Download or read book Consequences of Atomic Oxygen Interaction With Silicone and Silicone Contamination on Surfaces in Low Earth Orbit written by and published by . This book was released on 1999 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Issues and Effects of Atomic Oxygen Interactions With Silicone Contamination on Spacecraft in Low Earth Orbit written by and published by . This book was released on 2000 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Protection of Materials and Structures From the Space Environment written by Jacob Kleiman and published by Springer Science & Business Media. This book was released on 2012-09-22 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goals of the 10th International Space Conference on “Protection of Materials and Structures from Space Environment” ICPMSE-10J, since its inception in 1992, have been to facilitate exchanges between members of the various engineering and science disciplines involved in the development of space materials, including aspects of LEO, GEO and Deep Space environments, ground-based qualification, and in-flight experiments and lessons learned from operational vehicles that are closely interrelated to disciplines of the atmospheric sciences, solar-terrestrial interactions and space life sciences. The knowledge of environmental conditions on and around the Moon, Mars, Venus and the low Earth orbit as well as other possible candidates for landing such as asteroids have become an important issue, and protecting both hardware and human life from the effects of space environments has taken on a new meaning in light of the increased interest in space travel and colonization of other planets. And while many material experiments have been carried out on the ground and in open space in the last 50 years (LDEF, MEEP, SARE, MISSE, AOP, DSPSE, ESEM, EURECA, HST, MDIM, MIS, MPID, MPAC and SEED), many questions regarding the environmental impact of space on materials remain either poorly understood or unanswered. The coming generations of scientists will have to continue this work and tackle new challenges, continuing to build the level of confidence humans will need to continue the colonization of space. It is hoped that the proceedings of the ICPMSE-10J presented in this book will constitute a small contribution to doing so.
Download or read book Atomic Oxygen Protection of Materials in Low Earth Orbit written by and published by . This book was released on 2002 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Environmental Degradation of Materials written by Myer Kutz and published by William Andrew. This book was released on 2018-06-15 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Environmental Degradation of Materials, Third Edition, explains how to measure, analyze and control environmental degradation for a wide range of industrial materials, including metals, polymers, ceramics, concrete, wood and textiles exposed to environmental factors, such as weather, seawater, and fire. This updated edition divides the material into four new sections, Analysis and Testing, Types of Degradation, Protective Measures and Surface Engineering, then concluding with Case Studies. New chapters include topics on Hydrogen Permeation and Hydrogen Induced Cracking, Weathering of Plastics, the Environmental Degradation of Ceramics and Advanced Materials, Antimicrobial Layers, Coatings, and the Corrosion of Pipes in Drinking Water Systems. Expert contributors to this book provide a wealth of insider knowledge and engineering expertise that complements their explanations and advice. Case Studies from areas such as pipelines, tankers, packaging and chemical processing equipment ensure that the reader understands the practical measures that can be put in place to save money, lives and the environment. Introduces the reader to the effects of environmental degradation on a wide range of materials, including metals, plastics, concrete, wood and textiles Describes the kind of degradation that effects each material and how best to protect it Includes case studies that show how organizations, from small consulting firms, to corporate giants design and manufacture products that are more resistant to environmental effects
Download or read book Ion Beam Treatment of Polymers written by Alexey Kondyurin and published by Newnes. This book was released on 2014-09-25 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ion Beam Treatment of Polymers, Second Edition presents the results of polymer investigations and technique development in the field of polymer modification by high-energy ion beams. It shows how to use ion beam equipment in the polymer industry, as well as how to use it to produce new polymer materials. The authors, scientists and researchers active in the field, provide analysis and data from their work, and give an overview of related work by others. The authors focus on wetting, adhesion, hardness, chemical activity, environmental stability, biocompatibility, new synthesis methods, and space flight construction. The technologies of material modification by a beam of high energy ions have wide applications in different fields, from microelectronics to medicine. Historically, ion beam treatment of polymers had fewer applications due to high costs of ion beam equipment and low costs of polymer materials. The modern development of new pulse sources with a high current density and wide ion beams increase the effectiveness of ion beam technology for polymers. Collates data from many scientists working in polymer chemistry, physics of ion beam implantation, and in development and production of ion beam equipment Covers industrial and scientific applications of ion beam implanted polymers Integrates physical and chemical aspects of the processes in polymers treated by ion beams
Download or read book Rough Surface Scattering and Contamination written by Philip T. Chen and published by . This book was released on 1999 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Interactions of Contamination Products with the Space Environment In Situ Electron Spectroscopy Studies of UV Irradiated Silicones written by and published by . This book was released on 2001 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report results from a contract tasking SOREQ Nuclear Research Center as follows: The contractor shall investigate the exposure of spacecraft materials to a simulated low earth orbit environment. The contractor will expose self-prepared silicon polymer samples to a controlled environment of atomic oxygen and UV radiation in their test facility. After each exposure the contractor will use electron spectroscopy to determine the material degradation. The contractor will be paid $5,000 after receipt and acceptance of an initial test plan and the remaining $10,000 after receipt and acceptance of the final report, due 7 months after starting the effort.
Download or read book Protection of Materials and Structures from the Low Earth Orbit Space Environment written by J. Kleiman and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication presents the proceedings of ICPMSE-3, the third international conference on Protection of Materials and Structures from the Low Earth Orbit Space Environment, held in Toronto April 25-26, 1996. The conference was hosted and organized by Integrity Testing Laboratory Inc, (ITL), and held at the University of Toronto's Institute for Aerospace Studies (UTIAS), where ITL is located. Twenty industrial companies, seven wliversities and eight government agencies from Canada, USA, United Kingdom, France, Israel, Russia, Ukraine and the Netherlands were represented by over 55 participants indicating increasing international co-operation in this critical arena of protection of materials in space. Twenty-five speakers, world experts in their fields, delivered talks on a wide variety of topics on various aspects of material protection in space, Representatives from the Canadian, American, European and Israeli space agencies as well as from leading space research laboratories of major aerospace industries gathered at UTIAS to discuss the latest developments in the field of material and structure protection from the harsh space environment, These proceedings are organized into four sections: a) AONOV and Radiation Effects on Materials and Structures in the Leo Space Environment; b) Interaction of Matter with the LEO Environment; c) Large Scale Coating Process Developments for Protection in LEO; d) Synthesis and Modification of Materials and Surfaces for Protection in LEO, This is the third in our on-going series of bi-annual international space materials conferences wllich began in 1992 in Toronto. Jacob Kleiman, Integrity Testing Laboratory Inc.
Download or read book Material Selection Guidelines to Limit Atomic Oxygen Effects on Spacecraft Surfaces written by D. Dooling and published by . This book was released on 1999 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Determination of Ground Laboratory to In Space Effective Atomic Oxygen Fluence for DC 93 500 Silicone written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-24 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this research was to calibrate the ground-to-space effective atomic oxygen fluence for DC 93-500 silicone in a thermal energy electron cyclotron resonance (ECR) oxygen plasma facility. Silicones, commonly used spacecraft materials, do not chemically erode with atomic oxygen attack like other organic materials but form an oxidized hardened silicate surface layer. Therefore, the effective atomic oxygen fluence in a ground test facility should not be determined based on mass loss measurements, as they are with organic polymers. A technique has been developed at the Glenn Research Center to determine the equivalent amount of atomic oxygen exposure in an ECR ground test facility to produce the same degree of atomic oxygen damage as in space. The approach used was to compare changes in the surface hardness of ground test (ECR) exposed DC 93-500 silicone with DC 93-500 exposed to low Earth orbit (LEO) atomic oxygen as part of a shuttle flight experiment. The ground to in-space effective atomic oxygen fluence correlation was determined based on the fluence in the ECR source that produced the same hardness for the fluence in-space. Nanomechanical hardness versus contact depth measurements were obtained for five ECR exposed DC 93-500 samples (ECR exposed for 18 to 40 hrs, corresponding to Kapton effective fluences of 4.2 x 10(exp 20) to 9.4 x 10(exp 20) atoms/sq cm, respectively) and for space exposed DC 93-500 from the Evaluation of Oxygen Interactions with Materials III (EOIM III) shuttle flight experiment, exposed to LEO atomic oxygen for 2.3 x 10(exp 20) atoms/sq cm. Pristine controls were also evaluated. A ground-to-space correlation value was determined based on correlation values for four contact depths (150, 200, 250, and 300 nm), which represent the near surface depth data. The results indicate that the Kapton effective atomic oxygen fluence in the ECR facility needs to be 2.64 times higher than in LEO to replicate equivalent exposure damage in the g
Download or read book Atomic Oxygen Interaction with Spacecraft Materials written by and published by . This book was released on 1991 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effects of atomic oxygen on boron nitride, silicon nitride, solar cell interconnects used on the Intelsat 6 satellite, organic polymers, and MoS2 and WS2 dry lubricant have been studied in low Earth orbit (LEO) flight experiments and in our ground-based simulation facility at Los Alamos National Laboratory. Both the in-flight and ground-based experiments employed in situ electrical resistance measurements to detect penetration of atomic oxygen through materials and ESCA analysis to measure chemical composition changes. In the presence of atomic oxygen, silver oxidizes to form silver oxide, which has a much higher electrical resistance than pure silver. Permeation of atomic oxygen through BN overcoated on thin silver was observed. No permeation of atomic oxygen through Si3N4 was observed. Test results on the Intelsat 6 satellite interconnects used on its photovoltaic array indicate that more than 60--80% of the original thickness of silver should remain after completion of the proposed Space Shuttle rescue/reboost mission. Gas phase reaction products produced by the interaction of high kinetic energy atomic oxygen (AO) with Kapton were found to be H2, H2O, CO, and CO2 with NO being a possible secondary product. Hydrogen abstraction at high AO kinetic energy is postulated to be the key reaction controlling the erosion rate of Kapton. An Arrhenius-like expression having an activation barrier of 0.4 eV can be fit to the data, which suggests that the rate limiting step in the AO/Kapton reaction mechanism can be overcome by translational energy. Oxidation of MoS2 and WS2 dry lubricants in both ground-based and orbital exposures indicated the formation of MoO3 and WO3 respectively. A protective oxide layer is formed (almost equal to)30 monolayers thick which has a high initial friction coefficient until the layer is worn off.
Download or read book In Space Technology Development written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-07-05 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earlier Shuttle flight experiments have shown atomic oxygen within the orbital environment can interact with many materials to produce surface recession and mass loss and combine catalytically with other constituents to generate visible and infrared glows. In addition to these effects, examinations of returned satellite hardware have shown many spacecraft materials are also susceptible to damage from high velocity impacts with orbital space debris. These effects are of particular concern for large, multi-mission spacecraft, such as Space Station and SDI operational satellites, that will operate in low-Earth orbit (LEO) during the late 1990's. Not only must these spacecraft include materials and exterior coatings that are resistant to atomic oxygen surface interactions, but these materials must also provide adequate protection against erosion and pitting that could result from numerous impacts with small particles (less than 100 microns) of orbital space debris. An overview of these concerns is presented, and activities now underway to develop materials and coatings are outlined that will provide adequate atomic protection for future spacecraft. The report also discusses atomic oxygen and orbital debris flight experiments now under development to expand our limited data base, correlate ground-based measurments with flight results, and develop an orbital debris collision warning system for use by future spacecraft. Visentine, James T. and Potter, Andrew E., Jr. Johnson Space Center ...
Download or read book Atomic Oxygen Interactions with Saturated Hydrocarbon Surfaces written by Donna J. Garton and published by . This book was released on 1997 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Protection of Materials and Structures from Space Environment written by J. Kleiman and published by Springer Science & Business Media. This book was released on 2006-03-09 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication presents the proceedings of ICPMSE-6, the sixth international conference on Protection of Materials and Structures from Space Environment, held in Toronto May 1-3, 2002. The ICPMSE series of meetings became an important part of the LEO space community since it was started in 1991. Since then, the meeting has grown steadily, attracting a large number of engineers, researchers, managers, and scientists from industrial companies, scientific institutions and government agencies in Canada, U. S. A. , Asia, and Europe, thus becoming a true international event. This year’s meeting is gaining even stronger importance with the resumption of the ISS and other space projects in LEO, GEO and Deep Space. To reflect on these activities, the topics in the program have been extended to include protection of materials in GEO and Deep Space. The combination of a broad selection of technical and scientific topics addressed by internationally known speakers with the charm of Toronto and the hospitality of the organizers brings participants back year after year. The conference was hosted and organized by Integrity Testing Laboratory Inc. (ITL), and held at the University of Toronto’s Institute for Aerospace Studies (UTIAS). The meeting was sponsored by the Materials and Manufacturing Ontario (MMO) and the CRESTech, two Ontario Centres of Excellence; Air Force Office of Scientific Research (AFOSR/NL); MD Robotics; EMS Technologies; The Integrity Testing Laboratory (ITL); and the UTIAS.
Download or read book Handbook of Space Engineering Archaeology and Heritage written by Ann Darrin and published by CRC Press. This book was released on 2009-06-26 with total page 1038 pages. Available in PDF, EPUB and Kindle. Book excerpt: Some might think that the 27 thousand tons of material launched by earthlings into outer space is nothing more than floating piles of debris. However, when looking at these artifacts through the eyes of historians and anthropologists, instead of celestial pollution, they are seen as links to human history and heritage.Space: The New Frontier for Ar
Download or read book Atomic Oxygen Effects Measurements for Shuttle Missions STS 8 and 41 G written by and published by . This book was released on 1988 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt:
