Download or read book Condition Monitoring of Rolling Element Bearings by the High Frequency Resonance Technique written by Mohsen M. Alwa and published by . This book was released on 2006 with total page 83 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Vibration Monitoring of Rolling Element Bearings by the High frequency Resonance Technique written by P. D. McFadden and published by . This book was released on 1983 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Implementing the High frequency Resonance Technique for the Vibration Monitoring of Rolling Element Bearings written by P. D. McFadden and published by . This book was released on 1983 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Non parametric and Non filtering Methods for Rolling Element Bearing Condition Monitoring written by Hamid Faghidi and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Rolling element bearings are one of the most significant elements and frequently-used components in mechanical systems. Bearing fault detection and diagnosis is important for preventing productivity loss and averting catastrophic failures of mechanical systems. In industrial applications, bearing life is often difficult to predict due to different application conditions, load and speed variations, as well as maintenance practices. Therefore, reliable fault detection is necessary to ensure productive and safe operations. Vibration analysis is the most widely used method for detection and diagnosis of bearing malfunctions. A measured vibration signal from a sensor is often contaminated by noise and vibration interference components. Over the years, many methods have been developed to reveal fault signatures, and remove noise and vibration interference components. Though many vibration based methods have been proposed in the literature, the high frequency resonance (HFR) technique is one of a very few methods have received certain industrial acceptance. However, the effectiveness of the HFR methods depends, to a great extent, on some parameters such as bandwidth and centre frequency of the fault excited resonance, and window length. Proper selection these parameters is often a knowledge-demanding and time-consuming process. In particular, the filter designed based on the improperly selected bandwidth and center frequency of the fault excited resonance can filter out the true fault information and mislead the detection/diagnosis decisions. In addition, even if these parameters can be selected properly at beginning of each process, they may become invalid in a time-varying environment after a certain period of time. Hence, they may have to be re-calculated and updated, which is again a time-consuming and error-prone process. This undermines the practical significance of the above methods for online monitoring of bearing conditions. To overcome the shortcomings of existing methods, the following four non-parametric and non-filtering methods are proposed: 1. An amplitude demodulation differentiation (ADD) method, 2. A calculus enhanced energy operator (CEEO) method, 3. A higher order analytic energy operator (HO_AEO) approach, and 4. A higher order energy operator fusion (HOEO_F) technique. The proposed methods have been evaluated using both simulated and experimental data.

Download or read book Condition Monitoring of Rolling Element Bearings written by Atul Andhare and published by LAP Lambert Academic Publishing. This book was released on 2010-05 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rolling bearings are the most important machine elements. Proper functioning of a machine depends on condition of bearings. Vibrations help in diagnosing various faults in machines. Therefore, vibration based condition monitoring is the most popular method to know health of any machine. However, as found from the literature, vibration monitoring and diagnostics of faults in tapered roller bearing is not well established. This book is therefore focused on vibration based condition monitoring of tapered roller bearings. It presents results of experiments performed towards diagnosis of defects in tapered roller bearings using vibration analysis. The bearing vibration data are analyzed using various time and frequency domain techniques. The results for defect-free and defective bearings are compared to get information for defect diagnosis. A MATLAB based computer interface, which was developed for vibration signal processing and diagnostics, is also discussed in the book. This interface made use of all the time and frequency domain vibration data to diagnose defects in bearings. This book will be useful for the practicing engineers and students working on condition monitoring.

Download or read book Vibration based Condition Monitoring written by Robert Bond Randall and published by John Wiley & Sons. This book was released on 2011-03-25 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Without doubt the best modern and up-to-date text on the topic, wirtten by one of the world leading experts in the field. Should be on the desk of any practitioner or researcher involved in the field of Machine Condition Monitoring" Simon Braun, Israel Institute of Technology Explaining complex ideas in an easy to understand way, Vibration-based Condition Monitoring provides a comprehensive survey of the application of vibration analysis to the condition monitoring of machines. Reflecting the natural progression of these systems by presenting the fundamental material and then moving onto detection, diagnosis and prognosis, Randall presents classic and state-of-the-art research results that cover vibration signals from rotating and reciprocating machines; basic signal processing techniques; fault detection; diagnostic techniques, and prognostics. Developed out of notes for a course in machine condition monitoring given by Robert Bond Randall over ten years at the University of New South Wales, Vibration-based Condition Monitoring: Industrial, Aerospace and Automotive Applications is essential reading for graduate and postgraduate students/ researchers in machine condition monitoring and diagnostics as well as condition monitoring practitioners and machine manufacturers who want to include a machine monitoring service with their product. Includes a number of exercises for each chapter, many based on Matlab, to illustrate basic points as well as to facilitate the use of the book as a textbook for courses in the topic. Accompanied by a website www.wiley.com/go/randall housing exercises along with data sets and implementation code in Matlab for some of the methods as well as other pedagogical aids. Authored by an internationally recognised authority in the area of condition monitoring.

Download or read book Rolling Element Bearing Condition Monitoring Using High Frequency Resonances written by Edwin Dormer and published by . This book was released on 1988 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Vibrations in Rotating Machinery written by IMechE (Institution of Mechanical Engineers) and published by John Wiley & Sons. This book was released on 2004-10-22 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: This essential text contains the papers from the 8th international IMechE conference on Vibrations in Rotating Machinery held at the University of Wales, Swansea in September 2004. The themes of the volume are new developments and industrial applications of current technology relevant to the vibration and noise of rotating machines and assemblies. TOPICS INCLUDE Rotor balancing – including active and automatic balancing Special rotating machines – including micromachines Oil film bearings and dampers Active control methods for rotating machines Smart machine technology Dynamics of assembled rotors Component life predictions and life extension strategies The dynamics of geared systems Cracked rotors – detection, location ad prognosis Chaotic behaviour in machines Experimental methods and discoveries.

Download or read book A Model for the Extraction of Periodic Waveforms by Time Domain Averaging written by P. D. McFadden and published by . This book was released on 1986 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is shown that the existing comb filter model of time domain averaging does not correctly describe the extraction of periodic waveforms from additive noise using a digital computer because it assumes a knowledge of the signal over an infinite time and the result it produces is not exactly periodic. A revised model is presented which requires only a finite number of samples and which produces a result which is periodic. It is demonstrated that the rejection of periodic noise of a known frequency can be optimized by the selection of a suitable number of averages.

Download or read book Condition Monitoring with Vibration Signals written by Hosameldin Ahmed and published by John Wiley & Sons. This book was released on 2020-01-07 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an extensive, up-to-date treatment of techniques used for machine condition monitoring Clear and concise throughout, this accessible book is the first to be wholly devoted to the field of condition monitoring for rotating machines using vibration signals. It covers various feature extraction, feature selection, and classification methods as well as their applications to machine vibration datasets. It also presents new methods including machine learning and compressive sampling, which help to improve safety, reliability, and performance. Condition Monitoring with Vibration Signals: Compressive Sampling and Learning Algorithms for Rotating Machines starts by introducing readers to Vibration Analysis Techniques and Machine Condition Monitoring (MCM). It then offers readers sections covering: Rotating Machine Condition Monitoring using Learning Algorithms; Classification Algorithms; and New Fault Diagnosis Frameworks designed for MCM. Readers will learn signal processing in the time-frequency domain, methods for linear subspace learning, and the basic principles of the learning method Artificial Neural Network (ANN). They will also discover recent trends of deep learning in the field of machine condition monitoring, new feature learning frameworks based on compressive sampling, subspace learning techniques for machine condition monitoring, and much more. Covers the fundamental as well as the state-of-the-art approaches to machine condition monitoringguiding readers from the basics of rotating machines to the generation of knowledge using vibration signals Provides new methods, including machine learning and compressive sampling, which offer significant improvements in accuracy with reduced computational costs Features learning algorithms that can be used for fault diagnosis and prognosis Includes previously and recently developed dimensionality reduction techniques and classification algorithms Condition Monitoring with Vibration Signals: Compressive Sampling and Learning Algorithms for Rotating Machines is an excellent book for research students, postgraduate students, industrial practitioners, and researchers.

Download or read book Signal Analysis written by Alfred Mertins and published by Wiley. This book was released on 1999-03-12 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Signal analysis gives an insight into the properties of signals and stochastic processes by methodology. Linear transforms are integral to the continuing growth of signal processes as they characterize and classify signals. In particular, those transforms that provide time-frequency signal analysis are attracting greater numbers of researchers and are becoming an area of considerable importance. The key characteristic of these transforms, along with a certain time-frequency localization called the wavelet transform and various types of multirate filter banks, is their high computational efficiency. It is this computational efficiently which accounts for their increased application. This book provides a complete overview and introduction to signal analysis. It presents classical and modern signal analysis methods in a sequential structure starting with the background to signal theory. Progressing through the book the author introduces more advanced topics in an easy to understand style. Including recent and emerging topics such as filter banks with perfect reconstruction, time frequency and wavelets. With great accuracy and technical merit, this book makes a useful and original contribution to the current literature.

Download or read book Condition Monitoring of Rolling Element Bearings written by A. F. Khan and published by . This book was released on 1991 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis explores the individual capabilities of various vibration-based condition monitoring techniques in an attempt to use them in parallel to develop a reliable and cost effective system for rolling element bearings. This includes detection of damage, diagnosis of its location, and monitoring its failure trend enabling a prognosis of the remaining bearing life. This also requires the choice of appropriate monitoring intervals during the failure trend monitoring. A new technique, ratio analysis, which monitors the ratio of the levels in the above mentioned two frequency bands, is used effectively in defining the monitoring intervals. It is shown that total life span of a bearing can be divided into three stages, namely: pre-damage, post- damage and pre-failure, and the monitoring intervals can be set accordingly using the LB subscript ten figure and the characteristic of the ratio curve.

Download or read book Vibration Monitoring of Induction Motors written by William T. Thomson and published by Cambridge University Press. This book was released on 2020-12-03 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master the art of vibration monitoring of induction motors with this unique guide to on-line condition assessment and fault diagnosis, building on the author's fifty years of investigative expertise. It includes: *Robust techniques for diagnosing of a wide range of common faults, including shaft misalignment and/or soft foot, rolling element bearing faults, sleeve bearing faults, magnetic and vibrational issues, resonance in vertical motor drives, and vibration and acoustic noise from inverters. *Detailed technical coverage of thirty real-world industrial case studies, from initial vibration spectrum analysis through to fault diagnosis and final strip-down. *An introduction to real-world vibration spectrum analysis for fault diagnosis, and practical guidelines to reduce bearing failure through effective grease management. This definitive book is essential reading for industrial end-users, engineers, and technicians working in motor design, manufacturing, and condition monitoring. It will also be of interest to researchers and graduate students working on condition monitoring.

Download or read book Engineering Asset Management written by Joseph Mathew and published by Springer Science & Business Media. This book was released on 2008-02-06 with total page 1261 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is with great pleasure that we welcome you to the inaugural World Congress on Engineering Asset Management (WCEAM) being held at the Conrad Jupiters Hotel on the Gold Coast from July 11 to 14, 2006. More than 170 authors from 28 countries have contributed over 160 papers to be presented over the first three days of the conference. Day four will be host to a series of workshops devoted to the practice of various aspects of Engineering Asset Management. WCEAM is a new annual global forum on the various multidisciplinary aspects of Engineering Asset Management. It deals with the presentation and publication of outputs of research and development activities as well as the application of knowledge in the practical aspects of: strategic asset management risk management in asset management design and life-cycle integrity of physical assets asset performance and level of service models financial analysis methods for physical assets reliability modelling and prognostics information systems and knowledge management asset data management, warehousing and mining condition monitoring and intelligent maintenance intelligent sensors and devices regulations and standards in asset management human dimensions in integrated asset management education and training in asset management and performance management in asset management. We have attracted academics, practitioners and scientists from around the world to share their knowledge in this important emerging transdiscipline that impacts on almost every aspect of daily life.

Download or read book Morphology based Fault Feature Extraction and Resampling free Fault Identification Techniques for Rolling Element Bearing Condition Monitoring written by Juanjuan SHI and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: As the failure of a bearing could cause cascading breakdowns of the mechanical system and then lead to costly repairs and production delays, bearing condition monitoring has received much attention for decades. One of the primary methods for this purpose is based on the analysis of vibration signal measured by accelerometers because such data are information-rich. The vibration signal collected from a defective bearing is, however, a mixture of several signal components including the fault-generated impulses, interferences from other machine components, and background noise, where fault-induced impulses are further modulated by various low frequency signal contents. The compounded effects of interferences, background noise and the combined modulation effects make it difficult to detect bearing faults. This is further complicated by the nonstationary nature of vibration signals due to speed variations in some cases, such as the bearings in a wind turbine. As such, the main challenges in the vibration-based bearing monitoring are how to address the modulation, noise, interference, and nonstationarity matters. Over the past few decades, considerable research activities have been carried out to deal with the first three issues. Recently, the nonstationarity matter has also attracted strong interests from both industry and academic community. Nevertheless, the existing techniques still have problems (deficiencies) as listed below: (1) The existing enveloping methods for bearing fault feature extraction are often adversely affected by multiple interferences. To eliminate the effect of interferences, the prefiltering is required, which is often parameter-dependent and knowledge-demanding. The selection of proper filter parameters is challenging and even more so in a time-varying environment. (2) Even though filters are properly designed, they are of little use in handling in-band noise and interferences which are also barriers for bearing fault detection, particularly for incipient bearing faults with weak signatures. (3) Conventional approaches for bearing fault detection under constant speed are no longer applicable to the variable speed case because such speed fluctuations may cause zsmearingy of the discrete frequencies in the frequency representation. Most current methods for rotating machinery condition monitoring under time-varying speed require signal resampling based on the shaft rotating frequency. For the bearing case, the shaft rotating frequency is, however, often unavailable as it is coupled with the instantaneous fault characteristic frequency (IFCF) by a fault characteristic coefficient (FCC) which cannot be determined without knowing the fault type. Additionally, the effectiveness of resampling-based methods is largely dependent on the accuracy of resampling procedure which, even if reliable, can complicate the entire fault detection process substantially. (4) Time-frequency analysis (TFA) has proved to be a powerful tool in analyzing nonstationary signal and moreover does not require resampling for bearing fault identification. However, the diffusion of time-frequency representation (TFR) along time and frequency axes caused by lack of energy concentration would handicap the application of the TFA. In fact, the reported TFA applications in bearing fault diagnosis are still very limited. To address the first two aforementioned problems, i.e., (1) and (2), for constant speed cases, two morphology-based methods are proposed to extract bearing fault feature without prefiltering. Another two methods are developed to specifically handle the remaining problems for the bearing fault detection under time-varying speed conditions. These methods are itemized as follows: (1) An efficient enveloping method based on signal Fractal Dimension (FD) for bearing fault feature extraction without prefiltering, (2) A signal decomposition technique based on oscillatory behaviors for noise reduction and interferences removal (including in-band ones), (3) A prefiltering-free and resampling-free approach for bearing fault diagnosis under variable speed condition via the joint application of FD-based envelope demodulation and generalized demodulation (GD), and (4) A combined dual-demodulation transform (DDT) and synchrosqueezing approach for TFR energy concentration level enhancement and bearing fault identification. With respect to constant speed cases, the FD-based enveloping method, where a short time Fractal dimension (STFD) transform is proposed, can suppress interferences and highlight the fault-induced impulsive signature by transforming the vibration signal into a STFD representation. Its effectiveness, however, deteriorates with the increased complexity of the interference frequencies, particularly for multiple interferences with high frequencies. As such, the second method, which isolates fault-induced transients from interferences and noise via oscillatory behavior analysis, is then developed to complement the FD-based enveloping approach. Both methods are independent of frequency information and free from prefiltering, hence eliminating the tedious process for filter parameter specification. The in-band vibration interferences can also be suppressed mainly by the second approach. For the nonstationary cases, a prefiltering-free and resampling-free strategy is developed via the joint application of STFD and GD, from which a resampling-free order spectrum can be derived. This order spectrum can effectively reveal not only the existence of a fault but also its location. However, the success of this method relies largely on an effective enveloping technique. To address this matter and at the same time to exploit the advantages of TFA in nonstationary signal analysis, a TFA technique, involving dual demodulations and an iterative process, is developed and innovatively applied to bearing fault identification. The proposed methods have been validated using both simulation and experimental data collected in our lab. The test results have shown that the first two methods can effectively extract fault signatures, remove the interferences (including in-band ones) without prefiltering, and detect fault types from vibration signals for constant speed cases. The last two have shown to be effective in detecting faults and discern fault types from vibration data collected under variable speed conditions without resampling and prefiltering.

Download or read book Bearing Technology written by Pranav H. Darji and published by BoD – Books on Demand. This book was released on 2017-05-31 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the twenty-first century, bearings are expected to perform better in the form of various operating conditions, that is from low speed to extremely high speed and from low load to huge load applications. The expectations from the field of bearing technology are great. During the recent years, we have been witnessing the development of a new generation of mechanical systems that are highly miniaturized and very sophisticated, yet extremely robust. Technological progress creates increasingly arduous conditions for rolling mechanisms.

Download or read book Online Condition Monitoring of Rolling Element Bearings written by Yunxuan Li and published by . This book was released on 2006 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: