Download or read book Computer Simulation of a Combined cycle Biomass fueled Power Plant written by Stephen John Fox and published by . This book was released on 1984 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis presents thermodynamic evaluations of various biomass-fueled combined-cycle power plants using a computer model developed for simulating such plants. The combined-cycle systems Investigated are characterized by having a wood-fueled combustor, an indirect-fired gas turbine, and a steam cycle. This work was part of a larger biomass energy project at Oregon State University. The systems evaluated consisted of a "base case" design and five variations thereof. The base case itself includes a fuel preparation section with fuel drying, a combustor, an indirect-fired gas turbine system, a waste heat recovery boiler, and a Rankine cycle steam system. An Important facet of this design Is that hot combustion gases as well as the exhaust gases from the waste heat recovery boiler are used to dry the fuel. Variations of the base case that were investigated included (I) elimination of the use of hot combustion gases for drying, (II) steam Injection Into the gas turbine, (III) boosting the indirect-fired gas turbine inlet temperature with a trimburner, (iv) eliminating fuel drying, and (v) a combination of (III) and (iv). The simulation model developed consists of an main program and component models. The main program solves the simultaneous nonlinear algebraic equations that arise in modeling steady state thermal systems. The equations of the process in each component are evaluated In the respective component model. The unknown variables require initial guesses at the start of simulation and are solved by iteration using successive substitution until convergence is reached. The results of the simulations allowed the various systems to be compared with regard to efficiency, power output, total heat transfer area, and irreversibility. The various systems have similar net efficiencies, although those using a trimburner have a net efficiency about 2% higher than the others. In fact, the efficiency of the fossil fuel used in the trimburner is about 42%. The power output of the various systems, like the efficiency, is about the same except for those that utilize the trimburner. AlI of the systems without the trimburner have essentially the same overalI irreversibility. But some of the systems have very large mixing irreversibilities and others have greater irreversibilities in the heat exchanger. The occurance of the irreversibilities In the heat exchangers corresponds with smaller heat transfer areas. Total heat transfer area changed by as much as 6000 square feet (30%) from one system to another. These thermal analysis results show that detailed economic evaluations are necessary to fuIly determine the relative desirability of the systems.
Download or read book Combined Cycle Systems for Near Zero Emission Power Generation written by Ashok D Rao and published by Elsevier. This book was released on 2012-04-12 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combined cycle power plants are one of the most promising ways of improving fossil-fuel and biomass energy production. The combination of a gas and steam turbine working in tandem to produce power makes this type of plant highly efficient and allows for CO2 capture and sequestration before combustion. This book provides a comprehensive review of the design, engineering and operational issues of a range of advanced combined cycle plants. After introductory chapters on basic combined cycle power plant and advanced gas turbine design, the book reviews the main types of combined cycle system. Chapters discuss the technology, efficiency and emissions performance of natural gas-fired combined cycle (NGCC) and integrated gasification combined cycle (IGCC) as well as novel humid air cycle, oxy-combustion turbine cycle systems. The book also reviews pressurised fluidized bed combustion (PFBC), externally fired combined cycle (EFCC), hybrid fuel cell turbine (FC/GT), combined cycle and integrated solar combined cycle (ISCC) systems. The final chapter reviews techno-economic analysis of combined cycle systems. With its distinguished editor and international team of contributors, Combined cycle systems for near-zero emission power generation is a standard reference for both industry practitioners and academic researchers seeking to improve the efficiency and environmental impact of power plants. Provides a comprehensive review of the design, engineering and operational issues of a range of advanced combined cycle plants Introduces basic combined cycle power plant and advanced gas turbine design and reviews the main types of combined cycle systems Discusses the technology, efficiency and emissions performance of natural gas-fired combined cycle (NGCC) systems and integrated gasification combined cycle (IGCC) systems, as well as novel humid air cycle systems and oxy-combustion turbine cycle systems
Download or read book Fossil Energy Update written by and published by . This book was released on 1981 with total page 886 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy from Biomass written by and published by . This book was released on 1987 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computer Simulation of Fossil Fueled Power Plants written by University of New Mexico. Technology Application Center and published by . This book was released on 1974 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Conversion of Coal Fired Power Plants to Cogeneration and Combined Cycle written by Ryszard Bartnik and published by Springer Science & Business Media. This book was released on 2011-07-28 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conversion of Coal-Fired Power Plant to Cogeneration and Combined-Cycle presents the methodology, calculation procedures and tools used to support enterprise planning for adapting power stations to cogeneration and combined-cycle forms. The authors analyze the optimum selection of the structure of heat exchangers in a 370 MW power block, the structure of heat recovery steam generators and gas turbines. Conversion of Coal-Fired Power Plant to Cogeneration and Combined-Cycle also addresses the problems of converting existing power plants to dual-fuel gas-steam combined-cycle technologies coupled with parallel systems. Conversion of Coal-Fired Power Plant to Cogeneration and Combined-Cycle is an informative monograph written for researchers, postgraduate students and policy makers in power engineering.
Download or read book Assessment of Novel Power Generation Systems for the Biomass Industry written by and published by . This book was released on 1911 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this programme of research is to produce a method for assessing and optimising the performance of advanced gas turbine power plants for electricity generation within the Brazilian electric sector. With the privatisation of the Brazilian electric sector, interest has been given to the thermal plants and studies have been carried out along with the use of other alternative fuels rather than fossil fuels. Biomass is a fuel of increasing interest for power generation systems since it is clean and renewable. Essentially all biomass power plants in the Brazilian market today operate on a steam Rankine cycle, which has a poor efficiency. The Brazilian electricity market has paid attention on Biomass integrated gasification gas turbine (BIG/GT) combined cycle plants where solid biomass is gasified. A simple chemical model for representing the gasifier in the power plant is presented and optimisation of the gasification process has been applied. The method for assessing the performance of power plants takes into account not only energy, but it applies the exergy method, which uses the second law of thermodynamics and works out the destruction of energy inside plant components and energy losses rejected to atmosphere. A thermoeconomic model for assessing the power plant has also been described. The optimisation of the assessment method of power plants using exergy and thermoeconomics has been proposed based on genetic algorithms. This new technique has been fairly successful at solving optimisation problems and is easy to implement. The decision of applying genetic algorithms is due to the complexity of the mathematical model applied in the performance assessment of power plants. The assessment of combined cycles like gas / steam cycle, gas / air cycle, gas / steam / freon cycle, gas / air / freon cycle and chemically recuperated gas turbine have been investigated. The application of the overall assessment method helps to understand different and very expensi.
Download or read book Coal and Biomass Gasification written by Santanu De and published by Springer. This book was released on 2017-12-13 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the science and technology of the gasification process and the production of electricity, synthetic fuels and other useful chemicals. Pursuing a holistic approach, it covers the fundamentals of gasification and its various applications. In addition to discussing recent advances and outlining future directions, it covers advanced topics such as underground coal gasification and chemical looping combustion, and describes the state-of-the-art experimental techniques, modeling and numerical simulations, environmentally friendly approaches, and technological challenges involved. Written in an easy-to-understand format with a comprehensive glossary and bibliography, the book offers an ideal reference guide to coal and biomass gasification for beginners, engineers and researchers involved in designing or operating gasification plants.
Download or read book Dynamic Simulation of a Solid Fuelled Gas Turbine System written by Carl A. Palmer and published by . This book was released on 1991 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 32nd European Symposium on Computer Aided Process Engineering written by Ludovic Montastruc and published by Elsevier. This book was released on 2022-06-30 with total page 1760 pages. Available in PDF, EPUB and Kindle. Book excerpt: 32nd European Symposium on Computer Aided Process Engineering: ESCAPE-32 contains the papers presented at the 32nd European Symposium of Computer Aided Process Engineering (ESCAPE) event held in Toulouse, France. It is a valuable resource for chemical engineers, chemical process engineers, researchers in industry and academia, students and consultants for chemical industries who work in process development and design. Presents findings and discussions from the 32nd European Symposium of Computer Aided Process Engineering (ESCAPE) event
Download or read book Introduction to the simulation of power plants for EBSILON Professional Version 15 written by Steffen Swat and published by epubli. This book was released on 2021-07-13 with total page 107 pages. Available in PDF, EPUB and Kindle. Book excerpt: EBSILON®Professional is a powerful modeling system developed for the simulation of thermodynamic cycles. It is suitable as a tool for plant planning, design and optimization of thermal power plants with a steam process or a gas turbine process as well as plants with renewable energies (biomass, wind energy, solar energy and geothermal energy). The introduction describes the basic principles and the working steps to create a model of the plant. Furthermore, the work with the internal programming environment EbsScript and the handling of the calculation of time series is presented.
Download or read book 26th European Symposium on Computer Aided Process Engineering written by and published by Elsevier. This book was released on 2016-06-17 with total page 2482 pages. Available in PDF, EPUB and Kindle. Book excerpt: 26th European Symposium on Computer Aided Process Engineering contains the papers presented at the 26th European Society of Computer-Aided Process Engineering (ESCAPE) Event held at Portorož Slovenia, from June 12th to June 15th, 2016. Themes discussed at the conference include Process-product Synthesis, Design and Integration, Modelling, Numerical analysis, Simulation and Optimization, Process Operations and Control and Education in CAPE/PSE. Presents findings and discussions from the 26th European Society of Computer-Aided Process Engineering (ESCAPE) Event
Download or read book Energy and the New Reality 2 written by L. D. Danny Harvey and published by Routledge. This book was released on 2010-08-12 with total page 613 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transforming our energy supplies to be more sustainable is seen by many to be the biggest challenge of our times. In this comprehensive textbook, L. D. Danny Harvey sets out in unprecedented detail the path we must take to minimize the effects that the way we harness energy will have on future climate change. The book opens by highlighting the importance of moving to low carbon technologies for generation, then moves on to explain the functioning, potential and social/environmental issues around: solar energy wind energy biomass energy geothermal energy hydroelectric power ocean energy nuclear energy. It also covers the options for carbon capture and storage and the contexts in which low carbon energy can best be utilized (potential for community integrated systems, and the hydrogen economy). The book closes with scenarios that combine the findings from its companion volume (concerning the potential for limiting future energy demand) with the findings from this volume (concerning the cost and potential of C-free energy systems) to generate scenarios that succeed in limiting future atmospheric CO2 concentration to no more than 450 ppmv. Detailed yet accessible, meticulously researched and reviewed, this work constitutes an indispensible textbook and reference for students and practitioners in sustainable energy and engineering.
Download or read book Advanced Biomass Gasification written by Steffen Heidenreich and published by Academic Press. This book was released on 2016-06-07 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Biomass Gasification: New Concepts for Efficiency Increase and Product Flexibility provides a thorough overview on new concepts in biomass gasification and consolidated information on advances for process integration and combination, which could otherwise only be gained by reading a high number of journal publications. Heidenreich, Müller and Foscolo, highly respected experts in this field, start their exploration with the compact UNIQUE reactor, gasification and pyrolysis, gasification and combustion, and catalysts and membranes. The authors then examine biomass pre-treatment processes, taking into account the energy balance of the overall conversion process, and look into oxygen-steam gasification and solutions for air separation, including new options for integration of O2-membranes into the gasifier. Several polygeneration strategies are covered, including combined heat and power (CHP) production with synthetic natural gas (SNG), biofuels and hydrogen, and new cutting-edge concepts, such as plasma gasification, supercritical water gasification, and catalytic gasification, which allows for insights on the future technological outlook of the area. This book is then a valuable resource for industry and academia-based researchers, as well as graduate students in the energy and chemical sectors with interest in biomass gasification, especially in areas of power engineering, bioenergy, chemical engineering, and catalysis. Explores state-of-the-art technologies that allow for greater efficiency and flexibility in gasification, including process integration, combination, and polygeneration strategies Consolidates information that was, up until now, scattered among several sources, including journal articles Provides a valuable resource for industry and academia-based researchers, as well as graduate students in the energy and chemical sectors with interest in biomass gasification, especially in areas of power engineering, bioenergy, chemical engineering, and catalysis
Download or read book Repowering Solid Fuel Biomass Electricity Generation written by Jaquelyn Birdsall and published by . This book was released on 2012 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Circular Series written by Oregon State University. Engineering Experiment Station and published by . This book was released on 1981 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 8th International Conference on Foundations of Computer Aided Process Design written by and published by Elsevier. This book was released on 2014-07-14 with total page 835 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume collects together the presentations at the Eighth International Conference on Foundations of Computer-Aided Process Design, FOCAPD-2014, an event that brings together researchers, educators, and practitioners to identify new challenges and opportunities for process and product design. The chemical industry is currently entering a new phase of rapid evolution. The availability of low-cost feedstocks from natural gas is causing renewed investment in basic chemicals in the OECD, while societal pressures for sustainability and energy security continue to be key drivers in technology development and product selection. This dynamic environment creates opportunities to launch new products and processes and to demonstrate new methodologies for innovation, synthesis and design. FOCAPD-2014 fosters constructive interaction among thought leaders from academia, industry, and government and provides a showcase for the latest research in product and process design. Focuses exclusively on the fundamentals and applications of computer-aided design for the process industries. Provides a fully archival and indexed record of the FOCAPD14 conference Aligns the FOCAPD series with the ESCAPE and PSE series
