Download or read book Concrete Repair Rehabilitation and Retrofitting IV written by Frank Dehn and published by CRC Press. This book was released on 2015-09-18 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Fourth International Conference on Concrete Repair, Rehabilitation and Retrofitting (ICCRRR 2015) was held 5-7 October 2015 in Leipzig, Germany. This conference is a collaborative venture by researchers from the South African Research Programme in Concrete Materials (based at the Universities of Cape Town and The Witwatersrand) and the Material Science Group at Leipzig University and The Leipzig Institute for Materials Research and Testing (MFPA) in Germany. ICCRRR 2015 continues to seek and to extend a sound base of theory and practice in repair and rehabilitation, through both theoretical andexperimental studies, and through good case study literature. Two key aspects need to be addressed: that of developing sound and easily applied standard practices for repair, possibly codified, and the need to study seriously the service performance of repaired structures and repair systems. In fact, without making substantial efforts to implement the latter goal, much of the effort in repair and rehabilitation may prove to be less than economical or satisfactory. The conference proceedings contain papers presented at the conference which can be grouped under the six main themes of (i) Concrete durability aspects, (ii) Condition assessment of concrete structures, (iii) Modern materials technology, (iv) Concrete repair, rehabilitation and retrofitting, (v) Performance and health monitoring and (vi) Education, research and specifications. The large number of high quality papers presented and the wide range of relevant topics covered confirm that these proceedings will be a valued reference for many working in this important field and that they will form a suitable base for discussion and provide suggestions for future development and research. Set of book of abstracts (244 pp) and a searchable full paper CD-ROM (1054 pp).
Download or read book Concrete Repair Rehabilitation and Retrofitting IV written by Frank Dehn and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Concrete Repair Rehabilitation and Retrofitting written by M. Alexander and published by CRC PressI Llc. This book was released on 2006-01-01 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: The First International Conference on Concrete Repair, Rehabilitation and Retrofitting (ICCRRR 2005) was held in Cape Town, South Africa, in November 2005. The conference was a collaborative venture by researchers from the South African Research Programme in Concrete Materials (based at the Universities of Cape Town and The Witwatersrand) and The Construction Materials Section at Leipzig University in Germany. The conference focused on appropriate repairing, maintaining, rehabilitating, and, if necessary, retrofitting existing infrastructure with a view to extending its life and maximising its economic return.
Download or read book Concrete Repair Rehabilitation and Retrofitting IV written by Frank Dehn and published by CRC Press. This book was released on 2015-09-17 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Fourth International Conference on Concrete Repair, Rehabilitation and Retrofitting (ICCRRR 2015) was held 5-7 October 2015 in Leipzig, Germany. This conference is a collaborative venture by researchers from the South African Research Programme in Concrete Materials (based at the Universities of Cape Town and The Witwatersrand) and the Material
Download or read book Concrete Repair Rehabilitation and Retrofitting III written by and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Concrete Repair Rehabilitation and Retrofitting III written by Mark G. Alexander and published by CRC Press. This book was released on 2012-08-21 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume consists of papers focusing on repairing, maintaining, rehabilitating, and retrofitting of existing infrastructures to extend their life and maximize economic return. Moreover, structural performance and material durability are discussed. Contributions fall under the following headings: (i) Concrete durability aspects, (ii) Condition assessment of concrete structures, (iii) Modern materials technology, (iv) Concrete repair, rehabilitation and retrofitting, (v) Performance and health monitoring, and (vi) Education, research and specifications. Major attention is paid to innovative materials for durable concrete construction, integrated service life modelling of reinforced concrete structures, NDE/NDT and measurement techniques, repair methods and materials, and structural strengthening and retrofitting techniques. For researchers and practitioners in structure and infrastructure engineering. Set of book of abstracts (546 pp) and a searchable full paper CD-ROM (1564 pp).
Download or read book Concrete Structure Repair Rehab Retrofit written by Bhattacharjee and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Concrete Repair Rehabilitation and Retrofitting written by Mark G. Alexander and published by Taylor & Francis Group. This book was released on 2005-11 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Decision Based Design written by Vijitashwa Pandey and published by CRC Press. This book was released on 2013-08-26 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a presentation that formalizes what makes up decision based design, Decision Based Design defines the major concepts that go into product realization. It presents all major concepts in design decision making in an integrated way and covers the fundamentals of decision analysis in engineering design. It also trains engineers to understand the impacts of design decision. The author teaches concepts in demand modeling and customer preference modeling and provides examples. This book teaches most fundamental concepts encountered in engineering design like: concept generation, multiattribute decision analysis, reliability engineering, design optimization, simulation, and demand modeling. The book provides the tools engineering practitioners and researchers need to first understand that engineering design is best viewed as a sequence of decisions made by the stakeholders involved and then apply the decision based design concepts in practice. It teaches fundamental concepts encountered in engineering design, such as concept generation, multiattribute decision analysis, reliability engineering, design optimization, simulation, and demand modeling. This book helps students and practitioners understand that there is a rigorous way to analyze engineering decisions taking into consideration all the potential technical and business impacts of their decisions. It can be used in its entirety to teach a course in decision based design, while selected chapters can also be used to cover courses in subdisciplines that make up decision based design.
Download or read book Concrete Structures written by R. Dodge Woodson and published by Butterworth-Heinemann. This book was released on 2009-07-13 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction. Chapter 1 Chemistry of Concrete. Chapter 2 Evaluation of the Concrete in Concrete Structures. Chapter 3 Non-destructive Testing Methods. Chapter 4 Causes of Distress and Deterioration of Concrete. Chapter 5 Planning and Design of Concrete Repair. Chapter 6 Self Repair Concrete. Chapter 7 Concrete Removal and Preparation for Repair. Chapter 8 Materials and Methods for Repair and Rehabilitation. Chapter 9 Maintenance of Concrete. Chapter 10 Specialized Repairs. Concrete 11 Investigation Reports Appendix A References. Appendix B Glossary.
Download or read book Concrete Repair Rehabilitation and Retrofitting II written by Mark G. Alexander and published by CRC Press. This book was released on 2008-11-13 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Second International Conference on Concrete Repair, Rehabilitation and Retrofitting (ICCRRR 2005) was held in Cape Town, South Africa, from 24-26 November 2008. The Conference followed the very successful First International Conference, also in Cape Town in 2005, and continued as a collaborative venture by researchers from the South African Res
Download or read book Concrete Solutions written by Michael Grantham and published by CRC Press. This book was released on 2016-09-19 with total page 1364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete Solutions contains the contributions from some 30 countries to Concrete Solutions, the 6th International Conference on Concrete Repair (Thessaloniki, Greece, 20-23 June 2016). Strengthening and retrofitting are major themes in this volume, with NDT and electrochemical repair following closely, discussing the latest advances and technologies in concrete repair. The book brings together some interesting and challenging theoretical approaches and questions if we really understand and approach such topics as corrosion monitoring correctly. Concrete Solutions is an essential reference work for those working in the concrete repair field, from engineers to architects and from students to clients. The Concrete Solutions Series of international conferences on concrete repair began in 2003 with a conference held in St. Malo, France in association with INSA Rennes. Subsequent conferences have seen the Series partnering with the University of Padua (Italy) in 2009, with TU Dresden (Germany) in 2011 and with Queen’s University Belfast (Northern Ireland) in 2014. In 2016 Thessaloniki (Greece) hosted the conference, partnering with both Aristotle University of Thessaloniki (AUTH) and Democritus University of Thrace (DUTH). The next conference in the series will be held in 2019 in Istanbul.
Download or read book Rehabilitation Of Concrete Structures written by Dr. B. Vidivelli and published by . This book was released on 2007-01-01 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: PART 1: DURABILITY AND DETERIORATION: Physical Cause* Corrosion* PART 2: DAMAGE ASSESSMENT: Destructive Testing Systems* Non-Destructive Testing Systems* Semi-Detructive Testiing Systems* PART 3: REPAIR MATERIALS: Selection and Evaluation of Repair Materials* Fuction of Repair Materials* Special Repair Materials* PART 4: REPAIR ND REHABILATION: Repair of Cracks* Rehabilitation Techniques* Strengthening Techniques* PART 5: MAINTENANCE AND DEMOLITION: Maintence Classification And Process* Maintenance Procedurte* Safety In Maintenance And Demolition* Index.
Download or read book Materials Characterisation IV written by Andrea Alberto Mammoli and published by WIT Press. This book was released on 2009 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until recently, engineering materials could be characterised successfully using relatively simple testing procedures. As materials technology advances, interest is growing in materials possessing complex meso-, micro- and nano-structures, which to a large extent determine their physical properties and behaviour. The purposes of materials modelling are many - optimisation, investigation of failure, simulation of production processes, to name a few. Modelling and characterisation are closely intertwined, increasingly so as the complexity of the material increases. Characterisation, in essence, is the connection between the abstract material model and the real-world behaviour of the material in question. Characterisation of complex materials therefore may require a combination of experimental techniques and computation. This book contains papers from the Fourth International Conference on Computational Methods and Experiments in Materials Characterisation which brought researchers who use computational methods, those who perform experiments, and of course those who do both, in all areas of materials characterisation, to discuss their recent results and ideas, in order to foster the multidisciplinary approach that has become necessary for the study of complex phenomena.
Download or read book Proceedings of the Second Workshop of the HORIZON 2020 CEBAMA Project KIT Scientific Reports 7752 written by Altmaier, M. and published by KIT Scientific Publishing. This book was released on 2019-03-22 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rehabilitation of Concrete Structures with Fiber Reinforced Polymer written by Riadh Al-Mahaidi and published by Butterworth-Heinemann. This book was released on 2018-11-12 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rehabilitation of Concrete Structures with Fiber Reinforced Polymer is a complete guide to the use of FRP in flexural, shear and axial strengthening of concrete structures. Through worked design examples, the authors guide readers through the details of usage, including anchorage systems, different materials and methods of repairing concrete structures using these techniques. Topics include the usage of FRP in concrete structure repair, concrete structural deterioration and rehabilitation, methods of structural rehabilitation and strengthening, a review of the design basis for FRP systems, including strengthening limits, fire endurance, and environmental considerations. In addition, readers will find sections on the strengthening of members under flexural stress, including failure modes, design procedures, examples and anchorage detailing, and sections on shear and torsion stress, axial strengthening, the installation of FRP systems, and strengthening against extreme loads, such as earthquakes and fire, amongst other important topics. Presents worked design examples covering flexural, shear, and axial strengthening Includes complete coverage of FRP in Concrete Repair Explores the most recent guidelines (ACI440.2, 2017; AS5100.8, 2017 and Concrete society technical report no. 55, 2012)
Download or read book Rheology of Fresh Cement Based Materials written by Qiang Yuan and published by CRC Press. This book was released on 2022-12-28 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces fundamentals, measurements, and applications of rheology of fresh cement-based materials. The rheology of a fresh cement-based material is one of its most important aspects, characterizing its flow and deformation, and governing the mixing, placement, and casting quality of a concrete. This is the first book to bring the field together on an increasingly important topic, as new types of cement-based materials and new concrete technologies are developed. It describes measurement equipment, procedures, and data interpretation of the rheology of cement paste and concrete, as well as applications such as self-compacting concrete, pumping, and 3D printing. A range of other cement-based materials such as fiber-reinforced concrete, cemented paste backfills, and alkali-activated cement are also examined. Rheology of Fresh Cement-Based Materials serves as a reference book for researchers and engineers, and a textbook for advanced undergraduate and graduate students.
