What a Waste 2.0: A Global Snapshot of Solid Waste Management to 2050 aggregates extensive solid aste data at the national and urban levels. It estimates and projects waste generation to 2030 and 2050. Beyond the core data metrics from waste generation to disposal, the report provides information on waste management costs, revenues, and tariffs; special wastes; regulations; public communication; administrative and operational models; and the informal sector. Solid waste management accounts for approximately 20 percent of municipal budgets in low-income countries and 10 percent of municipal budgets in middle-income countries, on average. Waste management is often under the jurisdiction of local authorities facing competing priorities and limited resources and capacities in planning, contract management, and operational monitoring. These factors make sustainable waste management a complicated proposition; most low- and middle-income countries, and their respective cities, are struggling to address these challenges. Waste management data are critical to creating policy and planning for local contexts. Understanding how much waste is generated—especially with rapid urbanization and population growth—as well as the types of waste generated helps local governments to select appropriate management methods and plan for future demand. It allows governments to design a system with a suitable number of vehicles, establish efficient routes, set targets for diversion of waste, track progress, and adapt as consumption patterns change. With accurate data, governments can realistically allocate resources, assess relevant technologies, and consider strategic partners for service provision, such as the private sector or nongovernmental organizations. What a Waste 2.0: A Global Snapshot of Solid Waste Management to 2050 provides the most up-to-date information available to empower citizens and governments around the world to effectively address the pressing global crisis of waste. Additional information is available at http://www.worldbank.org/what-a-waste.

Download or read book Demolition written by Mark Shaurette and published by Purdue University Press. This book was released on 2011-01-07 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the built environment ages, demolition has become a rapidly growing industry offering major employment opportunities. During the 1990s the number of contractors grew by nearly 60 percent and there are now over 800 US companies focused on demolition, as well as many more offering this service as part of their portfolio. It has also become an increasingly complex business, requiring a unique combination of project management skills, legal and contractual knowledge, and engineering skills from its practitioners. Created in partnership with the National Demolition Association, Demolition: Practices, Technology, and Management is written specifically with students of construction management and engineering in mind, although it will also be an invaluable reference resource for anyone involved in demolition projects. Since demolition has become such a central part of construction management, this audience includes practicing architects and engineers, general contractors, building and manufacturing facility owners, as well as government officials and regulators. Covered in the book is the full range of technical and management issues encountered by the demolition contractor and those who hire demolition contractors. These include modern demolition practices, the impact of different construction types, demolition regulations, estimating demolition work, demolition contracts, safety on the demolition project, typical demolition equipment, debris handling and recycling, use of explosives, demolition contractors' participation in disaster response, and demolition project management.

Download or read book Sustainable Waste Management and Recycling written by Mukesh C. Limbachiya and published by Thomas Telford. This book was released on 2004 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: The three volumes from part of the Proceedings of the two-day International Conference organised by the Concrete and Masonry Research Group within the School of Engineering at Kingston University, held in September 2004. The Conference deals with issues such as the regulatory framework, government policy, waste management, processing, recovery, the supply network, recycling opportunities, sustainable ways forward and the economics of sustainability.

Download or read book Geotechnics for Sustainable Infrastructure Development written by Phung Duc Long and published by Springer Nature. This book was released on 2019-11-28 with total page 1417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents 09 keynote and invited lectures and 177 technical papers from the 4th International Conference on Geotechnics for Sustainable Infrastructure Development, held on 28-29 Nov 2019 in Hanoi, Vietnam. The papers come from 35 countries of the five different continents, and are grouped in six conference themes: 1) Deep Foundations; 2) Tunnelling and Underground Spaces; 3) Ground Improvement; 4) Landslide and Erosion; 5) Geotechnical Modelling and Monitoring; and 6) Coastal Foundation Engineering. The keynote lectures are devoted by Prof. Harry Poulos (Australia), Prof. Adam Bezuijen (Belgium), Prof. Delwyn Fredlund (Canada), Prof. Lidija Zdravkovic (UK), Prof. Masaki Kitazume (Japan), and Prof. Mark Randolph (Australia). Four invited lectures are given by Prof. Charles Ng, ISSMGE President, Prof.Eun Chul Shin, ISSMGE Vice-President for Asia, Prof. Norikazu Shimizu (Japan), and Dr.Kenji Mori (Japan).