Download or read book Bearing Technology written by Pranav H. Darji and published by BoD – Books on Demand. This book was released on 2017-05-31 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the twenty-first century, bearings are expected to perform better in the form of various operating conditions, that is from low speed to extremely high speed and from low load to huge load applications. The expectations from the field of bearing technology are great. During the recent years, we have been witnessing the development of a new generation of mechanical systems that are highly miniaturized and very sophisticated, yet extremely robust. Technological progress creates increasingly arduous conditions for rolling mechanisms.

Download or read book Vibration based Condition Monitoring written by Robert Bond Randall and published by John Wiley & Sons. This book was released on 2011-03-25 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Without doubt the best modern and up-to-date text on the topic, wirtten by one of the world leading experts in the field. Should be on the desk of any practitioner or researcher involved in the field of Machine Condition Monitoring" Simon Braun, Israel Institute of Technology Explaining complex ideas in an easy to understand way, Vibration-based Condition Monitoring provides a comprehensive survey of the application of vibration analysis to the condition monitoring of machines. Reflecting the natural progression of these systems by presenting the fundamental material and then moving onto detection, diagnosis and prognosis, Randall presents classic and state-of-the-art research results that cover vibration signals from rotating and reciprocating machines; basic signal processing techniques; fault detection; diagnostic techniques, and prognostics. Developed out of notes for a course in machine condition monitoring given by Robert Bond Randall over ten years at the University of New South Wales, Vibration-based Condition Monitoring: Industrial, Aerospace and Automotive Applications is essential reading for graduate and postgraduate students/ researchers in machine condition monitoring and diagnostics as well as condition monitoring practitioners and machine manufacturers who want to include a machine monitoring service with their product. Includes a number of exercises for each chapter, many based on Matlab, to illustrate basic points as well as to facilitate the use of the book as a textbook for courses in the topic. Accompanied by a website www.wiley.com/go/randall housing exercises along with data sets and implementation code in Matlab for some of the methods as well as other pedagogical aids. Authored by an internationally recognised authority in the area of condition monitoring.

Download or read book Signal Analysis written by Alfred Mertins and published by Wiley. This book was released on 1999-03-12 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Signal analysis gives an insight into the properties of signals and stochastic processes by methodology. Linear transforms are integral to the continuing growth of signal processes as they characterize and classify signals. In particular, those transforms that provide time-frequency signal analysis are attracting greater numbers of researchers and are becoming an area of considerable importance. The key characteristic of these transforms, along with a certain time-frequency localization called the wavelet transform and various types of multirate filter banks, is their high computational efficiency. It is this computational efficiently which accounts for their increased application. This book provides a complete overview and introduction to signal analysis. It presents classical and modern signal analysis methods in a sequential structure starting with the background to signal theory. Progressing through the book the author introduces more advanced topics in an easy to understand style. Including recent and emerging topics such as filter banks with perfect reconstruction, time frequency and wavelets. With great accuracy and technical merit, this book makes a useful and original contribution to the current literature.

Download or read book Vibration Monitoring of Induction Motors written by William T. Thomson and published by Cambridge University Press. This book was released on 2020-12-03 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master the art of vibration monitoring of induction motors with this unique guide to on-line condition assessment and fault diagnosis, building on the author's fifty years of investigative expertise. It includes: *Robust techniques for diagnosing of a wide range of common faults, including shaft misalignment and/or soft foot, rolling element bearing faults, sleeve bearing faults, magnetic and vibrational issues, resonance in vertical motor drives, and vibration and acoustic noise from inverters. *Detailed technical coverage of thirty real-world industrial case studies, from initial vibration spectrum analysis through to fault diagnosis and final strip-down. *An introduction to real-world vibration spectrum analysis for fault diagnosis, and practical guidelines to reduce bearing failure through effective grease management. This definitive book is essential reading for industrial end-users, engineers, and technicians working in motor design, manufacturing, and condition monitoring. It will also be of interest to researchers and graduate students working on condition monitoring.

Download or read book Vibrations in Rotating Machinery written by IMechE (Institution of Mechanical Engineers) and published by John Wiley & Sons. This book was released on 2004-10-22 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: This essential text contains the papers from the 8th international IMechE conference on Vibrations in Rotating Machinery held at the University of Wales, Swansea in September 2004. The themes of the volume are new developments and industrial applications of current technology relevant to the vibration and noise of rotating machines and assemblies. TOPICS INCLUDE Rotor balancing – including active and automatic balancing Special rotating machines – including micromachines Oil film bearings and dampers Active control methods for rotating machines Smart machine technology Dynamics of assembled rotors Component life predictions and life extension strategies The dynamics of geared systems Cracked rotors – detection, location ad prognosis Chaotic behaviour in machines Experimental methods and discoveries.

Download or read book Proceedings of International Conference on Intelligent Manufacturing and Automation written by Hari Vasudevan and published by Springer. This book was released on 2018-11-04 with total page 697 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the outcomes of the International Conference on Intelligent Manufacturing and Automation (ICIMA 2018) organized by the Departments of Mechanical Engineering and Production Engineering at Dwarkadas J. Sanghvi College of Engineering, Mumbai, and the Indian Society of Manufacturing Engineers. It includes original research and the latest advances in the field, focusing on automation, mechatronics and robotics; CAD/CAM/CAE/CIM/FMS in manufacturing; product design and development; DFM/DFA/FMEA; MEMS and Nanotechnology; rapid prototyping; computational techniques; industrial engineering; manufacturing process management; modelling and optimization techniques; CRM, MRP and ERP; green, lean, agile and sustainable manufacturing; logistics and supply chain management; quality assurance and environment protection; advanced material processing and characterization; and composite and smart materials.

Download or read book Fundamentals of Noise and Vibration Analysis for Engineers written by M. P. Norton and published by Cambridge University Press. This book was released on 2003-10-16 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: Noise and Vibration affects all kinds of engineering structures, and is fast becoming an integral part of engineering courses at universities and colleges around the world. In this second edition, Michael Norton's classic text has been extensively updated to take into account recent developments in the field. Much of the new material has been provided by Denis Karczub, who joins Michael as second author for this edition. This book treats both noise and vibration in a single volume, with particular emphasis on wave-mode duality and interactions between sound waves and solid structures. There are numerous case studies, test cases, and examples for students to work through. The book is primarily intended as a textbook for senior level undergraduate and graduate courses, but is also a valuable reference for researchers and professionals looking to gain an overview of the field.

Download or read book Condition Monitoring with Vibration Signals written by Hosameldin Ahmed and published by John Wiley & Sons. This book was released on 2020-01-07 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an extensive, up-to-date treatment of techniques used for machine condition monitoring Clear and concise throughout, this accessible book is the first to be wholly devoted to the field of condition monitoring for rotating machines using vibration signals. It covers various feature extraction, feature selection, and classification methods as well as their applications to machine vibration datasets. It also presents new methods including machine learning and compressive sampling, which help to improve safety, reliability, and performance. Condition Monitoring with Vibration Signals: Compressive Sampling and Learning Algorithms for Rotating Machines starts by introducing readers to Vibration Analysis Techniques and Machine Condition Monitoring (MCM). It then offers readers sections covering: Rotating Machine Condition Monitoring using Learning Algorithms; Classification Algorithms; and New Fault Diagnosis Frameworks designed for MCM. Readers will learn signal processing in the time-frequency domain, methods for linear subspace learning, and the basic principles of the learning method Artificial Neural Network (ANN). They will also discover recent trends of deep learning in the field of machine condition monitoring, new feature learning frameworks based on compressive sampling, subspace learning techniques for machine condition monitoring, and much more. Covers the fundamental as well as the state-of-the-art approaches to machine condition monitoringguiding readers from the basics of rotating machines to the generation of knowledge using vibration signals Provides new methods, including machine learning and compressive sampling, which offer significant improvements in accuracy with reduced computational costs Features learning algorithms that can be used for fault diagnosis and prognosis Includes previously and recently developed dimensionality reduction techniques and classification algorithms Condition Monitoring with Vibration Signals: Compressive Sampling and Learning Algorithms for Rotating Machines is an excellent book for research students, postgraduate students, industrial practitioners, and researchers.

Download or read book Condition Monitoring and Control for Intelligent Manufacturing written by Lihui Wang and published by Springer Science & Business Media. This book was released on 2006-08-02 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: Condition modelling and control is a technique used to enable decision-making in manufacturing processes of interest to researchers and practising engineering. Condition Monitoring and Control for Intelligent Manufacturing will be bought by researchers and graduate students in manufacturing and control and engineering, as well as practising engineers in industries such as automotive and packaging manufacturing.

Download or read book Introduction to Adaptive Filters written by Simon S. Haykin and published by . This book was released on 1984 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the 6th National Symposium on Rotor Dynamics written by J. S. Rao and published by Springer Nature. This book was released on 2020-10-13 with total page 591 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select papers presented during the 6th National Symposium on Rotor Dynamics, held at CSIR-NAL, Bangalore, and focuses on the latest trends in rotor dynamics and various challenges encountered in the design of rotating machinery. The book is of interest to researchers from mechanical, aerospace, tribology and power industries, engineering service providers and academics.

Download or read book An Introduction to Predictive Maintenance written by R. Keith Mobley and published by Elsevier. This book was released on 2002-10-24 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of An Introduction to Predictive Maintenance helps plant, process, maintenance and reliability managers and engineers to develop and implement a comprehensive maintenance management program, providing proven strategies for regularly monitoring critical process equipment and systems, predicting machine failures, and scheduling maintenance accordingly. Since the publication of the first edition in 1990, there have been many changes in both technology and methodology, including financial implications, the role of a maintenance organization, predictive maintenance techniques, various analyses, and maintenance of the program itself. This revision includes a complete update of the applicable chapters from the first edition as well as six additional chapters outlining the most recent information available. Having already been implemented and maintained successfully in hundreds of manufacturing and process plants worldwide, the practices detailed in this second edition of An Introduction to Predictive Maintenance will save plants and corporations, as well as U.S. industry as a whole, billions of dollars by minimizing unexpected equipment failures and its resultant high maintenance cost while increasing productivity. - A comprehensive introduction to a system of monitoring critical industrial equipment - Optimize the availability of process machinery and greatly reduce the cost of maintenance - Provides the means to improve product quality, productivity and profitability of manufacturing and production plants

Download or read book Condition Monitoring Algorithms in MATLAB written by Adam Jablonski and published by Springer Nature. This book was released on 2021-01-20 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers the first comprehensive and practice-oriented guide to condition monitoring algorithms in MATLAB®. After a concise introduction to vibration theory and signal processing techniques, the attention is moved to the algorithms. Each signal processing algorithm is presented in depth, from the theory to the application, and including extensive explanations on how to use the corresponding toolbox in MATLAB®. In turn, the book introduces various techniques for synthetic signals generation, as well as vibration-based analysis techniques for large data sets. A practical guide on how to directly access data from industrial condition monitoring systems (CMS) using MATLAB® .NET Libraries is also included. Bridging between research and practice, this book offers an extensive guide on condition monitoring algorithms to both scholars and professionals. “Condition Monitoring Algorithms in MATLAB® is a great resource for anyone in the field of condition monitoring. It is a unique as it presents the theory, and a number of examples in Matlab®, which greatly improve the learning experience. It offers numerous examples of coding styles in Matlab, thus supporting graduate students and professionals writing their own codes." Dr. Eric Bechhoefer Founder and CEO of GPMS Developer of the Foresight MX Health and Usage Monitoring System

Download or read book Adaptive Filtering and Change Detection written by Fredrik Gustafsson and published by John Wiley & Sons. This book was released on 2000-10-03 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adaptive filtering is a branch of digital signal processing which enables the selective enhancement of desired elements of a signal and the reduction of undesired elements. Change detection is another kind of adaptive filtering for non-stationary signals, and is the basic tool in fault detection and diagnosis. This text takes the unique approach that change detection is a natural extension of adaptive filtering, and the broad coverage encompasses both the mathematical tools needed for adaptive filtering and change detection and the applications of the technology. Real engineering applications covered include aircraft, automotive, communication systems, signal processing and automatic control problems. The unique integration of both theory and practical applications makes this book a valuable resource combining information otherwise only available in separate sources Comprehensive coverage includes many examples and case studies to illustrate the ideas and show what can be achieved Uniquely integrates applications to airborne, automotive and communications systems with the essential mathematical tools Accompanying Matlab toolbox available on the web illustrating the main ideas and enabling the reader to do simulations using all the figures and numerical examples featured This text would prove to be an essential reference for postgraduates and researchers studying digital signal processing as well as practising digital signal processing engineers.

Download or read book Condition Monitoring of Machinery in Non Stationary Operations written by Tahar Fakhfakh and published by Springer Science & Business Media. This book was released on 2012-03-19 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt: Condition monitoring of machines in non-stationary operations (CMMNO) can be seen as the major challenge for research in the field of machinery diagnostics. Condition monitoring of machines in non-stationary operations is the title of the presented book and the title of the Conference held in Hammamet - Tunisia March 26 – 28, 2012. It is the second conference under this title, first took place in Wroclaw - Poland , March 2011. The subject CMMNO comes directly from industry needs and observation of real objects. Most monitored and diagnosed objects used in industry works in non-stationary operations condition. The non-stationary operations come from fulfillment of machinery tasks, for which they are designed for. All machinery used in different kind of mines, transport systems, vehicles like: cars, buses etc, helicopters, ships and battleships and so on work in non-stationary operations. The papers included in the book are shaped by the organizing board of the conference and authors of the papers. The papers are divided into five sections, namely: Condition monitoring of machines in non-stationary operations Modeling of dynamics and fault in systems Signal processing and Pattern recognition Monitoring and diagnostic systems Noise and vibration of machines The presented book gives the back ground to the main objective of the CMMNO 2012 conference that is to bring together scientific community to discuss the major advances in the field of machinery condition monitoring in non-stationary conditions.

Download or read book Electrical Systems 2 written by Abdenour Soualhi and published by John Wiley & Sons. This book was released on 2020-04-14 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: Methods of diagnosis and prognosis play a key role in the reliability and safety of industrial systems. Failure diagnosis requires the use of suitable sensors, which provide signals that are processed to monitor features (health indicators) for defects. These features are required to distinguish between operating states, in order to inform the operator of the severity level, or even the type, of a failure. Prognosis is defined as the estimation of a systems lifespan, including how long remains and how long has passed. It also encompasses the prediction of impending failures. This is a challenge that many researchers are currently trying to address. Electrical Systems, a book in two volumes, informs readers of the theoretical solutions to this problem, and the results obtained in several laboratories in France, Spain and further afield. To this end, many researchers from the scientific community have contributed to this book to share their research results.

Download or read book Analysis of Rolling Element Bearings written by Wan Changsen and published by . This book was released on 1991 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis of Rolling Element Bearings provides a comprehensive introduction into the theory and design of rolling element bearings.