Download or read book Intrinsically Conducting Polymers An Emerging Technology written by M. Aldissi and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the majority of the papers presented at the NATO Ad vanced Research Workshop (ARW) held in Burlington, Vermont, USA on October 12-15, 1992. This ARW was the first of its kind to address the subject of intrinsically conducting polymers with an emphasis on processing and technological applications. The NATO ARW format was followed in that the subjects addressed here were limited in number but discussed in detail with the attendance being limited to a small number of selected scientists. The ARW brought together lecturers who are leaders in their respective fields from a wide range of NATO and non-NATO countries (a total of 11 countries) with the support of the NATO Scientific Affairs Division and some support from Champlain Cable Corporation. The total number of par ticipants was 33 and the number of presentations was 24. The speakers were chosen based on the topics selected for this workshop and repre sented industry, universities and government laboratories. The field of conducting polymers has grown rapidly during the past few years with important developments in materials processing and fabrica tion that brought about active research programs focusing on the use of these polymers as "smart" materials in technological applications and devices in academic and industrial research laboratories.
Download or read book Applications of Electroactive Polymers written by Bruno Scrosati and published by Springer Science & Business Media. This book was released on 1993-05-31 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electroactive polymers have been the object of increasing academic and industrial interest and in the past ten to fifteen years substantial progress has been achieved in the development and the characterization of this important new class of conducting materials. These materials are usually classified in two large groups, according to the mode of their electric transport. One group includes polymers having transport almost exclusively of the ionic type and they are often called 'polymer electrolytes' or, in a broader way, 'polymer ionics'. The other group includes polymeric materials where the transport mechanism is mainly electronic in nature and which are commonly termed 'conducting polymers'. Ionically conducting polymers or polymer ionics may be typically described as polar macromolecular solids in which one or more of a wide range of salts has been dissolved. The most classic example is the combina tion of poly(ethylene oxide), PEO, and lithium salts, LiX. These PEO-LiX polymer ionics were first described and proposed for applications just over ten years ago. The practical relevance of these new materials was im mediately recognized and in the course of a few years the field expanded tremendously with the involvement of many academic and industrial lab oratories. Following this diversified research activity, the ionic transport mechanism in polymer ionics was soon established and this has led to the development of new host polymers of various types, new salts and advanced polymer architectures which have enabled room temperature conductivity to be raised by several orders of magnitude.
Download or read book Supercapacitors written by Francois Beguin and published by John Wiley & Sons. This book was released on 2013-04-02 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supercapacitors are a relatively new energy storage system that provides higher energy density than dielectric capacitors and higher power density than batteries. They are particularly suited to applications that require energy pulses during short periods of time, e.g., seconds or tens of seconds. They are recommended for automobiles, tramways, buses, cranes, fork-lifts, wind turbines, electricity load leveling in stationary and transportation systems, etc. Despite the technological maturity of supercapacitors, there is a lack of comprehensive literature on the topic. Many high performance materials have been developed and new scientific concepts have been introduced. Taking into account the commercial interest in these systems and the new scientific and technological developments now is the ideal time to publish this book, capturing all this new knowledge. The book starts by giving an introduction to the general principles of electrochemistry, the properties of electrochemical capacitors, and electrochemical characterization techniques. Electrical double layer capacitors and pseudocapacitors are then discussed, followed by the various electrolyte systems. Modelling, manufacture of industrial capacitors, constraints, testing, and reliability as well as applications are also covered. 'Supercapacitors - Materials, Systems, and Applications' is part of the series on Materials for Sustainable Energy and Development edited by Prof. G.Q. Max Lu. The series covers advances in materials science and innovation for renewable energy, clean use of fossil energy, and greenhouse gas mitigation and associated environmental technologies.
Download or read book Conducting Polymers and Polymer Electrolytes written by Judith F. Rubinson and published by . This book was released on 2002 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of conductive polymers is a rapidly growing area in polymer chemistry. Since conductive polymers carry a charge, they are used in a wide variety of applications. This book examines a subset within the area of conductive polymers: the electrochemistry that occurs at the interface between conductive polymers and solutions. Topics include synthesis and characterization as well as applications in artificial muscles, electrocatalysis, sensor design, and corrosion prevention.
Download or read book Polymer Electrolytes written by Tan Winie and published by John Wiley & Sons. This book was released on 2020-02-18 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview of the main characterization techniques of polymer electrolytes and their applications in electrochemical devices Polymer Electrolytes is a comprehensive and up-to-date guide to the characterization and applications of polymer electrolytes. The authors ? noted experts on the topic ? discuss the various characterization methods, including impedance spectroscopy and thermal characterization. The authors also provide information on the myriad applications of polymer electrolytes in electrochemical devices, lithium ion batteries, supercapacitors, solar cells and electrochromic windows. Over the past three decades, researchers have been developing new polymer electrolytes and assessed their application potential in electrochemical and electrical power generation, storage, and conversion systems. As a result, many new polymer electrolytes have been found, characterized, and applied in electrochemical and electrical devices. This important book: -Reviews polymer electrolytes, a key component in electrochemical power sources, and thus benefits scientists in both academia and industry -Provides an interdisciplinary resource spanning electrochemistry, physical chemistry, and energy applications -Contains detailed and comprehensive information on characterization and applications of polymer electrolytes Written for materials scientists, physical chemists, solid state chemists, electrochemists, and chemists in industry professions, Polymer Electrolytes is an essential resource that explores the key characterization techniques of polymer electrolytes and reveals how they are applied in electrochemical devices.
Download or read book Conducting Polymers written by György Inzelt and published by Springer Science & Business Media. This book was released on 2008-04-08 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a systematic survey of the knowledge accumulated in this field in the last thirty years. It includes material on the thermodynamic aspects of the polymers, the theory of the mechanism of charge transport processes, and the chemical and physical properties of these compounds. Also covered are the techniques of characterization, the electrochemical methods of synthesis, and the application of these systems. Inzelt’s book is a must-read for electrochemists and others.
Download or read book Electrodeposition from Ionic Liquids written by Frank Endres and published by John Wiley & Sons. This book was released on 2008-09-08 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the dramatic rise in interest shown in this field over the last few years, this book collates the widespread knowledge into one handy volume. It covers in depth all classes of ionic liquids thus far in existence, with the individual chapters written by internationally recognized experts. The text is written to suit several levels of difficulty, containing information on basic physical chemistry in ionic liquids, a theory on the conductivity as well as plating protocols suited to undergraduate courses. The whole is rounded off with an appendix providing experimental procedures to enable readers to experiment with ionic liquids for themselves.
Download or read book Polymers for Electronic Applications written by J.H. Lai and published by CRC Press. This book was released on 2018-01-18 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: The object of this book is to review and to discuss some important applications of polymers in electronics. The first three chapters discuss the current primary applications of polymers in semiconductor device manufacturing: polymers as resist materials for integrated circuit fabrication, polyimides as electronics packaging materials, and polymers as integrated circuits encapsulates.
Download or read book Aspects on Fundaments and Applications of Conducting Polymers written by Artur Motheo and published by BoD – Books on Demand. This book was released on 2012-01-20 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the establishment of the conductive properties of intrinsic conductive polymers, a huge variety of basic and applied research has been carried out, involving different polymers, copolymers, blends, mixtures and composites. Thus, fundamental understanding of physical and chemical properties of these materials has been sought, while the applied aspects have advanced very rapidly, crossing the boundaries between disciplines. Today, the applications of conducting polymers in various fields such as neuroscience, nanotechnology and green chemistry, are easily found. This development is dynamic and it needs to be updated and hence the motivation for the set of results presented in this book; which provides information about the development of fundamentals, and about some applications of conductive polymers.
Download or read book Polymerized Ionic Liquids written by Ali Eftekhari and published by Royal Society of Chemistry. This book was released on 2017-09-18 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series covers the fundamentals and applications of different smart material systems from renowned international experts.
Download or read book Advances in Lithium Ion Batteries written by Walter van Schalkwijk and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the decade since the introduction of the first commercial lithium-ion battery research and development on virtually every aspect of the chemistry and engineering of these systems has proceeded at unprecedented levels. This book is a snapshot of the state-of-the-art and where the work is going in the near future. The book is intended not only for researchers, but also for engineers and users of lithium-ion batteries which are found in virtually every type of portable electronic product.
Download or read book Electromechanically Active Polymers written by Federico Carpi and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Biopolymer Electrolytes written by Sudhakar Y N and published by Elsevier. This book was released on 2018-06-09 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biopolymer Electrolytes: Fundamentals and Applications in Energy Storage provides the core fundamentals and applications for polyelectrolytes and their properties with a focus on biopolymer electrolytes. Increasing global energy and environmental challenges demand clean and sustainable energy sources to support the modern society. One of the feasible technologies is to use green energy and green materials in devices. Biopolymer electrolytes are one such green material and, hence, have enormous application potential in devices such as electrochemical cells and fuel cells. - Features a stable of case studies throughout the book that underscore key concepts and applications - Provides the core fundamentals and applications for polyelectrolytes and their properties - Weaves the subject of biopolymer electrolytes across a broad range of disciplines, including chemistry, chemical engineering, materials science, environmental science, and pharmaceutical science
Download or read book Biosynthetic Polymers for Medical Applications written by Laura Poole-Warren and published by Elsevier. This book was released on 2015-11-23 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biosynthetic Polymers for Medical Applications provides the latest information on biopolymers, the polymers that have been produced from living organisms and are biodegradable in nature. These advanced materials are becoming increasingly important for medical applications due to their favorable properties, such as degradability and biocompatibility. This important book provides readers with a thorough review of the fundamentals of biosynthetic polymers and their applications. Part One covers the fundamentals of biosynthetic polymers for medical applications, while Part Two explores biosynthetic polymer coatings and surface modification. Subsequent sections discuss biosynthetic polymers for tissue engineering applications and how to conduct polymers for medical applications. - Comprehensively covers all major medical applications of biosynthetic polymers - Provides an overview of non-degradable and biodegradable biosynthetic polymers and their medical uses - Presents a specific focus on coatings and surface modifications, biosynthetic hydrogels, particulate systems for gene and drug delivery, and conjugated conducting polymers
Download or read book PEDOT written by Andreas Elschner and published by CRC Press. This book was released on 2010-11-02 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: While there is information available in handbooks on polythiophene chemistry and physics, until now, few if any books have focused exclusively on the most forwardly developed electrically conductive polymer, Poly (3,4-ethylenedioxythiophene)-otherwise known as PEDOT. This resource provides full chemical, physical, and technical information about this important conducting polymer, discussing basic knowledge and exploring its technical applications. Presented information is based on information generated at universities and through academic research, as well as by industrial scientists, providing a complete picture of the experimental and the practical aspects of this important polymer.
Download or read book Conducting Polymer Nanocomposites for Supercapacitors written by Subhash Kondawar and published by Smithers Rapra. This book was released on 2015-09-11 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supercapacitors have drawn intensive attention owing to their virtues of high power density, long cycle life, short charging time and safe operation for promising applications to resolve problems of limited global energy supply and environmental problems. Supercapacitors are designed to bridge the gap between batteries and capacitors, to form fast charging energy-storage devices of intermediate specific energy. The supercapacitor is an important device in the energy storage and conversion systems, and is used in different applications such as in electric vehicles, uninterruptible power supplies, memory protection of computer electronics and cellular devices.This book serves as a guide in understanding the basics of conducting polymer technology, nanostructurisation of conducting polymers and their composites emerging as a new field of research and development, directed to the creation of new smart materials, especially for supercapacitors.The concepts of supercapacitors are well explained in simple and concise form to avoid the confusion of students and academic professionals. The book has chemical engineering orientation and therefore, professionals from the polymer science field may find this book most suitable for their advanced and applied field of research. It will provide them an opportunity to learn about conducting polymers and nanocomposites, and their production and processing technology for supercapacitors. Although the attention is mainly focused on preparation of conducting polymer based binary and ternary nanocomposites and their electrochemical performances for supercapacitor application, this book will be a valuable reference for scientists, engineers, students and general readers who are interested in the investigation and exploitation of the fascinating new class of conducting polymer nanocomposites.
Download or read book Fuel Cell Systems written by L.J.M.J. Blomen and published by Springer Science & Business Media. This book was released on 1994-01-31 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: In light of recent alarming environmental trends combined with increasing commercial viability of fuel cells, the time is propitious for a book focusing on the systematic aspects of cell plant technology. This multidisciplinary text covers the main types of fuel cells, R&D issues, plant design and construction, and economic factors to provide industrial and academic researchers working in electrical systems design, electrochemistry, and engineering with a unique and comprehensive resource.
