Download or read book Computer Methods in Biomechanics and Biomedical Engineering 2 written by J. Middleton and published by CRC Press. This book was released on 2020-09-10 with total page 852 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains papers presented at the Third International Symposium on Computer Methods in Biomechanics and Biomedical Engineering (1997), which provide evidence that computer-based models, and in particular numerical methods, are becoming essential tools for the solution of many problems encountered in the field of biomedical engineering. The range of subject areas presented include the modeling of hip and knee joint replacements, assessment of fatigue damage in cemented hip prostheses, nonlinear analysis of hard and soft tissue, methods for the simulation of bone adaptation, bone reconstruction using implants, and computational techniques to model human impact. Computer Methods in Biomechanics and Biomedical Engineering also details the application of numerical techniques applied to orthodontic treatment together with introducing new methods for modeling and assessing the behavior of dental implants, adhesives, and restorations. For more information, visit the "http://www.uwcm.ac.uk/biorome/international symposium on Computer Methods in Biomechanics and Biomedical Engineering/home page, or "http://www.gbhap.com/Computer_Methods_Biomechanic s_Biome dical_Engineering/" the home page for the journal.
Download or read book Computer Methods in Biomechanics and Biomedical Engineering II written by Wafa Skalli and published by Springer Nature. This book was released on with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computer Methods in Biomechanics and Biomedical Engineering written by J. Middleton and published by CRC Press. This book was released on 1996-03-18 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: These papers are concerned with new advances and novel solutions in the areas of biofluids, image-guided surgery, tissue engineering and cardovascular mechanics, implant analysis, soft tissue mechanics, bone remodeling and motion analysis. The contents also feature a special section on dental materials, dental adhesives and orthodontic mechanics. This edition contains many examples, tables and figures, and together with the many references, provides the reader with invaluable information on the latest theoretical developments and applications.
Download or read book Computational Biomechanics written by Masao Tanaka and published by Springer Science & Business Media. This book was released on 2012-06-16 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid developments have taken place in biological/biomedical measurement and imaging technologies as well as in computer analysis and information technologies. The increase in data obtained with such technologies invites the reader into a virtual world that represents realistic biological tissue or organ structures in digital form and allows for simulation and what is called “in silico medicine.” This volume is the third in a textbook series and covers both the basics of continuum mechanics of biosolids and biofluids and the theoretical core of computational methods for continuum mechanics analyses. Several biomechanics problems are provided for better understanding of computational modeling and analysis. Topics include the mechanics of solid and fluid bodies, fundamental characteristics of biosolids and biofluids, computational methods in biomechanics analysis/simulation, practical problems in orthopedic biomechanics, dental biomechanics, ophthalmic biomechanics, cardiovascular biomechanics, hemodynamics, cell mechanics, and model-, rule-, and image-based methods in computational biomechanics analysis and simulation. The book is an excellent resource for graduate school-level engineering students and young researchers in bioengineering and biomedicine.
Download or read book Computer Methods in Biomechanics and Biomedical Engineering written by Amit Gefen and published by Springer. This book was released on 2017-08-29 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume collects the research results presented at the 14th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Tel Aviv, Israel, 2016. The topical focus includes, but is not limited to, cardiovascular fluid dynamics, computer modeling of tissue engineering, skin and spine biomechanics, as well as biomedical image analysis and processing. The target audience primarily comprises research experts in the field of bioengineering, but the book may also be beneficial for graduate students alike.
Download or read book Computational Biomechanics written by Kozaburo Hayashi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: The combination of readily available computing power and progress in numerical techniques has made nonlinear systems - the kind that only a few years ago were ignored as too complex - open to analysis for the first time. Now realistic models of living systems incorporating the nonlinear variation and anisotropic nature of physical properties can be solved numerically on modern computers to give realistically usable results. This has opened up new and exciting possibilities for the fusing of ideas from physiology and engineering in the burgeoning new field that is biomechanics. Computational Biomechanics presents pioneering work focusing on the areas of orthopedic and circulatory mechanics, using experimental results to confirm or improve the relevant mathematical models and parameters. Together with two companion volumes, Biomechanics: Functional Adaptation and Remodeling and the Data Book on Mechanical Properties of Living Cells, Tissues, and Organs, this monograph will prove invaluable to those working in fields ranging from medical science and clinical medicine to biomedical engineering and applied mechanics.
Download or read book Computational Bioengineering written by M. Cerrolaza and published by Imperial College Press. This book was released on 2004 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a significant contribution to the state of the art in the field of computational bioengineering from the need for a living human database to meshless methods in biomechanics, from computational mechanobiology to the evaluation of stresses in hip prosthesis replacement, from lattice Boltzmann methods for analyzing blood flow to the analysis of fluid movement in long bones, among other interesting topics treated herein. Well-known international experts in bioengineering have contributed to the book, giving it a unique style and cutting-edge material for graduate students, academic researchers and design bioengineers, as well as those interested in getting a better understanding of such complex and fascinating human and living processes.
Download or read book Computational Bioengineering and Bioinformatics written by Nenad Filipovic and published by Springer. This book was released on 2021-03-12 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the latest and most relevant topics in the field of computational bioengineering and bioinformatics, with a particular focus on patient-specific, disease-progression modeling. It covers computational methods for cardiovascular disease prediction, with an emphasis on biomechanics, biomedical decision support systems, data mining, personalized diagnostics, bio-signal processing, protein structure prediction, biomedical image processing, analysis and visualization, and high-performance computing. It also discusses state-of-the-art tools for disease characterization, and recent advances in areas such as biomechanics, cardiovascular engineering, patient-specific modeling, population-based modeling, multiscale modeling, image processing, data mining, biomedical decision-support systems, signal processing, biomaterials and dental biomechanics, tissue and cell engineering, computational chemistry and high-performance computing. As such, it is a valuable resource for researchers, medical and bioengineering students, and medical device and software experts
Download or read book Computational Biomechanics for Medicine written by Adam Wittek and published by Springer Nature. This book was released on with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Numerical Methods in Biomedical Engineering written by Stanley Dunn and published by Elsevier. This book was released on 2005-11-21 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Modeling in Biomedical Engineering brings together the integrative set of computational problem solving tools important to biomedical engineers. Through the use of comprehensive homework exercises, relevant examples and extensive case studies, this book integrates principles and techniques of numerical analysis. Covering biomechanical phenomena and physiologic, cell and molecular systems, this is an essential tool for students and all those studying biomedical transport, biomedical thermodynamics & kinetics and biomechanics. - Supported by Whitaker Foundation Teaching Materials Program; ABET-oriented pedagogical layout - Extensive hands-on homework exercises
Download or read book Innovations in Biomedical Engineering written by Marek Gzik and published by Springer Nature. This book was released on 2022-05-31 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest developments in the field of biomedical engineering and includes practical solutions and strictly scientific considerations. The development of new methods of treatment, advanced diagnostics or personalized rehabilitation requires close cooperation of experts from many fields, including, among others, medicine, biotechnology and finally biomedical engineering. The latter, combining many fields of science, such as computer science, materials science, biomechanics, electronics not only enables the development and production of modern medical equipment, but also participates in the development of new directions and methods of treatment. The presented monograph is a collection of scientific papers on the use of engineering methods in medicine. The topics of the work include both practical solutions and strictly scientific considerations expanding knowledge about the functioning of the human body. We believe that the presented works will have an impact on the development of the field of science, which is biomedical engineering, constituting a contribution to the discussion on the directions of development of cooperation between doctors, physiotherapists and engineers. We would also like to thank all the people who contributed to the creation of this monograph—both the authors of all the works and those involved in technical works.
Download or read book Biodental Engineering III written by R.M. Natal Jorge and published by CRC Press. This book was released on 2014-06-11 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dentistry is a branch of medicine with its own peculiarities and very diverse areas of action, which means that it can be considered as an interdisciplinary field. Currently the use of new techniques and technologies receives much attention. Biodental Engineering III contains contributions from 13 countries, which were presented at BIODENTAL 2014,
Download or read book Biomechanics written by Cees Oomens and published by Cambridge University Press. This book was released on 2018-02-08 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thoroughly revised and updated for the second edition, this comprehensive textbook integrates basic and advanced concepts of mechanics with numerical methods and biomedical applications. Coverage is expanded to include a complete introduction to vector and tensor calculus, and new or fully updated chapters on biological materials and continuum mechanics, motion, deformation and rotation, and constitutive modelling of solids and fluids. Topics such as kinematics, equilibrium, and stresses and strains are also included, as well as the mechanical behaviour of fibres and the analysis of one-dimensional continuous elastic media. Numerical solution procedures based on the Finite Element Method are presented, with accompanying MATLAB-based software and dozens of new biomedical engineering examples and exercises allowing readers to practise and improve their skills. Solutions for instructors are also available online. This is the definitive guide for both undergraduate and graduate students taking courses in biomechanics.
Download or read book Finite Element Analysis for Biomedical Engineering Applications written by Z. Yang and published by CRC Press. This book was released on 2019-03-14 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finite element analysis has been widely applied to study biomedical problems. This book aims to simulate some common medical problems using finite element advanced technologies, which establish a base for medical researchers to conduct further investigations. This book consists of four main parts: (1) bone, (2) soft tissues, (3) joints, and (4) implants. Each part starts with the structure and function of the biology and then follows the corresponding finite element advanced features, such as anisotropic nonlinear material, multidimensional interpolation, XFEM, fiber enhancement, UserHyper, porous media, wear, and crack growth fatigue analysis. The final section presents some specific biomedical problems, such as abdominal aortic aneurysm, intervertebral disc, head impact, knee contact, and SMA cardiovascular stent. All modeling files are attached in the appendixes of the book. This book will be helpful to graduate students and researchers in the biomedical field who engage in simulations of biomedical problems. The book also provides all readers with a better understanding of current advanced finite element technologies. Details finite element modeling of bone, soft tissues, joints, and implants Presents advanced finite element technologies, such as fiber enhancement, porous media, wear, and crack growth fatigue analysis Discusses specific biomedical problems, such as abdominal aortic aneurysm, intervertebral disc, head impact, knee contact, and SMA cardiovascular stent Explains principles for modeling biology Provides various descriptive modeling files
Download or read book Constrained Optimization and Optimal Control for Partial Differential Equations written by Günter Leugering and published by Springer Science & Business Media. This book was released on 2012-01-03 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: This special volume focuses on optimization and control of processes governed by partial differential equations. The contributors are mostly participants of the DFG-priority program 1253: Optimization with PDE-constraints which is active since 2006. The book is organized in sections which cover almost the entire spectrum of modern research in this emerging field. Indeed, even though the field of optimal control and optimization for PDE-constrained problems has undergone a dramatic increase of interest during the last four decades, a full theory for nonlinear problems is still lacking. The contributions of this volume, some of which have the character of survey articles, therefore, aim at creating and developing further new ideas for optimization, control and corresponding numerical simulations of systems of possibly coupled nonlinear partial differential equations. The research conducted within this unique network of groups in more than fifteen German universities focuses on novel methods of optimization, control and identification for problems in infinite-dimensional spaces, shape and topology problems, model reduction and adaptivity, discretization concepts and important applications. Besides the theoretical interest, the most prominent question is about the effectiveness of model-based numerical optimization methods for PDEs versus a black-box approach that uses existing codes, often heuristic-based, for optimization.
Download or read book DHM and Posturography written by Sofia Scataglini and published by Academic Press. This book was released on 2019-08-22 with total page 862 pages. Available in PDF, EPUB and Kindle. Book excerpt: DHM and Posturography explores the body of knowledge and state-of-the-art in digital human modeling, along with its application in ergonomics and posturography. The book provides an industry first introductory and practitioner focused overview of human simulation tools, with detailed chapters describing elements of posture, postural interactions, and fields of application. Thus, DHM tools and a specific scientific/practical problem – the study of posture – are linked in a coherent framework. In addition, sections show how DHM interfaces with the most common physical devices for posture analysis. Case studies provide the applied knowledge necessary for practitioners to make informed decisions. Digital Human Modelling is the science of representing humans with their physical properties, characteristics and behaviors in computerized, virtual models. These models can be used standalone, or integrated with other computerized object design systems, to design or study designs, workplaces or products in their relationship with humans. - Presents an introductory, up-to-date overview and introduction to all industrially relevant DHM systems that will enable users on trialing, procurement decisions and initial applications - Includes user-level examples and case studies of DHM application in various industrial fields - Provides a structured and posturography focused compendium that is easy to access, read and understand
Download or read book 8th International Conference on the Development of Biomedical Engineering in Vietnam written by Vo Van Toi and published by Springer Nature. This book was released on 2021-08-25 with total page 1042 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents cutting-edge research and developments in the field of biomedical engineering, with a special emphasis on results achieved in Vietnam and neighboring low- and middle-income countries. Covering both fundamental and applied research, and focusing on the theme “Healthcare technology for smart city in low- and middle-income countries,” it reports on the design, fabrication, and application of low-cost and portable medical devices, IoT devices, and telemedicine systems, on improved methods for biological data acquisition and analysis, on nanomaterials for biological applications, and on new achievements in biomechanics, tissue engineering, and regeneration. It describes the developments of molecular and cellular biology techniques, and statistical and computational methods, including artificial intelligence, for biomedical applications, covers key public/occupational health issues and reports on cutting-edge neuroengineering techniques. Gathering the proceedings of the 8th International Conference on The Development of Biomedical Engineering in Vietnam, BME 8, 2020, Vietnam, the book offers important answers to current challenges in the field and a source of inspiration for scientists, engineers, and researchers with various backgrounds working in different research institutes, companies, and countries.
