Download or read book Constitutive Models of a Time Dependent Material at Finite Strain Levels written by Toshiya Miyazono and published by . This book was released on 2001 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Viscoelastic Behavior of Rubbery Materials written by C. Michael Roland and published by OUP Oxford. This book was released on 2011-06-30 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: The enormous size of polymer molecules causes their molecular motions to span a broad range of length scales and give rise to viscoelastic behaviour. This rate-dependence of the properties is a predominant characteristic of soft materials (rubbers, biopolymers, lubricants, adhesives, etc.). Improving the performance and developing new applications for soft materials require an understanding of the basic principles of how molecular motions underlie physical properties. This text is intended to provide grounding in fundamental aspects of the dynamic behavior of rubbery materials, adopting a molecular perspective in its treatment to emphasize how microscopic processes are connected to the observed macroscopic behavior. The latest discoveries and advances in the science and technology of rubbery materials are described and critically analyzed.
Download or read book Constitutive Modeling for Inelastic Materials Including Damage and Finite Strain Effects written by J. W. Ju and published by . This book was released on 1986 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Finite Strain Theory for Continuum Elasto Plasticity written by Koichi Hashiguchi and published by John Wiley & Sons. This book was released on 2012-10-09 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive introduction to finite elastoplasticity, addressing various analytical and numerical analyses & including state-of-the-art theories Introduction to Finite Elastoplasticity presents introductory explanations that can be readily understood by readers with only a basic knowledge of elastoplasticity, showing physical backgrounds of concepts in detail and derivation processes of almost all equations. The authors address various analytical and numerical finite strain analyses, including new theories developed in recent years, and explain fundamentals including the push-forward and pull-back operations and the Lie derivatives of tensors. As a foundation to finite strain theory, the authors begin by addressing the advanced mathematical and physical properties of continuum mechanics. They progress to explain a finite elastoplastic constitutive model, discuss numerical issues on stress computation, implement the numerical algorithms for stress computation into large-deformation finite element analysis and illustrate several numerical examples of boundary-value problems. Programs for the stress computation of finite elastoplastic models explained in this book are included in an appendix, and the code can be downloaded from an accompanying website.
Download or read book Constitutive Modeling of Engineering Materials written by Vladimir Buljak and published by Academic Press. This book was released on 2021-02-18 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Constitutive Modeling of Engineering Materials provides an extensive theoretical overview of elastic, plastic, damage, and fracture models, giving readers the foundational knowledge needed to successfully apply them to and solve common engineering material problems. Particular attention is given to inverse analysis, parameter identification, and the numerical implementation of models with the finite element method. Application in practice is discussed in detail, showing examples of working computer programs for simple constitutive behaviors. Examples explore the important components of material modeling which form the building blocks of any complex constitutive behavior. - Addresses complex behaviors in a wide range of materials, from polymers, to metals and shape memory alloys - Covers constitutive models with both small and large deformations - Provides detailed examples of computer implementations for material models
Download or read book Time Dependent Constitutive Behavior and Fracture Failure Processes Volume 3 written by Tom Proulx and published by Springer Science & Business Media. This book was released on 2011-05-10 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: This the third volume of six from the Annual Conference of the Society for Experimental Mechanics, 2010, brings together 56 chapters on Time-Dependent Constitutive Fracture and Failure. It presents early findings from experimental and computational investigations on Time Dependent Materials including contributions on Thermal and Mechanical Characterization, Coupled Experimental and Computational Analysis of Fracture Path Selection, Procedures for Mixed Mode Fracture Testing of Bonded Beams, and Experimental Study of Voids in High Strength Aluminum Alloys.
Download or read book Constitutive Models for Rubber VIII written by Nere Gil-Negrete and published by CRC Press. This book was released on 2013-06-03 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to their unique properties, rubber materials are found in multiple engineering applications such as tires, engine mounts, shock absorbers, flexible joints, seals, etc. Nevertheless, the complex nature of the behavior of such material makes it difficult to accurately model and predict the performance of these units. The challenge to correctly reproduce the observed characteristics of rubber elements necessitates detailed experimental investigations, development of accurate constitutive models, validation of techniques to identify material parameters and efficient numerical methods. Aspects regarding fatigue and damage in elastomers are not to be left aside, as they influence the durability of the products. State-of-the-art technology in terms of constitutive modeling, numerical implementation, damage and fatigue resistance are strongly represented in these Proceedings, along with insights into advanced elastomers to be used in novel applications. Topics included in this volume are: Ageing, Friction and abrasion, Adhesion, Swelling, Continuum mechanical models and numerical implementation, Hyperelasticity, Micro-mechanical approaches, Fracture and fatigue, Mullins effect, Strain induced crystallization, Thermal effects, Reinforcement and vulcanization, Design and applications, Smart elastomers. Constitutive Models for Rubber VIII is of interest not only for undergraduates, postgraduates, academics and researchers in the discipline, but also for all those design and development engineers in the industry.
Download or read book Crystal Plasticity Finite Element Methods written by Franz Roters and published by John Wiley & Sons. This book was released on 2011-08-04 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by the leading experts in computational materials science, this handy reference concisely reviews the most important aspects of plasticity modeling: constitutive laws, phase transformations, texture methods, continuum approaches and damage mechanisms. As a result, it provides the knowledge needed to avoid failures in critical systems udner mechanical load. With its various application examples to micro- and macrostructure mechanics, this is an invaluable resource for mechanical engineers as well as for researchers wanting to improve on this method and extend its outreach.
Download or read book Challenges in Mechanics of Time Dependent Materials Volume 2 written by H. Jerry Qi and published by Springer. This book was released on 2014-07-25 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: Challenges in Mechanics of Time-Dependent Materials, Volume 2: Proceedings of the 2014 Annual Conference on Experimental and Applied Mechanics, the second volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental Mechanics, including papers in the following general technical research areas: Metallic, Polymeric and Composite Materials o Effects of Extreme Environments including Radiation Resistance, Damage, and Aging o Challenges in Time-dependent Behavior Modeling of Low, Moderate and High Strain Rates o Effects of Inhomogeneities on the Time-Dependent Behavior o Time dependent granular materials · Composite, Hybrid and Multifunctional Materials o Challenges in Time-dependent Behavior Modeling Viscoelastoplasticity and Damage o Effects of Interfaces and Interphases on the Time-Dependent Behavior · Mechanics of materials from advanced manufacturing, such as additive manufacturing o Property characterization from AM o Process modeling and simulations of AM o Material design using AM · Time-dependent and Small-scale Effects in Micro/Nano-scale Testing
Download or read book Constitutive Models for Rubber written by Al Dorfmann and published by CRC Press. This book was released on 1999-01-01 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text aims to enable the experience accumulated by engineers and the research community in materials science, continuum mechanics and applied mathematics to be shared. In this way, the design and analysis of rubber components using the Finite Element Method should be enhanced.
Download or read book Constitutive Models for Rubber IX written by Bohdana Marvalova and published by CRC Press. This book was released on 2015-10-22 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: The unique properties of rubber make it ideal for use in a wide variety of engineering applications such as tyres, engine mounts, shock absorbers, flexible joints and seals. Developing diverse elastomeric elements for various structures involves numerical simulations of their performance, which are based on reliable constitutive models of the mater
Download or read book Constitutive Models and Finite Element Formulations for Elastic Plastic Materials at Large Strain Deformations written by Jia Lu and published by . This book was released on 1999 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Challenges in Mechanics of Time Dependent Materials Volume 2 written by Alex Arzoumanidis and published by Springer. This book was released on 2018-08-09 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt: Challenges in Mechanics of Time-Dependent Materials, Volume 2 of the Proceedings of the 2018 SEM Annual Conference& Exposition on Experimental and Applied Mechanics, the second volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental Mechanics, including papers in the following general technical research areas: Characterization Across Length Scales Extreme Environments & Environmental Effects Soft Materials Damage, fatigue and Fracture Inhomogeneities & Interfaces Viscoelasticity Research in Progress
Download or read book Constitutive Modeling of Soils and Rocks written by Pierre-Yves Hicher and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title provides a comprehensive overview of elastoplasticity relating to soil and rocks. Following a general outline of the models of behavior and their internal structure, each chapter develops a different area of this subject relating to the author's particular expertise. The first half of the book concentrates on the elastoplasticity of soft soils and rocks, while the second half examines that of hard soils and rocks.
Download or read book Constitutive Models for Rubber IV written by Per-Erik Austrell and published by Routledge. This book was released on 2017-12-04 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: The unique properties of elastomeric materials offer numerous advantages in many engineering applications. Elastomeric units are used as couplings or mountings between rigid components, for example in shock absorbers, vibration insulators, flexible joints, seals and suspensions, etc. However, the complicated nature of the behaviour of such material makes it difficult to accurately predict the performance of these units using finite element modelling, for example. It is imperative that constitutive models accurately capture relevant aspects of mechanical behaviour. The latest developments concerning constitutive modelling of rubber is collected in these Proceedings. Topics included in this volume are, Hyperelastic models, Strength, fracture & fatigue, Dynamic properties & the Fletcher-Gent effect, Micro-mechanical & statistical approaches, Stress softening, iscoelasticity, Filler reinforcement, and Tyres, fibre & cord reinforced rubber.
Download or read book Modeling of Creep for Structural Analysis written by Konstantin Naumenko and published by Springer Science & Business Media. This book was released on 2007-04-06 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book develops methods to simulate and analyze the time-dependent changes of stress and strain states in engineering structures up to the critical stage of creep rupture. The objective of this book is to review some of the classical and recently proposed approaches to the modeling of creep for structural analysis applications. It also aims to extend the collection of available solutions of creep problems by new, more sophisticated examples.
Download or read book Challenges in Mechanics of Time Dependent Materials and Processes in Conventional and Multifunctional Materials Volume 2 written by Bonnie Antoun and published by Springer Science & Business Media. This book was released on 2012-11-09 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Challenges in Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials, Volume 2 represents one of seven volumes of technical papers presented at the Society for Experimental Mechanics SEM 12th International Congress & Exposition on Experimental and Applied Mechanics, held at Costa Mesa, California, June 11-14, 2012. The full set of proceedings also includes volumes on: Dynamic Behavior of Materials, Imaging Methods for Novel Materials and Challenging Applications, Experimental and Applied Mechanics, 2nd International Symposium on the Mechanics of Biological Systems and Materials 13th International Symposium on MEMS and Nanotechnology and, Composite Materials and the 1st International Symposium on Joining Technologies for Composites.
