EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book Seismic Design of Precast Concrete Building Structures

Download or read book Seismic Design of Precast Concrete Building Structures written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2003-01-01 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this state-of-art report is to present current practices for use of precast and prestressed concrete in countries in seismic regions, to recommend good practice, and to discuss current developments. The report has been drafted by 30 contributors from nine different countries. This state-of-art report covers: state of the practice in various countries; advantages and disadvantages of incorporating precast reinforced and prestressed concrete in construction; lessons learned from previous earthquakes; construction concepts; design approaches; primary lateral load resisting systems (precast and prestressed concrete frame systems and structural walls including dual systems) diaphragms of precast and prestressed concrete floor units; modelling and analytical methods; gravity load resisting systems; foundations; and miscellaneous elements (shells, folded plates, stairs and architectural cladding panels). Design equations are reported where necessary, but the emphasis is on principles. Ordinary cast-in-place reinforced concrete is not considered in this report. This fib state-of-the-art report is intended to assist designers and constructors to provide safe and economical applications of structural precast concrete and at the same time to allow innovation in design and construction to continue. This Bulletin N° 27 was approved as an fib state-of-art report in autumn 2002 byfib Commission 7, Seismic design.

Book Precast concrete buildings in seismic areas

Download or read book Precast concrete buildings in seismic areas written by FIB – Féd. Int. du Béton and published by FIB - Féd. Int. du Béton. This book was released on 2016 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document has a broad scope and is not focussed on design issues. Precast construction under seismic conditions is treated as a whole. The main principles of seismic design of different structural systems, their behavior and their construction techniques are presented through rules, construction steps and sequences, procedures, and details that should lead to precast structures built in seismic areas complying with the fundamental performance requirements of collapse prevention and life safety in major earthquakes and limited damage in more frequent earthquakes. The content of this document is largely limited to conventional precast construction and, although some information is provided on the well-known “PRESSS technology” (jointed ductile dry connections), this latter solution is not treated in detail in this document. The general overview, contained in this document, of alternative structural systems and connection solutions available to achieve desired performance levels, intends to provide engineers, architects, clients, and end-users (in general) with a better appreciation of the wide range of applications that modern precast concrete technology can have in various types of construction from industrial to commercial as well as residential. Lastly, the emphasis on practical aspects, from conceptual design to connection detailing, aims to help engineers to move away from the habit of blindly following prescriptive codes in their design, but instead go back to basic principles, in order to achieve a more robust understanding, and thus control, of the seismic behaviour of the structural system as a whole, as well as of its components and individual connections.

Book Advances in Seismic Performance and Risk Estimation of Precast Concrete Buildings

Download or read book Advances in Seismic Performance and Risk Estimation of Precast Concrete Buildings written by Andrea Belleri and published by Frontiers Media SA. This book was released on 2022-02-09 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Concrete in the Service of Mankind

Download or read book Concrete in the Service of Mankind written by Ravindra Dhir and published by CRC Press. This book was released on 1996-06-13 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third volume of Concrete in the Service of Mankind focuses on appropriate concrete technology. Concrete is ubiquitous and unique, and is found in every developed and developing country. Indeed, there are no alternatives to concrete as a volume construction material for infrastructure. This raises important questions of how concrete should

Book Structural Connections for Precast Concrete Buildings

Download or read book Structural Connections for Precast Concrete Buildings written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2008-01-01 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: Connections are among the most essential parts in precast structures. Their performance relates to the structural limit states, as well as to manufacture of the precast elements and erection and maintenance of the structure itself. Proper design of connections is one major key to a successful prefabrication. The principal aim of fib Bulletin 43 is to encourage good practice in the design of structural connections in precast concrete structures. This is achieved through a good understanding of structural connections as parts of the overall structural system and of basic force transferring mechanisms. The bulletin consists of two parts; the first part concerns general considerations and philosophy in the design of structural connections, and the second part deals with basic force transferring mechanisms within structural connections. The main focus is on the design of structural connections with regard to their structural function in ordinary design situations in the serviceability and ultimate limit states, and in accidental/abnormal design situations, like fire, lack of fit and impact/accidental loads. Other aspects considered include production, handling and site erection of elements, building physics, durability and maintenance. Bulletin 43 applies to structural connections for precast concrete buildings, although the information on basic force transfer mechanisms can also be applicable to other types of prefabricated structures.

Book Seismic Design of Reinforced and Precast Concrete Buildings

Download or read book Seismic Design of Reinforced and Precast Concrete Buildings written by Robert E. Englekirk and published by John Wiley & Sons. This book was released on 2003-03-10 with total page 856 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Presents the basics of seismic-resistant design of concrete structures. * Provides a major focus on the seismic design of precast bracing systems.

Book Design of multi storey precast concrete structures

Download or read book Design of multi storey precast concrete structures written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1986-01-01 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Journal Prestressed Concrete Institute

Download or read book Journal Prestressed Concrete Institute written by Prestressed Concrete Institute and published by . This book was released on 1982 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Precast Concrete Structures

Download or read book Precast Concrete Structures written by Kim S. Elliott and published by CRC Press. This book was released on 2019-08-08 with total page 823 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of Precast Concrete Structures introduces the conceptual design ideas for the prefabrication of concrete structures and presents a number of worked examples that translate designs from BS 8110 to Eurocode EC2, before going into the detail of the design, manufacture, and construction of precast concrete multi-storey buildings. Detailed structural analysis of precast concrete and its use is provided and some details are presented of recent precast skeletal frames of up to forty storeys. The theory is supported by numerous worked examples to Eurocodes and European Product Standards for precast reinforced and prestressed concrete elements, composite construction, joints and connections and frame stability, together with extensive specifications for precast concrete structures. The book is extensively illustrated with over 500 photographs and line drawings.

Book Building Code Requirements for Structural Concrete ACI 318 08 and Commentary

Download or read book Building Code Requirements for Structural Concrete ACI 318 08 and Commentary written by ACI Committee 318 and published by American Concrete Institute. This book was released on 2008 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: The quality and testing of materials used in construction are covered by reference to the appropriate ASTM standard specifications. Welding of reinforcement is covered by reference to the appropriate AWS standard. Uses of the Code include adoption by reference in general building codes, and earlier editions have been widely used in this manner. The Code is written in a format that allows such reference without change to its language. Therefore, background details or suggestions for carrying out the requirements or intent of the Code portion cannot be included. The Commentary is provided for this purpose. Some of the considerations of the committee in developing the Code portion are discussed within the Commentary, with emphasis given to the explanation of new or revised provisions. Much of the research data referenced in preparing the Code is cited for the user desiring to study individual questions in greater detail. Other documents that provide suggestions for carrying out the requirements of the Code are also cited.

Book Displacement based Seismic Design of Reinforced Concrete Buildings

Download or read book Displacement based Seismic Design of Reinforced Concrete Buildings written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2003 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: A brief summary of the history of seismic design as given in chapter 1, indicates that initially design was purely based on strength or force considerations. When the importance of displacement, however, became better appreciated, it was attempted to modify the existing force-based approach in order to include considerations of displacement, rather than to totally reconsider the procedure on a more rational basis. In the last decade, then, several researchers started pointing out this inconsistency, proposing displacement-based approaches for earthquake engineering evaluation and design, with the aim of providing improved reliability in the engineering process by more directly relating computed response and expected structural performance. The main objective of this report is to summarize, critically review and compare the displacement - based approaches proposed in the literature, thus favouring code implementation and practical use of rational and reliable methods. Chapter 2 Seismic performance and design objectives of this report introduces concepts of performance levels, seismic hazard representation, and the coupling of performance and hazard to define performance objectives. In fact, for displacement analysis to be relevant in the context of performance-based design, the structural engineer must select appropriate performance levels and seismic loadings. A critical review of some engineering limit states appropriate to the different performance levels is therefore proposed. In chapter 3 Conceptual basis for displacement-based earthquake resistant design, the fundamental principles associated with displacement of the ground during an earthquake and the effects, in terms of displacement, in the structure, are reviewed. The historical development guides the presentation with a review of general linear and nonlinear structural dynamics principles, general approaches to estimate displacement, for both ground and structure, and finally a general presentation of the means to measure and judge the appropriateness of the displacements of the structure in section. Chapter 4 Approaches and procedures for displacement-based design can be somehow considered the fundamental part of the report, since a critical summary of the displacement - based approaches proposed by different researchers is presented there. Displacement - based design may require specific characterization of the input ground motion, a topic addressed in Chapter 5 Seismic input. In general, various pertinent definitions of input motion for non-code format analysis are included, while peak ground parameters necessary for code base shear equations are only addressed as needed for the definition of motion for analysis. Chapter 6 Displacement capacity of members and systems addresses the fundamental problem of evaluating the inelastic displacement capacity of reinforced concrete members and realistic values of their effective cracked stiffness at yielding, including effects of shear and inclined cracking, anchorage slip, bar buckling and of load cycling. In Chapter 7 Application and evaluation of displacement-based approaches, some of the many different displacement based design procedures briefly introduced in Chapter 4 are applied to various case studies, identifying and discussing the difficulties a designer may encounter when trying to use displacement based design. Results for five different case studies designed in accordance with eight different displacement based design methods are presented. Although in general case studies are considered a useful but marginal part of a state of the art document, in this case it has to be noted that chapter 7 is possibly the most innovative and fundamental part of the whole report. The conclusions of chapter 7 are the fundamental and essential conclusions of the document and allow foreseeing a bright future for displacement - based design approaches. The state-of-art report has been elaborated over a period of 4 years by Task Group 7.2 Displacement-based design and assessment of fib Commission 7Seismic design, a truly international team of experts, representing the expertise and experience of all the important seismic regions of the world. In October 2002 the final draft of the Bulletin was presented to the public during the 1st fibCongress in Osaka. It was also there that it was approved by fib Commission 7Seismic Design.

Book Durable Fiber Reinforced Polymer Connections for Precast Concrete Structures

Download or read book Durable Fiber Reinforced Polymer Connections for Precast Concrete Structures written by Andrew J. Tibbetts and published by . This book was released on 2008 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book International Law Reports Volume 179

Download or read book International Law Reports Volume 179 written by Christopher Greenwood and published by Cambridge University Press. This book was released on 2019-01-10 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Decisions of international courts and arbitrators, as well as judgments of national courts, are fundamental elements of modern public international law. The International Law Reports is the only publication in the world wholly devoted to the regular and systematic reporting in English of such decisions. It is therefore an absolutely essential work of reference. Volume 179 is devoted to the 2016 Partial Award in the Arbitration between Republic of Croatia and the Republic of Slovenia, the 2017 Final Award in the Arbitration between the Republic of Croatia and the Republic of Slovenia and 2017 Opinion 2/15 of the Court of Justice of the European Union concerning the Free Trade Agreement between the European Union and Singapore.