Download or read book Confined Granular Flow in Silos written by Jacek Tejchman and published by Springer Science & Business Media. This book was released on 2013-05-15 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: During confined flow of bulk solids in silos some characteristic phenomena can be created, such as: sudden and significant increase of wall stresses, different flow patterns, formation and propagation of wall and interior shear zones, fluctuation of pressures and, strong autogenous dynamic effects. These phenomena have not been described or explained in detail yet. The main intention of the experimental and theoretical research presented in this book is to explain the above mentioned phenomena in granular bulk solids and to describe them with numerical FE models verified by experimental results.

Download or read book Granular flow of materials in Silos Numerical Results written by G. Rombach and published by . This book was released on 1995 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Selected Papers from the 9th World Congress on Industrial Process Tomography written by Manuchehr Soleimani and published by MDPI. This book was released on 2020-02-21 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial process tomography (IPT) is becoming an important tool for Industry 4.0. It consists of multidimensional sensor technologies and methods that aim to provide unparalleled internal information on industrial processes used in many sectors. This book showcases a selection of papers at the forefront of the latest developments in such technologies.

Download or read book Bifurcation and Degradation of Geomaterials with Engineering Applications written by Euripides Papamichos and published by Springer. This book was released on 2017-04-21 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the scientific contributions to the 11th International Workshop on Bifurcation and Degradation in Geomaterials (IWBDG) held in Limassol-Cyprus, May 21-25, 2017. The IWBDG series have grown in size and scope, since their inception 30 years ago in Germany, covering more and wider areas of geomaterials and geomechanics research including modern trends. The papers cover a wide range of topics including advances in instabilities, localized and diffuse failure, micromechanical, multiscale phenomena, multiphysics modeling and other related topics. This volume gathers a series of manuscript by brilliant international scholars who work on modern recent advances in experimental, theoretical and numerical methods. The theoretical and applied mechanics are linked successfully with engineering applications in traditional and in emerging fields, such as geomechanics for the energy and the environment. The quality of the contributed papers has benefited from the peer review process by expert referees. This book can be used as a useful reference for research students, academics and practicing engineers who are interested in the instability and degradation problems in geomaterials, geomechanics, geotechnical engineering and other related applications.

Download or read book The Material Point Modeling of Granular Flow in a Silo written by Zdzislaw Wiȩckowski and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Granular Flow in a Tall Silo written by Risto Lehtinen and published by . This book was released on 1986 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Multiphase Flow and Heat Transfer in Pebble Bed Reactor Core written by Shengyao Jiang and published by Springer Nature. This book was released on 2020-11-19 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces readers to gas flows and heat transfer in pebble bed reactor cores. It addresses fundamental issues regarding experimental and modeling methods for complex multiphase systems, as well as relevant applications and recent research advances. The numerical methods and experimental measurements/techniques used to solve pebble flows, as well as the content on radiation modeling for high-temperature pebble beds, will be of particular interest. This book is intended for a broad readership, including researchers and practitioners, and is sure to become a key reference resource for students and professionals alike.

Download or read book Proceedings of the 14th International Conference on Vibration Problems written by Evangelos J. Sapountzakis and published by Springer Nature. This book was released on 2020-12-23 with total page 1203 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the select proceedings of the 14th International Conference on Vibration Problems (ICOVP 2019) held in Crete, Greece. The volume brings together contributions from researchers working on vibration related problems in a wide variety of engineering disciplines such as mechanical engineering, wind and earthquake engineering, nuclear engineering, aeronautics, robotics, and transport systems. The focus is on latest developments and cutting-edge methods in wave mechanics and vibrations, and includes theoretical, experimental, as well as applied studies. The range of topics and the up-to-date results covered in this volume make this interesting for students, researchers, and professionals alike.

Download or read book Shear Localization in Granular Bodies with Micro Polar Hypoplasticity written by J. Tejchman and published by Springer Science & Business Media. This book was released on 2008-09-27 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes a numerical investigation of shear localization in granular materials within micro-polar hypoplasticity, which was carried out during my long research stay at the Institute of Soil and Rock Mechanics at Karlsruhe University from 1985 to 1996. I dedicate my book to Prof. Gerd Gudehus from Germany, the former head of the Institute of Rock and Soil Mechanics at Karlsruhe University and the supervisor of my scientific research during my stay in Karlsruhe, who encouraged me to deal with shear localization in granular bodies within micro-polar hypoplasticity. I greatly - preciate his profound knowledge, kind help constructive discussions, and collegial attitude to his co-workers. I am thankful to the both series editors: Prof. Wei Wu from Universität für Bodenkultur in Austria and Prof. Ronaldo Borja from Stanford University in USA for their helpful suggestions with respect to the contents and structure of the book. I am also grateful to Dr. Thomas Ditzinger and Mrs. Heather King from the Springer Publishing Company and SPS data processing team for their help in editing this book. Gdansk, Jacek Tejchman June 2008 Contents 1 Introduction......................................................................... 1 2 Literature Overview on Experiments........................................... 11 3 Theoretical Model.................................................................. 47 3.1 Hypoplastic Constitutive Model............................................. 47 3.2 Calibration of Hypoplastic Material Parameters........................... 60 3.3 Micro-polar Continuum........................................................ 67 3.4 Micro-polar Hypoplastic Constitutive Model.............................. 72 3.5 Finite Element Implementation................................................ 75 4 Finite Element Calculations: Preliminary Results............................

Download or read book Discrete Dynamic Modelling of Granular Flows in Silos written by Michael G. Remias and published by . This book was released on 1998 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis develops and tests a two-dimensional discrete dynamic model for the simulation of granular flows in silos and hoppers. The granular material considered is assumed to be an assembly of viscoelastic discs and the motion of such a particle system is shown to be governed by a set of nonlinear first order ordinary differential equations. This system of equations is then solved numerically using the centered finite difference scheme. Based on the model presented, a computer program has been developed and used to analyse the flow behaviour of granular materials during filling and emptying of a silo. The results show that the discrete dynamic model developed is capable of modelling granular flows in silos, particularly predicting wall pressures and analysing flow blockage.

Download or read book Issues in Materials and Manufacturing Research 2011 Edition written by and published by ScholarlyEditions. This book was released on 2012-01-09 with total page 11119 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Materials and Manufacturing Research: 2011 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Materials and Manufacturing Research. The editors have built Issues in Materials and Manufacturing Research: 2011 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Materials and Manufacturing Research in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Materials and Manufacturing Research: 2011 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.

Download or read book Numerical Investigation of Granular Flow and Dynamic Pressure in Silos written by Yin Wang and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the flow of granular material in silos and the pressure acting on the silo walls have been studied for over a century, many challenges still remain in silo design. In particular, during the discharge process some dynamic phenomena in silos can often be observed to display large, self-induced and dynamic pulsations which may endanger the stability of the silo structure. The aim of this thesis is to study the flow and pressure in silos using numerical modelling and analytical methods, and to further understand the mechanical behaviour of granular material and mechanism of dynamic phenomena during silo discharge. The Finite Element (FE) method can be used to analyse the behaviour of the granular material in silos by considering the material as a continuum. In this thesis, FEM modelling of silo flow was developed using the Arbitrary Lagrangian-Eulerian (ALE) formulation in the Abaqus/Explicit program and the key parameters that affect the predictions of the flow and pressure during discharge were identified. Using the ALE technique, almost the entire silo discharge process can be simulated without mesh distortion problems. The mass flow rate and temporally averaged discharge pressure predicted by the FE model were first investigated in a conical hopper and were found to be in good agreement with those from the most commonly quoted theoretical solutions. The transient dynamic pressure fluctuations during incipient silo discharge were predicted and the causes for these dynamic events have been investigated which led to the conclusion that the stress wave propagation and the moving shear zone phenomena within the bulk solid were responsible for the dominant higher and lower frequencies effects respectively. A one-dimensional dynamic model of granular columns subject to Coulomb wall friction was developed to investigate the propagation of stress waves, focusing on the effect of geometry by examining converging and diverging tapered columns. The analytical solutions of this model are compared to the FE model based on the ALE formulation. This FE model was first validated using the known behaviour for cylindrical columns. In all cases, the stress impulse set off by incipient discharge at the silo outlet grew with the distance travelled up the column, however the rate was shown to depend on the halfangle of the taper. Over a range of small angles, the proposed analytical model was found to accurately predict this behaviour. After the successful application of the ALE technique for a conical hopper, the FE model was extended to simulate the granular flow in a flat-bottomed model silo. The FE predictions were compared with the silo pressure measurements in a model silo (Rotter et al, 2004). Pressure cells mounted along a vertical line on the silo walls were used to measure the pressure distribution in the silo tests using dry sand. The FE model was further extended to simulate the granular flow in a model silo consisting of a cylindrical section with a conical hopper. The prediction was compared with the experimental observations from a model silo (Munch-Andersen et al, 1992), together with the well-known theoretical solutions. Two numerical issues were addressed in some detail: one is the numerical treatment of the abrupt transition between the cylinder section and the conical hopper, the other is the interaction between the granular solid and the silo walls that was modelled using a dynamic friction model. In addition, the dynamic pressure events during discharge were examined and plausible explanations were given. Finally, this thesis deployed a non-coaxial elastoplastic constitutive model to explore the effect of non-coaxiality on silo phenomena. The non-coaxial FE modelling was performed on three problems: a simple shear test under various initial conditions, a steep hopper and a flat-bottomed silo. The results show that non-coaxiality did not influence the prediction of wall pressure during filling and storing, on the other hand, the discharge pressure was predicted to be larger when non-coaxiality is considered.

Download or read book Proceedings of the 7th International Conference on Discrete Element Methods written by Xikui Li and published by Springer. This book was released on 2016-12-01 with total page 1414 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest advances in Discrete Element Methods (DEM) and technology. It is the proceeding of 7th International Conference on DEM which was held at Dalian University of Technology on August 1 - 4, 2016. The subject of this book are the DEM and related computational techniques such as DDA, FEM/DEM, molecular dynamics, SPH, Meshless methods, etc., which are the main computational methods for modeling discontinua. In comparison to continua which have been already studied for a long time, the research of discontinua is relatively new, but increases dramatically in recent years and has already become an important field. This book will benefit researchers and scientists from the academic fields of physics, engineering and applied mathematics, as well as from industry and national laboratories who are interested in the DEM.

Download or read book Materials for Construction and Civil Engineering written by M. Clara Gonçalves and published by Springer. This book was released on 2015-03-03 with total page 938 pages. Available in PDF, EPUB and Kindle. Book excerpt: This expansive volume presents the essential topics related to construction materials composition and their practical application in structures and civil installations. The book's diverse slate of expert authors assemble invaluable case examples and performance data on the most important groups of materials used in construction, highlighting aspects such as nomenclature, the properties, the manufacturing processes, the selection criteria, the products/applications, the life cycle and recyclability, and the normalization. Civil Engineering Materials: Science, Processing, and Design is ideal for practicing architects; civil, construction, and structural engineers, and serves as a comprehensive reference for students of these disciplines. This book also: · Provides a substantial and detailed overview of traditional materials used in structures and civil infrastructure · Discusses properties of natural and synthetic materials in construction and materials' manufacturing processes · Addresses topics important to professionals working with structural materials, such as corrosion, nanomaterials, materials life cycle, not often covered outside of journal literature · Diverse author team presents expect perspective from civil engineering, construction, and architecture · Features a detailed glossary of terms and over 400 illustrations

Download or read book FE simulation of Granular Materials Flow in Silos written by Eva Lahti and published by . This book was released on 1994 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Magmatism in the McMurdo Dry Valleys Antarctica written by Bruce Marsh and published by Cambridge University Press. This book was released on 2023-01-31 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: The mechanisms of magma movement, chemical differentiation and physical development, are derived from the geochemistry of igneous rocks, and from studying exposures of deep magmatic systems that have since solidified and been uplifted and exposed at the Earth's surface. The Ferrar Magmatic System of the McMurdo Dry Valleys in Antarctica provides an unparalleled example of a complete magmatic-volcanic system exposed in unprecedented detail. This book provides a unique and usual three-dimensional detailed examination of this system, providing insight into many magmatic processes normally unobservable, in particular how basaltic magma moves upwards through the crust, how it entrains, carries and deposits loads of crystals from great depths, and how this all contributes to Earth's evolution. Providing an explanation of how magmatic systems operate and how igneous rocks form, this is an invaluable resource ideal for researchers and graduate students in magma physics, igneous petrology, volcanology, and geochemistry.

Download or read book Bifurcations Instabilities and Degradations in Geomaterials written by Richard Wan and published by Springer Science & Business Media. This book was released on 2011-03-16 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geomaterials exhibit complex but rich mechanical behaviour with a variety of failure modes ranging from diffuse to localized deformation depending on stress, density, microstructure, and loading conditions. These failure modes are a result of an instability of material and/or geometric nature that can be studied within the framework of bifurcation theory. Degradation is another related phenomenon arising from cyclic loading, ageing, weathering, chemical attack, and capillary effects, among others. The methodology of analyzing the various types of instabilities is crucial in the adequate modelling and safe design of numerous problems in geomechanics. The present volume contains a sampling of enlarged versions of papers presented at the International Workshop on Bifurcation and Degradations in Geomaterials (IWBDG 2008) held in Lake Louise, Alberta, Canada, May 28-31, 2008. These papers capture the state-of-the-art in the specialized field of geomechanics and contemporary approaches to solving the central issue of failure. Some engineering applications are presented in the areas of energy resource extraction and soil-machine interaction.