Download or read book Computer Modelling of Electrical Power Systems written by Jos Arrillaga and published by . This book was released on 1983 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes the use of power system component models and efficient computational techniques in the development of a new generation of programs representing the steady and dynamic states of electrical power systems. Presents main computational and transmission system developments. Derives steady state models of a.c. and d.c. power systems plant components, describes a general purpose phase a.c. load flow program emphasizing Newton Fast Decoupled Algorithm, and more. Considers all aspects of the power system in the dynamic state.

Download or read book Computer Modelling of Electrical Power Systems written by J. Arrillaga and published by . This book was released on 1991 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Computer Analysis of Power Systems written by Jos Arrillaga and published by John Wiley & Sons. This book was released on 1990 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes the main computer modelling techniques that constitute the basic framework of modern power system analysis. Basic knowledge of power system theory, matrix analysis and numerical techniques is presumed, although appendices and references are included to provide the relevant background.

Download or read book Power System Modelling and Scripting written by Federico Milano and published by Springer Science & Business Media. This book was released on 2010-09-08 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power system modelling and scripting is a quite general and ambitious title. Of course, to embrace all existing aspects of power system modelling would lead to an encyclopedia and would be likely an impossible task. Thus, the book focuses on a subset of power system models based on the following assumptions: (i) devices are modelled as a set of nonlinear differential algebraic equations, (ii) all alternate-current devices are operating in three-phase balanced fundamental frequency, and (iii) the time frame of the dynamics of interest ranges from tenths to tens of seconds. These assumptions basically restrict the analysis to transient stability phenomena and generator controls. The modelling step is not self-sufficient. Mathematical models have to be translated into computer programming code in order to be analyzed, understood and “experienced”. It is an object of the book to provide a general framework for a power system analysis software tool and hints for filling up this framework with versatile programming code. This book is for all students and researchers that are looking for a quick reference on power system models or need some guidelines for starting the challenging adventure of writing their own code.

Download or read book Handbook of Electrical Power System Dynamics written by Mircea Eremia and published by John Wiley & Sons. This book was released on 2013-02-21 with total page 914 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to provide insights on new trends in power systems operation and control and to present, in detail, analysis methods of the power system behavior (mainly its dynamics) as well as the mathematical models for the main components of power plants and the control systems implemented in dispatch centers. Particularly, evaluation methods for rotor angle stability and voltage stability as well as control mechanism of the frequency and voltage are described. Illustrative examples and graphical representations help readers across many disciplines acquire ample knowledge on the respective subjects.

Download or read book Power Systems Harmonics written by Enrique Acha and published by John Wiley & Sons. This book was released on 2001-06-11 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: The deregulation and restructuring of the power utilities industry has made the quality of power supply a worldwide issue. Providing background theory and illustrative examples, this text provides a broad introduction to the issues involved.

Download or read book Computer Modelling of Electrical Power Systems written by J. Arrillaga and published by John Wiley & Sons. This book was released on 2001 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer models can be used to simulate the changing states of electrical power systems. Such simulations enable the power engineer to study performance and predict disturbances. Focusing on the performance of the power system boosted by the FACTS. (Flexible Alternate Current Transmission Systems), this timely update of a highly successful text responds to recent developments in power electronics. Comprehensive coverage includes: The mathematical background, algorithms and the basic tools needed to study complex power systems, their interaction and likely response to different types of network pathologies or disturbances The latest improvements in network modelling techniques Power electronics equipment Written by an internationally renowned author in the field, this text is a valuable reference resource for practising engineers responsible for power supply systems as well as electrical engineering postgraduates.

Download or read book AC DC Power System Analysis written by J. Arrillaga and published by IET. This book was released on 1998 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: A graduate-level textbook that can also serve as a reference for engineers and researchers working on problems in modern power systems. Emphasizes incorporating HVDC converters and systems into the analysis of power systems, but describes algorithms that can be extended to other industrial components such as drives and smelters and to the flexible AC transmission systems technology. Considers only system studies, influenced by steady-state or transient converter control; and not fast transients such as lightning. Annotation copyrighted by Book News, Inc., Portland, OR

Download or read book Analysis and Simulation of Electrical and Computer Systems written by Lesław Gołębiowski and published by Springer. This book was released on 2014-11-08 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the selected results of the XI Scientific Conference Selected Issues of Electrical Engineering and Electronics (WZEE) which was held in Rzeszów and Czarna, Poland on September 27-30, 2013. The main aim of the Conference was to provide academia and industry to discuss and present the latest technological advantages and research results and to integrate the new interdisciplinary scientific circle in the field of electrical engineering, electronics and mechatronics. The Conference was organized by the Rzeszów Division of Polish Association of Theoretical and Applied Electrical Engineering (PTETiS) in cooperation with Rzeszów University of Technology, the Faculty of Electrical and Computer Engineering and Rzeszów University, the Faculty of Mathematics and Natural Sciences.

Download or read book Electrical Power System Essentials written by Pieter Schavemaker and published by John Wiley & Sons. This book was released on 2017-05-08 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: The electrical power supply is about to change; future generation will increasingly take place in and near local neighborhoods with diminishing reliance on distant power plants. The existing grid is not adapted for this purpose as it is largely a remnant from the 20th century. Can the grid be transformed into an intelligent and flexible grid that is future proof? This revised edition of Electrical Power System Essentials contains not only an accessible, broad and up-to-date overview of alternating current (AC) power systems, but also end-of-chapter exercises in every chapter, aiding readers in their understanding of the material introduced. With an original approach the book covers the generation of electric energy from thermal power plants as from renewable energy sources and treats the incorporation of power electronic devices and FACTS. Throughout there are examples and case studies that back up the theory or techniques presented. The authors set out information on mathematical modelling and equations in appendices rather than integrated in the main text. This unique approach distinguishes it from other text books on Electrical Power Systems and makes the resource highly accessible for undergraduate students and readers without a technical background directly related to power engineering. After laying out the basics for a steady-state analysis of the three-phase power system, the book examines: generation, transmission, distribution, and utilization of electric energy wind energy, solar energy and hydro power power system protection and circuit breakers power system control and operation the organization of electricity markets and the changes currently taking place system blackouts future developments in power systems, HVDC connections and smart grids The book is supplemented by a companion website from which teaching materials can be downloaded. https://www.wiley.com//legacy/wileychi/powersystem/material.html

Download or read book Computer Modelling Of Electrical Power Systems 2Nd Ed written by J. Arrillaga and published by . This book was released on 2009-12-23 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Computer Techniques and Models in Power Systems written by K U Rao and published by I. K. International Pvt Ltd. This book was released on 2013-12-30 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book deals with the application of digital computers for power system analysis including fault analysis, load flows, stability assessment, economic operation and power system control. The book also covers extensively modeling of various power system components. The required mathematical background is presented at the appropriate sections in the book. A sincere attempt has been made to include a number of solved examples in every chapter, so that the students get an insight into the problems in practical power systems. Results from simulation are presented wherever applicable. The simulations have been carried out in MATLAB. The book covers more than a semester course. It can be used for UG courses on Power System Analysis, Computer applications in power system analysis, modeling of power system components, power system operation and control. It is also useful to postgraduate students of power engineering.

Download or read book Power System Modeling Computation and Control written by Joe H. Chow and published by John Wiley & Sons. This book was released on 2020-01-21 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides students with an understanding of the modeling and practice in power system stability analysis and control design, as well as the computational tools used by commercial vendors Bringing together wind, FACTS, HVDC, and several other modern elements, this book gives readers everything they need to know about power systems. It makes learning complex power system concepts, models, and dynamics simpler and more efficient while providing modern viewpoints of power system analysis. Power System Modeling, Computation, and Control provides students with a new and detailed analysis of voltage stability; a simple example illustrating the BCU method of transient stability analysis; and one of only a few derivations of the transient synchronous machine model. It offers a discussion on reactive power consumption of induction motors during start-up to illustrate the low-voltage phenomenon observed in urban load centers. Damping controller designs using power system stabilizer, HVDC systems, static var compensator, and thyristor-controlled series compensation are also examined. In addition, there are chapters covering flexible AC transmission Systems (FACTS)—including both thyristor and voltage-sourced converter technology—and wind turbine generation and modeling. Simplifies the learning of complex power system concepts, models, and dynamics Provides chapters on power flow solution, voltage stability, simulation methods, transient stability, small signal stability, synchronous machine models (steady-state and dynamic models), excitation systems, and power system stabilizer design Includes advanced analysis of voltage stability, voltage recovery during motor starts, FACTS and their operation, damping control design using various control equipment, wind turbine models, and control Contains numerous examples, tables, figures of block diagrams, MATLAB plots, and problems involving real systems Written by experienced educators whose previous books and papers are used extensively by the international scientific community Power System Modeling, Computation, and Control is an ideal textbook for graduate students of the subject, as well as for power system engineers and control design professionals.

Download or read book Predictive Modelling for Energy Management and Power Systems Engineering written by Ravinesh Deo and published by Elsevier. This book was released on 2020-09-30 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: Predictive Modeling for Energy Management and Power Systems Engineering introduces readers to the cutting-edge use of big data and large computational infrastructures in energy demand estimation and power management systems. The book supports engineers and scientists who seek to become familiar with advanced optimization techniques for power systems designs, optimization techniques and algorithms for consumer power management, and potential applications of machine learning and artificial intelligence in this field. The book provides modeling theory in an easy-to-read format, verified with on-site models and case studies for specific geographic regions and complex consumer markets. Presents advanced optimization techniques to improve existing energy demand system Provides data-analytic models and their practical relevance in proven case studies Explores novel developments in machine-learning and artificial intelligence applied in energy management Provides modeling theory in an easy-to-read format

Download or read book Power System Dynamics written by Jan Machowski and published by John Wiley & Sons. This book was released on 2020-06-08 with total page 885 pages. Available in PDF, EPUB and Kindle. Book excerpt: An authoritative guide to the most up-to-date information on power system dynamics The revised third edition of Power System Dynamics and Stability contains a comprehensive, state-of-the-art review of information on the topic. The third edition continues the successful approach of the first and second editions by progressing from simplicity to complexity. It places the emphasis first on understanding the underlying physical principles before proceeding to more complex models and algorithms. The book is illustrated by a large number of diagrams and examples. The third edition of Power System Dynamics and Stability explores the influence of wind farms and virtual power plants, power plants inertia and control strategy on power system stability. The authors—noted experts on the topic—cover a range of new and expanded topics including: Wide-area monitoring and control systems. Improvement of power system stability by optimization of control systems parameters. Impact of renewable energy sources on power system dynamics. The role of power system stability in planning of power system operation and transmission network expansion. Real regulators of synchronous generators and field tests. Selectivity of power system protections at power swings in power system. Criteria for switching operations in transmission networks. Influence of automatic control of a tap changing step-up transformer on the power capability area of the generating unit. Mathematical models of power system components such as HVDC links, wind and photovoltaic power plants. Data of sample (benchmark) test systems. Power System Dynamics: Stability and Control, Third Edition is an essential resource for students of electrical engineering and for practicing engineers and researchers who need the most current information available on the topic.

Download or read book Modeling Simulation and Control of a Medium Scale Power System written by Tharangika Bambaravanage and published by Springer. This book was released on 2017-10-17 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the most important aspects of mathematical modeling, computer simulation, and control of medium-scale power systems. It discusses a number of practical examples based on Sri Lanka’s power system, one characterized by comparatively high degrees of variability and uncertainty. Recently introduced concepts such as controlled disintegration to maintain grid stability are discussed and studied using simulations of practical scenarios. Power systems are complex, geographically distributed, dynamical systems with numerous interconnections between neighboring systems. Further, they often comprise a generation mix that includes hydro, thermal, combined cycle, and intermittent renewable plants, as well as considerably extended transmission lines. Hence, the detailed analysis of their transient behaviors in the presence of disturbances is both highly theory-intensive and challenging in practice. Effectively regulating and controlling power system behavior to ensure consistent service quality and transient stability requires the use of various schemes and systems. The book’s initial chapters detail the fundamentals of power systems; in turn, system modeling and simulation results using Power Systems Computer Aided Design/Electromagnetic Transients including DC (PSCAD/EMTDC) software are presented and compared with available real-world data. Lastly, the book uses computer simulation studies under a variety of practical contingency scenarios to compare several under-frequency load-shedding schemes. Given the breadth and depth of its coverage, it offers a truly unique resource on the management of medium-scale power systems.

Download or read book Distributed Energy Management of Electrical Power Systems written by Yinliang Xu and published by John Wiley & Sons. This book was released on 2021-01-13 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Go in-depth with this comprehensive discussion of distributed energy management Distributed Energy Management of Electrical Power Systems provides the most complete analysis of fully distributed control approaches and their applications for electric power systems available today. Authored by four respected leaders in the field, the book covers the technical aspects of control, operation management, and optimization of electric power systems. In each chapter, the book covers the foundations and fundamentals of the topic under discussion. It then moves on to more advanced applications. Topics reviewed in the book include: System-level coordinated control Optimization of active and reactive power in power grids The coordinated control of distributed generation, elastic load and energy storage systems Distributed Energy Management incorporates discussions of emerging and future technologies and their potential effects on electrical power systems. The increased impact of renewable energy sources is also covered. Perfect for industry practitioners and graduate students in the field of power systems, Distributed Energy Management remains the leading reference for anyone with an interest in its fascinating subject matter.