Download or read book Bearing Technology written by Pranav H. Darji and published by BoD – Books on Demand. This book was released on 2017-05-31 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the twenty-first century, bearings are expected to perform better in the form of various operating conditions, that is from low speed to extremely high speed and from low load to huge load applications. The expectations from the field of bearing technology are great. During the recent years, we have been witnessing the development of a new generation of mechanical systems that are highly miniaturized and very sophisticated, yet extremely robust. Technological progress creates increasingly arduous conditions for rolling mechanisms.

Download or read book Vibrations in Rotating Machinery written by IMechE (Institution of Mechanical Engineers) and published by John Wiley & Sons. This book was released on 2004-10-22 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: This essential text contains the papers from the 8th international IMechE conference on Vibrations in Rotating Machinery held at the University of Wales, Swansea in September 2004. The themes of the volume are new developments and industrial applications of current technology relevant to the vibration and noise of rotating machines and assemblies. TOPICS INCLUDE Rotor balancing – including active and automatic balancing Special rotating machines – including micromachines Oil film bearings and dampers Active control methods for rotating machines Smart machine technology Dynamics of assembled rotors Component life predictions and life extension strategies The dynamics of geared systems Cracked rotors – detection, location ad prognosis Chaotic behaviour in machines Experimental methods and discoveries.

Download or read book Vibration based Condition Monitoring written by Robert Bond Randall and published by John Wiley & Sons. This book was released on 2011-03-25 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Without doubt the best modern and up-to-date text on the topic, wirtten by one of the world leading experts in the field. Should be on the desk of any practitioner or researcher involved in the field of Machine Condition Monitoring" Simon Braun, Israel Institute of Technology Explaining complex ideas in an easy to understand way, Vibration-based Condition Monitoring provides a comprehensive survey of the application of vibration analysis to the condition monitoring of machines. Reflecting the natural progression of these systems by presenting the fundamental material and then moving onto detection, diagnosis and prognosis, Randall presents classic and state-of-the-art research results that cover vibration signals from rotating and reciprocating machines; basic signal processing techniques; fault detection; diagnostic techniques, and prognostics. Developed out of notes for a course in machine condition monitoring given by Robert Bond Randall over ten years at the University of New South Wales, Vibration-based Condition Monitoring: Industrial, Aerospace and Automotive Applications is essential reading for graduate and postgraduate students/ researchers in machine condition monitoring and diagnostics as well as condition monitoring practitioners and machine manufacturers who want to include a machine monitoring service with their product. Includes a number of exercises for each chapter, many based on Matlab, to illustrate basic points as well as to facilitate the use of the book as a textbook for courses in the topic. Accompanied by a website www.wiley.com/go/randall housing exercises along with data sets and implementation code in Matlab for some of the methods as well as other pedagogical aids. Authored by an internationally recognised authority in the area of condition monitoring.

Download or read book Electrical Systems 2 written by Abdenour Soualhi and published by John Wiley & Sons. This book was released on 2020-04-14 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: Methods of diagnosis and prognosis play a key role in the reliability and safety of industrial systems. Failure diagnosis requires the use of suitable sensors, which provide signals that are processed to monitor features (health indicators) for defects. These features are required to distinguish between operating states, in order to inform the operator of the severity level, or even the type, of a failure. Prognosis is defined as the estimation of a systems lifespan, including how long remains and how long has passed. It also encompasses the prediction of impending failures. This is a challenge that many researchers are currently trying to address. Electrical Systems, a book in two volumes, informs readers of the theoretical solutions to this problem, and the results obtained in several laboratories in France, Spain and further afield. To this end, many researchers from the scientific community have contributed to this book to share their research results.

Download or read book Vibration Monitoring of Induction Motors written by William T. Thomson and published by Cambridge University Press. This book was released on 2020-12-03 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master the art of vibration monitoring of induction motors with this unique guide to on-line condition assessment and fault diagnosis, building on the author's fifty years of investigative expertise. It includes: *Robust techniques for diagnosing of a wide range of common faults, including shaft misalignment and/or soft foot, rolling element bearing faults, sleeve bearing faults, magnetic and vibrational issues, resonance in vertical motor drives, and vibration and acoustic noise from inverters. *Detailed technical coverage of thirty real-world industrial case studies, from initial vibration spectrum analysis through to fault diagnosis and final strip-down. *An introduction to real-world vibration spectrum analysis for fault diagnosis, and practical guidelines to reduce bearing failure through effective grease management. This definitive book is essential reading for industrial end-users, engineers, and technicians working in motor design, manufacturing, and condition monitoring. It will also be of interest to researchers and graduate students working on condition monitoring.

Download or read book Advances in Asset Management and Condition Monitoring written by Andrew Ball and published by Springer Nature. This book was released on 2020-08-27 with total page 1566 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers select contributions from the 32nd International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2019), held at the University of Huddersfield, UK in September 2019, and jointly organized by the University of Huddersfield and COMADEM International. The aim of the Congress was to promote awareness of the rapidly emerging interdisciplinary areas of condition monitoring and diagnostic engineering management. The contents discuss the latest tools and techniques in the multidisciplinary field of performance monitoring, root cause failure modes analysis, failure diagnosis, prognosis, and proactive management of industrial systems. There is a special focus on digitally enabled asset management and covers several topics such as condition monitoring, maintenance, structural health monitoring, non-destructive testing and other allied areas. Bringing together expert contributions from academia and industry, this book will be a valuable resource for those interested in latest condition monitoring and asset management techniques.

Download or read book Fundamentals of Noise and Vibration Analysis for Engineers written by M. P. Norton and published by Cambridge University Press. This book was released on 2003-10-16 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: Noise and Vibration affects all kinds of engineering structures, and is fast becoming an integral part of engineering courses at universities and colleges around the world. In this second edition, Michael Norton's classic text has been extensively updated to take into account recent developments in the field. Much of the new material has been provided by Denis Karczub, who joins Michael as second author for this edition. This book treats both noise and vibration in a single volume, with particular emphasis on wave-mode duality and interactions between sound waves and solid structures. There are numerous case studies, test cases, and examples for students to work through. The book is primarily intended as a textbook for senior level undergraduate and graduate courses, but is also a valuable reference for researchers and professionals looking to gain an overview of the field.

Download or read book Signal Analysis written by Alfred Mertins and published by Wiley. This book was released on 1999-03-12 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Signal analysis gives an insight into the properties of signals and stochastic processes by methodology. Linear transforms are integral to the continuing growth of signal processes as they characterize and classify signals. In particular, those transforms that provide time-frequency signal analysis are attracting greater numbers of researchers and are becoming an area of considerable importance. The key characteristic of these transforms, along with a certain time-frequency localization called the wavelet transform and various types of multirate filter banks, is their high computational efficiency. It is this computational efficiently which accounts for their increased application. This book provides a complete overview and introduction to signal analysis. It presents classical and modern signal analysis methods in a sequential structure starting with the background to signal theory. Progressing through the book the author introduces more advanced topics in an easy to understand style. Including recent and emerging topics such as filter banks with perfect reconstruction, time frequency and wavelets. With great accuracy and technical merit, this book makes a useful and original contribution to the current literature.

Download or read book Condition Monitoring and Faults Diagnosis of Induction Motors written by Nordin Saad and published by CRC Press. This book was released on 2018-07-11 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers various issues related to machinery condition monitoring, signal processing and conditioning, instrumentation and measurements, faults for induction motors failures, new trends in condition monitoring, and the fault identification process using motor currents electrical signature analysis. It aims to present a new non-invasive and non-intrusive condition monitoring system, which has the capability to detect various defects in induction motor at incipient stages within an arbitrary noise conditions. The performance of the developed system has been analyzed theoretically and experimentally under various loading conditions of the motor. Covers current and new approaches applied to fault diagnosis and condition monitoring. Integrates concepts and practical implementation of electrical signature analysis. Utilizes LabVIEW tool for condition monitoring problems. Incorporates real-world case studies. Paves way a technology potentially for prescriptive maintenance via IIoT.

Download or read book Machinery Condition Monitoring written by Amiya Ranjan Mohanty and published by CRC Press. This book was released on 2014-12-22 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Find the Fault in the Machines Drawing on the author’s more than two decades of experience with machinery condition monitoring and consulting for industries in India and abroad, Machinery Condition Monitoring: Principles and Practices introduces the practicing engineer to the techniques used to effectively detect and diagnose faults in machines. Providing the working principle behind the instruments, the important elements of machines as well as the technique to understand their conditions, this text presents every available method of machine fault detection occurring in machines in general, and rotating machines in particular. A Single-Source Solution for Practice Machinery Conditioning Monitoring Since vibration is one of the most widely used fault detection techniques, the book offers an assessment of vibration analysis and rotor-dynamics. It also covers the techniques of wear and debris analysis, and motor current signature analysis to detect faults in rotating mechanical systems as well as thermography, the nondestructive test NDT techniques (ultrasonics and radiography), and additional methods. The author includes relevant case studies from his own experience spanning over the past 20 years, and detailing practical fault diagnosis exercises involving various industries ranging from steel and cement plants to gas turbine driven frigates. While mathematics is kept to a minimum, he also provides worked examples and MATLAB® codes. This book contains 15 chapters and provides topical information that includes: A brief overview of the maintenance techniques Fundamentals of machinery vibration and rotor dynamics Basics of signal processing and instrumentation, which are essential for monitoring the health of machines Requirements of vibration monitoring and noise monitoring Electrical machinery faults Thermography for condition monitoring Techniques of wear debris analysis and some of the nondestructive test (NDT) techniques for condition monitoring like ultrasonics and radiography Machine tool condition monitoring Engineering failure analysis Several case studies, mostly on failure analysis, from the author’s consulting experience Machinery Condition Monitoring: Principles and Practices presents the latest techniques in fault diagnosis and prognosis, provides many real-life practical examples, and empowers you to diagnose the faults in machines all on your own.

Download or read book Proceedings of International Conference on Intelligent Manufacturing and Automation written by Hari Vasudevan and published by Springer. This book was released on 2018-11-04 with total page 697 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the outcomes of the International Conference on Intelligent Manufacturing and Automation (ICIMA 2018) organized by the Departments of Mechanical Engineering and Production Engineering at Dwarkadas J. Sanghvi College of Engineering, Mumbai, and the Indian Society of Manufacturing Engineers. It includes original research and the latest advances in the field, focusing on automation, mechatronics and robotics; CAD/CAM/CAE/CIM/FMS in manufacturing; product design and development; DFM/DFA/FMEA; MEMS and Nanotechnology; rapid prototyping; computational techniques; industrial engineering; manufacturing process management; modelling and optimization techniques; CRM, MRP and ERP; green, lean, agile and sustainable manufacturing; logistics and supply chain management; quality assurance and environment protection; advanced material processing and characterization; and composite and smart materials.

Download or read book Independent Component Analysis written by Aapo Hyvärinen and published by John Wiley & Sons. This book was released on 2004-04-05 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive introduction to ICA for students and practitioners Independent Component Analysis (ICA) is one of the most exciting new topics in fields such as neural networks, advanced statistics, and signal processing. This is the first book to provide a comprehensive introduction to this new technique complete with the fundamental mathematical background needed to understand and utilize it. It offers a general overview of the basics of ICA, important solutions and algorithms, and in-depth coverage of new applications in image processing, telecommunications, audio signal processing, and more. Independent Component Analysis is divided into four sections that cover: * General mathematical concepts utilized in the book * The basic ICA model and its solution * Various extensions of the basic ICA model * Real-world applications for ICA models Authors Hyvarinen, Karhunen, and Oja are well known for their contributions to the development of ICA and here cover all the relevant theory, new algorithms, and applications in various fields. Researchers, students, and practitioners from a variety of disciplines will find this accessible volume both helpful and informative.

Download or read book Advances in Fluid Dynamics written by B. Rushi Kumar and published by Springer Nature. This book was released on 2020-07-10 with total page 1014 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises selected peer-reviewed proceedings of the International Conference on Applications of Fluid Dynamics (ICAFD 2018) organized by the School of Advanced Sciences, Vellore Institute of Technology, India, in association with the University of Botswana and the Society for Industrial and Applied Mathematics (SIAM), USA. With an aim to identify the existing challenges in the area of applied mathematics and mechanics, the book emphasizes the importance of establishing new methods and algorithms to address these challenges. The topics covered include diverse applications of fluid dynamics in aerospace dynamics and propulsion, atmospheric sciences, compressible flow, environmental fluid dynamics, control structures, viscoelasticity and mechanics of composites. Given the contents, the book is a useful resource for students, researchers as well as practitioners.

Download or read book Condition Monitoring of Machinery in Non Stationary Operations written by Tahar Fakhfakh and published by Springer Science & Business Media. This book was released on 2012-03-19 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt: Condition monitoring of machines in non-stationary operations (CMMNO) can be seen as the major challenge for research in the field of machinery diagnostics. Condition monitoring of machines in non-stationary operations is the title of the presented book and the title of the Conference held in Hammamet - Tunisia March 26 – 28, 2012. It is the second conference under this title, first took place in Wroclaw - Poland , March 2011. The subject CMMNO comes directly from industry needs and observation of real objects. Most monitored and diagnosed objects used in industry works in non-stationary operations condition. The non-stationary operations come from fulfillment of machinery tasks, for which they are designed for. All machinery used in different kind of mines, transport systems, vehicles like: cars, buses etc, helicopters, ships and battleships and so on work in non-stationary operations. The papers included in the book are shaped by the organizing board of the conference and authors of the papers. The papers are divided into five sections, namely: Condition monitoring of machines in non-stationary operations Modeling of dynamics and fault in systems Signal processing and Pattern recognition Monitoring and diagnostic systems Noise and vibration of machines The presented book gives the back ground to the main objective of the CMMNO 2012 conference that is to bring together scientific community to discuss the major advances in the field of machinery condition monitoring in non-stationary conditions.

Download or read book An Introduction to Predictive Maintenance written by R. Keith Mobley and published by Elsevier. This book was released on 2002-10-24 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of An Introduction to Predictive Maintenance helps plant, process, maintenance and reliability managers and engineers to develop and implement a comprehensive maintenance management program, providing proven strategies for regularly monitoring critical process equipment and systems, predicting machine failures, and scheduling maintenance accordingly. Since the publication of the first edition in 1990, there have been many changes in both technology and methodology, including financial implications, the role of a maintenance organization, predictive maintenance techniques, various analyses, and maintenance of the program itself. This revision includes a complete update of the applicable chapters from the first edition as well as six additional chapters outlining the most recent information available. Having already been implemented and maintained successfully in hundreds of manufacturing and process plants worldwide, the practices detailed in this second edition of An Introduction to Predictive Maintenance will save plants and corporations, as well as U.S. industry as a whole, billions of dollars by minimizing unexpected equipment failures and its resultant high maintenance cost while increasing productivity. - A comprehensive introduction to a system of monitoring critical industrial equipment - Optimize the availability of process machinery and greatly reduce the cost of maintenance - Provides the means to improve product quality, productivity and profitability of manufacturing and production plants

Download or read book Engineering Asset Management written by Joseph Mathew and published by Springer Science & Business Media. This book was released on 2008-02-06 with total page 1261 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is with great pleasure that we welcome you to the inaugural World Congress on Engineering Asset Management (WCEAM) being held at the Conrad Jupiters Hotel on the Gold Coast from July 11 to 14, 2006. More than 170 authors from 28 countries have contributed over 160 papers to be presented over the first three days of the conference. Day four will be host to a series of workshops devoted to the practice of various aspects of Engineering Asset Management. WCEAM is a new annual global forum on the various multidisciplinary aspects of Engineering Asset Management. It deals with the presentation and publication of outputs of research and development activities as well as the application of knowledge in the practical aspects of: strategic asset management risk management in asset management design and life-cycle integrity of physical assets asset performance and level of service models financial analysis methods for physical assets reliability modelling and prognostics information systems and knowledge management asset data management, warehousing and mining condition monitoring and intelligent maintenance intelligent sensors and devices regulations and standards in asset management human dimensions in integrated asset management education and training in asset management and performance management in asset management. We have attracted academics, practitioners and scientists from around the world to share their knowledge in this important emerging transdiscipline that impacts on almost every aspect of daily life.

Download or read book Advanced Intelligent Computing Theories and Applications written by De-Shuang Huang and published by Springer Science & Business Media. This book was released on 2007-08-09 with total page 1397 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume, in conjunction with the two volumes CICS 0002 and LNCS 4681, constitutes the refereed proceedings of the Third International Conference on Intelligent Computing held in Qingdao, China, in August 2007. The 139 full papers published here were carefully reviewed and selected from among 2,875 submissions. These papers offer important findings and insights into the field of intelligent computing.