Download or read book PC Based Instrumentation and Control written by Michael H. Tooley and published by Routledge. This book was released on 2005 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: . Save money and increase efficiency by using a standard PC platform to solve a wide variety of control, instrumentation and measurement problems . Designed for practicing engineers and technicians, this book is also ideal for educational courses in control, instrumentation and measurement . A companion website provides downloadable executables, source code, links to manufacturers and suppliers, and additional reference material PC Based Instrumentation and Control is a guide to implementing computer control, instrumentation and data acquisition using a standard PC and some of the most popular computer languages. Numerous sample applications, complete with examples of working circuits and representative software, make this a practical, hands-on guide to implementing a vast range of PC-based testing, measurement, and control systems. Advice is given on modifying the circuits and software routines to meet the reader's specific needs. The third edition includes updated coverage of PC hardware and bus systems, an expanded chapter on reliability and fault-finding, a new chapter on virtual instruments and an introduction to programming and software development in a modern 32-bit environment. Additional examples have been included, with source code and executables available for download from the companion website www.key2control.com.
Download or read book Computers and Instrumentation written by Alan Carrick and published by . This book was released on 1979 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book PC Based Instrumentation and Control written by Mike Tooley and published by Routledge. This book was released on 2013-06-17 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: PC Based Instrumentation and Control is a guide to implementing computer control, instrumentation and data acquisition using a standard PC and some of the more traditional computer languages. Numerous examples of configurations and working circuits, as well as representative software, make this a practical, hands-on guide to implementing PC-based testing and calibration systems and increasing efficiency without compromising quality or reliability. Guidance is given on modifying the circuits and software routines to meet the reader's specific needs. The third edition includes updated coverage of PC hardware and bus systems, a new chapter on virtual instruments and an introduction to programming and software development in a modern 32-bit environment. Additional examples have been included, with source code and executables available for download from the companion website www.key2control.com.
Download or read book Microcomputers and Laboratory Instrumentation written by David J. Malcolme-Lawes and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: The invention of the microcomputer in the mid-1970s and its subsequent low-cost proliferation has opened up a new world for the laboratory scientist. Tedious data collection can now be automated relatively cheaply and with an enormous increase in reliability. New techniques of measurement are accessible with the "intelligent" instrumentation made possible by these programmable devices, and the ease of use of even standard measurement techniques may be improved by the data processing capabilities of the humblest micro. The latest items of commercial laboratory instrumentation are invariably "computer controlled", although this is more likely to mean that a microprocessor is involved than that a versatile microcomputer is provided along with the instrument. It is clear that all scientists of the future will need some knowledge of computers, if only to aid them in mastering the button pushing associated with gleaming new instruments. However, to be able to exploit this newly accessible computing power to the full the practising laboratory scientist must gain sufficient understanding to utilise the communication channels between apparatus on the laboratory bench and program within the computer. This book attempts to provide an introduction to those communication channels in a manner which is understandable for scientists who do not specialise in electronics or computers.
Download or read book Making the Right Connections written by Howard V. Malmstadt and published by . This book was released on 1994 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors believe that the effectiveness of future generations of scientists depends in part on their ability to use intelligently, diagnose, and modify their microcomputer-based and electronic instrumentation. Using a "top-down" approach, the authors present electronic concepts, principles, and technology that are impacting our daily lives. They start at the top, by providing a broad perspective of electronic instrumentation, and work down to functional modules, devices, and detailed operations. This top-down approach enables all of the pieces to fit together so that a working knowledge is developed as one proceeds through the chapters. Written specifically for chemists, physicists, engineers, biologists, medical researchers, students, and other technical personnel who can benefit from "making the right connections" to modern instrumentation, this book will empower you to gain better control and make better use of your microcomputers and laboratory instruments.
Download or read book Computer Music Instruments written by Victor Lazzarini and published by Springer. This book was released on 2017-09-26 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is divided into three elements. Part I provides a broad introduction to the foundations of computer music instruments, covering some key points in digital signal processing, with rigorous but approachable mathematics, and programming examples, as well as an overview of development environments for computer instruments. In Part II, the author presents synthesis and processing, with chapters on source-filter models, summation formulae, feedback and adaptive systems, granular methods, and frequency-domain techniques. In Part III he explains application development approaches, in particular communication protocols and user interfaces, and computer music platforms. All elements are fully illustrated with programming examples using Csound, Python, and Faust. The book is suitable for advanced undergraduate and postgraduate students in music and signal processing, and for practitioners and researchers.
Download or read book Aerospace Instrumentation written by M. A. Perry and published by Elsevier. This book was released on 2015-05-18 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerospace Instrumentation, Volume 4 is a collection of papers presented at the Fourth International Aerospace Instrumentation Symposium, held at the College of Aeronautics, Cranfield. Co-sponsored by the Instrument Society of America, the symposium covers most aspects of aerospace instrumentation. This book is composed of 14 chapters and begins with a description of strain gauge transducers, an introduction to noise, filtering, and random function, as well as the data analysis facility designed to satisfy the needs in the fields of fundamental research and major power plant design and commissioning. A chapter examines equipment for the analysis of random processes for low frequence purposes. Other chapters explore the measurement and analysis of rotor blade airloads, the application of digital computer to instrumentation systems, the features of an altitude test facility, and the trade-offs existing between analogue and digital filtering techniques. The last chapters are devoted to test methods for aircraft performance, stability, and control characteristics determination in non-steady flight. These chapters also treat the operational experience of the B-70 flight test data system. This book will prove useful to aerospace scientists, engineers and research workers.
Download or read book Advanced Instrumentation and Computer I O Design written by Patrick H. Garrett and published by John Wiley & Sons. This book was released on 2013-03-19 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an expert in the field of instrumentation and measurement device design, this book employs comprehensive electronic device and circuit specifications to design custom defined-accuracy instrumentation and computer interfacing systems with definitive accountability to assist critical applications. Advanced Instrumentation and Computer I/O Design, Second Edition begins by developing an understanding of sensor-amplifier-filter signal conditioning design methods, enabled by device and system mathematical models, to achieve conditioned signal accuracies of interest and follow-on computer data conversion and reconstruction functions. Providing complete automated system design analyses that employ the Analysis Suite computer-assisted engineering spreadsheet, the book then expands these performance accountability methods coordinated with versatile and evolving hierarchical subprocesses and control architectures to overcome difficult contemporary process automation challenges combining both quantitative and qualitative methods. It then concludes with a taxonomy of computer interfaces and standards including telemetry, virtual, and analytical instrumentation. Advanced Instrumentation and Computer I/O Design, Second Edition offers: Updated chapters incorporating the latest electronic devices and system applications Improved accuracy of the design models between their theoretical derivations and actual measured results End-of-chapter problems based on actual industry, laboratory, and aerospace system designs Multiple real-world case studies performed for technology enterprises Instrumentation Analysis Suite for computer I/O system design A separate solutions manual Written for international engineering practitioners who design and implement industrial process control systems, laboratory instrumentation, medical electronics, telecommunications, and embedded computer systems, this book will also prove useful for upper-undergraduate and graduate-level electrical engineering students.
Download or read book PC based Instrumentation and Control written by Michael H. Tooley and published by Newnes. This book was released on 1995-03-03 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explains, using real, working, proven circuit examples, how to select and configure a control system based on readily available software and hardware. Representative software routines in a variety of languages (including 8086 assembler, BASIC and C) are in
Download or read book Modern Instrumentation written by G Silverman and published by CRC Press. This book was released on 1995-01-01 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern science and engineering relies heavily on understanding computer hardware and software in order to make effective use of these tools in the laboratory and industrial environments. The authors of Modern Instrumentation: A Computer Approach have succeeded in producing a highly readable source that will serve both newcomers to the field as well as experienced professionals. Including both fundamentals and applications, the book first describes the role of the computer in instrument systems and provides numerous practical examples. The second part of the book explores specific software packages and their capabilities for applications such as, instrument design and simulation, data acquisition, data processing, and the potential of artificial intelligence in instrument design. Because of the full integration of theory with practical applications of leading software packages, this book is an extremely useful reference for those who use computer-based instrument technology for data acquisition and who are involved with hardware or software development for laboratory and process control.
Download or read book Projects in Electrical Electronics Instrumentation and Computer Engineering written by Bhattacharya S.K. & ChatterjI S. and published by S. Chand Publishing. This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrical Engineering Projects| Electronics Engineering Projects| Other Engineering Projects
Download or read book Instrumentation Measurement Circuits and Systems written by Tianbiao Zhang and published by Springer Science & Business Media. This book was released on 2012-03-09 with total page 988 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volume includes a set of selected papers extended and revised from the 2011 International Conference on Mechanical Engineering and Technology, held on London, UK, November 24-25, 2011. Mechanical engineering technology is the application of physical principles and current technological developments to the creation of useful machinery and operation design. Technologies such as solid models may be used as the basis for finite element analysis (FEA) and / or computational fluid dynamics (CFD) of the design. Through the application of computer-aided manufacturing (CAM), the models may also be used directly by software to create "instructions" for the manufacture of objects represented by the models, through computer numerically controlled (CNC) machining or other automated processes, without the need for intermediate drawings. This volume covers the subject areas of mechanical engineering and technology, and also covers interdisciplinary subject areas of computers, communications, control and automation. We hope that researchers, graduate students and other interested readers benefit scientifically from the book and also find it stimulating in the process.
Download or read book Instrumentation Reference Book written by Walt Boyes and published by Butterworth-Heinemann. This book was released on 2009-11-25 with total page 929 pages. Available in PDF, EPUB and Kindle. Book excerpt: The discipline of instrumentation has grown appreciably in recent years because of advances in sensor technology and in the interconnectivity of sensors, computers and control systems. This 4e of the Instrumentation Reference Book embraces the equipment and systems used to detect, track and store data related to physical, chemical, electrical, thermal and mechanical properties of materials, systems and operations. While traditionally a key area within mechanical and industrial engineering, understanding this greater and more complex use of sensing and monitoring controls and systems is essential for a wide variety of engineering areas--from manufacturing to chemical processing to aerospace operations to even the everyday automobile. In turn, this has meant that the automation of manufacturing, process industries, and even building and infrastructure construction has been improved dramatically. And now with remote wireless instrumentation, heretofore inaccessible or widely dispersed operations and procedures can be automatically monitored and controlled. This already well-established reference work will reflect these dramatic changes with improved and expanded coverage of the traditional domains of instrumentation as well as the cutting-edge areas of digital integration of complex sensor/control systems. Thoroughly revised, with up-to-date coverage of wireless sensors and systems, as well as nanotechnologies role in the evolution of sensor technology Latest information on new sensor equipment, new measurement standards, and new software for embedded control systems, networking and automated control Three entirely new sections on Controllers, Actuators and Final Control Elements; Manufacturing Execution Systems; and Automation Knowledge Base Up-dated and expanded references and critical standards
Download or read book Advanced Instrumentation and Computer I O Design written by Patrick H. Garrett and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 1994-01-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Instrumentation Control and Automation of Water and Wastewater Treatment and Transport Systems 1993 written by B. Jank and published by Elsevier. This book was released on 2016-06-06 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Instrumentation, Control and Automation of Water and Wastewater Treatment and Transport Systems 1993 comprises a selection of manuscripts on the development of control strategies and their applications and on the status and future directions of Instrumentation, Control, and Automation (ICA) in the water and wastewater industry. The book starts by providing an overview of the status, the constraints and the future prospects for ICA in water and wastewater treatment and transport based on the survey responses of experts from 16 different countries. The text continues by presenting the need for dynamic modeling and simulation software to assist operations staff in developing effective instrumentation control strategies and to provide a training environment for the evaluation of such strategies. The book also covers the critical variables in system success; the use of an enterprise-wide computing that emphasizes the importance of strategic planning, performance measures, and human factors associated with the suggested implementation of applied technology; and the use of part-time unmanned operation at a large wastewater treatment plant. A functional approach based on the utility’s water and wastewater functional requirements; the collection system monitoring and control; water distribution and control systems; dynamic modeling and simulation; and process control strategy and development are also considered. This book will be beneficial to biochemists, wastewater technologists, and public health authorities.
Download or read book The Development of an Airborne Instrumentation Computer System for Flight Test written by and published by . This book was released on 1984 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt: Instrumentation interfacing frequently requires the linking of intelligent systems together, as well as requiring the link itself to be intelligent. The airborne instrumentation computer system (AICS) was developed to address this requirement. Its small size, approximately 254 by 133 by 140-mm, standard bus, and modular-board configuration give it the ability to solve instrumentation interfacing and computation problems without forcing a redesign of the entire unit. This system has been used on the F-15 aircraft digital electronic engine control (DEEC) and its follow-on engine model derivation (EMD) project, and in an OV-1C Mohawk aircraft stall-speed warning system. The AICS is presently undergoing configuration for use on an F-104 pace aircraft and on the advanced fighter technology integration (AFTI) F-111 aircraft.
Download or read book Digital Computers in Scientific Instrumentation Applications to Chemistry written by Sam P. Perone and published by McGraw-Hill Companies. This book was released on 1973 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt:
