Download or read book Soft Computing in Condition Monitoring and Diagnostics of Electrical and Mechanical Systems written by Hasmat Malik and published by Springer Nature. This book was released on 2020-01-17 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses a range of complex issues associated with condition monitoring (CM), fault diagnosis and detection (FDD) in smart buildings, wide area monitoring (WAM), wind energy conversion systems (WECSs), photovoltaic (PV) systems, structures, electrical systems, mechanical systems, smart grids, etc. The book’s goal is to develop and combine all advanced nonintrusive CMFD approaches on a common platform. To do so, it explores the main components of various systems used for CMFD purposes. The content is divided into three main parts, the first of which provides a brief introduction, before focusing on the state of the art and major research gaps in the area of CMFD. The second part covers the step-by-step implementation of novel soft computing applications in CMFD for electrical and mechanical systems. In the third and final part, the simulation codes for each chapter are included in an extensive appendix to support newcomers to the field.
Download or read book Equipment Conditioning Monitoring and Techniques written by Alexander Arnfinn Olsen and published by Springer Nature. This book was released on with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Asset Management and Condition Monitoring written by Andrew Ball and published by Springer Nature. This book was released on 2020-08-27 with total page 1566 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers select contributions from the 32nd International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2019), held at the University of Huddersfield, UK in September 2019, and jointly organized by the University of Huddersfield and COMADEM International. The aim of the Congress was to promote awareness of the rapidly emerging interdisciplinary areas of condition monitoring and diagnostic engineering management. The contents discuss the latest tools and techniques in the multidisciplinary field of performance monitoring, root cause failure modes analysis, failure diagnosis, prognosis, and proactive management of industrial systems. There is a special focus on digitally enabled asset management and covers several topics such as condition monitoring, maintenance, structural health monitoring, non-destructive testing and other allied areas. Bringing together expert contributions from academia and industry, this book will be a valuable resource for those interested in latest condition monitoring and asset management techniques.
Download or read book Diagnostic Communication with Road Vehicles and Non Road Mobile Machinery written by Peter Subke and published by SAE International. This book was released on 2019-03-01 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diagnostic Communication with Road-Vehicles and Non-Road Mobile Machinery examines the communication between a diagnostic tester and E/E systems of road-vehicles and non-road mobile machinery such as agricultural machines and construction equipment. The title also contains the description of E/E systems (control units and in-vehicle networks), the communication protocols (e.g. OBD, J1939 and UDS on CAN / IP), and a glimpse into the near future covering remote, cloud-based diagnostics and cybersecurity threats.
Download or read book Proceedings of the 10th World Congress on Engineering Asset Management WCEAM 2015 written by Kari T. Koskinen and published by Springer. This book was released on 2016-03-25 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises refereed papers from the 10th World Congress on Engineering Asset Management (WCEAM 2015), held in Tampere, Finland in September 2015. These proceedings include a compilation of state-of-the-art papers covering a comprehensive range of subjects equally relevant to business managers and engineering professionals alike. With a focus on various aspects of engineering asset management ranging from strategic level issues to detail-level machine health issues, these papers address both industry and public sector concerns and issues, as well as advanced academic research. Proceedings of the WCEAM 2015 is an excellent reference and resource for asset management practitioners, researchers and academics, as well as undergraduate and postgraduate students at tertiary institutions or in the industry.
Download or read book Handbook of Technical Diagnostics written by Horst Czichos and published by Springer Science & Business Media. This book was released on 2013-01-11 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents concepts, methods and techniques to examine symptoms of faults and failures of structures, systems and components and to monitor functional performance and structural integrity. The book is organized in five parts. Part A introduces the scope and application of technical diagnostics and gives a comprehensive overview of the physics of failure. Part B presents all relevant methods and techniques for diagnostics and monitoring: from stress, strain, vibration analysis, nondestructive evaluation, thermography and industrial radiology to computed tomography and subsurface microstructural analysis. Part C cores the principles and concepts of technical failure analysis, illustrates case studies, and outlines machinery diagnostics with an emphasis on tribological systems. Part D describes the application of structural health monitoring and performance control to plants and the technical infrastructure, including buildings, bridges, pipelines, electric power stations, offshore wind structures, and railway systems. And finally, Part E is an excursion on diagnostics in arts and culture. The book integrates knowledge of basic sciences and engineering disciplines with contributions from research institutions, academe, and industry, written by internationally known experts from various parts of the world, including Europe, Canada, India, Japan, and USA.
Download or read book Servitization and Physical Asset Management written by Michael John Provost and published by SAE International. This book was released on 2018-12-31 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Servitization and Physical Asset Management, third edition, was developed to provide a structured source of guidance and reference information on the business opportunities linked to servitization and the management of physical assets. A growing trend in the global economy, servitization focuses on the actual deliverables of an asset from the perspective of the customer: electricity instead of the power plant, thrust instead of the engine, mobility instead of a plane or a car. The book offers high-level overviews of how to servitized and manage assets from a variety of perspectives, reviewing nearly 1,500 books, magazine articles, papers and presentations and websites. Written by Michael J. Provost, Ph.D., and a subject matter expert in modeling, simulation, analysis and condition monitoring, Servitization and Physical Asset Management, third edition, is an invaluable reference to those considering providing asset management services for the products they design and manufacture. It is also meant to support middle management wishing to know what needs to be done to look after the assets they are responsible for and who to approach for help, and academics doing research in this field. Michael Provost, is a British engineer with a doctoral degree in thermal power from Cranfield University.
Download or read book Safety and Reliability Theory and Applications written by Marko Cepin and published by CRC Press. This book was released on 2017-06-14 with total page 6847 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety and Reliability – Theory and Applications contains the contributions presented at the 27th European Safety and Reliability Conference (ESREL 2017, Portorož, Slovenia, June 18-22, 2017). The book covers a wide range of topics, including: • Accident and Incident modelling • Economic Analysis in Risk Management • Foundational Issues in Risk Assessment and Management • Human Factors and Human Reliability • Maintenance Modeling and Applications • Mathematical Methods in Reliability and Safety • Prognostics and System Health Management • Resilience Engineering • Risk Assessment • Risk Management • Simulation for Safety and Reliability Analysis • Structural Reliability • System Reliability, and • Uncertainty Analysis. Selected special sessions include contributions on: the Marie Skłodowska-Curie innovative training network in structural safety; risk approaches in insurance and fi nance sectors; dynamic reliability and probabilistic safety assessment; Bayesian and statistical methods, reliability data and testing; oganizational factors and safety culture; software reliability and safety; probabilistic methods applied to power systems; socio-technical-economic systems; advanced safety assessment methodologies: extended Probabilistic Safety Assessment; reliability; availability; maintainability and safety in railways: theory & practice; big data risk analysis and management, and model-based reliability and safety engineering. Safety and Reliability – Theory and Applications will be of interest to professionals and academics working in a wide range of industrial and governmental sectors including: Aeronautics and Aerospace, Automotive Engineering, Civil Engineering, Electrical and Electronic Engineering, Energy Production and Distribution, Environmental Engineering, Information Technology and Telecommunications, Critical Infrastructures, Insurance and Finance, Manufacturing, Marine Industry, Mechanical Engineering, Natural Hazards, Nuclear Engineering, Offshore Oil and Gas, Security and Protection, Transportation, and Policy Making.
Download or read book Diagnostics and Prognostics of Engineering Systems Methods and Techniques written by Kadry, Seifedine and published by IGI Global. This book was released on 2012-09-30 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Prognostics predicts an industrial systems lifespan using probability measurements to determine the way a machine operates. Prognostics are essential in determining being able to predict and stop failures before they occur. Therefore the development of dependable prognostic procedures for engineering systems is important to increase the systems performance and reliability. Diagnostics and Prognostics of Engineering Systems: Methods and Techniques provides widespread coverage and discussions on the methods and techniques of diagnosis and prognosis systems. Including practical examples to display the methods effectiveness in real-world applications as well as the latest trends and research, this reference source aims to introduce fundamental theory and practice for system diagnosis and prognosis.
Download or read book Proactive Condition Monitoring of Low Speed Machines written by Zhaklina Stamboliska and published by Springer. This book was released on 2014-11-15 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book broadens readers’ understanding of proactive condition monitoring of low- speed machines in heavy industries. It focuses on why low-speed machines are different than others and how maintenance of these machines should be implemented with particular attention. The authors explain the best available monitoring techniques for various equipment and the principle of how to get proactive information from each technique. They further put forward possible strategies for application of FEM for detection of faults and technical assessment of machinery. Implementation phases are described and industrial case studies of proactive condition monitoring are included. Proactive Condition Monitoring of Low-Speed Machines is an essential resource for engineers and technical managers across a range of industries as well as design engineers working in industrial product development.
Download or read book A Process Centric View on Predictive Maintenance and Fleet Prognostics Development of a Process Reference Model and a Development Method for Fleet Prognostics to Guide Predictive Maintenance Projects written by Carolin Wagner and published by Logos Verlag Berlin GmbH. This book was released on 2022-08-12 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the age of digitalization and the fourth industrial revolution, predictive maintenance is becoming increasingly important as a proactive maintenance type. Despite the economic benefits that predictive maintenance generates for companies, its practical application is still in its early stages. This is often due to two prevailing challenges. First, there is a deficiency of knowledge about predictive maintenance and its concrete realization. Second, there is a lack of high quality and rich data of historical machine failures. To increase the representativeness of data, data from several similar machines (i.e. a fleet) should be considered. To foster the effective implementation of predictive maintenance, supportive guidance in the realization of a predictive maintenance project is needed. For this reason, this dissertation presents a process reference model and a development method for fleet prognostics. The process reference model describes a comprehensive and application-independent view of the complete predictive maintenance process. The model is supplemented by the fleet prognostic development method. To address the specific characteristics of the fleet, a systematic process is depicted which provides a means to assess the heterogeneity of the fleet from a data-driven perspective and simplifies the design of an algorithm considering fleet data. Finally, the applicability and value of the research results are demonstrated with three industrial cases
Download or read book Advanced Information Systems Engineering Workshops written by Henderik A. Proper and published by Springer. This book was released on 2019-05-23 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed proceedings of three international workshops held in Rome, Italy, in June 2019, associated with the 31st International Conference on Advanced Information Systems Engineering, CAiSE 2019. These workshops were: COGNISE, The 7th International Workshop on Cognitive Aspects of Information Systems Engineering KET4DF, First International Workshop on Key Enabling Technologies for Digital Factories BIOC&FAISE, Joint Workshop on Blockchains for Inter-Organizational Collaboration and Felxible Advanced Information Systems The total of 19 papers presented in this volume were carefully reviewed and selected from 39 submissions.
Download or read book IoT and Spacecraft Informatics written by K.L. Yung and published by Elsevier. This book was released on 2022-03-29 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: IoT and Spacecraft Informatics provides the theory and applications of IoT systems in the design, development and operation of spacecraft. Sections present a high-level overview of IoT and introduce key concepts needed to successfully design IoT solutions, key technologies, protocols, and technical building blocks that combine into complete IoT solutions. The book features the latest advances, findings and state-of-the-art in research, case studies, development and implementation of IoT technologies for spacecraft and space systems. In addition, it concentrates on different aspects and techniques to achieve automatic control of spacecraft. This book is for researchers, PhD students, engineers and specialists in aerospace engineering as well as those in computer science, computer engineering or mechatronics. - Presents state-of-the-art research on IoT and spacecraft technology - Provides artificial intelligence-based solutions and robotics for space exploration applications - Introduces new applications and case studies of IoT and spacecraft informatics
Download or read book Engineering Asset Management 2011 written by Jay Lee and published by Springer Science & Business Media. This book was released on 2013-07-30 with total page 691 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text represents state-of-the-art trends and developments in the emerging field of engineering asset management as presented at the Sixth World Congress on Engineering Asset Management (WCEAM) held in Cincinnati, OH, USA from October 3-5, 2011 The Proceedings of the WCEAM 2011 is an excellent reference for practitioners, researchers and students in the multidisciplinary field of asset management, covering topics such as: Asset condition monitoring and intelligent maintenance; Asset data warehousing, data mining and fusion; Asset performance and level-of-service models; Design and lifecycle integrity of physical assets; Deterioration and preservation models for assets; Education and training in asset management; Engineering standards in asset management; Fault diagnosis and prognostics; Financial analysis methods for physical assets; Human dimensions in integrated asset management; Information quality management; Information systems and knowledge management; Intelligent maintenance; Intelligent sensors and devices; Maintenance strategies in asset management; Optimization decisions in asset management; Prognostics & Health Management; Risk management in asset management; Strategic asset management; and Sustainability in asset management.
Download or read book Risk Reliability and Safety Innovating Theory and Practice written by Lesley Walls and published by CRC Press. This book was released on 2016-11-25 with total page 4767 pages. Available in PDF, EPUB and Kindle. Book excerpt: The safe and reliable performance of many systems with which we interact daily has been achieved through the analysis and management of risk. From complex infrastructures to consumer durables, from engineering systems and technologies used in transportation, health, energy, chemical, oil, gas, aerospace, maritime, defence and other sectors, the management of risk during design, manufacture, operation and decommissioning is vital. Methods and models to support risk-informed decision-making are well established but are continually challenged by technology innovations, increasing interdependencies, and changes in societal expectations. Risk, Reliability and Safety contains papers describing innovations in theory and practice contributed to the scientific programme of the European Safety and Reliability conference (ESREL 2016), held at the University of Strathclyde in Glasgow, Scotland (25—29 September 2016). Authors include scientists, academics, practitioners, regulators and other key individuals with expertise and experience relevant to specific areas. Papers include domain specific applications as well as general modelling methods. Papers cover evaluation of contemporary solutions, exploration of future challenges, and exposition of concepts, methods and processes. Topics include human factors, occupational health and safety, dynamic and systems reliability modelling, maintenance optimisation, uncertainty analysis, resilience assessment, risk and crisis management.
Download or read book Digital Twins Simulation and the Metaverse written by Michael Grieves and published by Springer Nature. This book was released on with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book GB T 2013 GB 2013 Chinese National Standard PDF English Catalog year 2013 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2020-06-06 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides the comprehensive list of Chinese National Standards - Category: GB, GB/T Series of year 2013.
