Download or read book Concrete Pavement Mixture Design and Analysis MDA written by Petter Taylor and published by . This book was released on 2015 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mixture proportioning is routinely a matter of using a recipe based on a previously produced concrete, rather than adjusting the proportions based on the needs of the mixture and the locally available materials. As budgets grow tighter and increasing attention is being paid to sustainability metrics, greater attention is beginning to be focused on making mixtures that are more efficient in their usage of materials yet do not compromise engineering performance. Therefore, a performance-based mixture proportioning method is needed to provide the desired concrete properties for a given project specification. The proposed method should be user friendly, easy to apply in practice, and flexible in terms of allowing a wide range of material selection. The objective of this study is to further develop an innovative performance-based mixture proportioning method by analyzing the relationships between the selected mix characteristics and their corresponding effects on tested properties. The proposed method will provide step-by-step instructions to guide the selection of required aggregate and paste systems based on the performance requirements. Although the provided guidance in this report is primarily for concrete pavements, the same approach can be applied to other concrete applications as well.
Download or read book Concrete Pavement Mixture Design and Analysis MDA written by Peter C. Taylor and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Any transportation infrastructure system is inherently concerned with durability and performance issues. The proportioning and uniformity control of concrete mixtures are critical factors that directly affect the longevity and performance of the Portland cement concrete pavement systems. At present, the only means available to monitor mix proportions of any given batch are to track batch tickets created at the batch plant. However, this does not take into account potential errors in loading materials into storage silos, calibration errors, and addition of water after dispatch. Therefore, there is a need for a rapid, cost-effective, and reliable field test that estimates the proportions of as-delivered concrete mixtures. In addition, performance based specifications will be more easily implemented if there is a way to readily demonstrate whether any given batch is similar to the proportions already accepted based on laboratory performance testing. The goal of the present research project is to investigate the potential use of a portable x-ray fluorescence (XRF) technique to assess the proportions of concrete mixtures as they are delivered. Tests were conducted on the raw materials, paste and mortar samples using a portable XRF device. There is a reasonable correlation between the actual and calculated mix proportions of the paste samples, but data on mortar samples was less reliable.
Download or read book Concrete Pavement Mixture Design and Analysis MDA written by Tyler Ley and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: For years, specifications have focused on the water to cement ratio (w/cm) and strength of concrete, despite the majority of the volume of a concrete mixture consisting of aggregate. An aggregate distribution of roughly 60% coarse aggregate and 40% fine aggregate, regardless of gradation and availability of aggregates, has been used as the norm for a concrete pavement mixture. Efforts to reduce the costs and improve sustainability of concrete mixtures have pushed owners to pay closer attention to mixtures with a well-graded aggregate particle distribution. In general, workability has many different variables that are independent of gradation, such as paste volume and viscosity, aggregate's shape, and texture. A better understanding of how the properties of aggregates affect the workability of concrete is needed. The effects of aggregate characteristics on concrete properties, such as ability to be vibrated, strength, and resistivity, were investigated using mixtures in which the paste content and the w/cm were held constant. The results showed the different aggregate proportions, the maximum nominal aggregate sizes, and combinations of different aggregates all had an impact on the performance in the strength, slump, and box test.
Download or read book Concrete Pavement Mixture Design and Analysis MDA written by Petter Taylor and published by . This book was released on 2015 with total page 45 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to the low workability of slipform concrete mixtures, the science of rheology is not strictly applicable for such concrete. However, the concept of rheological behavior may still be considered useful. A novel workability test method (Vibrating Kelly Ball or VKelly test) that would quantitatively assess the responsiveness of a dry concrete mixture to vibration, as is desired of a mixture suitable for slipform paving, was developed and evaluated. The objectives of this test method are for it to be cost-effective, portable, and repeatable while reporting the suitability of a mixture for use in slipform paving. Th e work to evaluate and refine the test was conducted in three phases: 1. Assess whether the VKelly test can signal variations in laboratory mixtures with a range of materials and proportions; 2. Run the VKelly test in the field at a number of construction sites; 3. Validate the VKelly test results using the Box Test developed at Oklahoma State University for slipform paving concrete. The data collected to date indicate that the VKelly test appears to be suitable for assessing a mixture's response to vibration (workability) with a low multiple operator variability. A unique parameter, VKelly Index, is introduced and defined that seems to indicate that a mixture is suitable for slipform paving when it falls in the range of 0.8 to 1.2 in./√s.
Download or read book Concrete Pavement Mixture Design and Analysis MDA written by Shiraz Tayabji and published by . This book was released on 2012 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide specification and commentary for concrete pavements presents current state-of-the art thinking with respect to materials and mixture selection, proportioning, and acceptance. This document takes into account the different environments, practices, and materials in use across the United States and allows optional inputs for local application. The following concrete pavement types are considered: jointed plain concrete pavement, the most commonly used pavement type and may be doweled or non-doweled at transverse joints; and continuously reinforced concrete pavement, typically constructed without any transverse joints, typically used for locations with high truck traffic loads and/or poor support conditions.
Download or read book Concrete Pavement Mixture Design and Analysis MDA written by Peter Taylor and published by . This book was released on 2015 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt: The stability of air bubbles in fresh concrete can have a profound influence of the potential durability of the system, because excessive losses during placement and consolidation can compromise the ability of the mixture to resist freezing and thawing. The stability of air void systems developed by some air entraining admixtures (AEAs) could be affected by the presence of some polycarboxylate-based water reducing admixtures (WRAs). The foam drainage test provides a means of measuring the potential stability of air bubbles in a paste. A barrier to acceptance of the test was that there was little investigation of the correlation with field performance. The work reported here was a limited exercise seeking to observe the stability of a range of currently available AEA/WRA combinations in the foam drainage test; then, to take the best and the worst and observe their stabilities on concrete mixtures in the lab. Based on the data collected, the foam drainage test appears to identify stable combinations of AEA and WRA.
Download or read book Concrete Pavement Mixture Design and Analysis MDA written by Peter Taylor and published by . This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This literature review focuses on factors influencing drying shrinkage of concrete. Although the factors are normally interrelated, they can be categorized into three groups: paste quantity, paste quality, and other factors.
Download or read book Concrete Pavement Mixture Design and Analysis MDA written by Ezgi Yurdakul and published by . This book was released on 2014 with total page 37 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete durability may be considered as the ability to maintain serviceability over the design life without significant deterioration, and is generally a direct function of the mixture permeability. Therefore, reducing permeability will improve the potential durability of a given mixture and, in turn, improve the serviceability and longevity of the structure. Given the importance of this property, engineers often look for methods that can decrease permeability. One approach is to add chemical compounds known as integral waterproofing admixtures or permeability-reducing admixtures, which help fill and block capillary pores in the paste. Currently, there are no standard approaches to evaluate the effectiveness of permeability-reducing admixtures or to compare different products in the US. A review of manufacturers' data sheets shows that a wide range of test methods have been used, and rarely are the same tests used on more than one product. This study investigated the fresh and hardened properties of mixtures containing commercially available hydrophilic and hydrophobic types of permeability-reducing admixtures. The aim was to develop a standard test protocol that would help owners, engineers, and specifiers compare different products and to evaluate their effects on concrete mixtures that may be exposed to hydrostatic or non-hydrostatic pressure. In this experimental program, 11 concrete mixtures were prepared with a fixed water-to-cement ratio and cement content. One plain mixture was prepared as a reference, 5 mixtures were prepared using the recommended dosage of the different permeability-reducing admixtures, and 5 mixtures were prepared using double the recommended dosage. Slump, air content, setting time, compressive and flexural strength, shrinkage, and durability indicating tests including electrical resistivity, rapid chloride penetration, air permeability, permeable voids, and sorptivity tests were conducted at various ages. The data are presented and recommendations for a testing protocol are provided.
Download or read book Concrete Pavement Mixture Design and Analysis MDA written by Tyler Ley and published by . This book was released on 2012 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete will suffer frost damage when saturated and subjected to freezing temperatures. Frost-durable concrete can be produced if a specialized surfactant, also known as an air-entraining admixture (AEA), is added during mixing to stabilize microscopic air voids. Small and well-dispersed air voids are critical to produce frost-resistant concrete. Work completed by Klieger in 1952 found the minimum volume of air required to consistently ensure frost durability in a concrete mixture subjected to rapid freezing and thawing cycles. He suggested that frost durability was provided if 18 percent air was created in the paste. This is the basis of current practice despite the tests being conducted on materials that are no longer available using tests that are different from those in use today. Based on the data presented, it was found that a minimum air content of 3.5 percent in the concrete and 11.0 percent in the paste should yield concrete durable in the ASTM C 666 with modern AEAs and low or no lignosulfonate water reducers (WRs). Limited data suggests that mixtures with a higher dosage of lignosulfonate will need about 1 percent more air in the concrete or 3 percent more air in the paste for the materials and procedures used. A spacing factor of 0.008 in. was still found to be necessary to provide frost durability for the mixtures investigated.
Download or read book Development of Performance Properties of Ternary Mixtures and Concrete Pavement Mixture Design and Analysis MDA written by Peter Taylor and published by . This book was released on 2012 with total page 57 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this study was to investigate the effect of cement paste quality on the concrete performance, particularly fresh properties, by changing the water-to-cementitious materials ratio (w/cm), type and dosage of supplementary cementitious materials (SCM), and airvoid system in binary and ternary mixtures. In this experimental program, a total matrix of 54 mixtures with w/cm of 0.40 and 0.45; target air content of 2%, 4%, and 8%; a fixed cementitious content of 600 pounds per cubic yard (pcy), and the incorporation of three types of SCMs at different dosages was prepared. The fine aggregate-to- total aggregate ratio was fixed at 0.42. Workability, rheology, air-void system, setting time, strength, Wenner Probe surface resistivity, and shrinkage were determined. The effects of paste variables on workability are more marked at the higher w/cm. The compressive strength is strongly influenced by the paste quality, dominated by w/cm and air content. Surface resistivity is improved by inclusion of Class F fly ash and slag cement, especially at later ages. Ternary mixtures performed in accordance with their ingredients. The data collected will be used to develop models that will be part of an innovative mix proportioning procedure.
Download or read book Asphalt Concrete Mix Design written by William Gartner and published by ASTM International. This book was released on 1989 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pavement Life Cycle Assessment written by Imad L. Al-Qadi and published by CRC Press. This book was released on 2017-04-11 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: An increasing number of agencies, academic institutes, and governmental and industrial bodies are embracing the principles of sustainability in managing their activities and conducting business. Pavement Life-Cycle Assessment contains contributions to the Pavement Life-Cycle Assessment Symposium 2017 (Champaign, IL, USA, 12-13 April 2017) and discusses the current status of as well as future developments for LCA implementation in project- and network-level applications. The papers cover a wide variety of topics: - Recent developments for the regional inventory databases for materials, construction, and maintenance and rehabilitation life-cycle stages and critical challenges - Review of methodological choices and impact on LCA results - Use of LCA in decision making for project selection - Implementation of case studies and lessons learned: agency perspectives - Integration of LCA into pavement management systems (PMS) - Project-level LCA implementation case studies - Network-level LCA applications and critical challenges - Use-phase rolling resistance models and field validation - Uncertainty assessment in all life-cycle stages - Role of PCR and EPDs in the implementation of LCA Pavement Life-Cycle Assessment will be of interest to academics, professionals, and policymakers involved or interested in Highway and Airport Pavements.
Download or read book A Manual for Design of Hot Mix Asphalt with Commentary written by and published by Transportation Research Board. This book was released on 2011 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pavement Engineering written by Rajib B. Mallick and published by CRC Press. This book was released on 2022-12-30 with total page 819 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pavement Engineering: Principles and Practice examines a wide range of topics in asphalt and concrete pavements from soil preparation and structural design to life cycle costing and economic analysis. This updated Fourth Edition covers all concepts and practices of pavement engineering in terms of materials, design, and construction methods for both flexible and rigid pavements and includes the latest developments in recycling, sustainable pavement materials, and resilient infrastructure. New and updated topics include material characterization concepts and tests, pavement management concepts, probabilistic examples of life cycle cost analysis, end-of-life considerations, waste plastic in asphalt, pervious concrete, pavement monitoring instrumentation and data acquisition, and more. The latest updated references, state of the art reviews, and online resources have also been included.
Download or read book Hot Mix Asphalt Materials Mixture Design and Construction written by Freddy L. Roberts and published by National Asphalt Pavement Association. This book was released on 1991 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book WisDOT Research Program written by and published by . This book was released on 2008 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Concrete Pavement Design Construction and Performance written by Norbert J. Delatte and published by CRC Press. This book was released on 2014-05-22 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of Concrete Pavement Design, Construction, and Performance provides a solid foundation for pavement engineers seeking relevant and applicable design and construction instruction. It relies on general principles instead of specific ones, and incorporates illustrative case studies and prime design examples to highlight the materia
