Download or read book Advances in Condition Monitoring of Machinery in Non Stationary Operations written by Fakher Chaari and published by Springer. This book was released on 2015-07-16 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides readers with a snapshot of recent research and technological trends in the field of condition monitoring of machinery working under a broad range of operating conditions. Each chapter, accepted after a rigorous peer-review process, reports on an original piece of work presented and discussed at the 4th International Conference on Condition Monitoring of Machinery in Non-stationary Operations, CMMNO 2014, held on December 15-16, 2014, in Lyon, France. The contributions have been grouped into three different sections according to the main subfield (signal processing, data mining or condition monitoring techniques) they are related to. The book includes both theoretical developments as well as a number of industrial case studies, in different areas including, but not limited to: noise and vibration; vibro-acoustic diagnosis; signal processing techniques; diagnostic data analysis; instantaneous speed identification; monitoring and diagnostic systems; and dynamic and fault modeling. This book not only provides a valuable resource for both academics and professionals in the field of condition monitoring, it also aims at facilitating communication and collaboration between the two groups.

Download or read book Eco friendly Innovations in Electricity Transmission and Distribution Networks written by Jean-Luc Bessede and published by Elsevier. This book was released on 2014-11-27 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electricity transmission and distribution (T&D) networks carry electricity from generation sites to demand sites. With the increasing penetration of decentralised and renewable energy systems, in particular variable power sources such as wind turbines, and the rise in demand-side technologies, the importance of innovative products has never been greater. Eco-design approaches and standards in this field are aimed at improving the performance as well as the overall sustainability of T&D network equipment. This multidisciplinary reference provides coverage of developments and lessons-learned in the fields of eco-design of innovation from product-specific issues to system approaches, including case studies featuring problem-solving methodologies applicable to electricity transmission and distribution networks. - Discusses key environmental issues and methodologies for eco-design, and applies this to development of equipment for electricity transmission and distribution. - Provides analysis of using and assessing advanced equipment for wind energy systems. - Includes reviews of the energy infrastructure for demand-side management in the US and Scandinavia.

Download or read book Topics in Modal Analysis II Volume 6 written by R. Allemang and published by Springer Science & Business Media. This book was released on 2012-04-28 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: Topics in Modal Analysis II, Volume 6: Proceedings of the 30th IMAC, A Conference and Exposition on Structural Dynamics, 2012, is the sixth volume of six from the Conference and brings together 65 contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Structural Dynamics, including papers on: Aerospace, Acoustics, Energy Harvesting, Shock and Vibration, Finite Element, Structural Health Monitoring, Biodynamics Experimental Techniques, Damage Detection, Rotating Machinery, Sports Equipment Dynamics, Aircraft/Aerospace.

Download or read book Soft Computing in Condition Monitoring and Diagnostics of Electrical and Mechanical Systems written by Hasmat Malik and published by Springer Nature. This book was released on 2020-01-17 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses a range of complex issues associated with condition monitoring (CM), fault diagnosis and detection (FDD) in smart buildings, wide area monitoring (WAM), wind energy conversion systems (WECSs), photovoltaic (PV) systems, structures, electrical systems, mechanical systems, smart grids, etc. The book’s goal is to develop and combine all advanced nonintrusive CMFD approaches on a common platform. To do so, it explores the main components of various systems used for CMFD purposes. The content is divided into three main parts, the first of which provides a brief introduction, before focusing on the state of the art and major research gaps in the area of CMFD. The second part covers the step-by-step implementation of novel soft computing applications in CMFD for electrical and mechanical systems. In the third and final part, the simulation codes for each chapter are included in an extensive appendix to support newcomers to the field.

Download or read book Electromagnetic Nondestructive Evaluation XX written by H.G. Ramos and published by IOS Press. This book was released on 2017-06-02 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electromagnetic Nondestructive Evaluation (ENDE) provides an important method for assessing the condition of objects by observing the electromagnetic response to electric currents and/or magnetic fields introduced within them. Because it does not permanently alter the objects being tested, it is an invaluable tool for product evaluation, troubleshooting and research, and is employed in many fields from engineering and medicine to art. This volume presents selected papers from the International Workshop on Electromagnetic Nondestructive Evaluation (ENDE2016), held in Lisbon, Portugal, in September 2016. This 21st edition of the workshop focused on the theoretical and application research into methods of electromagnetic non-destructive evaluation and, like previous editions, provided a forum for exchanging ideas and discussing recent developments. The book is divided into 6 sections which cover advanced ENDE sensors; material characterization; new developments; analytical and numerical modeling; inverse problems; signal processing; monitoring and diagnosis of mechanical structures; and innovative industrial applications of ENDE. Providing an overview of recent research and developments in the field, the book will be of interest to all those involved in ENDE research or applying it in their work.

Download or read book Advances in Maritime Technology and Engineering written by Carlos Guedes Soares and published by CRC Press. This book was released on 2024-05-08 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Maritime Technology and Engineering comprises a collection of the papers presented at the 7th International Conference on Maritime Technology and Engineering (MARTECH 2024) held in Lisbon, Portugal, on 14-16 May 2024. This Conference has evolved from the series of biannual national conferences in Portugal, which have become an international event, reflecting the internationalization of the maritime sector and its activities. MARTECH 2024 is the seventh of this new series of biannual conferences. This book comprises 142 contributions that were reviewed by an International Scientific Committee. Advances in Maritime Technology and Engineering is dedicated to maritime transportation, ports as well as maritime safety and reliability. It further comprises sections dedicated to ship design, cruise ship design, and to the structural aspects of ship design, such as ultimate strength and composites, subsea structures as pipelines, and to ship building and ship repair. The Proceedings in Marine Technology and Ocean Engineering series is dedicated to the publication of proceedings of peer-reviewed international conferences dealing with various aspects of “Marine Technology and Ocean Engineering”. The series includes the proceedings of the following conferences: the International Maritime Association of the Mediterranean (IMAM) conferences, the Marine Structures (MARSTRUCT) conferences, the Renewable Energies Offshore (RENEW) conferences and the Maritime Technology (MARTECH) conferences. The “Marine Technology and Ocean Engineering” series is also open to new conferences that cover topics on the sustainable exploration of marine resources in various fields, such as maritime transport and ports, usage of the ocean including coastal areas, nautical activities, the exploration and exploitation of mineral resources, the protection of the marine environment and is resources, and risk analysis, safety and reliability. The aim of the series is to stimulate advanced education and training through the wide dissemination of the results of scientific research.

Download or read book Applications of Advanced Control and Artificial Intelligence in Smart Grids written by Qiuye Sun and published by Frontiers Media SA. This book was released on 2022-05-11 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Risk informed Methods and Applications in Nuclear and Energy Engineering written by Curtis Smith and published by Academic Press. This book was released on 2023-11-16 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Risk-informed Methods and Applications in Nuclear and Energy Engineering: Modelling, Experimentation, and Validation presents a comprehensive view of the latest technical approaches and experimental capabilities in nuclear energy engineering. Based on Idaho National Laboratory's popular summer school series, this book compiles a collection of entries on the cutting-edge research and knowledge presented by proponents and developers of current and future nuclear systems, focusing on the connection between modelling and experimental approaches. Included in this book are key topics such as probabilistic concepts for risk analysis, the survey of legacy reliability and risk analysis tools, and newly developed tools supporting dynamic probabilistic risk-assessment. This book is an insightful and inspiring compilation of work from top nuclear experts from INL. Industry professionals, researchers and academics working in nuclear engineering, safety, operations and training will gain a board picture of the current state-of-practice and be able to apply that to their own risk-assessment studies. - Based on Idaho National Laboratory's summer school series, this book is a collection of entries from proponents and developers of current and future nuclear systems - Provides an up-to-date view of current technical approaches and experimental capabilities in nuclear energy engineering, covering modeling and validation, and focusing on risk-informed methods and applications - Equips the reader with an understanding of various case studies and experimental validations to enable them to carry out a risk-assessment study

Download or read book Harris Shock and Vibration Handbook written by Cyril M. Harris and published by McGraw-Hill Professional Publishing. This book was released on 2002 with total page 1468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher Description

Download or read book Dynamics of Civil Structures Volume 2 written by Shamim Pakzad and published by Springer. This book was released on 2019-05-22 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamics of Civil Structures, Volume 2: Proceedings of the 37th IMAC, A Conference and Exposition on Structural Dynamics, 2019, the second volume of eight from the Conference brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of the Dynamics of Civil Structures, including papers on: Structural Vibration Humans & Structures Innovative Measurement for Structural Applications Smart Structures and Automation Modal Identification of Structural Systems Bridges and Novel Vibration Analysis Sensors and Control

Download or read book Applications of Vibration Analysis to the Condition Monitoring of Rolling Element Bearings written by Neil Stanley Swansson and published by . This book was released on 1984 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mechatronic Systems and Materials V written by Zdzisław Gosiewski and published by Trans Tech Publications Ltd. This book was released on 2013-03-18 with total page 675 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters BCI (WoS). The 108 peer reviewed papers on “Mechatronic Systems and Materials” are grouped as follows: I. Integrated Diagnostics; II. Failure Analysis; III. Tribology in Mechatronic Systems; IV. Signal and Image Processing; V. Measurement Techniques; VI. Multifunctional and Smart Materials; VII. Metallic Alloys; VIII. Biomaterials; IX. Functional Composites; X. Nanomaterials; XI. Ceramics and Glasses; XII. New Trends in Mechatronic and Materials Science Education.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1987 with total page 964 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Annual Index abstracts of SAE Technical Papers written by and published by . This book was released on 2006 with total page 1000 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Australian National Bibliography written by and published by . This book was released on 1986 with total page 1552 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Lubrication Fundamentals Revised and Expanded written by Don M. Pirro and published by CRC Press. This book was released on 2017-07-31 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: Careful selection of the right lubricant(s) is required to keep a machine running smoothly. Lubrication Fundamentals, Third Edition, Revised and Expanded describes the need and design for the many specialized oils and greases used to lubricate machine elements and builds on the tribology and lubrication basics discussed in previous editions. Utilizing knowledge from leading experts in the field, the third edition covers new lubrication requirements, crude oil composition and selection, base stock manufacture, lubricant formulation and evaluation, machinery and lubrication fundamentals, and environmental stewardship. The book combines lubrication theory with practical knowledge, and provides many useful illustrations to highlight key industrial, commercial, marine, aviation, and automotive lubricant applications and concepts. All previous edition chapters have been updated to include new technologies, applications, and specifications that have been introduced in the past 15 years. What’s New in the Third Edition: Adds three new chapters on the growing renewable energy application of wind turbines, the impact of lubricants on energy efficiency, and best practice guidelines on establishing an in-service lubricant analysis program Updates API, SAE, and ACEA engine oil specifications, descriptions of new engine oil tests, impact of engine and fuel technology trends on engine oil Includes the latest environmental lubricant tests, definitions, and labelling programs Compiles expert information from ExxonMobil publications and the foremost international equipment builders and industry associations Covers key influences impacting lubricant formulations and technology Offers data on global energy demand and interesting statistics such as the worldwide population of nuclear reactors, wind turbines, and output of hydraulic turbines Presents new sections on the history of synthetic lubricants and hazardous chemical labeling for lubricants Whether used as a training guide for industry novices, a textbook for students to understand lubrication principles, or a technical reference for experienced lubrication and tribology professionals, Lubrication Fundamentals, Third Edition, Revised and Expanded is a "must read" for maintenance professionals, lubricant formulators and marketers, chemists, and lubrication, surface, chemical, mechanical, and automotive engineers.

Download or read book Health Monitoring and Management of Civil Infrastructure Systems written by Society of Photo-optical Instrumentation Engineers and published by SPIE-International Society for Optical Engineering. This book was released on 2001 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: