Download or read book Constitutive Model and Finite Element Formulation for Isothermal Yield Behavior of Polymeric Materials written by Szu-Min Li and published by . This book was released on 2000 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Constitutive modeling of amorphous thermoplastic polymers with special emphasis on manufacturing processes written by Hempel, Philipp and published by KIT Scientific Publishing. This book was released on 2016-10-26 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the development of constitutive models for the mechanical behavior of amorphous thermoplastic polymers at large strains. A special emphasis lies on the temperature dependency so that the altered material behavior at high temperatures can be considered. To implement the developed constitutive models the software tool AceGen is used by which program code is generated and optimized as well as derivatives are calculated automatically.
Download or read book Constitutive Models and Finite Element Formulations for Elastic Plastic Materials at Large Strain Deformations written by Jia Lu and published by . This book was released on 1999 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2008 with total page 946 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Image Correlation for Shape Motion and Deformation Measurements written by Michael A. Sutton and published by Springer Science & Business Media. This book was released on 2009-04-21 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Image Correlation for Shape, Motion and Deformation Measurements provides a comprehensive overview of data extraction through image analysis. Readers will find and in-depth look into various single- and multi-camera models (2D-DIC and 3D-DIC), two- and three-dimensional computer vision, and volumetric digital image correlation (VDIC). Fundamentals of accurate image matching are described, along with presentations of both new methods for quantitative error estimates in correlation-based motion measurements, and the effect of out-of-plane motion on 2D measurements. Thorough appendices offer descriptions of continuum mechanics formulations, methods for local surface strain estimation and non-linear optimization, as well as terminology in statistics and probability. With equal treatment of computer vision fundamentals and techniques for practical applications, this volume is both a reference for academic and industry-based researchers and engineers, as well as a valuable companion text for appropriate vision-based educational offerings.
Download or read book Constitutive Models and Finite Element Formulations for Elastic Plastic Materials at Large Strain Deformations written by Chia Lu and published by . This book was released on 1999 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hot Embossing written by Matthias Worgull and published by William Andrew. This book was released on 2009-09-28 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an overview of replication technology for micro- and nanostructures, focusing on the techniques and technology of hot embossing, a scaleable and multi-purpose technology for the manufacture of devices such as BioMEMS and microfluidic devices which are expected to revolutionize a wide range of medical and industrial processes over the coming decade.The hot embossing process for replicating microstructures was developed by the Forschungszentrum Karlsruhe (Karlsruhe Institute of Technology) where the author is head of the Nanoreplication Group. Worgull fills a gap in existing information by fully detailing the technology and techniques of hot embossing. He also covers nanoimprinting, a process related to hot embossing, with examples of actual research topics and new applications in nanoreplication. - A practical and theoretical guide to selecting the materials, machinery and processes involved in microreplication using hot embossing techniques - Compares different replication processes such as: micro injection molding, micro thermoforming, micro hot embossing, and nanoimprinting - Details commercially available hot embossing machinery and components like tools and mold inserts
Download or read book Computational Inelasticity written by J.C. Simo and published by Springer Science & Business Media. This book was released on 2006-05-07 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: A description of the theoretical foundations of inelasticity, its numerical formulation and implementation, constituting a representative sample of state-of-the-art methodology currently used in inelastic calculations. Among the numerous topics covered are small deformation plasticity and viscoplasticity, convex optimisation theory, integration algorithms for the constitutive equation of plasticity and viscoplasticity, the variational setting of boundary value problems and discretization by finite element methods. Also addressed are the generalisation of the theory to non-smooth yield surface, mathematical numerical analysis issues of general return mapping algorithms, the generalisation to finite-strain inelasticity theory, objective integration algorithms for rate constitutive equations, the theory of hyperelastic-based plasticity models and small and large deformation viscoelasticity. Of great interest to researchers and graduate students in various branches of engineering, especially civil, aeronautical and mechanical, and applied mathematics.
Download or read book K version of Finite Element Method in 2 D Polymer Flows written by Amanullahkhan Mohammed and published by . This book was released on 2004 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Modeling Optimization and Manufacturing Simulation of Advanced Engineering Materials written by Pablo Andrés Muñoz-Rojas and published by Springer. This book was released on 2016-06-20 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents recent research work focused in the development of adequate theoretical and numerical formulations to describe the behavior of advanced engineering materials. Particular emphasis is devoted to applications in the fields of biological tissues, phase changing and porous materials, polymers and to micro/nano scale modeling. Sensitivity analysis, gradient and non-gradient based optimization procedures are involved in many of the chapters, aiming at the solution of constitutive inverse problems and parameter identification. All these relevant topics are exposed by experienced international and inter institutional research teams resulting in a high level compilation. The book is a valuable research reference for scientists, senior undergraduate and graduate students, as well as for engineers acting in the area of computational material modeling.
Download or read book K version of Finite Element Method in Two dimensional Polymer Flows written by Kedar Mukund Deshpande and published by . This book was released on 2004 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Introduction to the Mechanical Properties of Solid Polymers written by I. M. Ward and published by John Wiley & Sons. This book was released on 2005-08-19 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a comprehensive introduction to the mechanical behaviour of solid polymers. Extensively revised and updated throughout, the second edition now includes new material on mechanical relaxations and anisotropy, composites modelling, non-linear viscoelasticity, yield behaviour and fracture of tough polymers. The accessible approach of the book has been retained with each chapter designed to be self contained and the theory and applications of the subject carefully introduced where appropriate. The latest developments in the field are included alongside worked examples, mathematical appendices and an extensive reference. Fully revised and updated throughout to include all the latest developments in the field Worked examples at the end of the chapter An invaluable resource for students of materials science, chemistry, physics or engineering studying polymer science
Download or read book Introduction to the Explicit Finite Element Method for Nonlinear Transient Dynamics written by Shen R. Wu and published by John Wiley & Sons. This book was released on 2012-07-30 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: A systematic introduction to the theories and formulations of the explicit finite element method As numerical technology continues to grow and evolve with industrial applications, understanding the explicit finite element method has become increasingly important, particularly in the areas of crashworthiness, metal forming, and impact engineering. Introduction to the Explicit Finite Element Method for Nonlinear Transient Dynamics is the first book to address specifically what is now accepted as the most successful numerical tool for nonlinear transient dynamics. The book aids readers in mastering the explicit finite element method and programming code without requiring extensive background knowledge of the general finite element. The authors present topics relating to the variational principle, numerical procedure, mechanical formulation, and fundamental achievements of the convergence theory. In addition, key topics and techniques are provided in four clearly organized sections: • Fundamentals explores a framework of the explicit finite element method for nonlinear transient dynamics and highlights achievements related to the convergence theory • Element Technology discusses four-node, three-node, eight-node, and two-node element theories • Material Models outlines models of plasticity and other nonlinear materials as well as the mechanics model of ductile damage • Contact and Constraint Conditions covers subjects related to three-dimensional surface contact, with examples solved analytically, as well as discussions on kinematic constraint conditions Throughout the book, vivid figures illustrate the ideas and key features of the explicit finite element method. Examples clearly present results, featuring both theoretical assessments and industrial applications. Introduction to the Explicit Finite Element Method for Nonlinear Transient Dynamics is an ideal book for both engineers who require more theoretical discussions and for theoreticians searching for interesting and challenging research topics. The book also serves as an excellent resource for courses on applied mathematics, applied mechanics, and numerical methods at the graduate level.
Download or read book Mechanical Properties of Solid Polymers written by I. M. Ward and published by . This book was released on 1983-06-27 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: A concise, self-contained introduction to solid polymers, the mechanics of their behavior and molecular and structural interpretations. This updated edition provides extended coverage of recent developments in rubber elasticity, relaxation transitions, non-linear viscoelastic behavior, anisotropic mechanical behavior, yield behavior of polymers, breaking phenomena, and other fields.
Download or read book Finite Element Analysis of Composite Materials using AbaqusTM written by Ever J. Barbero and published by CRC Press. This book was released on 2013-04-18 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developed from the author's graduate-level course on advanced mechanics of composite materials, Finite Element Analysis of Composite Materials with Abaqus shows how powerful finite element tools address practical problems in the structural analysis of composites. Unlike other texts, this one takes the theory to a hands-on level by actually solving
Download or read book Implementation of Constitutive Model in FEA for Nonlinear Behavior of Plastics written by JL. Spoormaker and published by . This book was released on 2000 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main elements of implementation into a finite-element analysis (FEA) package of the earlier developed model for nonlinear viscoelastic behavior of plastics are described.
Download or read book American Doctoral Dissertations written by and published by . This book was released on 2000 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt:
