Download or read book Automation Production Systems and Computer integrated Manufacturing written by Mikell P. Groover and published by Prentice Hall. This book was released on 2008 with total page 832 pages. Available in PDF, EPUB and Kindle. Book excerpt: This exploration of the technical and engineering aspects of automated production systems provides a comprehensive and balanced coverage of the subject. It covers cutting-edge technologies of production automation and material handling, and how these technologies are used to construct modern manufacturing systems.
Download or read book Computer Assisted Management and Control of Manufacturing Systems written by Spyros G. Tzafestas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modem manufacturing systems involve many processes and operations that can be monitored and controlled at several levels of intelligence. At the highest level there is a computer that supervises the various manufacturing functions, whereas at the lowest level there are stand alone computer controlled systems of manufacturing processes and robotic cells. Until recenty computer-aided manufacturing systems constituted isolated "islands" of automation, each oriented to a particular application, but present day systems offer integrated approaches to manufacturing and enterprise operations. These modem systems, known as computer-integrated manufacturing (CIM) systems, can easily meet the current performance and manufacturing competitiveness requirements under strong environmental changes. CIM systems are much of a challenge, and imply a systemic approach to the design and operation of a manufacturing enterprise. Actualy, a CIM system must take into account in a unified way the following three views : the user view, the technology view, and the enterprise view. This means that CIM includes both the engineering and enterprise planning and control activities, as well as the information flow activities across all the stages of the system.
Download or read book Computer Integrated Manufacturing written by Kiyoji Asai and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Current state of expectations is that Computer Integrated Manufacturing (CIM) will ulti mately determine the industrial growth of world nations within the next few decades. Computer Aided Design (CAD), Computer Aided Manufacturing (CAM), Flexible Manufacturing Systems (FMS), Robotics together with Knowledge and Information Based Systems (KIBS) and Com munication Networks are expected to develop to a mature state to respond effectively to the managerial requirements of the factories of the future that are becoming highly integrated and complex. CIM represents a new production approach which will allow the factories to deliver a high variety of products at a low cost and with short production cycles. The new technologies for CIM are needed to develop manufacturing environments that are smarter, faster, close-cou pled, integrated, optimized, and flexible. Sophistication and a high degree of specialization in materials science, artificial intelligence, communications technology and knowledge-information science techniques are needed among others for the development of realizable and workable CIM systems that are capable of adjusting to volatile markets. CIM factories are to allow the production of a wide variety of similar products in small batches through standard but multi mission oriented designs that accommodate flexibility with specialized software.
Download or read book Computer Integrated Manufacturing written by Dr.R.Raghu Chand and published by Forschung Publications. This book was released on 2020-12-01 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers computer integrated manufacturing systems, analysis of automated flow line & line balancing, automated assembly systems, computerized manufacturing planning systems, CNC machining centers, and robotics.
Download or read book Computer integrated Surgery written by Russell H. Taylor and published by MIT Press. This book was released on 1996 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Computer-Integrated Surgery leading researchers and clinical practitioners describe the exciting new partnership that is being forged between surgeons and machines such as computers and robots, enabling them to perform certain skilled tasks better than either can do alone.The 19 chapters in part I, Technology, explore the components -- registration, basic tools for surgical planning, human-machine interfaces, robotic manipulators, safety -- that are the basis of computer-integrated surgery. These chapters provide essential background material needed to get up to speed on current work as well as a ready reference for those who are already active in the field.The 39 chapters in part II, Applications, cover eight clinical areas -- neurosurgery, orthopedics, eye surgery, dentistry, minimal access surgery, ENT surgery, craniofacial surgery, and radiotherapy -- with a concluding chapter on the high-tech operating room. Each section contains a brief introduction as well as at least one "requirements and opportunities" chapter written by a leading clinician in the area under discussion.
Download or read book CAD CAM CIM written by P. Radhakrishnan and published by New Age International. This book was released on 2008 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Technology Of Cad/Cam/Cim Deals With The Creation Of Information At Different Stages From Design To Marketing And Integration Of Information And Its Effective Communication Among The Various Activities Like Design, Product Data Management, Process Planning, Production Planning And Control, Manufacturing, Inspection, Materials Handling Etc., Which Are Individually Carried Out Through Computer Software. Seamless Transfer Of Information From One Application To Another Is What Is Aimed At.This Book Gives A Detailed Account Of The Various Technologies Which Form Computer Based Automation Of Manufacturing Activities. The Issues Pertaining To Geometric Model Creation, Standardisation Ofgraphics Data, Communication, Manufacturing Information Creation And Manufacturing Control Have Been Adequately Dealt With. Principles Of Concurrent Engineering Have Been Explained And Latest Software In The Various Application Areas Have Been Introduced.The Book Is Written With Two Objectives To Serve As A Textbook For Students Studying Cad/Cam/Cim And As A Reference Book For Professional Engineers.
Download or read book Industrial Robotics written by Mikell P. Groover and published by . This book was released on 1986 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CAD CAM Robotics and Factories of the Future written by Dipak Kumar Mandal and published by Springer. This book was released on 2016-01-05 with total page 831 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is based on the proceedings of the 28th International Conference on CAD/CAM, Robotics and Factories of the Future. This book specially focuses on the positive changes made in the field of robotics, CAD/CAM and future outlook for emerging manufacturing units. Some of the important topics discussed in the conference are product development and sustainability, modeling and simulation, automation, robotics and handling systems, supply chain management and logistics, advanced manufacturing processes, human aspects in engineering activities, emerging scenarios in engineering education and training. The contents of this set of proceedings will prove useful to both researchers and practitioners.
Download or read book Introduction to Business written by Lawrence J. Gitman and published by . This book was released on 2024-09-16 with total page 1455 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Business covers the scope and sequence of most introductory business courses. The book provides detailed explanations in the context of core themes such as customer satisfaction, ethics, entrepreneurship, global business, and managing change. Introduction to Business includes hundreds of current business examples from a range of industries and geographic locations, which feature a variety of individuals. The outcome is a balanced approach to the theory and application of business concepts, with attention to the knowledge and skills necessary for student success in this course and beyond. This is an adaptation of Introduction to Business by OpenStax. You can access the textbook as pdf for free at openstax.org. Minor editorial changes were made to ensure a better ebook reading experience. Textbook content produced by OpenStax is licensed under a Creative Commons Attribution 4.0 International License.
Download or read book Robot Technology and Applications written by Rembold and published by CRC Press. This book was released on 1990-05-25 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduces designers to hardware and software tools necessary for planning, laying out, and building advanced robot-based manufacturing cells surveying the available technology for creating innovative machines suitable to individual needs. Considers assembly system simulation, task-oriented programm
Download or read book Implementing CIM written by Anna Kochan and published by Springer. This book was released on 1986-10 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Robot Oriented Design written by Thomas Bock and published by Cambridge University Press. This book was released on 2015-05-05 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Cambridge Handbooks on Construction Robotics series focuses on the implementation of automation and robot technology to renew the construction industry and to arrest its declining productivity. The series is intended to give professionals, researchers, lecturers, and students basic conceptual and technical skills and implementation strategies to manage, research, or teach the implementation of advanced automation and robot-technology-based processes and technologies in construction. Currently, the implementation of modern developments in product structures (modularity and design for manufacturing), organizational strategies (just in time, just in sequence, and pulling production), and informational aspects (computer-aided design/manufacturing or computer-integrated manufacturing) are lagging because of the lack of modern integrated machine technology in construction. The Cambridge Handbooks on Construction Robotics books discuss progress in robot systems theory and demonstrate their integration using real systematic applications and projections for off-site as well as on-site building production. Robot-Oriented Design and Management introduces the design, innovation, and management methodologies that are key to the realization and implementation of the advanced concepts and technologies presented in the subsequent volumes. This book describes the efficient deployment of advanced construction and building technology. It is concerned with the coadaptation of construction products, processes, organization, and management, and with automated/robotic technology, so that the implementation of modern technology becomes easier and more efficient. It is also concerned with technology and innovation management methodologies and the generation of life cycle-oriented views related to the use of advanced technologies in construction.
Download or read book Manufacturing Planning and Control written by Frank P. M. Biemans and published by Elsevier Publishing Company. This book was released on 1990 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Production organisations are now manufacturing a wide variety of products with increasingly shorter life cycles. Managing such organisations is a complicated task. A primary reason for the complexity is the lack of clarity as to how modifications of the components of the production organization affect the performance of the organisation as a whole. What ultimately matters is the bottom line' efficiency and flexibility of the overall production organisation. This book focuses on how changes to the production components affect the organisation as a whole. Solutions are outlined based on concepts from Information Science and Systems Theory; knowledge of manufacturing as an application domain; and experience with the design of computerised factory control systems. More specifically, it describes the development of a reference model, which represents an idealised production organisation, defining the global tasks of its components as well as the relations between the components and the whole. A systems view of a production organisation is given, encompassing all aspects of production and management.
Download or read book Smart Robots written by V. Hunt and published by Springer Science & Business Media. This book was released on 2013-03-07 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here is one of the first really thorough presentations on smart robots. Robots, machine vision systems, sensors, manipulators, expert systems, and artificial intelligence concepts combined in state-of-the-art computer integrated manufacturing systems. These "smart" robots increase produc tivity and improve the quality of our products. This comprehensive volume, which is extensively illustrated, provides a unique synthesis and overview of the emerging field of smart robots, the basic approaches for each of the constituents systems, the techniques used, applications, the descriptions of current hardware or software projects, a review of the state-of-the-art of the technology, current research and development efforts, and trends in the development of smart robots. All of the information has been compiled from a wide variety of knowledgeable sources and recent government reports. An extensive selection of photo graphs, diagrams and charts amplify this book. The contents of major chapters include: • Introduction to smart robots • Artificial intelligence for smart robots • Smart robot systems • Sensor-controlled robots • Machine vision systems • Robot manipulators • Natural language processing • Expert systems and • Computer integrated manufacturing Smart Robots presents the state-of-the-art in intelligent robots. It is designed to help the reader develop an understanding of industrial applications of smart robots as well as the new technological develop ments. Smart Robots is an outstanding introduction to the integration and application of machine vision systems, sensors, expert systems, and artificial intelligence technology.
Download or read book Robotics in Smart Manufacturing written by Pedro Neto and published by Springer. This book was released on 2013-06-12 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the International Workshop on Robotics in Smart Manufacturing, WRSM 2013, held in Porto, Portugal, in June 2013. The 20 revised full papers presented were carefully reviewed and selected from numerous submissions. The papers address issues such as robotic machining, off-line robot programming, robot calibration, new robotic hardware and software architectures, advanced robot teaching methods, intelligent warehouses, robot co-workers and application of robots in the textile industry.
Download or read book Integration of CAD CAPP CAM written by Jianbin Xue and published by Walter de Gruyter GmbH & Co KG. This book was released on 2018-07-23 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book introduces the fundamentals and development of Computer aided design, Computer aided process planning, and Computer aided manufacturing. The integration of CAD/CAPP/CAM, product data management and Concurrent engineering and collaborative design etc. are also illustrated in detail, which make this book be an essential reference for graduate students, scientists and practitioner in the research fields of computer sciences and engineering.
Download or read book Computer Integrated Manufacturing written by American Society of Mechanical Engineers. Winter Annual Meeting and published by . This book was released on 1983 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt:
