Download or read book KWIC Index of Rock Mechanics Literature written by J P Jenkins and published by Elsevier. This book was released on 2016-06-03 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: KWIC Index of Rock Mechanics Literature, Part 2: 1969-1976 is an index of subjects in rock mechanics. The KWIC (keyword-in-context) index is produced by cyclic permutation of significant words in the title of the publication. The text covers materials in rock mechanics and geomechanics published around the 70s. The book will be of great use to students, researchers, and practitioners of geological sciences.

Download or read book Underground Excavations in Rock written by E.T. Brown and published by CRC Press. This book was released on 1980-06-30 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Underground Excavations in Rock deals with the geotechnical aspects of the design of underground openings for mining and civil engineering processes.

Download or read book Stone written by Erhard M. Winkler and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: As one of the most widely accessible building materials available to man, natural stone has been in extensive use for many centuries. It It is a significant component, and in places the only one, of man-made structures the world over, and its properties, applications, and behavior over long periods of time constitute a story that is almost unbelievably compleX'. Important elements of the story are described and interrelated in this volume. That the eX'posed parts of the earth's crust provide a considerable variety of rock types is evident to any thoughtful observer. To the geologist falls the task of characterizing and eX'plaining this variety, but many other kinds of specialists who are involved in the commercial use of stone also have an essential stake in the matter. From quarryman to mason, from architect to structural engineer, and certainly from purchaser to future observer, there is compelling interest in the nature, appearance, and durability of one stone as compared with another, or of stone as compared with some other material. Small wonder, then, that much has been written on the subject, and that numerous aspects of commercial stone and its properties have appealed to a host of investigators.

Download or read book Rock Mechanics and Engineering Volume 1 written by Xia-Ting Feng and published by CRC Press. This book was released on 2017-03-16 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles is the first volume of the five-volume set Rock Mechanics and Engineering and contains twenty-four chapters from key experts in the following fields: - Discontinuities; - Anisotropy; - Rock Stress; - Geophysics; - Strength Criteria; - Modeling Rock Deformation and Failure. The five-volume set “Comprehensive Rock Engineering”, which was published in 1993, has had an important influence on the development of rock mechanics and rock engineering. Significant and extensive advances and achievements in these fields over the last 20 years now justify the publishing of a comparable, new compilation. Rock Mechanics and Engineering represents a highly prestigious, multi-volume work edited by Professor Xia-Ting Feng, with the editorial advice of Professor John A. Hudson. This new compilation offers an extremely wideranging and comprehensive overview of the state-of-the-art in rock mechanics and rock engineering and is composed of peer-reviewed, dedicated contributions by all the key experts worldwide. Key features of this set are that it provides a systematic, global summary of new developments in rock mechanics and rock engineering practices as well as looking ahead to future developments in the fields. Contributors are worldrenowned experts in the fields of rock mechanics and rock engineering, though younger, talented researchers have also been included. The individual volumes cover an extremely wide array of topics grouped under five overarching themes: Principles (Vol. 1), Laboratory and Field Testing (Vol. 2), Analysis, Modelling and Design (Vol. 3), Excavation, Support and Monitoring (Vol. 4) and Surface and Underground Projects (Vol. 5). This multi-volume work sets a new standard for rock mechanics and engineering compendia and will be the go-to resource for all engineering professionals and academics involved in rock mechanics and engineering for years to come.

Download or read book Rock Mechanics and Engineering written by C. Jaeger and published by Cambridge University Press. This book was released on 1979-06-28 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this second, enlarged edition the author continues to emphasise aspects of rock mechanics. Firm in his belief that there is no better way to study the subject than by the detailed analysis of case histories, Dr Jaeger has incorporated a number of new ones.

Download or read book Rock Mechanics and Engineering Volume 2 written by Xia-Ting Feng and published by CRC Press. This book was released on 2017-07-12 with total page 807 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laboratory and Field Testing is the second volume of the five-volume set Rock Mechanics and Engineering and contains nineteen chapters from key experts in the following fields: - Triaxial or True-triaxial Tests under Condition of Loading and Unloading; - Joint Tests; - Dynamic and Creep Tests; - Physical Modeling Tests; - Field Testing and URLs. The five-volume set “Comprehensive Rock Engineering”, which was published in 1993, has had an important influence on the development of rock mechanics and rock engineering. Significant and extensive advances and achievements in these fields over the last 20 years now justify the publishing of a comparable, new compilation. Rock Mechanics and Engineering represents a highly prestigious, multi-volume work edited by Professor Xia-Ting Feng, with the editorial advice of Professor John A. Hudson. This new compilation offers an extremely wideranging and comprehensive overview of the state-of-the-art in rock mechanics and rock engineering and is composed of peer-reviewed, dedicated contributions by all the key experts worldwide. Key features of this set are that it provides a systematic, global summary of new developments in rock mechanics and rock engineering practices as well as looking ahead to future developments in the fields. Contributors are worldrenowned experts in the fields of rock mechanics and rock engineering, though younger, talented researchers have also been included. The individual volumes cover an extremely wide array of topics grouped under five overarching themes: Principles (Vol. 1), Laboratory and Field Testing (Vol. 2), Analysis, Modelling and Design (Vol. 3), Excavation, Support and Monitoring (Vol. 4) and Surface and Underground Projects (Vol. 5). This multi-volume work sets a new standard for rock mechanics and engineering compendia and will be the go-to resource for all engineering professionals and academics involved in rock mechanics and engineering for years to come.

Download or read book In Situ Tests for the Determination of Rock Mass Shear Strength written by Timothy W. Zeigler and published by . This book was released on 1972 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock shear strength is often determined from in situ tests. Many cases have been reported in the literature describing in situ shear test procedures and test results. The purpose of this report is to summarize this information for guidance in planning and evaluating such tests. The types of tests discussed are: direct shear test, Triaxial or multiaxial test, torsion shear test, and pull-out test. The direct shear test is most widely used, and some 48 case histories of such tests are summarized in Appendixes A through E. The main advantage of the direct shear test is the ability to measure the shear resistance in any desired direction along potentially critical discontinuities. The test is also popular due to its adaptability to field conditions; tests can be conducted in trenches, adits, tunnels, and even calyx drill holes. (Author).

Download or read book Rock Mechanics written by Leopold Müller and published by Springer Science & Business Media. This book was released on 1982-02-01 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Much of the research on fracture of rocks or rock-like materials conducted over the past two decades may be considered as "academic studies" of the general phenomenon of fracture. Yet, the understanding of this phenomenon is fundamental if a material is used in any engineering design, whether the aim is to prevent failure of the structure or to promote it. Fracture theories existing are generally empirical and derived from experimental results of laboratory test with simple boundary conditions. Because of the basic weakness of rock intension and because in general the environmental stresses in rock mechanics are compressive most of these theories consider fracture under compressive stress conditions. The Coulomb-Navier-, the Mohr-, the Griffith and the McClintock and Walsh criteria are typical examples and will be considered in the following. In addition the tendency during the past was in making accurate experiments under conditions of homogeneous stresses. To obtain information about the fracture behaviour with unequal principal stresses systems have to be used which involve inhomogeneous stresses. This case is of particular interest, since in practical rock mechanics we may expect conditions of highly inhomogeneous stresses. However, a consideration of such situations involve additional assumptions like the applicability of the theory of elasticity for calculating the stress field, which may be open to question. A distinction has to be made between fracture initiation and fracture propagation, since a detailed observation of the total fracture process in rock was possible by means of "stiff" and "servo-controlled" loading systems.

Download or read book Stone written by E.M. Winkler and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: As one of the most widely accessible building materials available to man, natural stone has been in extensive use for many centuries. It is a significant component, andin places the only one, of man-made structures the world over, and its properties, applications, and behavior over long periods of time constitute a story that is almost unbelievably complex. Important elements of the story are described and interrelated in this volume. That the exposed parts of the earth's crust provide a considerable variety of rock types is evident to any thoughtful observer. To the geologist falls the task of characterizing and explaining this variety, but many other kinds of specialists who are involved in the commercial use of stone also have an essential stake in the matter. From quarryman to mason, from architect to structural engineer, and certainly from purchaser to future observer, there is compelling interest in the nature, appearance, and durability of one stone as compared with another, or of stone as compared with some other material. Small wonder, then, that much has been written on the subject, and that numerous aspects of commercial stone and its properlies have appealed to a host of investigators. Research in this area also has been an official concern of many organizations, which in the United States include the American Society for Testing and Materials, the National Bureau of Standards, the U. S. Bureau of Mines, the U. S. Geological Survey, and several state agencies.

Download or read book Report of Investigations written by and published by . This book was released on 1987 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Engineered Rock Structures in Mining and Civil Construction written by Raghu N. Singh and published by CRC Press. This book was released on 2006-01-26 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book collates and sifts a vast amount of literature on the design of structures in the mining and construction industries to synthesize a comprehensive text on the subject area. The focus is on the application of theory to practice and the book is richly illustrated with worked out examples. The presentation is lucid and based on the extensive professional, teaching and research experience of the authors. The text seeks to address the key issues of design of 'engineered' structures in or on rock. The book will serve as a standard text for undergraduate courses in mining, civil engineering and engineering geology.

Download or read book Guidelines for Open Pit Slope Design written by John Read and published by CSIRO PUBLISHING. This book was released on 2009-11-09 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: Guidelines for Open Pit Slope Design is a comprehensive account of the open pit slope design process. Created as an outcome of the Large Open Pit (LOP) project, an international research and technology transfer project on rock slope stability in open pit mines, this book provides an up-to-date compendium of knowledge of the slope design processes that should be followed and the tools that are available to aid slope design practitioners. This book links innovative mining geomechanics research into the strength of closely jointed rock masses with the most recent advances in numerical modelling, creating more effective ways for predicting rock slope stability and reliability in open pit mines. It sets out the key elements of slope design, the required levels of effort and the acceptance criteria that are needed to satisfy best practice with respect to pit slope investigation, design, implementation and performance monitoring. Guidelines for Open Pit Slope Design comprises 14 chapters that directly follow the life of mine sequence from project commencement through to closure. It includes: information on gathering all of the field data that is required to create a 3D model of the geotechnical conditions at a mine site; how data is collated and used to design the walls of the open pit; how the design is implemented; up-to-date procedures for wall control and performance assessment, including limits blasting, scaling, slope support and slope monitoring; and how formal risk management procedures can be applied to each stage of the process. This book will assist in meeting stakeholder requirements for pit slopes that are stable, in regards to safety, ore recovery and financial return, for the required life of the mine.

Download or read book Rock Characterisation Modelling and Engineering Design Methods written by Xia-Ting Feng and published by CRC Press. This book was released on 2013-05-17 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Characterisation, Modelling and Engineering Design Methods contains the contributions presented at the 3rd ISRM SINOROCK Symposium (Shanghai, China, 1820 June 2013). The papers contribute to the further development of the overall rock engineering design process through the sequential linkage of the three themes of rock characterisation, model

Download or read book Field Testing and Instrumentation of Rock written by and published by ASTM International. This book was released on 1974 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book written by and published by . This book was released on 1975 with total page 1416 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Acoustic Emission written by R. G. Liptai and published by ASTM International. This book was released on 1972 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Geology for Engineers written by F.G.H. Blyth and published by CRC Press. This book was released on 2017-12-21 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: No engineering structure can be built on the ground or within it without the influence of geology being experienced by the engineer. Yet geology is an ancillary subject to students of engineering and it is therefore essential that their training is supported by a concise, reliable and usable text on geology and its relationship to engineering. In this book all the fundamental aspects of geology are described and explained, but within the limits thought suitable for engineers. It describes the structure of the earth and the operation of its internal processes, together with the geological processes that shape the earth and produce its rocks and soils. It also details the commonly occurring types of rock and soil, and many types of geological structure and geological maps. Care has been taken to focus on the relationship between geology and geomechanics, so emphasis has been placed on the geological processes that bear directly upon the composition, structure and mechanics of soil and rocks, and on the movement of groundwater. The descriptions of geological processes and their products are used as the basis for explaining why it is important to investigate the ground, and to show how the investigations may be conducted at ground level and underground. Specific instruction is provided on the relationship between geology and many common activities undertaken when engineering in rock and soil.