Download or read book Conduction in Carbon Nanotube Networks written by Robert A. Bell and published by Springer. This book was released on 2015-06-13 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis exploits the ability of the linear-scaling quantum mechanical code ONETEP to analyze systems containing many thousands of atoms. By implementing an electron transport capability to the code, it also investigates a range of phenomena associated with electrical conduction by nanotubes and, in particular, the process of transport electrons between tubes. Extensive work has been done on the conductivity of single carbon nanotubes. However, any realistic wire made of nanotubes will consist of a large number of tubes of finite length. The conductance of the resulting wire is expected to be limited by the process of transferring electrons from one tube to another.These quantum mechanical calculations on very large systems have revealed a number of incorrect claims made previously in the literature. Conduction processes that have never before been studied at this level of theory are also investigated.
Download or read book Carbon Nanotube polymer Composites written by Dimitrios Tasis and published by Royal Society of Chemistry. This book was released on 2013 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to summarize the basic chemical aspects for obtaining multifunctional carbon nanotube-based polymer composites, but also to highlight some of the most remarkable advances that occurred in the field during the last recent years.
Download or read book Nanoscale Study of Conduction Through Carbon Nanotube Networks written by and published by . This book was released on 2004 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt: We present local conductance measurements of carbon nanotube networks with nanometer scale resolution and show that there are discrete drops in conductance that correspond to junctions of metallic nanotubes and semiconducting nanotubes. The anomalies of these networks compared to thin films are shown, and a new method of discerning between semiconducting and metallic single-wall carbon nanotubes is demonstrated.
Download or read book Carbon Nanotubes written by Mildred S. Dresselhaus and published by Springer Science & Business Media. This book was released on 2003-07-01 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: After a short introduction and a brief review of the relation between carbon nanotubes, graphite and other forms of carbon, the synthesis techniques and growth mechanisms for carbon nanotubes are described. This is followed by reviews on nanotube electronic structure, electrical, optical, and mechanical properties, nanotube imaging and spectroscopy, and nanotube applications.
Download or read book High Thermal Conductivity Materials written by Subhash L. Shinde and published by Springer Science & Business Media. This book was released on 2006-01-31 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main objective of this book is to cover the basic understanding of thermal conduction mechanisms in various high thermal conductivity materials including diamond, cubic boron nitride, and also the latest material like carbon nanotubes. The book is intended as a good reference book for scientists and engineers involved in addressing thermal management issues in a broad spectrum of industries. Leading researchers from industry and academic institutions who are well known in their areas of expertise have contributed a chapter in the field of their interest.
Download or read book Large Scale Simulations of Conduction in Carbon Nanotube Networks written by Robert Andrew Bell and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Science of Electron Systems written by Takeshi Akasaka and published by Springer. This book was released on 2015-11-05 with total page 765 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the most advanced review available of all aspects of π-electron systems, including novel structures, new synthetic protocols, chemical and physical properties, spectroscopic and computational insights, molecular engineering, device properties and physiological properties. π-Electron systems are ubiquitous in nature. Plants convert light energy into chemical energy by photosynthetic processes, in which chlorophylls and other porphyrinoids play an important role. On the one hand, research to learn about photosynthesis from nature has led to understanding of electron and energy transfer processes and to achieving artificial energy conversion systems inspired by nature. On the other hand, recent advances in organic and inorganic chemistry make it possible to construct novel π-electron systems that had never existed in nature. The authors of this book are from a variety of research fields including organic chemistry, inorganic chemistry, physical chemistry, materials science, and biology, providing a comprehensive overview of π-electron systems for a broad readership. Not only specialists but also graduate students working in π-electron systems will find the book of great interest. Throughout, the diverse potential for future fruitful applications of π-electron systems is revealed to the reader.
Download or read book Nanotube Superfiber Materials written by Kazuhiro Yanagi and published by Elsevier Inc. Chapters. This book was released on 2013-09-16 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: The electronic transport properties of networks of single-walled carbon nanotubes are investigated in this chapter. The ratio of semiconducting to metallic single-walled carbon nanotubes, called the MS ratio, affects the conduction mechanisms in nanotube networks. Several theories about the conduction mechanisms are discussed. The results presented are useful in the design of nanotube networks that are expected to be used in a wide range of applications such as field-effect transistors and conducting films.
Download or read book Fundamentals of Conjugated Polymer Blends Copolymers and Composites written by Parveen Saini and published by John Wiley & Sons. This book was released on 2015-04-30 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since their discovery in 1977, the evolution of conducting polymers has revolutionized modern science and technology. These polymers enjoy a special status in the area of materials science yet they are not as popular among young readers or common people when compared to other materials like metals, paper, plastics, rubber, textiles, ceramics and composites like concrete. Most importantly, much of the available literature in the form of papers, specific review articles and books is targeted either at advanced readers (scientists / technologists / engineers / senior academicians) or for those who are already familiar with the topic (doctoral / postdoctoral scholars). For a beginner or even school / college students, such compilations are bit difficult to access / digest. In fact, they need proper introduction to the topic of conducting polymers including their discovery, preparation, properties, applications and societal impact, using suitable examples and already known principles/knowledge/phenomenon. Further, active participation of readers in terms of "question & answers", "fill-in-the-blanks", "numerical" along with suitable answer key is necessary to maintain the interest and to initiate the "thought process". The readers also need to know about the drawbacks and any hazards of such materials. Therefore, I believe that a comprehensive source on the science / technology of conducting polymers which maintains a link between grass root fundamentals and state-of-the-art R&D is still missing from the open literature.
Download or read book Carbon Nanotubes written by Michael J. O’Connell and published by CRC Press. This book was released on 2018-10-03 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since their discovery more than a decade ago, carbon nanotubes (CNTs) have held scientists and engineers in captive fascination, seated on the verge of enormous breakthroughs in areas such as medicine, electronics, and materials science, to name but a few. Taking a broad look at CNTs and the tools used to study them, Carbon Nanotubes: Properties and Applications comprises the efforts of leading nanotube researchers led by Michael O’Connell, protégé of the late father of nanotechnology, Richard Smalley. Each chapter is a self-contained treatise on various aspects of CNT synthesis, characterization, modification, and applications. The book opens with a general introduction to the basic characteristics and the history of CNTs, followed by discussions on synthesis methods and the growth of “peapod” structures. Coverage then moves to electronic properties and band structures of single-wall nanotubes (SWNTs), magnetic properties, Raman spectroscopy of electronic and chemical behavior, and electromechanical properties and applications in NEMS (nanoelectromechanical systems). Turning to applications, the final sections of the book explore mechanical properties of SWNTs spun into fibers, sidewall functionalization in composites, and using SWNTs as tips for scanning probe microscopes. Taking a fresh look at this burgeoning field, Carbon Nanotubes: Properties and Applications points the way toward making CNTs commercially viable.
Download or read book Computational Analysis of Carbon Nanotube Networks in Multifunctional Polymer Nanocomposites written by Kevin S Maxwell and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes (CNTs) have attracted much attention as reinforcements in polymer composite materials because of their unique mechanical, electrical, and thermal properties. The high electrical conductivity of CNTs is especially promising for use in multifunctional materials. Dispersing a small amount of CNTs in electrically insulating polymers has been shown to increase the conductivity of the material by many orders of magnitude because the high aspect ratio CNTs form percolating networks at very low volume fractions. Additionally, it has been shown that the application of mechanical strain to these nanocomposites results in a change in material resistivity, or piezoresistivity. Many experimental research efforts have focused on optimizing this effect for strain and damage sensing applications, but much is still unknown about the dominant mechanisms affecting piezoresistivity. The objective of this work was to develop a computational model that can predict and investigate the electrical and piezoresistive properties of CNT/polymer composites. The nanocomposites were modeled as random networks of resistors in 2D and 3D in order to understand the mechanisms that affect the percolative, electrical, and piezoresistive performance of different material systems. The model was used extensively to analyze and predict the electrical conductivity of 2D single-walled carbon nanotube thin films and 3D multi-walled carbon nanotube (MWCNT)/polymer nanocomposites. It was found that the contact resistance between individual nanotubes greatly affects the conductivity of 2D films as well as 3D MWCNT/polymer materials. Additionally, it was shown that the electrical conductivity model could be calibrated to experimental results by adjusting the contact resistance alone. The 3D random resistor network model was also used to predict the piezoresistive properties for MWCNT/polymer Nano composites. The dominant mechanisms that cause the piezoresistive effect in these material systems were investigated, and the Poisson's ratio of the composite was found to greatly impact the piezoresistive performance. The predictions indicated that decreasing the Poisson's ratio of the composite leads to higher strain sensitivity, which could have implications for choosing material systems for strain sensor applications. The electronic version of this dissertation is accessible from http://hdl.handle.net/1969.1/151710
Download or read book Carbon Nanotubes written by Mohamed Berber and published by BoD – Books on Demand. This book was released on 2016-07-20 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows the recent advances of the applications of carbon nanotubes (CNTs), in particular, the polymer functionalized carbon nanotubes. It also includes a comprehensive description of carbon nanotubes' preparation, properties, and characterization. Therefore, we have attempted to provide detailed information about the polymer-carbon nanotube composites. With regard to the unique structure and properties of carbon nanotubes, a series of important findings have been reported. The unique properties of carbon nanotubes, including thermal, mechanical, and electrical properties, after polymer functionalization have been documented in detail. This book comprises 18 chapters. The chapters include different applications of polymer functionalization CNTs, e.g. photovoltaic, biomedical, drug delivery, gene delivery, stem cell therapy, thermal therapy, biological detection and imaging, electroanalytical, energy, supercapacitor, and gas sensor applications.
Download or read book Organized Networks of Carbon Nanotubes written by K.R.V. Subramanian and published by CRC Press. This book was released on 2020-03-17 with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, meshes and networks formed out of multiwalled carbon nanotubes are investigated and analyzed, including their use in niche applications such as electro-optic devices, advanced mechanical, thermal and electrical property enhancement, and gene editing. Different properties of multi-walled carbon nanotubes, including random network formation, ordering the meshes and networks by mechanical agitation and application of an external field, using crystallization and cross-linking induced phase separation in homopolymers-CNT composites are discussed with theoretical analysis. The book is aimed at researchers and graduate students in Electrical Engineering; Materials Science and Engineering; Chemical Engineering and Nanotechnology, Electronic circuit design, manufacturing, and characterization.
Download or read book Carbon Nanotubes written by Mohammed Rahman and published by BoD – Books on Demand. This book was released on 2018-04-26 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book Carbon Nanotubes - Recent Progress contains a number of recent researches on synthesis, growth, characterization, development, and potential applications on carbon materials especially CNTs in nanoscale. It is a promising novel research from top to bottom that has received a lot of interest in the last few decades. It covers the advanced topics on the physical, chemical, and potential applications of CNTs. Here, the interesting reports on cutting-edge science and technology related to synthesis, morphology, control, hybridization, and prospective applications of CNTs are concluded. This potentially unique work offers various approaches on the R
Download or read book Carbon nanotube networks and their application in flexible display technology written by Axel Schindler and published by Cuvillier Verlag. This book was released on 2019-12-19 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the use of carbon nanotubes in form of randomly oriented networks in display technology. Carbon nanotubes can behave either like a metal or like a semiconductor and are used in this work as transparent conductive pixel electrodes as well as semiconducting channel in thin-film transistors. Monte-Carlo simulations examine more closely the percolation probabilities of metallic and semiconducting nanotubes. The experimental part covers methods to create stable surfactant suspensions from nanotube powders, simple and cost-effective low temperature deposition processes from liquid phase on glass and flexible plastic substrates and patterning procedures of the created films. Electrical and optical characterization gives insight on their performance. The realization of liquid crystal and OLED displays shows the compatibility of transparent carbon nanotube electrodes with production processes. Results of the semiconductor application are presented on a transistor level. The dependence of the transistor performance on the network density for both, mixed and highly semiconducting nanotubes is discussed.
Download or read book Electrodynamics of Solids written by Martin Dressel and published by Cambridge University Press. This book was released on 2002-01-17 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors of this book present a thorough discussion of the optical properties of solids, with a focus on electron states and their response to electrodynamic fields. A review of the fundamental aspects of the propagation of electromagnetic fields, and their interaction with condensed matter, is given. This is followed by a discussion of the optical properties of metals, semiconductors, and collective states of solids such as superconductors. Theoretical concepts, measurement techniques and experimental results are covered in three interrelated sections. Well-established, mature fields are discussed (for example, classical metals and semiconductors) together with modern topics at the focus of current interest. The substantial reference list included will also prove to be a valuable resource for those interested in the electronic properties of solids. The book is intended for use by advanced undergraduate and graduate students, and researchers active in the fields of condensed matter physics, materials science and optical engineering.
Download or read book Syntheses and Applications of Carbon Nanotubes and Their Composites written by Satoru Suzuki and published by BoD – Books on Demand. This book was released on 2013-05-09 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes are rolled up graphene sheets with a quasi-one-dimensional structure of nanometer-scale diameter. In these last twenty years, carbon nanotubes have attracted much attention from physicists, chemists, material scientists, and electronic device engineers, because of their excellent structural, electronic, optical, chemical and mechanical properties. More recently, demand for innovative industrial applications of carbon nanotubes is increasing. This book covers recent research topics regarding syntheses techniques of carbon nanotubes and nanotube-based composites, and their applications. The chapters in this book will be helpful to many students, engineers and researchers working in the field of carbon nanotubes.
