Download or read book Computer Modeling and Simulation of Manufacturing Processes written by American Society of Mechanical Engineers. Winter Annual Meeting and published by American Society of Mechanical Engineers. This book was released on 1990 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Unit Manufacturing Processes written by National Research Council and published by National Academies Press. This book was released on 1995-01-03 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing, reduced to its simplest form, involves the sequencing of product forms through a number of different processes. Each individual step, known as an unit manufacturing process, can be viewed as the fundamental building block of a nation's manufacturing capability. A committee of the National Research Council has prepared a report to help define national priorities for research in unit processes. It contains an organizing framework for unit process families, criteria for determining the criticality of a process or manufacturing technology, examples of research opportunities, and a prioritized list of enabling technologies that can lead to the manufacture of products of superior quality at competitive costs. The study was performed under the sponsorship of the National Science Foundation and the Defense Department's Manufacturing Technology Program.

Download or read book Simulations for Design and Manufacturing written by Uday S. Dixit and published by Springer. This book was released on 2018-04-19 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on numerical simulations of manufacturing processes, discussing the use of numerical simulation techniques for design and analysis of the components and the manufacturing systems. Experimental studies on manufacturing processes are costly, time consuming and limited to the facilities available. Numerical simulations can help study the process at a faster rate and for a wide range of process conditions. They also provide good prediction accuracy and deeper insights into the process. The simulation models do not require any pre-simulation, experimental or analytical results, making them highly suitable and widely used for the reliable prediction of process outcomes. The book is based on selected proceedings of AIMTDR 2016. The chapters discuss topics relating to various simulation techniques, such as computational fluid dynamics, heat flow, thermo-mechanical analysis, molecular dynamics, multibody dynamic analysis, and operational modal analysis. These simulation techniques are used to: 1) design the components, 2) to investigate the effect of critical process parameters on the process outcome, 3) to explore the physics of the process, 4) to analyse the feasibility of the process or design, and 5) to optimize the process. A wide range of advanced manufacturing processes are covered, including friction stir welding, electro-discharge machining, electro-chemical machining, magnetic pulse welding, milling with MQL (minimum quantity lubrication), electromagnetic cladding, abrasive flow machining, incremental sheet forming, ultrasonic assisted turning, TIG welding, and laser sintering. This book will be useful to researchers and professional engineers alike.

Download or read book Systems Modeling and Computer Simulation Second Edition written by Naim Kheir and published by CRC Press. This book was released on 1995-09-20 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition describes the fundamentals of modelling and simulation of continuous-time, discrete time, discrete-event and large-scale systems. Coverage new to this edition includes: a chapter on non-linear systems analysis and modelling, complementing the treatment of of continuous-time and discrete-time systems; and a chapter on the computer animation and visualization of dynamical systems motion.;College or university bookstores may order five or more copies at a special student price, available on request from Marcel Dekker Inc.

Download or read book Modeling and Optimization in Manufacturing written by Catalin I. Pruncu and published by John Wiley & Sons. This book was released on 2021-07-19 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover the state-of-the-art in multiscale modeling and optimization in manufacturing from two leading voices in the field Modeling and Optimization in Manufacturing delivers a comprehensive approach to various manufacturing processes and shows readers how multiscale modeling and optimization processes help improve upon them. The book elaborates on the foundations and applications of computational modeling and optimization processes, as well as recent developments in the field. It offers discussions of manufacturing processes, including forming, machining, casting, joining, coating, and additive manufacturing, and how computer simulations have influenced their development. Examples for each category of manufacturing are provided in the text, and industrial applications are described for the reader. The distinguished authors also provide an insightful perspective on likely future trends and developments in manufacturing modeling and optimization, including the use of large materials databases and machine learning. Readers will also benefit from the inclusion of: A thorough introduction to the origins of manufacturing, the history of traditional and advanced manufacturing, and recent progress in manufacturing An exploration of advanced manufacturing and the environmental impact and significance of manufacturing Practical discussions of the economic importance of advanced manufacturing An examination of the sustainability of advanced manufacturing, and developing and future trends in manufacturing Perfect for materials scientists, mechanical engineers, and process engineers, Modeling and Optimization in Manufacturing will also earn a place in the libraries of engineering scientists in industries seeking a one-stop reference on multiscale modeling and optimization in manufacturing.

Download or read book Modeling and Simulation of Discrete Event Systems written by Byoung Kyu Choi and published by John Wiley & Sons. This book was released on 2013-08-07 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer modeling and simulation (M&S) allows engineers to study and analyze complex systems. Discrete-event system (DES)-M&S is used in modern management, industrial engineering, computer science, and the military. As computer speeds and memory capacity increase, so DES-M&S tools become more powerful and more widely used in solving real-life problems. Based on over 20 years of evolution within a classroom environment, as well as on decades-long experience in developing simulation-based solutions for high-tech industries, Modeling and Simulation of Discrete-Event Systems is the only book on DES-M&S in which all the major DES modeling formalisms – activity-based, process-oriented, state-based, and event-based – are covered in a unified manner: A well-defined procedure for building a formal model in the form of event graph, ACD, or state graph Diverse types of modeling templates and examples that can be used as building blocks for a complex, real-life model A systematic, easy-to-follow procedure combined with sample C# codes for developing simulators in various modeling formalisms Simple tutorials as well as sample model files for using popular off-the-shelf simulators such as SIGMA®, ACE®, and Arena® Up-to-date research results as well as research issues and directions in DES-M&S Modeling and Simulation of Discrete-Event Systems is an ideal textbook for undergraduate and graduate students of simulation/industrial engineering and computer science, as well as for simulation practitioners and researchers.

Download or read book Simulation of Manufacturing Systems written by Allan Carrie and published by John Wiley & Sons. This book was released on 1988 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stohastic simulation; Discrete simulation; A job shop modell with material handling; Simulation software; Flexible manufacturing systems; Load-unload operations, pallets, machines; Machine buffers and central pallet storage; Operation sequences, fixtures and tools; Vehicle and movement durations; Robots, conveyors and AS/RS systems; Simulation projects; Some developments in simulation.Index.

Download or read book Creating Computer Simulation Systems written by Dr. Frederick Kuhl and published by Prentice Hall. This book was released on 2000 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an introduction to the High Level Architecture for modeling and simulation. The HLA is a software architecture for creating computer models and simulation out of component models or simulations. HLA was adopted by the US Defense Dept. The book is an introduction to HLA for application developers.

Download or read book Modeling and Simulation in Industrial Engineering written by Mangey Ram and published by Springer. This book was released on 2017-08-11 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the latest research developments in modeling and simulation in industrial engineering. Topics such as decision and performance analysis and industrial control systems are described. Case studies in industry and services as well as engineering economy and cost estimation are also covered.

Download or read book Modeling Simulation and Control of Flexible Manufacturing Systems written by MengChu Zhou and published by World Scientific. This book was released on 1999 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: One critical barrier leading to successful implementation of flexible manufacturing and related automated systems is the ever-increasing complexity of their modeling, analysis, simulation, and control. Research and development over the last three decades has provided new theory and graphical tools based on Petri nets and related concepts for the design of such systems. The purpose of this book is to introduce a set of Petri-net-based tools and methods to address a variety of problems associated with the design and implementation of flexible manufacturing systems (FMSs), with several implementation examples.There are three ways this book will directly benefit readers. First, the book will allow engineers and managers who are responsible for the design and implementation of modern manufacturing systems to evaluate Petri nets for applications in their work. Second, it will provide sufficient breadth and depth to allow development of Petri-net-based industrial applications. Third, it will allow the basic Petri net material to be taught to industrial practitioners, students, and academic researchers much more efficiently. This will foster further research and applications of Petri nets in aiding the successful implementation of advanced manufacturing systems.

Download or read book Theory of Modeling and Simulation written by Bernard P. Zeigler and published by Academic Press. This book was released on 2000-01-10 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increased computational power and software tools available to engineers have increased the use and dependence on modeling and computer simulation throughout the design process. These tools have given engineers the capability of designing highly complex systems and computer architectures that were previously unthinkable. Every complex design project, from integrated circuits, to aerospace vehicles, to industrial manufacturing processes requires these new methods. This book fulfills the essential need of system and control engineers at all levels in understanding modeling and simulation. This book, written as a true text/reference has become a standard sr./graduate level course in all EE departments worldwide and all professionals in this area are required to update their skills. The book provides a rigorous mathematical foundation for modeling and computer simulation. It provides a comprehensive framework for modeling and simulation integrating the various simulation approaches. It covers model formulation, simulation model execution, and the model building process with its key activities model abstraction and model simplification, as well as the organization of model libraries. Emphasis of the book is in particular in integrating discrete event and continuous modeling approaches as well as a new approach for discrete event simulation of continuous processes. The book also discusses simulation execution on parallel and distributed machines and concepts for simulation model realization based on the High Level Architecture (HLA) standard of the Department of Defense. Presents a working foundation necessary for compliance with High Level Architecture (HLA) standards Provides a comprehensive framework for continuous and discrete event modeling and simulation Explores the mathematical foundation of simulation modeling Discusses system morphisms for model abstraction and simplification Presents a new approach to discrete event simulation of continuous processes Includes parallel and distributed simulation of discrete event models Presents a concept to achieve simulator interoperability in the form of the DEVS-Bus

Download or read book Business Process Modeling Simulation and Design Second Edition written by Manuel Laguna and published by CRC Press. This book was released on 2013-04-25 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most textbooks on business process management focus on either the nuts and bolts of computer simulation or the managerial aspects of business processes. Covering both technical and managerial aspects of business process management, Business Process Modeling, Simulation and Design, Second Edition presents the tools to design effective business processes and the management techniques to operate them efficiently. New to the Second Edition Three completely revised chapters that incorporate ExtendSim 8 An introduction to simulation A chapter on business process analytics Developed from the authors’ many years of teaching process design and simulation courses, the text provides students with a thorough understanding of numerous analytical tools that can be used to model, analyze, design, manage, and improve business processes. It covers a wide range of approaches, including discrete event simulation, graphical flowcharting tools, deterministic models for cycle time analysis and capacity decisions, analytical queuing methods, and data mining. Unlike other operations management books, this one emphasizes user-friendly simulation software as well as business processes, rather than only manufacturing processes or general operations management problems. Taking an analytical modeling approach to process design, this book illustrates the power of simulation modeling as a vehicle for analyzing and designing business processes. It teaches how to apply process simulation and discusses the managerial implications of redesigning processes. The ExtendSim software is available online and ancillaries are available for instructors.

Download or read book Simulation of Additive Manufacturing using Meshfree Methods written by Christian Weißenfels and published by Springer Nature. This book was released on 2021-10-29 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a detailed instruction to virtually reproduce the processes of Additive Manufacturing on a computer. First, all mathematical equations needed to model these processes are presented. Due to their flexibility, meshfree methods represent optimal computational solution schemes to simulate Additive Manufacturing processes. On the other hand, these methods usually do not guarantee an accurate solution. For this reason, this monograph is dedicated in detail to the necessary criteria for computational solution schemes to provide accurate results. Several meshfree methods are examined with respect to these conditions. Two different 3D printing techniques are presented in detail. The results obtained from the simulation are investigated and compared with experimental data. This work is addressed to both scientists and professionals working in the field of development who are interested to learn the secrets behind meshfree methods or get into the modeling of Additive Manufacturing.

Download or read book Modeling and Simulation in the Systems Engineering Life Cycle written by Margaret L. Loper and published by Springer. This book was released on 2015-04-30 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: This easy to read text provides a broad introduction to the fundamental concepts of modeling and simulation (M&S) and systems engineering, highlighting how M&S is used across the entire systems engineering lifecycle. Features: reviews the full breadth of technologies, methodologies and uses of M&S, rather than just focusing on a specific aspect of the field; presents contributions from specialists in each topic covered; introduces the foundational elements and processes that serve as the groundwork for understanding M&S; explores common methods and methodologies used in M&S; discusses how best to design and execute experiments, covering the use of Monte Carlo techniques, surrogate modeling and distributed simulation; explores the use of M&S throughout the systems development lifecycle, describing a number of methods, techniques, and tools available to support systems engineering processes; provides a selection of case studies illustrating the use of M&S in systems engineering across a variety of domains.

Download or read book Computer Modeling for Injection Molding written by Huamin Zhou and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a wide range of applications and uses of simulation and modeling techniques in polymer injection molding, filling a noticeable gap in the literature of design, manufacturing, and the use of plastics injection molding. The authors help readers solve problems in the advanced control, simulation, monitoring, and optimization of injection molding processes. The book provides a tool for researchers and engineers to calculate the mold filling, optimization of processing control, and quality estimation before prototype molding.

Download or read book Electronics Process Technology written by Wilfried Sauer and published by Springer Science & Business Media. This book was released on 2007-04-21 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systemized presentation of new techniques and methods in electronics manufacture. It helps the reader reduce the cost and increase the reliability of electronic products by employing up-to-date technology. It also details the latest ideas for reducing the scale of electronic components and products to the nano-scale by organizing all the elements of the complicated modern electronics manufacturing process showing how they affect each other.

Download or read book Manufacturing Systems written by National Academy of Engineering and published by National Academies Press. This book was released on 1992-02-01 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Some 70 percent of U.S. manufacturing output currently faces direct foreign competition. While American firms understand the individual components of their manufacturing processes, they must begin to work with manufacturing systems to develop world-class capabilities. This new book identifies principles-termed foundations-that have proved effective in improving manufacturing systems. Authored by an expert panel, including manufacturing executives, the book provides recommendations for manufacturers, leading to specific action in three areas: Management philosophy and practice. Methods used to measure and predict the performance of systems. Organizational learning and improving system performance through technology. The volume includes in-depth studies of several key issues in manufacturing, including employee involvement and empowerment, using learning curves to improve quality, measuring performance against that of the competition, focusing on customer satisfaction, and factory modernization. It includes a unique paper on jazz music as a metaphor for participative manufacturing management. Executives, managers, engineers, researchers, faculty, and students will find this book an essential tool for guiding this nation's businesses toward developing more competitive manufacturing systems.