Download or read book Concrete Floor Slabs on Grade Subjected to Heavy Loads written by United States. Department of the Army and published by . This book was released on 1977 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Introduction to Concrete Floor Slabs on Grade Subjected to Heavy Loads written by J Paul Guyer and published by . This book was released on 2020-12-21 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for civil and structural engineers and construction managers interested in concrete floor slabs on grade subjected to heavy loads. Here is what is discussed:1. INTRODUCTION2. BASIS OF FLOOR SLAB ON GRADE DESIGN3. DETERMINATION OF FLOOR SLAB REQUIREMENTS4. SITE INVESTIGATION5. DESIGN PROCEDURE.
Download or read book Concrete Floor Slabs on Grade Subjected to Heavy Loads written by United States. Department of the Army and published by . This book was released on 1977 with total page 43 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Introduction to Concrete Floor Slabs on Grade Subjected to Heavy Loads written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2020-12-21 with total page 59 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for civil and structural engineers and construction managers interested in concrete floor slabs on grade subjected to heavy loads. Here is what is discussed: 1. INTRODUCTION 2. BASIS OF FLOOR SLAB ON GRADE DESIGN 3. DETERMINATION OF FLOOR SLAB REQUIREMENTS 4. SITE INVESTIGATION 5. DESIGN PROCEDURE.
Download or read book An Introduction to Concrete Floor Slabs on Grade Subjected to Heavy Loads written by J. Paul Guyer and published by . This book was released on 2016-10-18 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication provides introductory technical guidance for civil and structural engineers interested in learning how to design concrete slabs on grade subjected to heavy loads. Here is what is discussed: 1. INTRODUCTION, 2. BASIS OF FLOOR SLAB ON GRADE DESIGN, 3. DETERMINATION OF FLOOR SLAB REQUIREMENTS, 4. SITE INVESTIGATION, 5. DESIGN PROCEDURE
Download or read book Development of a Design Manual for Concrete Floor Slabs on Grade written by J. L. Rice and published by . This book was released on 1974 with total page 25 pages. Available in PDF, EPUB and Kindle. Book excerpt: The report describes a study preparing a design manual for concrete slabs on grade subjected to moderate to heavy loads. Existing design procedures were reviewed, theoretical studies were made, and an interim manual was prepared. Information in existing manuals was critically reviewed and applicable material used extensively in the preparation. Assumptions made in the manuals with regard to type and volume of vehicular traffic were re-examined on the basis of a field survey and revised when necessary. (Author).
Download or read book Slabs on Grade written by Mary Krumboltz Hurd and published by . This book was released on 1994 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Review of Rigid Pavement Design for Concrete Floor Slabs on Grade written by John C. Potter and published by . This book was released on 1986 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This paper documents changes to Technical Manual (TM) 5-809-12, 'Concrete Floor Slabs on Grade Subjected to Heavy Loads.' Changes to design criteria for thickness determination ... thickness versus coverage relationship ... Requirements for use of reinforcing steel ... have been revised to provide more flexibility and economy."--Abstract.
Download or read book An Introduction to Structural Design of Slabs on Grade for Professional Engineers written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2023-03-27 with total page 79 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for civil engineers, structural engineers and construction managers interested in design and construction of load-bearing slabs on grade. Here is what is discussed: 1. INTRODUCTION, 2. BASIS FOR DESIGN, 3. SERVICEABILITY, 4. SHINKAGE COMPENSATING CONCRETE, 5. POST-TENSIONED SLABS, 6. SPECIAL TESTS AND SPECIAL INSPECTIONS, 7. SLABS ON GRADE FOR HEAVY LOADS.
Download or read book Design and Construction of Concrete Slabs on Grade written by and published by . This book was released on 1986 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Technical Manual written by United States Department of the Army and published by . This book was released on 1980 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Seismic Considerations for Steel Storage Racks Located in Areas Accessible to the Public written by Federal Emergency Agency and published by FEMA. This book was released on 2013-04-03 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past few decades, the number of large public warehouse stores (often referred to as big-box stores) across the nation has grown significantly, changing both consumer buying habits and the public's risk of injury during earthquakes. During an earthquake, occupant safety in a big-box store depends on both the structural performance of the building and on the performance of the storage racks and their contents. Earthquake ground motions can cause storage racks to collapse or overturn if they are not properly designed, installed, maintained, and loaded. In addition, goods stored on the racks may spill or topple off. Both occurrences pose a life-safety risk to the exposed shopping public. The immediate stimulus for the project that resulted in this report was a 2003 request from the State of Washington to the Federal Emergency Management Agency (FEMA) for guidance concerning the life-safety risk posed by the storage racks in publicly accessible areas of retail stores, especially the risk of rack collapse of loss of stored goods during an earthquake. FEMA asked the Building Seismic Safety Council (BSSC) to develop the requested guidance. To do so, the BSSC established a Rack Project Task Group composed of practicing engineers, storage rack designers, researchers, representatives of the Rack Manufacturers Institute (RMI) and the Retail Industry Leaders Association, and members of applicable technical subcommittees responsible for updating the NEHRP Recommended Provisions. In developing this guidance document, the Task Group focused primarily on steel single selective pallet storage racks. It reviewed available information on storage rack performance during earthquakes and the background on the development of standards and code requirements for storage racks; assessed seismic requirements for storage racks and current practices with respect to rack design, maintenance and operations, quality assurance, and post-earthquake inspections; and examined available research and testing data. Based on its study, the Task Group developed short-term recommendations to improve current practice and formulated long-term recommendations to serve as the basis for improved standards documents such as the NEHRP Recommended Provisions, ASCE 7, and the RMI-developed storage rack specification. Over the near term, the Task Group recommends that the 2003 NEHRP Recommended Provisions requirements for steel single selective pallet storage rack design be followed and that connections be checked in accordance with a procedure to be developed by RMI. The Task Group also recommends that additional guidance presented in this report be voluntarily adopted by store owners and operators. Further, given the fact that maintenance and use of storage racks is a key element to their acceptable performance during earthquakes, store owners and operators should adopt an appropriate quality assurance plan; as a minimum, the best self-imposed practices of store owners and operators should be maintained. The Task Group's primary long-term recommendation is that the RMI specification be brought into conformance with the 2003 NEHRP Recommended Provisions, which is the basis for seismic requirements found in current seismic design standards and model building codes. The Task Group also recommends that optional performance-based and limit state procedures and component cyclic testing procedures be incorporated into the RMI-developed specification. Compliance with these procedures will demonstrate that the storage racks have the capacity to resist maximum considered earthquake ground motions without collapse. It also is recommended that regulatory bodies periodically review the quality assurance programs of stores and implement any regulations needed to satisfy life-safety concerns that relate to the securing of rack contents and rack maintenance and use.
Download or read book Design of Slabs on ground written by ACI Committee 360 and published by American Concrete Institute. This book was released on 2006 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Monthly Catalog of United States Government Publications written by United States. Superintendent of Documents and published by . This book was released on 1977 with total page 992 pages. Available in PDF, EPUB and Kindle. Book excerpt: February issue includes Appendix entitled Directory of United States Government periodicals and subscription publications; September issue includes List of depository libraries; June and December issues include semiannual index
Download or read book Guide for Concrete Floor and Slab Construction written by ACI Committee 302 and published by American Concrete Institute. This book was released on 2004 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ground Bearing Concrete Slabs written by John Knapton and published by Thomas Telford. This book was released on 2003-01-06 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive new reference work provides invaluable information to designers and specifiers throughout the design and construction project and beyond. It comprises guidance on all categories of ground bearing concrete.
Download or read book An Introduction to Slabs on Grade Subjected to Heavy Loads written by J. Paul Guyer and published by CreateSpace. This book was released on 2015-02-07 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication provides an introduction to design of slabs on grade subjected to heavy loads, such as equipment foundations. It may be of interest to civil, structural and mechanical engineers, and other professional engineers and construction managers.