Download or read book Concrete Structures Part II 4th Ed written by Zahid Ahmad Siddiqi and published by Zahid Ahmad Siddiqi. This book was released on 2020-05-11 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is prepared according to the 2019 ACI Code for buildings and 2007 AASHTO LRFD Specifications for bridges. The units used throughout the presentation are the SI units according to the official system of units in Pakistan. As in Part-I of the same series of books, it is tried that the three main phases of structural design, namely load determination, design calculations and detailing are together introduced to the beginner. In this set of two books, besides the usual reinforced concrete design, retaining walls, yield line and strip method of slab design, slabs-on-grade, moment-curvature relationships, water retaining structures, prestressed concrete, dome design, special types of stairs, machine foundations, pipe design for D-load, bridge super-structure design, bridge sub-structure design, ordinary RC wall subjected to in-plane and out-of-plane bending, special RC wall, coupling beam, basics of formwork design, plain concrete properties and repair / rehabilitation of concrete structures are also presented. This book is useful with the 1st part of the same book.
Download or read book Concrete Structures Part I written by Zahid Ahmad Siddiqi and published by Zahid Ahmad Siddiqi. This book was released on 2020-02-01 with total page 853 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is prepared according to the ACI Code 2019 for buildings and AASHTO LRFD Specifications for Bridges 2007. The units used throughout the presentation are the SI units, however, the expressions and examples are also given in US Customary units in the starting chapters to keep continuity with the traditional system of units. It is tried that the three main phases of structural design, namely load determination, design calculations and detailing are introduced to the beginner. This book is useful with the 2nd part of the same book. The comments on the previous editions of the book sent by colleagues, fellow engineers and students are incorporated in this edition. All persons who contributed in this regard are greatly acknowledged. Suggestions for further improvement of the presentation will be appreciated and will be incorporated in the future editions.
Download or read book Concrete Structures Part II 2nd Edition written by Zahid Ahmad Siddiqi and published by Zahid Ahmad Siddiqi. This book was released on 2012-02-22 with total page 763 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is prepared according to the 2011 ACI Code for buildings and AASHTO LRFD Specifications for bridges. The units used throughout the presentation are the SI units according to the official system of units in Pakistan. As in Part-I of the same series of books, it is tried that the three main phases of structural design, namely load determination, design calculations and detailing together are introduced to the beginner. Besides reinforced concrete design, basics of formwork design, plain concrete properties and repair / rehabilitation of concrete structures are also presented. This book is useful with the 1st part of the same book. Suggestions for further improvement of the presentation will be highly appreciated and will be incorporated in the future editions.
Download or read book Concrete Structures written by Mehdi Setareh and published by Springer. This book was released on 2016-08-13 with total page 693 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised, fully updated second edition covers the analysis, design, and construction of reinforced concrete structures from a real-world perspective. It examines different reinforced concrete elements such as slabs, beams, columns, foundations, basement and retaining walls and pre-stressed concrete incorporating the most up-to-date edition of the American Concrete Institute Code (ACI 318-14) requirements for the design of concrete structures. It includes a chapter on metric system in reinforced concrete design and construction. A new chapter on the design of formworks has been added which is of great value to students in the construction engineering programs along with practicing engineers and architects. This second edition also includes a new appendix with color images illustrating various concrete construction practices, and well-designed buildings. The ACI 318-14 constitutes the most extensive reorganization of the code in the past 40 years. References to the various sections of the ACI 318-14 are provided throughout the book to facilitate its use by students and professionals. Aimed at architecture, building construction, and undergraduate engineering students, the scope of concepts in this volume emphasize simplified and practical methods in the analysis and design of reinforced concrete. This is distinct from advanced, graduate engineering texts, where treatment of the subject centers around the theoretical and mathematical aspects of design. As in the first edition, this book adopts a step-by-step approach to solving analysis and design problems in reinforced concrete. Using a highly graphical and interactive approach in its use of detailed images and self-experimentation exercises, “Concrete Structures, Second Edition,” is tailored to the most practical questions and fundamental concepts of design of structures in reinforced concrete. The text stands as an ideal learning resource for civil engineering, building construction, and architecture students as well as a valuable reference for concrete structural design professionals in practice.
Download or read book Concrete Microstructure Properties and Materials written by P. Mehta and published by McGraw Hill Professional. This book was released on 2005-09-26 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook presents the art and science of concrete in a simple, clear, hands-on manner, focusing on the following: Cement and concrete are predicted to be the premier building material of the 21st Century; Includes unique diagrams, photographs, and summary tables; Updated to include new chapters on non-destructive methods for concrete; future challenges in concrete technology; an increased number of examples of concrete applications; and new developments in durability.
Download or read book Design Of Reinforcement Concrete Structure 4 ed written by P. Dayaratnam and published by . This book was released on 2000 with total page 805 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Precast Concrete Structures written by Alfred Steinle and published by John Wiley & Sons. This book was released on 2019-05-06 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building with precast concrete elements is one of the most innovative forms of construction. This book serves as an introduction to this topic, including examples, and thus supplies all the information necessary for conceptual and detailed design.
Download or read book Reinforced Concrete Structures Analysis and Design written by David D. E. E. Fanella and published by McGraw Hill Professional. This book was released on 2010-12-06 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: A PRACTICAL GUIDE TO REINFORCED CONCRETE STRUCTURE ANALYSIS AND DESIGN Reinforced Concrete Structures explains the underlying principles of reinforced concrete design and covers the analysis, design, and detailing requirements in the 2008 American Concrete Institute (ACI) Building Code Requirements for Structural Concrete and Commentary and the 2009 International Code Council (ICC) International Building Code (IBC). This authoritative resource discusses reinforced concrete members and provides techniques for sizing the cross section, calculating the required amount of reinforcement, and detailing the reinforcement. Design procedures and flowcharts guide you through code requirements, and worked-out examples demonstrate the proper application of the design provisions. COVERAGE INCLUDES: Mechanics of reinforced concrete Material properties of concrete and reinforcing steel Considerations for analysis and design of reinforced concrete structures Requirements for strength and serviceability Principles of the strength design method Design and detailing requirements for beams, one-way slabs, two-way slabs, columns, walls, and foundations
Download or read book LRFD Steel Design Aids 4th Edition written by Zahid Ahmad Siddiqi and published by Zahid Ahmad Siddiqi. This book was released on 2018-01-15 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: After the publication of the third edition of this book, new AISC Specification was released in 2010 that contains combined provisions for ASD and ARFD methods and formulas in non-dimensional format to be used both for the FPS and the SI units. This fourth edition is prepared after revising the original book in the light of the new Specification of AISC 2016. The book contains tables required for the 345 Grade Steel and BS sections. The author is highly thankful to all the engineers and students who have participated in the improvement of this book through their questions and queries. As before, the detailed design procedure of the steel structures is explained in a separate book titled “Steel Structures” which frequently refers to this book for the properties tables and the design aids. Suggestions for further improvement of the presentation will be highly appreciated and will be incorporated in the future editions.
Download or read book Steel Structures 4th Edition written by Zahid Ahmad Siddiqi and published by Zahid Ahmad Siddiqi. This book was released on 2017-03-14 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: At the end of year 2005, new AISC Specification was released that contained formulas for both Allowable Stress Design and Load and Resistance Factor Design in non-dimensional format to be used for both the FPS and SI units. In year 2010, this specification for steel structures design and the seismic provisions were updated. This specification was further revised in 2016. This book is prepared in the light of the new Specifications. AASHTO LRFD Specifications are used to present the concepts of bridge loading and the design procedure. As in the first edition, in place of explaining the various aspects of design such as checking various strength capacities, stability requirements and serviceability limits in separate chapters, complete design including all the major steps of design are presented in individual units for various types of members. It is expected that this procedure gives true picture of design process to the beginners and the practicing engineers. This book is more useful if it is used along with another publication “LRFD Steel Design Aids”, termed as Design Aids in this book. The flow charts given in different sections of this book may easily be computerized to get custom-made computer programs for personal use. International system of units (SI) is used throughout the book. Suggestions for further improvement of the presentation will be highly appreciated and will be incorporated in the future editions.
Download or read book Civil Structural Engineering written by Alan Williams and published by Kaplan AEC Engineering. This book was released on 2004 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Everything civil and structural engineers in California need to prepare for the seismic design topics of the Special Civil Engineering Exam and California Structural Engineering Exam. This guide emphasizes methods that lead to the quickest and simplest solution to any problem.
Download or read book Reinforced and Prestressed Concrete Design to EC2 written by Eugene Obrien and published by CRC Press. This book was released on 2017-09-01 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete is an integral part of twenty-first century structural engineering, and an understanding of how to analyze and design concrete structures is a vital part of training as a structural engineer. With Eurocode legislation increasingly replacing British Standards, it’s also important to know how this affects the way you can work with concrete. Newly revised to Eurocode 2, this second edition retains the original’s emphasis on qualitative understanding of the overall behaviour of concrete structures. Now expanded, with a new chapter dedicated to case studies, worked examples, and exercise examples, it is an even more comprehensive guide to conceptual design, analysis, and detailed design of concrete structures. The book provides civil and structural engineering students with complete coverage of the analysis and design of reinforced and prestressed concrete structures. Great emphasis is placed on developing a qualitative understanding of the overall behaviour of structures.
Download or read book Structural Concrete written by M. Nadim Hassoun and published by John Wiley & Sons. This book was released on 2012-06-14 with total page 1034 pages. Available in PDF, EPUB and Kindle. Book excerpt: The popular, easily accessible guide to the design of reinforced concrete structures now updated and revised Structural Concrete, Fifth Edition provides complete guidance to the analysis and design of reinforced and prestressed concrete structures. This new edition brings all material up to date while maintaining the book's practical, logical, easy-to-follow approach. Coverage includes the latest ACI 318 - 11 code rules, emphasizing the code's strength approach and strain limits. Additional codes, standards, and specifications, as well as material properties and specific loads and safety provisions are also examined in detail. Drawing on decades of experience in industry and academia, the authors include numerous SI unit examples and design tables along with step-by-step instructions on how to analyze and design for each type of structural member. They clearly explain all key concepts one should know before tackling design formulas, and supplement the discussion with helpful end-of-chapter summaries, references, and problems. New and updated material in this edition includes: The application of shear design to beams with variable length in actual structure The design of deep beams employing ACI and AASHTO strut-and-tie approach The design of stepped-type reinforced concrete stairs, not covered anywhere else Seismic design and analysis utilizing the IBC 2012 and ASCE 7-10 code The design of curved beams subject to flexure, shear, and torsion Prestressed concrete bridge design according to AASHTO specifications Examples for predicting shrinkage and creep of concrete in both U.S. and SI units Structural Concrete, Fifth Edition arms civil and structural engineers with a complete set of tools for designing concrete structures with confidence. It is also an excellent resource for students of civil engineering.
Download or read book Design of Prestressed Concrete written by Nilson and published by Wiley. This book was released on 1987-04-13 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Precast Concrete Structures written by Kim S. Elliott and published by CRC Press. This book was released on 2019-08-08 with total page 823 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of Precast Concrete Structures introduces the conceptual design ideas for the prefabrication of concrete structures and presents a number of worked examples that translate designs from BS 8110 to Eurocode EC2, before going into the detail of the design, manufacture, and construction of precast concrete multi-storey buildings. Detailed structural analysis of precast concrete and its use is provided and some details are presented of recent precast skeletal frames of up to forty storeys. The theory is supported by numerous worked examples to Eurocodes and European Product Standards for precast reinforced and prestressed concrete elements, composite construction, joints and connections and frame stability, together with extensive specifications for precast concrete structures. The book is extensively illustrated with over 500 photographs and line drawings.
Download or read book Reinforced Concrete Structures written by Robert Park and published by John Wiley & Sons. This book was released on 1991-01-16 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sets out basic theory for the behavior of reinforced concrete structural elements and structures in considerable depth. Emphasizes behavior at the ultimate load, and, in particular, aspects of the seismic design of reinforced concrete structures. Based on American practice, but also examines European practice.
Download or read book Post Tensioned Concrete Principles and Practice Third Edition written by K. Dirk Bondy and published by Lulu.com. This book was released on 2017-08-08 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book combines history with academic notes for use at the university level, presenting design examples from actual jobs with applications and detailing for the practicing engineer. Chapter 1 tells the history of post-tensioned concrete as only Ken Bondy can tell it. Chapters 2-8 are the notes Dirk Bondy uses to teach Design of Prestressed Concrete Structures at UCLA and Cal Poly-San Luis Obispo. Chapters 9-13 are design examples that address many of the decisions faced by practicing engineers on typical projects. Chapters 13-14 cover the art of detailing and observing the construction of post-tensioned concrete. This knowledge was obtained over many years of working on our own projects and listening and learning from the the pioneers of post-tensioned concrete. Chapter 15 covers the slab on grade industry, which represents more sales of post-tensioning tendons than all other post-tensioning applications combined. Chapter 16 discusses the challenging application of post-tensioning-external post-tensioning.
