Download or read book Computer Modeling of Free Surface and Pressurized Flows written by M. Hanif Chaudhry and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 737 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computers are widely used for the analysis, design, and operation of water resource projects. This gives accurate results, allowing the analysis of complex systems which may not have been possible otherwise, and the investigation and comparison of several different alternatives in a short time, thereby reducing the project costs, optimizing design, and efficient utilization of resources. This volume compiles an edited version of the lecture notes specially prepared by 14 well-known European and North American researchers. Part I deals with free-surface flows. Governing equations are derived and their solution by the finite-difference, finite-element, and boundary-integral methods are discussed. Then, turbulence models, three-dimensional models, dam-break flow models, sediment transport models, and flood routing models are presented. Part II is related to the modeling of steady and transient pressurized flows. Governing equations for both single and two-component flows are derived and numerical methods for their solution are presented. The modeling of water quality in pipe networks, of cooling water systems, and slow and rapid transients is then discussed.
Download or read book Non Hydrostatic Free Surface Flows written by Oscar Castro-Orgaz and published by Springer. This book was released on 2017-03-27 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides essential information on the higher mathematical level of approximation over the gradually varied flow theory, also referred to as the Boussinesq-type theory. In this context, it presents higher order flow equations, together with their applications in a broad range of pertinent engineering and environmental problems, including open channel, groundwater, and granular material flows.
Download or read book Advances In Hydraulics And Water Engineering Volumes I Ii Proceedings Of The 13th Iahr apd Congress written by John Junke Guo and published by World Scientific. This book was released on 2002-07-18 with total page 1152 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a wide range of recent advances in hydraulics and water engineering. It contains four sections: hydraulics and open channel flow; hydrology, water resources management and hydroinformatics; maritime hydraulics; ecohydraulics and water quality management. World authorities such as Mike Abbot, I Nezu, A J Metha, M Garcia and P Y Julien have contributed to the book.
Download or read book Research Perspectives in Hydraulics and Water Resources Engineering written by Rama Prasad and published by World Scientific. This book was released on 2002 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains ten state-of-the-art review articles on selected topics in hydraulics/fluid mechanics and water resources engineering.
Download or read book Handbook of Fluid Dynamics written by Richard W. Johnson and published by CRC Press. This book was released on 2016-04-06 with total page 1544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Fluid Dynamics offers balanced coverage of the three traditional areas of fluid dynamics—theoretical, computational, and experimental—complete with valuable appendices presenting the mathematics of fluid dynamics, tables of dimensionless numbers, and tables of the properties of gases and vapors. Each chapter introduces a different fluid dynamics topic, discusses the pertinent issues, outlines proven techniques for addressing those issues, and supplies useful references for further research. Covering all major aspects of classical and modern fluid dynamics, this fully updated Second Edition: Reflects the latest fluid dynamics research and engineering applications Includes new sections on emerging fields, most notably micro- and nanofluidics Surveys the range of numerical and computational methods used in fluid dynamics analysis and design Expands the scope of a number of contemporary topics by incorporating new experimental methods, more numerical approaches, and additional areas for the application of fluid dynamics Handbook of Fluid Dynamics, Second Edition provides an indispensable resource for professionals entering the field of fluid dynamics. The book also enables experts specialized in areas outside fluid dynamics to become familiar with the field.
Download or read book Hydrobiological Modelling written by Brian J. Williams and published by Lulu.com. This book was released on 2006 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book describes models of aquatic ecosystems, ranging from lakes to estuaries to the deep ocean. It provides a background in the physical and biological processes, numerical methods and elementary ecosystem models. It describes two of the most widely used hydrodynamic models and presents a number of case studies. The practice of modelling in management is discussed.
Download or read book River Basin Modelling for Flood Risk Mitigation written by Donald Knight and published by CRC Press. This book was released on 2005-11-17 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flooding accounts for one-third of natural disasters worldwide and for over half the deaths which occur as a result of natural disasters. As the frequency and volume of flooding increases, as a result of climate change, there is a new urgency amongst researchers and professionals working in flood risk management. River Basin Modelling for Flood Risk Mitigation brings together thirty edited papers by leading experts who gathered for the European Union’s Advanced Study Course at the University of Birmingham, UK. The scope of the course ranged from issues concerning the protection of life, to river restoration and wetland management. A variety of topics is covered in the book including climate change, hydro-informatics, hydro-meterology, river flow forecasting systems and dam-break modelling. The approach is broad, but integrated, providing an attractive and informative package that will satisfy researchers and professionals, while offering a sound introduction to students in Engineering and Geography.
Download or read book Free Surface Flow written by Nikolaos D. Katopodes and published by Butterworth-Heinemann. This book was released on 2018-08-21 with total page 1020 pages. Available in PDF, EPUB and Kindle. Book excerpt: Free Surface Flow: Environmental Fluid Mechanics introduces a wide range of environmental fluid flows, such as water waves, land runoff, channel flow, and effluent discharge. The book provides systematic analysis tools and basic skills for study fluid mechanics in natural and constructed environmental flows. As the prediction of changes in free surfaces in rivers, lakes, estuaries and in the ocean directly affects the design of structures that control surface waters, and because planning for the allocation of fresh-water resources in a sustainable manner is an essential goal, this book provides the necessary background and research. Helps users determine the transfer of solute mass through the air-water interface Presents tactics on the impact of free shear flow in the environment and how to quantify mixing mechanisms in turbulent jets and wakes Gives users tactics to predict the fate and transport of contaminants in stratified lakes and estuaries
Download or read book Free Surface Flow written by Nikolaos D. Katopodes and published by Butterworth-Heinemann. This book was released on 2018-10-31 with total page 914 pages. Available in PDF, EPUB and Kindle. Book excerpt: Free-Surface Flow: Computational Methods presents a detailed analysis of numerical schemes for shallow-water waves. It includes practical applications for the numerical simulation of flow and transport in rivers and estuaries, the dam-break problem and overland flow. Closure models for turbulence, such as Reynolds-Averaged Navier-Stokes and Large Eddy Simulation are presented, coupling the aforementioned surface tracking techniques with environmental fluid dynamics. While many computer programs can solve the partial differential equations describing the dynamics of fluids, many are not capable of including free surfaces in their simulations. Provides numerical solutions of the turbulent Navier-Stokes equations in three space dimensions Includes closure models for turbulence, such as Reynolds-Averaged Navier-Stokes, and Large Eddy Simulation Practical applications are presented for the numerical simulation of flow and transport in rivers and estuaries, the dam-break problem and overland flow
Download or read book Radiological Risk Assessment and Environmental Analysis written by John E. Till and published by Oxford University Press. This book was released on 2008-07-10 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radiological Risk Assessment and Environmental Analysis comprehensively explains methods used for estimating risk to people exposed to radioactive materials released to the environment by nuclear facilities or in an emergency such as a nuclear terrorist event. This is the first book that merges the diverse disciplines necessary for estimating where radioactive materials go in the environment and the risk they present to people. It is not only essential to managers and scientists, but is also a teaching text. The chapters are arranged to guide the reader through the risk assessment process, beginning with the source term (where the radioactive material comes from) and ending with the conversion to risk. In addition to presenting mathematical models used in risk assessment, data is included so the reader can perform the calculations. Each chapter also provides examples and working problems. The book will be a critical component of the rebirth of nuclear energy now taking place, as well as an essential resource to prepare for and respond to a nuclear emergency.
Download or read book Computational Hydraulics written by Michael B. Abbott and published by Pitman Publishing. This book was released on 1979 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific Computing and Algorithms in Industrial Simulations written by Michael Griebel and published by Springer. This book was released on 2017-10-30 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: The contributions gathered here provide an overview of current research projects and selected software products of the Fraunhofer Institute for Algorithms and Scientific Computing SCAI. They show the wide range of challenges that scientific computing currently faces, the solutions it offers, and its important role in developing applications for industry. Given the exciting field of applied collaborative research and development it discusses, the book will appeal to scientists, practitioners, and students alike. The Fraunhofer Institute for Algorithms and Scientific Computing SCAI combines excellent research and application-oriented development to provide added value for our partners. SCAI develops numerical techniques, parallel algorithms and specialized software tools to support and optimize industrial simulations. Moreover, it implements custom software solutions for production and logistics, and offers calculations on high-performance computers. Its services and products are based on state-of-the-art methods from applied mathematics and information technology.
Download or read book Cavitation of Hydraulic Machinery written by S C Li and published by World Scientific. This book was released on 2000-12-27 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume in the Hydraulic Machinery Book series deals with cavitation and its effects in turbines and pumps. After introducing cavitation and its relation with hydraulic machines, the invited contributors throughout the world review in detail relevant cavitation subjects from fundamental phenomena to various problems and solution measures in hydraulic machines. The authors are internationally recognized experts in their fields. Contents:Introduction (S C Li)Cavitation and Cavitation Types (A J Acosta)Bubble Dynamics: Single Bubble (A Shima)Bubble Dynamics: Multi-Bubbles (Stochastic Behaviour) (S C Li)Cavitating Flow (H Murai & E Outa)Cavitation Phenomena in Hydraulic Machinery (H Tanaka, R K Turton et al.)Cavitation Damage to Hydraulic Machinery (Y Iwai et al.)Cavitation Caused Vibrations (J Sato, P Henry et al.)Unsteady Cavitation Flows Caused by Machine Transients: Turbine Transients (C S Martin)Unsteady Cavitation Flows Caused by Machine Transients: Pump Transients (H Tsukamoto) Readership: Research engineers, academics, designers, and graduate and senior undergraduate students dealing with cavitation and cavitation-related problems in turbomachinery and devices.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1992 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hydraulic Engineering of Dams written by Willi H. Hager and published by CRC Press. This book was released on 2020-11-05 with total page 1081 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic engineering of dams and their appurtenant structures counts among the essential tasks to successfully design safe water-retaining reservoirs for hydroelectric power generation, flood retention, and irrigation and water supply demands. In view of climate change, especially dams and reservoirs, among other water infrastructure, will and have to play an even more important role than in the past as part of necessary mitigation and adaptation measures to satisfy vital needs in water supply, renewable energy and food worldwide as expressed in the Sustainable Development Goals of the United Nations. This book deals with the major hydraulic aspects of dam engineering considering recent developments in research and construction, namely overflow, conveyance and dissipations structures of spillways, river diversion facilities during construction, bottom and low-level outlets as well as intake structures. Furthermore, the book covers reservoir sedimentation, impulse waves and dambreak waves, which are relevant topics in view of sustainable and safe operation of reservoirs. The book is richly illustrated with photographs, highlighting the various appurtenant structures of dams addressed in the book chapters, as well as figures and diagrams showing important relations among the governing parameters of a certain phenomenon. An extensive literature review along with an updated bibliography complete this book.
Download or read book Water Resources Management written by Neil S. Grigg and published by John Wiley & Sons. This book was released on 2023-01-10 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water Resources Management A thorough and authoritative handbook to the foundations of water resources management In Water Resources Management: Principles, Methods, and Tools, distinguished engineer Dr. Neil S. Grigg delivers a comprehensive guide to the water resources industry, the technical methods and tools that professionals in that industry use, and the concepts and issues that animate the discipline. The author also provides expansive case studies that highlight real-world applications of the ideas discussed within. The book offers practical content, including discussion questions, practice problems, and project examples, while presenting a cross-disciplinary perspective ideal for those studying to be civil or environmental engineers, urban planners, environmental scientists, or professionals in other disciplines. Water Resources Management covers the foundational knowledge required by professionals working in the field alongside practical content that connects readers with how the discipline functions in the real world. It also includes: A thorough introduction to the framework of the water industry, including discussions of water resources and services for people and the environment In-depth explorations of technical methods and tools, including hydrology as the science of water accounting Fulsome discussions of water resources management concepts and issues, including models and data analytics to support decision-making Expansive treatments of water-related failures, accidents, and malevolent activity Perfect for civil and environmental engineering students studying water resources planning and management, Water Resources Management: Principles, Methods, and Tools will also earn a place in the libraries of practicing engineers, government officials, and consultants working in water management and policy.
