Download or read book Configurable Computing written by and published by SPIE-International Society for Optical Engineering. This book was released on 1998 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of papers presented at the IS&T/SPIE Electronic Imaging Symposium includes articles on a variety of relevant issues and topics.
Download or read book Reconfigurable Computing Systems Engineering written by Lev Kirischian and published by CRC Press. This book was released on 2017-12-19 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reconfigurable Computing Systems Engineering: Virtualization of Computing Architecture describes the organization of reconfigurable computing system (RCS) architecture and discusses the pros and cons of different RCS architecture implementations. Providing a solid understanding of RCS technology and where it’s most effective, this book: Details the architecture organization of RCS platforms for application-specific workloads Covers the process of the architectural synthesis of hardware components for system-on-chip (SoC) for the RCS Explores the virtualization of RCS architecture from the system and on-chip levels Presents methodologies for RCS architecture run-time integration according to mode of operation and rapid adaptation to changes of multi-parametric constraints Includes illustrative examples, case studies, homework problems, and references to important literature A solutions manual is available with qualifying course adoption. Reconfigurable Computing Systems Engineering: Virtualization of Computing Architecture offers a complete road map to the synthesis of RCS architecture, exposing hardware design engineers, system architects, and students specializing in designing FPGA-based embedded systems to novel concepts in RCS architecture organization and virtualization.
Download or read book Field Programmable Logic and Applications The Roadmap to Reconfigurable Computing written by Reiner W. Hartenstein and published by Springer. This book was released on 2003-06-29 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the proceedings volume of the 10th International Conference on Field Programmable Logic and its Applications (FPL), held August 27 30, 2000 in Villach, Austria, which covered areas like reconfigurable logic (RL), reconfigurable computing (RC), and its applications, and all other aspects. Its subtitle "The Roadmap to Reconfigurable Computing" reminds us, that we are currently witnessing the runaway of a breakthrough. The annual FPL series is the eldest international conference in the world covering configware and all its aspects. It was founded 1991 at Oxford University (UK) and is 2 years older than its two most important competitors usually taking place at Monterey and Napa. FPL has been held at Oxford, Vienna, Prague, Darmstadt, London, Tallinn, and Glasgow (also see: http://www. fpl. uni kl. de/FPL/). The New Case for Reconfigurable Platforms: Converging Media. Indicated by palmtops, smart mobile phones, many other portables, and consumer electronics, media such as voice, sound, video, TV, wireless, cable, telephone, and Internet continue to converge. This creates new opportunities and even necessities for reconfigurable platform usage. The new converged media require high volume, flexible, multi purpose, multi standard, low power products adaptable to support evolving standards, emerging new standards, field upgrades, bug fixes, and, to meet the needs of a growing number of different kinds of services offered to zillions of individual subscribers preferring different media mixes.
Download or read book Reconfigurable Computing Architectures and Applications written by Koen Bertels and published by Springer Science & Business Media. This book was released on 2006-07-26 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-proceedings of the Second International Workshop on Reconfigurable Computing, ARC 2006, held in Delft, The Netherlands, in March 2006. The 22 revised full papers and 35 revised short papers presented were thoroughly reviewed and selected from 95 submissions. The papers are organized in topical sections on applications, power, image processing, organization and architecture, networks and communication, security, and tools.
Download or read book Introduction to Reconfigurable Computing written by Christophe Bobda and published by Springer Science & Business Media. This book was released on 2007-09-30 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work is a comprehensive study of the field. It provides an entry point to the novice willing to move in the research field reconfigurable computing, FPGA and system on programmable chip design. The book can also be used as teaching reference for a graduate course in computer engineering, or as reference to advance electrical and computer engineers. It provides a very strong theoretical and practical background to the field, from the early Estrin’s machine to the very modern architecture such as embedded logic devices.
Download or read book Reconfigurable Computing Architectures Tools and Applications written by Roger Woods and published by Springer. This book was released on 2008-08-29 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coverage in this proceedings volume includes DNA and string processing applications, reconfigurable computing hardware and systems, image processing, run-time behavior, instruction set extension, as well as random number generation and financial computation.
Download or read book Reconfigurable Computing Architectures Tools and Applications written by Phaophak Sirisuk and published by Springer. This book was released on 2010-03-10 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recon?gurable computing (RC) systems have generated considerable interest in the embedded and high-performance computing communities over the past two decades, with ?eld programmable gate arrays (FPGAs) as the leading techn- ogy at the helm of innovation in this discipline. Achieving orders of magnitude performance and power improvements using FPGAs over traditional microp- cessorsis not uncommon for well-suitedapplications. But even with two decades of research and technological advances, FPGA design still presents a subst- tial challenge and often necessitates hardware design expertise to exploit its true potential. Although the challenges to address the design productivity - sues are steep, the promise and the potential of the RC technology in terms of performance, power, size, and versatility continue to attract application design engineers and RC researchers alike. The International Symposium on Applied Recon?gurable Computing (ARC) aims to bring together researchers and practitioners of RC systems with an emphasis on practical applications and design methodologies of this promising technology. This year’s ARC symposium (The sixth ARC symposium) was held in Bangkok, Thailand during March 17–19, 2010, and attracted papers in three primary focus areas:RC applications, RC architectures, and RC design meth- ologies.
Download or read book Reconfigurable Computing Architectures Tools and Applications written by Pedro C. Diniz and published by Springer. This book was released on 2007-06-04 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the Third International Workshop on Applied Reconfigurable Computing, ARC 2007, held in Mangaratiba, Brazil, in March 2007. The 27 full papers and 10 short papers presented together with a late-comer contribution from ARC 2006 are organized in topical sections on architectures, mapping techniques and tools, arithmetic, and applications.
Download or read book Field Programmable Logic and Applications Reconfigurable Computing Is Going Mainstream written by Manfred Glesner and published by Springer. This book was released on 2003-08-02 with total page 1209 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 12th International Conference on Field-Programmable Logic and Applications, FPL 2002, held in Montpellier, France, in September 2002. The 104 revised regular papers and 27 poster papers presented together with three invited contributions were carefully reviewed and selected from 214 submissions. The papers are organized in topical sections on rapid prototyping, FPGA synthesis, custom computing engines, DSP applications, reconfigurable fabrics, dynamic reconfiguration, routing and placement, power estimation, synthesis issues, communication applications, new technologies, reconfigurable architectures, multimedia applications, FPGA-based arithmetic, reconfigurable processors, testing and fault-tolerance, crypto applications, multitasking, compilation techniques, etc.
Download or read book Language driven Exploration and Implementation of Partially Re configurable ASIPs written by Anupam Chattopadhyay and published by Springer Science & Business Media. This book was released on 2008-12-02 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increasing complexity of modern embedded systems demands system designers to ramp up their design productivity without compromising performance goals. This is promoted by modern Electronic System Level (ESL) techniques. Language-driven Exploration and Implementation of Partially Re-configurable ASIPs addresses an important segment of the ESL area by modeling partially re-configurable processors via high-level Architecture Description Language (ADL). This approach also hints an imminent evolution in the area of re-configurable system design.
Download or read book Dependable Computing Systems written by Hassan B. Diab and published by John Wiley & Sons. This book was released on 2005-10-05 with total page 693 pages. Available in PDF, EPUB and Kindle. Book excerpt: A team of recognized experts leads the way to dependable computing systems With computers and networks pervading every aspect of daily life, there is an ever-growing demand for dependability. In this unique resource, researchers and organizations will find the tools needed to identify and engage state-of-the-art approaches used for the specification, design, and assessment of dependable computer systems. The first part of the book addresses models and paradigms of dependable computing, and the second part deals with enabling technologies and applications. Tough issues in creating dependable computing systems are also tackled, including: * Verification techniques * Model-based evaluation * Adjudication and data fusion * Robust communications primitives * Fault tolerance * Middleware * Grid security * Dependability in IBM mainframes * Embedded software * Real-time systems Each chapter of this contributed work has been authored by a recognized expert. This is an excellent textbook for graduate and advanced undergraduate students in electrical engineering, computer engineering, and computer science, as well as a must-have reference that will help engineers, programmers, and technologists develop systems that are secure and reliable.
Download or read book Embedded Computer Systems Architectures Modeling and Simulation written by Timo D. H?m?l?inen and published by Springer Science & Business Media. This book was released on 2005-07-04 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 5th International Workshop on Systems, Architectures, Modeling, and Simulation, SAMOS 2005, held in Samos, Greece in July 2005. The 49 revised full papers presented were thoroughly reviewed and selected from 114 submissions. The papers are organized in topical sections on reconfigurable system design and implementations, processor architectures, design and simulation, architectures and implementations, system level design, and modeling and simulation.
Download or read book Reconfigurable Computing written by Joao Cardoso and published by Springer Science & Business Media. This book was released on 2011-08-17 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the complexity of modern embedded systems increases, it becomes less practical to design monolithic processing platforms. As a result, reconfigurable computing is being adopted widely for more flexible design. Reconfigurable Computers offer the spatial parallelism and fine-grained customizability of application-specific circuits with the postfabrication programmability of software. To make the most of this unique combination of performance and flexibility, designers need to be aware of both hardware and software issues. FPGA users must think not only about the gates needed to perform a computation but also about the software flow that supports the design process. The goal of this book is to help designers become comfortable with these issues, and thus be able to exploit the vast opportunities possible with reconfigurable logic.
Download or read book Advances in Recent Trends in Communication and Networks written by and published by Allied Publishers. This book was released on 2010 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Computer Engineering Handbook written by Vojin G. Oklobdzija and published by CRC Press. This book was released on 2019-07-05 with total page 1648 pages. Available in PDF, EPUB and Kindle. Book excerpt: After nearly six years as the field's leading reference, the second edition of this award-winning handbook reemerges with completely updated content and a brand new format. The Computer Engineering Handbook, Second Edition is now offered as a set of two carefully focused books that together encompass all aspects of the field. In addition to complete updates throughout the book to reflect the latest issues in low-power design, embedded processors, and new standards, this edition includes a new section on computer memory and storage as well as several new chapters on such topics as semiconductor memory circuits, stream and wireless processors, and nonvolatile memory technologies and applications.
Download or read book Field Programmable Custom Computing Technology Architectures Tools and Applications written by Jeffrey Arnold and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: Field-Programmable Custom Computing Technology: Architectures, Tools, and Applications brings together in one place important contributions and up-to-date research results in this fast-moving area. In seven selected chapters, the book describes the latest advances in architectures, design methods, and applications of field-programmable devices for high-performance reconfigurable systems. The contributors to this work were selected from the leading researchers and practitioners in the field. It will be valuable to anyone working or researching in the field of custom computing technology. It serves as an excellent reference, providing insight into some of the most challenging issues being examined today.
Download or read book Synthesis Techniques and Optimizations for Reconfigurable Systems written by Ryan Kastner and published by Springer Science & Business Media. This book was released on 2003-10-27 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synthesis Techniques and Optimization for Reconfigurable Systems discusses methods used to model reconfigurable applications at the system level, many of which could be incorporated directly into modern compilers. The book also discusses a framework for reconfigurable system synthesis, which bridges the gap between application-level compiler analysis and high-level device synthesis. The development of this framework (discussed in Chapter 5), and the creation of application analysis which further optimize its output (discussed in Chapters 7, 8, and 9), represent over four years of rigorous investigation within UCLA's Embedded and Reconfigurable Laboratory (ERLab) and UCSB's Extensible, Programmable and Reconfigirable Embedded SystemS (ExPRESS) Group. The research of these systems has not yet matured, and we continually strive to develop data and methods, which will extend the collective understanding of reconfigurable system synthesis.