Download or read book 3D Concrete Printing Technology written by Jay G. Sanjayan and published by Butterworth-Heinemann. This book was released on 2019-02-15 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D Concrete Printing Technology provides valuable insights into the new manufacturing techniques and technologies needed to produce concrete materials. In this book, the editors explain the concrete printing process for mix design and the fresh properties for the high-performance printing of concrete, along with commentary regarding their extrudability, workability and buildability. This is followed by a discussion of three large-scale 3D printings of ultra-high performance concretes, including their processing setup, computational design, printing process and materials characterization. Properties of 3D-printed fiber-reinforced Portland cement paste and its flexural and compressive strength, density and porosity and the 3D-printing of hierarchical materials is also covered. Explores the factors influencing the mechanical properties of 3D printed products out of magnesium potassium phosphate cement material Includes methods for developing Concrete Polymer Building Components for 3D Printing Provides methods for formulating geopolymers for 3D printing for construction applications

Download or read book 3D Printing of Concrete written by Arnaud Perrot and published by John Wiley & Sons. This book was released on 2019-04-30 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: The introduction of digital manufacturing techniques, such as 3D printing applied to concrete material, opens up new perspectives on the way in which buildings are designed. Research on this theme is thriving and there is a high rate of innovation related to concrete. At the same time, the first life-size constructions made from printed concrete are emerging from the ground. This book presents state-of-the-art knowledge on the different printing processes as well as on the concrete material that must adapt to these new manufacturing techniques, such as new hardware and new printers for concrete. The possibilities in terms of architectural design are discussed as well as the pathways that remain to be uncovered. The book also explores the challenges that researchers and companies expect to overcome as they get closer to democratizing this potential revolution that is the digital manufacturing of concrete.

Download or read book Construction 3D Printing written by Ming Jen Tan and published by Springer Nature. This book was released on with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 3D Printing for Construction in the Transformation of the Building Industry written by Bárbara Rangel and published by CRC Press. This book was released on 2024-11-08 with total page 133 pages. Available in PDF, EPUB and Kindle. Book excerpt: As concrete revolutionised construction in the 20th century, digitalisation is transforming the building industry (BI). Process automation and 3D printing (3DP) are commonplace in the industry and our homes. However, due to BI’s scale and complexity, Additive Manufacturing (AM) is in its native stage. Ongoing scientific research has been providing knowledge that will simplify the integration of 3DCP in the market, exploring its materiality, technologies, and design methodologies. This book provides an overview of the latest research achievements of the design possibilities that 3DP for construction (3DC) can offer in the various fields of construction, particularly architecture and engineering.

Download or read book 3D Materials and Construction Possibilities written by Loretta Waldman and published by Cavendish Square Publishing, LLC. This book was released on 2017-12-15 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most students will work with a plastic when making things with a 3D printer, but that is only scratching the surface of materials that can be used in these machines. This book takes a look at the different materials that can be used by 3D printers, what those materials can make, and the advantages and disadvantages for each.

Download or read book 3D Printing for Construction with Alternative Materials written by Bárbara Rangel and published by Springer Nature. This book was released on 2023-01-01 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the latest achievements and design possibilities that 3D printing for construction (DPC) can offer, the alternative materials to natural aggregates or cement and even the 4th dimension that is already starting in this area. DPC materiality is starting to be explored in architecture as a new design language to reach not only outrageous forms but also to leverage the building process and its performance. Like Corbusier explored the concrete potentiality of concrete to release the façade and the plan, 3DPC is allowing to straighten design freedom with building performance. Industry and Scientific research are offering design professionals possibilities to start a new design movement. New paths are also starting to be tracked to reduce even more this building system footprint, stalking alternatives to Portland cement (PC). Today is already possible to build with the soil from the buildings’ ground. Leftovers from various industries are opening possibilities to decrease the PC and natural aggregates rate in printable mortars. From the industry, salt is becoming a possibility to be used in 3DPC. Sugar can ashes are improving the mortar performance reducing adjuvants. Construction and demolition waste can substitute natural aggregates and even offer new textures and color possibilities. Finally, to close this edition, the latest steps on the use of Phase Change Materials in additive manufacturing are collected to raise awareness to the next step of AM, the 4D printing.

Download or read book Building Information Modeling written by André Borrmann and published by Springer. This book was released on 2018-09-19 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building Information Modeling (BIM) refers to the consistent and continuous use of digital information throughout the entire lifecycle of a built facility, including its design, construction and operation. In order to exploit BIM methods to their full potential, a fundamental grasp of their key principles and applications is essential. Accordingly, this book combines discussions of theoretical foundations with reports from the industry on currently applied best practices. The book’s content is divided into six parts: Part I discusses the technological basics of BIM and addresses computational methods for the geometric and semantic modeling of buildings, as well as methods for process modeling. Next, Part II covers the important aspect of the interoperability of BIM software products and describes in detail the standardized data format Industry Foundation Classes. It presents the different classification systems, discusses the data format CityGML for describing 3D city models and COBie for handing over data to clients, and also provides an overview of BIM programming tools and interfaces. Part III is dedicated to the philosophy, organization and technical implementation of BIM-based collaboration, and discusses the impact on legal issues including construction contracts. In turn, Part IV covers a wide range of BIM use cases in the different lifecycle phases of a built facility, including the use of BIM for design coordination, structural analysis, energy analysis, code compliance checking, quantity take-off, prefabrication, progress monitoring and operation. In Part V, a number of design and construction companies report on the current state of BIM adoption in connection with actual BIM projects, and discuss the approach pursued for the shift toward BIM, including the hurdles taken. Lastly, Part VI summarizes the book’s content and provides an outlook on future developments. The book was written both for professionals using or programming such tools, and for students in Architecture and Construction Engineering programs.

Download or read book Printing Architecture written by Ronald Rael and published by Chronicle Books. This book was released on 2018-05-22 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although 3D printing promises a revolution in many industries, primarily industrial manufacturing, nowhere are the possibilities greater than in the field of product design and modular architecture. Ronald Rael and Virginia San Fratello, of the cutting-edge San Francisco–based design firm Emerging Objects, have developed remarkable techniques for "printing" from a wide variety of powders, including sawdust, clay, cement, rubber, concrete, salt, and even coffee grounds, opening an entire realm of material, phenomenological, and ecological possibilities to designers. In addition to case studies and illustrations of their own work, Rael and San Fratello offer guidance for sourcing alternative materials, specific recipes for mixing compounds, and step-by-step instructions for conducting bench tests and setting parameters for material testing, to help readers to understand the process of developing powder-based materials and their unique qualities.

Download or read book Second RILEM International Conference on Concrete and Digital Fabrication written by Freek P. Bos and published by Springer Nature. This book was released on 2020-07-08 with total page 1209 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers peer-reviewed contributions presented at the 2nd RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete), held online and hosted by the Eindhoven University of Technology, the Netherlands from 6-9 July 2020. Focusing on additive and automated manufacturing technologies for the fabrication of cementitious construction materials, such as 3D concrete printing, powder bed printing, and shotcrete 3D printing, the papers highlight the latest findings in this fast-growing field, addressing topics like mixture design, admixtures, rheology and fresh-state behavior, alternative materials, microstructure, cold joints & interfaces, mechanical performance, reinforcement, structural engineering, durability and sustainability, automation and industrialization.

Download or read book Multimaterial 3D Printing Technology written by Jiquan Yang and published by Academic Press. This book was released on 2021-02-09 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multi-material 3D Printing Technology introduces the first models for complex construction and manufacturing using a multi-material 3D printer. The book also explains the advantages that these innovative models provide at various points of the manufacturing supply chain. Innovations in fields such as medicine and aerospace are seeing 3D printing applied to problems that require the technology to develop beyond its traditional definitions. This groundbreaking book provides broad coverage of the theory behind this emerging technology, and the technical details required for readers to investigate these methods for themselves. In addition to describing new models for application of this technology, this book also systematically summarizes the historical models, materials and relevant technologies that are important in multi-material 3D printing. Introduces the heterogeneous object model for 3D printing Provides case studies of the use of hybrid 3D Printing to create gears and human bone Presents techniques which are easy to realize using commercial 3D printers

Download or read book Proceedings of the 25th International Symposium on Advancement of Construction Management and Real Estate written by Xinhai Lu and published by Springer Nature. This book was released on 2021-10-11 with total page 1524 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings book focuses on innovation, cooperation, and sustainable development in the fields of construction management and real estate. The book provides a detailed analysis and description of the disciplinary frontiers in the field of building management and real estate and how they can be promoted in the context of the epidemic. A wide variety of papers provide a reference value for both scholars and practitioners. The proceedings book is the documentation of “the 25th International Symposium on Advancement of Construction Management and Real Estate” (CRIOCM 2020), which was held at the School of Public Administration, Central China Normal University, Wuhan, China, in 2020.

Download or read book 3D Printing Intellectual Property and Innovation written by Rosa Maria Ballardini and published by Kluwer Law International B.V.. This book was released on 2016-04-24 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D printing (or, more correctly, additive manufacturing) is the general term for those software-driven technologies that create physical objects by successive layering of materials. Due to recent advances in the quality of objects produced and to lower processing costs, the increasing dispersion and availability of these technologies have major implications not only for manufacturers and distributors but also for users and consumers, raising unprecedented challenges for intellectual property protection and enforcement. This is the first and only book to discuss 3D printing technology from a multidisciplinary perspective that encompasses law, economics, engineering, technology, and policy. Originating in a collaborative study spearheaded by the Hanken School of Economics, the Aalto University and the University of Helsinki in Finland and engaging an international consortium of legal, design and production engineering experts, with substantial contributions from industrial partners, the book fully exposes and examines the fundamental questions related to the nexus of intellectual property law, emerging technologies, 3D printing, business innovation, and policy issues. Twenty-five legal, technical, and business experts contribute sixteen peer-reviewed chapters, each focusing on a specific area, that collectively evaluate the tensions created by 3D printing technology in the context of the global economy. The topics covered include: • current and future business models for 3D printing applications; • intellectual property rights in 3D printing; • essential patents and technical standards in additive manufacturing; • patent and bioprinting; • private use and 3D printing; • copyright licences on the user-generated content (UGC) in 3D printing; • copyright implications of 3D scanning; and • non-traditional trademark infringement in the 3D printing context. Specific industrial applications – including aeronautics, automotive industries, construction equipment, toy and jewellery making, medical devices, tissue engineering, and regenerative medicine – are all touched upon in the course of analyses. In a legal context, the central focus is on the technology’s implications for US and European intellectual property law, anchored in a comparison of relevant laws and cases in several legal systems. This work is a matchless resource for patent, copyright, and trademark attorneys and other corporate counsel, innovation economists, industrial designers and engineers, and academics and policymakers concerned with this complex topic.

Download or read book 3D Printing of Concrete written by Arnaud Perrot and published by John Wiley & Sons. This book was released on 2019-04-10 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt: The introduction of digital manufacturing techniques, such as 3D printing applied to concrete material, opens up new perspectives on the way in which buildings are designed. Research on this theme is thriving and there is a high rate of innovation related to concrete. At the same time, the first life-size constructions made from printed concrete are emerging from the ground. This book presents state-of-the-art knowledge on the different printing processes as well as on the concrete material that must adapt to these new manufacturing techniques, such as new hardware and new printers for concrete. The possibilities in terms of architectural design are discussed as well as the pathways that remain to be uncovered. The book also explores the challenges that researchers and companies expect to overcome as they get closer to democratizing this potential revolution that is the digital manufacturing of concrete.

Download or read book Additive Manufacturing for Construction written by Biranchi Panda and published by Emerald Group Publishing. This book was released on 2023-12-08 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing for Construction reveals additive manufacturing technologies for building and construction applications. The book explores on-site and off-site construction techniques, featuring design strategies which will eliminate production difficulties and minimise assembly costs, from both academic and industrial perspectives.

Download or read book 3D Printers written by Oliver Bothmann and published by . This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Provides a detailed explanation of the basics of purchasing and using 3D printers for total beginners."--

Download or read book 3D Printed Houses The Future of Construction or Hype written by StoryBuddiesPlay and published by StoryBuddiesPlay. This book was released on 2024-04-11 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dive into the World of 3D-Printed Homes: A Comprehensive Guide Are you interested in the future of construction? Look no further than 3D-printed houses! This innovative technology is rapidly transforming the way we build homes, offering exciting possibilities for affordability, sustainability, and design customization. This comprehensive guide explores everything you need to know about 3D-printed houses. We'll delve into the printing process, from the materials used to the fascinating technology behind it. We'll also unpack the social impact of 3D-printed housing, exploring its potential to address housing shortages and create more sustainable communities. Here are some key areas we'll cover: The Printing Process Unveiled: We'll shed light on how 3D printing works for house construction, explaining the different materials used and the advantages of this method compared to traditional building techniques. Building a Better Future: We'll explore the social impact of 3D-printed houses, discussing how they can provide affordable housing solutions, improve disaster relief efforts, and promote sustainable construction practices. Customization at Your Fingertips: Discover the exciting potential for personalization in 3D-printed houses. Imagine designing your dream home with unique layouts and features, all made possible by this revolutionary technology. Living in a 3D-Printed Home: We'll take you inside the experience of living in a 3D-printed house. Get a glimpse into the comfort, functionality, and potential benefits of this new way of living. A Look Ahead: The Future of 3D Printing in Housing: We'll explore the cutting-edge advancements on the horizon for 3D-printed houses. Imagine faster printing times, self-guided robotic systems, and houses that can even adapt or "grow" over time. Whether you're a homeowner, architect, or simply curious about the future of construction, this guide provides valuable insights into the world of 3D-printed houses. Join us as we explore the potential of this technology to revolutionize the way we build and live.

Download or read book 3D Concrete Printing Technology written by Tejwant Singh Brar and published by Materials Research Forum LLC. This book was released on 2022-11-05 with total page 95 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents a detailed comparison between traditional construction techniques and 3D printing construction. The comparison focuses on four primary parameters: mechanism, composition, time and cost. The operational details of each technology (cast-in situ, pre-stress, post-tension) are reviewed and comparison criteria for all techniques are formulated. In conclusion, 3D printing seems to be well on its way to transform the whole construction industry. Keywords: 3D Concrete Printing, Cast-in-Situ Technology, Pre-Cast Technology, Pre-Stressed Technology, Post-Tension Technology, 3D-Printable Materials, Extrudability, Buildability, Workability, Open Time, Contact Strength between Layers, Aggregates, Water-Cement Ratio, Rheological and Mechanical Properties of 3D Printable Materials, Reinforcement Strategies, Printability Window, Cost Analysis, Green Concrete, Self-Healing Concrete.