Download or read book Material Flow Systems in Manufacturing written by J.M. Tanchoco and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains a collection of contributions related to the design and control of material flow systems in manufacturing. Material flow systems in manufacturing covers a broad spectrum of topics directly affecting issues related to facilities design, material handling and production planning and control. In selecting the papers to include in this book, the scope was limited to the design and operational control aspects related to the physical move ment of parts, tools, containers and material handling devices. Recent develop ments in this area naturally led to concentration on flow systems involving cellular manufacturing, and automated transport equipment such as automated guided vehicles. However, the concepts discussed have general applicability to a wide range of manufacturing flow problems. The book is organized in five major sections: 1. design integration and justification; 2. cell design and material handling considerations; 3. alternative material flow paths; 4. operational control problems; and 5. tooling requirements and transport equipment.
Download or read book Materials Handling Handbook written by Raymond A. Kulweic and published by John Wiley & Sons. This book was released on 1991-01-16 with total page 1482 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sponsored jointly by the American Society of Mechanical Engineers and International Material Management Society, this single source reference is designed to meet today's need for updated technical information on planning, installing and operating materials handling systems. It not only classifies and describes the standard types of materials handling equipment, but also analyzes the engineering specifications and compares the operating capabilities of each type. Over one hundred professionals in various areas of materials handling present efficient methods, procedures and systems that have significantly reduced both manufacturing and distribution costs.
Download or read book Modeling and Simulation written by and published by . This book was released on 1991 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Manufacturing Facilities Design and Material Handling written by Matthew P. Stephens and published by Purdue University Press. This book was released on 2013 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed for junior- and senior-level courses in Plant and Facilities Planning and Manufacturing Systems and Procedures, this textbook is also suitable for graduate-level and two-year college courses. The book takes a practical, hands-on, project-oriented approach to exploring the techniques and procedures for developing an efficient facility layout. It also introduces state-of-the-art tools including computer simulation. Access to Layout-iQ workspace planning software is included for purchasers of the book. Theoretical concepts are clearly explained and then rapidly applied to a practical setting through a detailed case study at the end of the volume. The book systematically leads students through the collection, analysis, and development of information to produce a quality functional plant layout for a lean manufacturing environment. All aspects of facility design, from receiving to shipping, are covered. In the fifth edition of this successful book, previously published by Prentice Hall, numerous updates and corrections have been made. Also, rather than including brief case-in-point examples at the end of each chapter, a single, detailed case study is provided that better exposes students to the multiple considerations that need to be taken into account when improving efficiency in a real manufacturing facility. The textbook has enjoyed substantial international adoptions and has been translated into Spanish and Chinese. This replaces the 4th Edition by Prentice Hall (ISBN# 978-0135001059).
Download or read book Manufacturing Facilities Design Material Handling written by Matthew P. Stephens and published by Purdue University Press. This book was released on 2019-05-15 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed for junior- and senior-level courses in plant and facilities planning and manufacturing systems and procedures, this textbook also is suitable for graduate-level and two-year college courses. The book takes a practical, hands-on, project-oriented approach to exploring the techniques and procedures for developing an efficient facility layout. It also introduces state-of-the-art tools including computer simulation. Access to Layout-iQ workspace planning software is included for purchasers of the book. Theoretical concepts are clearly explained and then rapidly applied to a practical setting through a detailed case study at the end of the volume. The book systematically leads students through the collection, analysis, and development of information to produce a quality functional plant layout for a lean manufacturing environment. All aspects of facility design, from receiving to shipping, are covered. In the sixth edition of this successful book, numerous updates have been made, and a chapter on engineering cost estimating and analysis has been added. Also, rather than including brief case-in-point examples at the end of each chapter, a single, detailed case study is provided that better exposes students to the multiple considerations that need to be taken into account when improving efficiency in a real manufacturing facility. The textbook has enjoyed substantial international adoptions and has been translated into Spanish and Chinese.
Download or read book Intelligent Systems in Design and Manufacturing written by Cihan H. Dagli and published by American Society of Mechanical Engineers. This book was released on 1994 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focuses on solutions to problems in design and manufacturing engineering, presenting a variety of problem solving approaches and practical examples. Covers neural networks and other artificial intelligence tools, computational models for conceptual design, desirable functionalities of intelligent CA
Download or read book Facilities Design written by Sunderesh S. Heragu and published by CRC Press. This book was released on 2008-06-19 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: Delineating the proper design, layout, and location of facilities, this book strikes a healthy balance between theory and practice. It provides an understanding of the practical aspects of implementing preliminary designs development through analytical models. The third edition of a bestseller, it features updated multimedia tools, new software, an
Download or read book Guide to Technical Documents written by Naval Civil Engineering Laboratory (Port Hueneme, Calif.) and published by . This book was released on 1974 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hierarchical Composite Materials written by Kaushik Kumar and published by Walter de Gruyter GmbH & Co KG. This book was released on 2018-04-23 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hierarchical Composite Materials provides an in-depth analysis of a class of advanced composites that have properties that are anisotropic due to structural organization at different length scales. Chapters address how ordering occurs from the atomic-scale up to the microstructure and how control of these factors leads to the final materials' properties. Manufacturing procedures, properties, and applications of different functionally graded materials are discussed in detail. This book is ideal for materials scientists, mechanical engineers, chemists and physicists.
Download or read book Mechanical Engineers Handbook Volume 3 written by Myer Kutz and published by John Wiley & Sons. This book was released on 2015-02-02 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt: Full coverage of manufacturing and management in mechanical engineering Mechanical Engineers' Handbook, Fourth Edition provides a quick guide to specialized areas that engineers may encounter in their work, providing access to the basics of each and pointing toward trusted resources for further reading, if needed. The book's accessible information offers discussions, examples, and analyses of the topics covered, rather than the straight data, formulas, and calculations found in other handbooks. No single engineer can be a specialist in all areas that they are called upon to work in. It's a discipline that covers a broad range of topics that are used as the building blocks for specialized areas, including aerospace, chemical, materials, nuclear, electrical, and general engineering. This third volume of Mechanical Engineers' Handbook covers Manufacturing & Management, and provides accessible and in-depth access to the topics encountered regularly in the discipline: environmentally benign manufacturing, production planning, production processes and equipment, manufacturing systems evaluation, coatings and surface engineering, physical vapor deposition, mechanical fasteners, seal technology, statistical quality control, nondestructive inspection, intelligent control of material handling systems, and much more. Presents the most comprehensive coverage of the entire discipline of Mechanical Engineering Focuses on the explanation and analysis of the concepts presented as opposed to a straight listing of formulas and data found in other handbooks Offers the option of being purchased as a four-book set or as single books Comes in a subscription format through the Wiley Online Library and in electronic and other custom formats Engineers at all levels of industry, government, or private consulting practice will find Mechanical Engineers' Handbook, Volume 3 an "off-the-shelf" reference they'll turn to again and again.
Download or read book Department of the Navy written by United States. Congress. Senate. Committee on Appropriations and published by . This book was released on 1969 with total page 1194 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Control and Dynamic Systems V48 Manufacturing and Automation Systems Techniques and Technologies written by C.T. Leonides and published by Elsevier. This book was released on 2012-12-02 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control and Dynamic Systems: Advances in Theory and Applications, Volume 48: Manufacturing and Automation Systems: Techniques and Technologies, Part 4 of 5 deals with techniques and technologies in manufacturing and automation systems. This book begins by discussing the advances of techniques for measuring the effectiveness of investments in automation and manufacturing systems. It then turns to graphical concurrent modeling language (GCML), a program used to model and analyze discrete manufacturing systems. This book also presents techniques for modeling solids; strategies for design optimization of machine products; design and control of industrial robots; and other optimization methodologies for manufacturing, robotic, and automation systems. This book will provide a uniquely significant reference for those who are interested in manufacturing, robotics, and automation systems.
Download or read book Decision Making in Manufacturing Environment Using Graph Theory and Fuzzy Multiple Attribute Decision Making Methods written by R. Venkata Rao and published by Springer Science & Business Media. This book was released on 2012-08-27 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Decision Making in Manufacturing Environment Using Graph Theory and Fuzzy Multiple Attribute Decision Making Methods presents the concepts and details of applications of MADM methods. A range of methods are covered including Analytic Hierarchy Process (AHP), Technique for Order Preference by Similarity to Ideal Solution (TOPSIS), VIšekriterijumsko KOmpromisno Rangiranje (VIKOR), Data Envelopment Analysis (DEA), Preference Ranking METHod for Enrichment Evaluations (PROMETHEE), ELimination Et Choix Traduisant la Realité (ELECTRE), COmplex PRoportional ASsessment (COPRAS), Grey Relational Analysis (GRA), UTility Additive (UTA), and Ordered Weighted Averaging (OWA). The existing MADM methods are improved upon and three novel multiple attribute decision making methods for solving the decision making problems of the manufacturing environment are proposed. The concept of integrated weights is introduced in the proposed subjective and objective integrated weights (SOIW) method and the weighted Euclidean distance based approach (WEDBA) to consider both the decision maker’s subjective preferences as well as the distribution of the attributes data of the decision matrix. These methods, which use fuzzy logic to convert the qualitative attributes into the quantitative attributes, are supported by various real-world application examples. Also, computer codes for AHP, TOPSIS, DEA, PROMETHEE, ELECTRE, COPRAS, and SOIW methods are included. This comprehensive coverage makes Decision Making in Manufacturing Environment Using Graph Theory and Fuzzy Multiple Attribute Decision Making Methods a key reference for the designers, manufacturing engineers, practitioners, managers, institutes involved in both design and manufacturing related projects. It is also an ideal study resource for applied research workers, academicians, and students in mechanical and industrial engineering.
Download or read book Systems Modeling and Simulation Theory and Applications written by Doo-Kwon Baik and published by Springer. This book was released on 2005-02-07 with total page 747 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed post-proceedings of the third Asian Simulation Conference, AsiaSim 2004, held in Jeju Island, Korea in October 2004. The 78 revised full papers presented together with 2 invited keynote papers were carefully reviewed and selected from 178 submissions; after the conference, the papers went through another round of revision. The papers are organized in topical sections on modeling and simulation methodology, manufacturing, aerospace simulation, military simulation, medical simulation, general applications, network simulation and modeling, e-business simulation, numerical simulation, traffic simulation, transportation, virtual reality, engineering applications, and DEVS modeling and simulation.
Download or read book Theoretical and Practical Advancements for Fuzzy System Integration written by Li, Deng-Feng and published by IGI Global. This book was released on 2017-01-05 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: In real management situations, uncertainty is inherently present in decision making. As such, it is increasingly imperative to research and develop new theories and methods of fuzzy sets. Theoretical and Practical Advancements for Fuzzy System Integration is a pivotal reference source for the latest scholarly research on the importance of expressing and measuring fuzziness in order to develop effective and practical decision making models and methods. Featuring coverage on an expansive range of perspectives and topics, such as fuzzy logic control, intuitionistic fuzzy set theory, and defuzzification, this book is ideally designed for academics, professionals, and researchers seeking current research on theoretical frameworks and real-world applications in the area of fuzzy sets and systems.
Download or read book Underground Production Methods in Mining Engineering written by Prof. Dr. Bilal Semih Bozdemir and published by Prof. Dr. Bilal Semih Bozdemir. This book was released on with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Underground Production Methods in Mining Engineering Introduction to Underground Mining Advantages of Underground Mining Challenges of Underground Mining Shaft Mining Drift Mining Slope Mining Room-and-Pillar Mining Longwall Mining Safety Considerations in Underground Mining Ventilation Systems in Underground Mines Ground Support Techniques Drilling and Blasting Techniques Transportation Systems in Underground Mines Automation and Robotics in Underground Mining
Download or read book Production and Operations Analysis written by Susmita Bandyopadhyay and published by CRC Press. This book was released on 2019-12-18 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to cover various aspects of the Production and Operations Analysis. Apart from the introduction to basic understanding of each topic, the book will also provide insights to various conventional techniques as well as, various other mathematical and nature-based techniques extracted from the existing literature. Concepts like smart factories, intelligent manufacturing, and various techniques of manufacturing will also be included. Various types of numerical examples will also be presented in each chapter and the descriptions will be done in lucid style with figures, point-wise descriptions, tables, pictures to facilitate easy understanding of the subject.
