Download or read book Consensus on Operating Practices for Control of Water and Steam Chemistry in Combined Cycle and Cogeneration Power Plants written by ASME Research and Technology Committee on Water and Steam in Thermal Power Systems and published by Asme Handbooks & Manuals. This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the Heat Recovery Steam Generator Chemistry Limits Task Group and the Water Technology Subcommittee of the ASME Research and Technology Committee on Water and Steam in Thermal Systems. This publication is an important companion to previously published documents prepared to inform and educate the reader and to develop good chemistry control and operating practices for steam and water usage in thermal systems.
Download or read book Marks Standard Handbook for Mechanical Engineers written by Eugene A. Avallone and published by McGraw Hill Professional. This book was released on 2006-12-07 with total page 1937 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solve any mechanical engineering problem quickly and easily with the world's leading engineering handbook Nearly 1800 pages of mechanical engineering facts, figures, standards, and practices, 2000 illustrations, and 900 tables clarifying important mathematical and engineering principle, and the collective wisdom of 160 experts help you answer any analytical, design, and application question you will ever have.
Download or read book Consensus on Operating Practices for the Sampling and Monitoring of Feedwater and Boiler Water Chemistry in Modern Industrial Boilers written by ASME Press and published by . This book was released on 2006 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication provides recommendations for water chemistry monitoring and is a companion to the ASME "Consensus on Operating Practices for the Control of Feedwater and Boiler Water Chemistry in Modern Industrial Boilers," "A Practical Guide to Avoiding Steam Purity Problems in the Industrial Plant," and "Consensus on Operating Practices for Control of Water and Steam Chemistry in Combined Cycle and Cogeneration Power Plants." These documents provide guidance for avoiding the penalties of severe corrosion or deposition in steam generation systems and end user equipment.
Download or read book Handbook for Cogeneration and Combined Cycle Power Plants written by Meherwan P. Boyce and published by American Society of Mechanical Engineers. This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the aspects of power plant design, operation, and maintenance. This title discusses cycle optimization and reliability, technical details on sizing, plant layout, fuel selection, types of drives, and performance characteristics of the major components in a cogeneration or combined cycle power plant.
Download or read book Marks Standard Handbook for Mechanical Engineers 12th Edition written by Ali M. Sadegh and published by McGraw Hill Professional. This book was released on 2017-11-10 with total page 1536 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 100th Anniversary Edition of the “Bible” for Mechanical Engineers—Fully Revised to Focus on the Core Subjects Critical to the Discipline This 100th Anniversary Edition has been extensively updated to deliver current, authoritative coverage of the topics most critical to today’s Mechanical Engineer. Featuring contributions from more than 160 global experts, Marks’ Standard Handbook for Mechanical Engineers, Twelfth Edition, offers instant access to a wealth of practical information on every essential aspect of mechanical engineering. It provides clear, concise answers to thousands of mechanical engineering questions. You get, accurate data and calculations along with clear explanations of current principles, important codes, standards, and practices. All-new sections cover micro- and nano-engineering, robotic vision, alternative energy production, biological materials, biomechanics, composite materials, engineering ethics, and much more. Coverage includes: • Mechanics of solids and fluids • Heat • Strength of materials • Materials of engineering • Fuels and furnaces • Machine elements • Power generation • Transportation • Fans, pumps, and compressors • Instruments and controls • Refrigeration, cryogenics, and optics • Applied mechanics • Engineering ethics
Download or read book Energy and Power Generation Handbook written by K. R. Rao and published by American Society of Mechanical Engineers. This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers aspects of power generation from all known sources of energy that are in use around the globe. It contains power and energy sources such as solar, wind, hydro, tidal and wave power, bio energy including bio-mass and bio-fuels, waste-material, geothermal, fossil, petroleum, gas and nuclear. Experts were also invited to cover the role of nano-technology and the role of NASA in photovoltaic and wind energy in power generation.
Download or read book Gas Turbine Performance written by Philip P. Walsh and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: A significant addition to the literature on gas turbine technology, the second edition of Gas Turbine Performance is a lengthy text covering product advances and technological developments. Including extensive figures, charts, tables and formulae, this book will interest everyone concerned with gas turbine technology, whether they are designers, marketing staff or users.
Download or read book Chemical Engineering Design written by Gavin Towler and published by Elsevier. This book was released on 2012-01-25 with total page 1321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Design, Second Edition, deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, this edition has been specifically developed for the U.S. market. It provides the latest US codes and standards, including API, ASME and ISA design codes and ANSI standards. It contains new discussions of conceptual plant design, flowsheet development, and revamp design; extended coverage of capital cost estimation, process costing, and economics; and new chapters on equipment selection, reactor design, and solids handling processes. A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data, and Excel spreadsheet calculations, plus over 150 Patent References for downloading from the companion website. Extensive instructor resources, including 1170 lecture slides and a fully worked solutions manual are available to adopting instructors. This text is designed for chemical and biochemical engineering students (senior undergraduate year, plus appropriate for capstone design courses where taken, plus graduates) and lecturers/tutors, and professionals in industry (chemical process, biochemical, pharmaceutical, petrochemical sectors). New to this edition: - Revised organization into Part I: Process Design, and Part II: Plant Design. The broad themes of Part I are flowsheet development, economic analysis, safety and environmental impact and optimization. Part II contains chapters on equipment design and selection that can be used as supplements to a lecture course or as essential references for students or practicing engineers working on design projects. - New discussion of conceptual plant design, flowsheet development and revamp design - Significantly increased coverage of capital cost estimation, process costing and economics - New chapters on equipment selection, reactor design and solids handling processes - New sections on fermentation, adsorption, membrane separations, ion exchange and chromatography - Increased coverage of batch processing, food, pharmaceutical and biological processes - All equipment chapters in Part II revised and updated with current information - Updated throughout for latest US codes and standards, including API, ASME and ISA design codes and ANSI standards - Additional worked examples and homework problems - The most complete and up to date coverage of equipment selection - 108 realistic commercial design projects from diverse industries - A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data and Excel spreadsheet calculations plus over 150 Patent References, for downloading from the companion website - Extensive instructor resources: 1170 lecture slides plus fully worked solutions manual available to adopting instructors
Download or read book Integrated Gasification Combined Cycle IGCC Technologies written by Ting Wang and published by Woodhead Publishing. This book was released on 2016-11-26 with total page 929 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrated Gasification Combined Cycle (IGCC) Technologies discusses this innovative power generation technology that combines modern coal gasification technology with both gas turbine and steam turbine power generation, an important emerging technology which has the potential to significantly improve the efficiencies and emissions of coal power plants. The advantages of this technology over conventional pulverized coal power plants include fuel flexibility, greater efficiencies, and very low pollutant emissions. The book reviews the current status and future developments of key technologies involved in IGCC plants and how they can be integrated to maximize efficiency and reduce the cost of electricity generation in a carbon-constrained world. The first part of this book introduces the principles of IGCC systems and the fuel types for use in IGCC systems. The second part covers syngas production within IGCC systems. The third part looks at syngas cleaning, the separation of CO2 and hydrogen enrichment, with final sections describing the gas turbine combined cycle and presenting several case studies of existing IGCC plants. - Provides an in-depth, multi-contributor overview of integrated gasification combined cycle technologies - Reviews the current status and future developments of key technologies involved in IGCC plants - Provides several case studies of existing IGCC plants around the world
Download or read book Industrial Boilers and Heat Recovery Steam Generators written by V. Ganapathy and published by CRC Press. This book was released on 2002-10-16 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filled with over 225 boiler/HRSG operation and design problems, this book covers steam generators and related systems used in process plants, refineries, chemical plants, electrical utilities, and other industrial settings. Emphasizing the thermal engineering aspects, the author provides information on the design and performance of steam generators
Download or read book Clean and Efficient Coal fired Power Plants written by Heinz Termuehlen and published by American Society of Mechanical Engineers. This book was released on 2003 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the evolution toward advanced coal-fired power plants. Advanced power plants with an efficiency level of 45% are today commercially available and even more efficient plants are in their development phase. Considering that presently many pulverized coal-fired power plants operate with an efficiency of about 32%, an improvement of more than 40% specific coal consumption and CO2 discharge can be achieved. Before trying to apply as a secondary measure the use of carbon sequestration, it seems that this 40% specific CO2 discharge reduction as a primary measure can much easier be achieved. The effect of power generation on the environment can be drastically improved by the use of flue gas cleanup systems in advanced pulverized coal-fired power plants (SO2 emission reduction from 40 to 1.4 lb/MWh and NOx emission reduction from 7.5 to 0.64 lb/MWh). With an increased number of coal-fired plants, CO2 discharge and emissions can be reduced, even with an increase of electric power generation in the US by 38% over the next 20 years. Even though the book concentrates on pulverized coal-fired power plants, it also discusses and compares other options like fluidized-bed combustion and coal gasification.
Download or read book Nitrogen oxides NOx why and how they are controlled written by and published by DIANE Publishing. This book was released on 1999 with total page 57 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fuel Cell Engineering written by and published by Academic Press. This book was released on 2012-08-14 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel cells are attractive electrochemical energy converters featuring potentially very high thermodynamic efficiency factors. The focus of this volume of Advances in Chemical Engineering is on quantitative approaches, particularly based on chemical engineering principles, to analyze, control and optimize the steady state and dynamic behavior of low and high temperature fuel cells (PEMFC, DMFC, SOFC) to be applied in mobile and stationary systems. - Updates and informs the reader on the latest research findings using original reviews - Written by leading industry experts and scholars - Reviews and analyzes developments in the field
Download or read book Beyond the Molecular Frontier written by National Research Council and published by National Academies Press. This book was released on 2003-03-19 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemistry and chemical engineering have changed significantly in the last decade. They have broadened their scopeâ€"into biology, nanotechnology, materials science, computation, and advanced methods of process systems engineering and controlâ€"so much that the programs in most chemistry and chemical engineering departments now barely resemble the classical notion of chemistry. Beyond the Molecular Frontier brings together research, discovery, and invention across the entire spectrum of the chemical sciencesâ€"from fundamental, molecular-level chemistry to large-scale chemical processing technology. This reflects the way the field has evolved, the synergy at universities between research and education in chemistry and chemical engineering, and the way chemists and chemical engineers work together in industry. The astonishing developments in science and engineering during the 20th century have made it possible to dream of new goals that might previously have been considered unthinkable. This book identifies the key opportunities and challenges for the chemical sciences, from basic research to societal needs and from terrorism defense to environmental protection, and it looks at the ways in which chemists and chemical engineers can work together to contribute to an improved future.
Download or read book Small is Profitable written by Amory B. Lovins and published by Routledge. This book was released on 2020-11-27 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today's electricity industry - large power stations feeding a nationwide grid - will soon be a thing of the past. This book explains why and what will replace it - decentralized and distributed electrical resources which can be up to 10 times as economically valuable. The authors - all leading experts in the field - explain very clearly and thoroughly all the benefits, so the engineers will understand the economic advantages and the investors will understand the engineering efficiencies. Here's what industry experts are saying about Small is Profitable... 'A tour-de-force and a goldmine of good ideas. It is going to have a stunning impact on thinking about electricity.' Walter C. Patterson, Senior Research Fellow, Royal Institute of International Affairs, London. 'An amazing undertaking - incredibly ambitious yet magnificently researched and executed.' Dr. Shimon Awerbuch, Senior Advisor, International Energy Agency, Paris. 'Outstanding...You have thought of some [benefits] I never considered...A great resource for the innovation in energy services that will have to take place for us to have a sustainable future.' Dr. Carl Weinberg, Weinberg Associates, former Research Director, PG&E. 'This is a brilliant synthesis and overview with a lot of original analytics and insights and a very important overall theme. I think it is going to have a big impact.' Greg Kats, Principal, Capital E LLC, former Finance Director for Efficiency and Renewable Energy, U.S. Department of Energy. 'E. F. Schumacher would be proud of this rigorous extension of his thesis in Small is Beautiful. It shows how making systems the right size can make them work better and cost less. Here are critical lessons for the new century: technologies tailored to the needs of people, not the reverse, can improve the economy and the environment.' Dr. Daniel Kammen, Professor of Energy and Society and of Public Policy, University of California, Berkeley. 'Small is Profitable creates an unconventional but impeccably reasoned foundation to correctly assign the costs and true benefits of distributed energy systems. It has become an indispensable tool for modelling distributed energy systems benefits for us.' Tom Dinwoodie, CEO and Chairman, PowerLight Corporation. 'A Unique and valuable contribution to the distributed energy industry...Small Is Profitable highlights the societal benefits of distributed resources, and will be a helpful guide to policymakers who wish to properly account for these benefits in the marketplace.' Nicholas Lenssen, Senior Director, Primen. 'This book will shift the electric industry from the hazards of overcentralization toward the new era where distributed generation will rule.' Steven J. Strong, President, Solar Design Associates, Inc. 'Readers will understand why distributed resources are poised to fundamentally alter the electric power system. Its comprehensive review of the benefits of distributed resources [is] an important part of my library.' Dr. Thomas E. Hoff, President, Clean Power Research. 'The most comprehensive treatise on distributed generation.... Great job and congratulations.' Howard Wenger, Principal, Pacific Energy Group '..[D]ensely packed with information and insights...goes a long way to demonstrate that the former paradigm of electric power supply no longer makes sense.' Prof. Richard Hirsh, University of Vermont, Leading historian of the electric power sector. 'Amory Lovins was already the world's most original and influential thinker on the future of energy services in general and electricity systems in particular. This remarkable book is a very worthy addition to an extraordinary legacy.' Ralph Cavanagh, Energy Co-Director, Natural Resources Defense Council. 'This is a book every utility professional should have on the bookshelf.' Dr Peter S. Fox-Penner, Principal and Chairman of the Board, the Brattle Group, former Principal Deputy Assistant Secretary of Energy.
Download or read book Renewable Energy Sources and Climate Change Mitigation written by Ottmar Edenhofer and published by Cambridge University Press. This book was released on 2011-11-21 with total page 1088 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Intergovernmental Panel on Climate Change Special Report (IPCC-SRREN) assesses the potential role of renewable energy in the mitigation of climate change. It covers the six most important renewable energy sources - bioenergy, solar, geothermal, hydropower, ocean and wind energy - as well as their integration into present and future energy systems. It considers the environmental and social consequences associated with the deployment of these technologies, and presents strategies to overcome technical as well as non-technical obstacles to their application and diffusion. SRREN brings a broad spectrum of technology-specific experts together with scientists studying energy systems as a whole. Prepared following strict IPCC procedures, it presents an impartial assessment of the current state of knowledge: it is policy relevant but not policy prescriptive. SRREN is an invaluable assessment of the potential role of renewable energy for the mitigation of climate change for policymakers, the private sector, and academic researchers.
Download or read book Nuclear Energy written by Nicholas Tsoulfanidis and published by Springer Science & Business Media. This book was released on 2012-12-12 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear Energy provides an authoritative reference on all aspects of the nuclear industry from fundamental reactor physics calculations to reactor design, nuclear fuel resources, nuclear fuel cycle, radiation detection and protection, and nuclear power economics. Featuring 19 peer-reviewed entries by recognized authorities in the field, this book provides comprehensive, streamlined coverage of fundamentals, current areas of research, and goals for the future. The chapters will appeal to undergraduate and graduate students, researchers, and energy industry experts.
