Download or read book Computer Methods and Experimental Measurements for Surface Effects and Contact Mechanics VIII written by J. T. M. de Hosson and published by WIT Press. This book was released on 2007 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of contact and surface problems in modern engineering and their combined effects has led to the Eighth International Conference on Computer Methods and Experimental Measurements for Surface and Contact Mechanics. Nowadays the importance of contact and surface problems in many technological fields is well understood: they are complex and inherently non-linear due to their moving boundaries and the different properties of materials, particularly along the contact surfaces. Structural components fail from wear, corrosion, high cycle fatigue etc., that is to say affected and initiated by the surface conditions. The use of surface treatments can reduce the cost of components and extend the life of the elements. Their effect is of particular importance in the case of surfaces undergoing contact, a problem which is addressed throughout the book. Topics featured: Surface Treatment; Surface problems in Contact Mechanics; Fracture Mechanics; Coupled analysis and experiments; Thin Coatings; Thick Coatings; Contact Mechanics; Material Surface in Contact; Applications and Case Studies.
Download or read book Computer Methods and Experimental Measurements for Surface Effects and Contact Mechanics VII written by J. T. M. de Hosson and published by Computational Mechanics. This book was released on 2005 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The research activities in the field of surface engineering have been greatly driven by the realization that the surface is usually the most important part of any engineering component. The scientific research featured deals with fundamental and applied concepts of surface engineering, in particular focusing on the interplay between applied physics, materials science and engineering, computational mechanics and mechanical engineering. The book is devoted to fundamental and applied studies of four interconnected aspects: processing, microstructural features, functional performance as well as the design of an appropriate theoretical and predictive framework of protective surfaces.
Download or read book Computer Methods and Experimental Measurements for Surface Effects and Contact Mechanics VII written by J. T. M. de Hosson and published by Computational Mechanics. This book was released on 2005 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: The research activities in the field of surface engineering have been greatly driven by the realization that the surface is usually the most important part of any engineering component. The scientific research featured deals with fundamental and applied concepts of surface engineering, in particular focusing on the interplay between applied physics, materials science and engineering, computational mechanics and mechanical engineering. The book is devoted to fundamental and applied studies of four interconnected aspects: processing, microstructural features, functional performance as well as the design of an appropriate theoretical and predictive framework of protective surfaces.
Download or read book Surface Effects and Contact Mechanics X written by J. T. M. De Hosson and published by WIT Press. This book was released on 2011 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contact mechanics and surface effects, as well as their interaction, are important in modern engineering. The life and performance of structural components is affected by surface conditions such as wear, corrosion and, high cycle fatigue. Surface treatments that address contact conditions can reduce costs by extending the life of components. These are the subjects of a biennial conference first held in 1993, the papers from the latest of which are collected in this volume. The book discusses Computer simulation; Surface modification; Surface treatments; Surface problems in contact mechanics; Contact mechanics; Applications and case studies; Indentation and hardness; Thick and thin coatings; Corrosion problems; Nano-characterisation; Test methodology; Multiscale experiments and modelling; and Fracture fatigue and mechanics.
Download or read book Surface Effects and Contact Mechanics XI written by J. Th. M. De Hosson and published by WIT Press. This book was released on 2013 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing the papers from the eleventh biennial conference on the topic, first held in 1993, this book covers contact mechanics and surface effects and their interaction, so important in modern engineering. The life and performance of structural components is affected by surface conditions such as wear, corrosion and, high cycle fatigue. Surface treatments that address contact conditions can reduce costs by extending the life of components. Hence the importance of the conference discussions.The book's papers cover such matters as Experimental and measurement tests; Fracture fatigue and mechanics; Surface modification; Surface problems in contact mechanics; Thick and thin coatings; Heat transfers; Multiscale experiments and modelling; Computer simulation; Biocompatible materials; Vacuum technologies; Residual stress problems; Tribomechanics; Case studies.
Download or read book Surface Effects and Contact Mechanics IX written by J. T. M. de Hosson and published by WIT Press. This book was released on 2009 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experiments, and discusses the following topics: Surface treatments; Thick coatings; Thin coatings; Surface problems in contact mechanics; Indentation and hardness; Fatigue; Numerical analysis; Applications and case studies." --Book Jacket.
Download or read book Computational Methods and Experiments in Materials Characterization III written by C. A. Brebbia and published by WIT Press. This book was released on 2007 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until recently, engineering materials could be characterized successfully using relatively simple testing procedures. As materials technology advances, interest is growing in materials possessing complex meso-, micro- and nano-structures, which to a large extent determine their physical properties and behaviour. The purposes of materials modelling are many: optimization, investigation of failure, simulation of production processes, to name but a few. Modelling and characterisation are closely intertwined, increasingly so as the complexity of the material increases. Characterisation, in essence, is the connection between the abstract material model and the real-world behaviour of the material in question. Characterisation of complex materials therefore may require a combination of experimental techniques and computation. This book publishes papers presented at the Third International Conference on Computational Methods and Experiments in Material Characterisation.Topics covered include: Composites; Ceramics; Alloys; Cements and Cement Based Materials; Biomaterials; Thin Films and Coatings; Advanced Materials; Imaging Analysis; Thermal Analysis; New Methods; Surface Chemistry, Nano Indentation; Continuum Methods; Particle Models; Damage Mechanics; Innovative Techniques; Stochastic Methods.
Download or read book Surface Effects and Contact Mechanics including Tribology XII written by J.Th.M. De Hossen and published by WIT Press. This book was released on 2015-04-21 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains papers from the twelfth in a series of biennial conferences, first held in 1993, on the topics of contact mechanics and surface effects and their interaction. In general, structural components fail by wear, corrosion and fatigue, that is to say affected and initiated by surface conditions. Consequently, it is often appropriate to modify the surface layer of a base material or coat it, so as to provide an enhanced performance or longer life. However, in many cases it is the combined effect of wear and corrosion that is damaging, contributing to complexity in determining the proper approach. The surface treatment chosen should be suitably related to the problem to be solved. The necessary thickness of the coating depends largely on the applied loading and environmental conditions. The papers in the book address novel protective layers for advances in sliding wear and low friction. The contents cover topics such as: Experimental and Measurement Tests; Surface Modification; Surface Problems in Contact Mechanics; Thick and Thin Coatings; Tribomechanics; Computer Simulation.
Download or read book Simulation of Electrochemical Processes II written by V.G. DeGiorgi and published by WIT Press. This book was released on 2007-04-10 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains papers presented at the Second International Conference in this successful series, which presents and discusses the state-of-the-art on the computer simulation of corrosion, electrochemical processes and the electrical and electromagnetic fields associated with them.Modern industry applies a wide range of electrochemical processes to protect against corrosion, provide surface treatments and to manufacture products. This book focuses on the computer modelling of these industrial processes and techniques by examining the developments of computational models and their application in practice.Featured topics include: Cathodic Protection Systems; Modelling Methodologies; Electrodeposition and Electroforming; Modelling of Coatings; Modelling Stress Corrosion, Cracking and Corrosion Fatigue; Modelling and Corrosion of Surface Coatings; Interference and Signature Control; Anodic Protection; Electrocoating and Plating; Optimisation of Control Systems; Detection and Monitoring of Corrosion; Measurement Techniques; Fuel on Photovoltaic Cells; Electrolysis Reactors; Comparison of Experimental Measurements and Computer results, Case Studies.
Download or read book Advances in Laser Materials Processing written by Jonathan R. Lawrence and published by Elsevier. This book was released on 2010-07-27 with total page 865 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of its capacity for continuous development and flexibility of use, the laser has become a mainstream manufacturing tool in many industrial sectors. This timely book relays the state-of-the-art in laser materials processing technology and applications and likely advances to be made from current research taking place around the world. The book also promotes appreciation for laser applications in a variety of industrial sectors. After two introductory chapters, the book reviews the main areas of laser processing. Starting with laser cutting and machining, the book discusses laser welding, annealing and hardening. It then considers surface treatment, coating and materials deposition as well as other engineering techniques such as peening and net-shape engineering, before discussing laser micro and nano-fabrication techniques. The book concludes by looking at modelling and process control. With its distinguished editorial team and contributions from renowned researchers working in every corner of the globe, Advances in laser materials processing provides a comprehensive yet detailed coverage of the many topics that comprise the field of laser materials processing. It provides a reference source for the scientists and engineers in such areas as metals processing and microelectronics, as well those conducting laser materials processing research in either academia or industry. A comprehensive practitioner guide and reference work explaining state-of-the-art laser processing technologies in manufacturing and other disciplines Explores the challenges, potential and future directions through the continuous development of new, application-specific lasers in materials processing Discusses coatings and material deposition with lasers with including the production of coatings by laser-assisted processes, laser direct metal deposition and laser induced forward transfer (LIFT)
Download or read book Surface Treatment written by M. H. Aliabadi and published by Computational Mechanics. This book was released on 1997 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Demonstrates how engineers can benefit from the use of surface treatments in drastically reducing the cost of expensive components when prolonging the existing lifetime of structural components or increasing the load-carrying capacity for the same.
Download or read book Computational Methods and Experimental Measurements XIII written by C. A. Brebbia and published by WIT Press. This book was released on 2007 with total page 929 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing papers presented at the Thirteenth International Conference in this well established series on (CMEM) Computational Methods and Experimental Measurements. These proceedings review state-of-the-art developments on the interaction between numerical methods and experimental measurements.Featured topics include: Computational and Experimental Methods; Experimental and Computaqional Analysis; Computer Interaction and Control of Experiments; Direct, Indirect and In-Situ Measurements; Particle Methods; Structural and Stress Analysis; Structural Dynamics; Dynamics and Vibrations; Electrical and Electromagnetic Applications; Biomedical Applications; Heat Transfer; Thermal Processes; Fluid Flow; Data Acquisition; Remediation and Processing and Industrial Applications.
Download or read book Multi body Dynamic Modeling of Multi legged Robots written by Abhijit Mahapatra and published by Springer Nature. This book was released on 2020-02-27 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the development of an integrated approach for generating the path and gait of realistic hexapod robotic systems. It discusses in detail locomation with straight-ahead, crab and turning motion capabilities in varying terrains, like sloping surfaces, staircases, and various user-defined rough terrains. It also presents computer simulations and validation using Virtual Prototyping (VP) tools and real-world experiments. The book also explores improving solutions by applying the developed nonlinear, constrained inverse dynamics model of the system formulated as a coupled dynamical problem based on the Newton–Euler (NE) approach and taking into account realistic environmental conditions. The approach is developed on the basis of rigid multi-body modelling and the concept that there is no change in the configuration of the system in the short time span of collisions.
Download or read book Computational Methods and Experimental Measurements XV written by G. M. Carlomagno and published by WIT Press. This book was released on 2011 with total page 737 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing edited versions of most of the papers presented at the Fifteenth International Conference on Computational Methods and Experimental Measurements, this book reviews the latest work on these two approaches, and the interaction between them.
Download or read book Materials Characterisation IV written by Andrea Alberto Mammoli and published by WIT Press. This book was released on 2009 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until recently, engineering materials could be characterised successfully using relatively simple testing procedures. As materials technology advances, interest is growing in materials possessing complex meso-, micro- and nano-structures, which to a large extent determine their physical properties and behaviour. The purposes of materials modelling are many - optimisation, investigation of failure, simulation of production processes, to name a few. Modelling and characterisation are closely intertwined, increasingly so as the complexity of the material increases. Characterisation, in essence, is the connection between the abstract material model and the real-world behaviour of the material in question. Characterisation of complex materials therefore may require a combination of experimental techniques and computation. This book contains papers from the Fourth International Conference on Computational Methods and Experiments in Materials Characterisation which brought researchers who use computational methods, those who perform experiments, and of course those who do both, in all areas of materials characterisation, to discuss their recent results and ideas, in order to foster the multidisciplinary approach that has become necessary for the study of complex phenomena.
Download or read book Computer Methods and Experimental Measurements for Surface Treatment Effects written by M. H. Aliabadi and published by WIT Press (UK). This book was released on 1993 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface treatments are receiving increased attention by the engineering community in order to reduce the cost of expensive components used in critical applications as well as extending the useful lifetime of existing structural components, or increasing the load carrying capacity for the same life. This book forms the proceedings of the first international conference - Surface Treatment '93 - which covered computer methods and experimental measurements for surface treatment effects. The purpose of this conference was to promote international co-operation among scientists and engineers in this multidisciplinary field to assist in a better understanding of its influence on fatigue fracture. The book concentrates on topics such as cold working, in particular, shot peening, cold expansion and cold rolling, as well as laser treatment effects, surface preparation and protection, coating processes and surface integrity.
Download or read book Surface Effects and Contact Mechanics XI written by J. Th. M. De Hosson and published by . This book was released on 2013-06-01 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing the papers from the eleventh biennial conference on the topic, first held in 1993, this book covers contact mechanics and surface effects and their interaction, so important in modern engineering. The life and performance of structural components is affected by surface conditions such as wear, corrosion and, high cycle fatigue. Surface treatments that address contact conditions can reduce costs by extending the life of components. Hence the importance of the conference discussions.