Download or read book Computer Controlled Systems written by Karl J Åström and published by Courier Corporation. This book was released on 2013-06-13 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume features computational tools that can be applied directly and are explained with simple calculations, plus an emphasis on control system principles and ideas. Includes worked examples, MATLAB macros, and solutions manual.
Download or read book Automotive Computer Controlled Systems written by Allan Bonnick and published by Routledge. This book was released on 2007-08-15 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: 'Automotive Computer Controlled Systems' explains the fundamental principles of engineering that lie behind the operation of vehicle electronic systems. Having obtained this knowledge, the reader will be able to make full use of the diagnostic equipment which is currently available. The book builds on the concepts contained in Vehicle Electronic Systems and Fault Diagnosis and gives clear steps to fault diagnosis and subsequent repair of the vehicle's electronic systems. The author discusses electronics only within the context of the vehicle systems under consideration, and thus keeps theory to a minimum. Allan Bonnick has written articles for several transport/vehicle journals and carries out consultancy work for the Institute of Road Transport Engineers. In addition, he has had many years teaching experience and is ideally placed to write this informative guide.
Download or read book Computer Controlled Systems written by G. Perdikaris and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary objective of the book is to provide advanced undergraduate or frrst-year graduate engineering students with a self-contained presentation of the principles fundamental to the analysis, design and implementation of computer controlled systems. The material is also suitable for self-study by practicing engineers and is intended to follow a first course in either linear systems analysis or control systerns. A secondary objective of the book is to provide engineering and/or computer science audiences with the material for a junior/senior-level course in modern systems analysis. Chapters 2, 3, 4, and 5 have been designed with this purposein rnind. The emphasis in such a course is to develop the rnathernatical tools and methods suitable for the analysis and design of real-time systems such as digital filters. Thus, engineers and/or computer scientists who know how to program computers can understand the mathematics relevant to the issue of what it is they are programrning. This is especially important for those who may work in engineering and scientific environments where, for instance, programrning difference equations for real-time applications is becorning increasingly common. A background in linear algebra should be an adequate prerequisite for the systems analysis course. Chapter 1 of the book presents a brief introduction to computer controlled systems. It describes the general issues and terminology relevant to the analysis, design, and implementation of such systems.
Download or read book Feedback Control for Computer Systems written by Philipp K. Janert and published by "O'Reilly Media, Inc.". This book was released on 2013-09-19 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: How can you take advantage of feedback control for enterprise programming? With this book, author Philipp K. Janert demonstrates how the same principles that govern cruise control in your car also apply to data center management and other enterprise systems. Through case studies and hands-on simulations, you’ll learn methods to solve several control issues, including mechanisms to spin up more servers automatically when web traffic spikes. Feedback is ideal for controlling large, complex systems, but its use in software engineering raises unique issues. This book provides basic theory and lots of practical advice for programmers with no previous background in feedback control. Learn feedback concepts and controller design Get practical techniques for implementing and tuning controllers Use feedback “design patterns” for common control scenarios Maintain a cache’s “hit rate” by automatically adjusting its size Respond to web traffic by scaling server instances automatically Explore ways to use feedback principles with queueing systems Learn how to control memory consumption in a game engine Take a deep dive into feedback control theory
Download or read book Computer Aided Control Systems Design written by Cheng Siong Chin and published by CRC Press. This book was released on 2012-12-12 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer-Aided Control Systems Design: Practical Applications Using MATLAB® and Simulink® supplies a solid foundation in applied control to help you bridge the gap between control theory and its real-world applications. Working from basic principles, the book delves into control systems design through the practical examples of the ALSTOM gasifier system in power stations and underwater robotic vehicles in the marine industry. It also shows how powerful software such as MATLAB® and Simulink® can aid in control systems design. Make Control Engineering Come Alive with Computer-Aided Software Emphasizing key aspects of the design process, the book covers the dynamic modeling, control structure design, controller design, implementation, and testing of control systems. It begins with the essential ideas of applied control engineering and a hands-on introduction to MATLAB and Simulink. It then discusses the analysis, model order reduction, and controller design for a power plant and the modeling, simulation, and control of a remotely operated vehicle (ROV) for pipeline tracking. The author explains how to obtain the ROV model and verify it by using computational fluid dynamic software before designing and implementing the control system. In addition, the book details the nonlinear subsystem modeling and linearization of the ROV at vertical plane equilibrium points. Throughout, the author delineates areas for further study. Appendices provide additional information on various simulation models and their results. Learn How to Perform Simulations on Real Industry Systems A step-by-step guide to computer-aided applied control design, this book supplies the knowledge to help you deal with control problems in industry. It is a valuable reference for anyone who wants a better understanding of the theory and practice of basic control systems design, analysis, and implementation.
Download or read book Multivariable Computer controlled Systems written by Efim N. Rosenwasser and published by Springer. This book was released on 2010-10-19 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, the authors extend the parametric transfer function methods, which incorporate time-dependence, to the idea of the parametric transfer matrix in a complete exposition of analysis and design methods for multiple-input, multiple-output (MIMO) sampled-data systems. Appendices covering basic mathematical formulae, two MATLAB® toolboxes round out this self-contained guide to multivariable control systems. The book will interest researchers in automatic control and to development engineers working with advanced control technology.
Download or read book Digital Control Systems written by Ioan Doré Landau and published by Springer Science & Business Media. This book was released on 2007-05-11 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: The extraordinary development of digital computers (microprocessors, microcontrollers) and their extensive use in control systems in all fields of applications has brought about important changes in the design of control systems. Their performance and their low cost make them suitable for use in control systems of various kinds which demand far better capabilities and performances than those provided by analog controllers. However, in order really to take advantage of the capabilities of microprocessors, it is not enough to reproduce the behavior of analog (PID) controllers. One needs to implement specific and high-performance model based control techniques developed for computer-controlled systems (techniques that have been extensively tested in practice). In this context identification of a plant dynamic model from data is a fundamental step in the design of the control system. The book takes into account the fact that the association of books with software and on-line material is radically changing the teaching methods of the control discipline. Despite its interactive character, computer-aided control design software requires the understanding of a number of concepts in order to be used efficiently. The use of software for illustrating the various concepts and algorithms helps understanding and rapidly gives a feeling of the various phenomena.
Download or read book Computer Controlled Systems written by Karl Johan Åström and published by Courier Corporation. This book was released on 2011-01-01 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume's focus on the design of computer controlled systems features computational tools that can be applied directly and are explained with simple paper-and-pencil calculations. The use of computational tools is balanced by strong emphasis on control system principles and ideas. Extensive pedagogical aids include worked examples, MATLAB macros, and a solutions manual.
Download or read book Computer Aided Design of Control Systems written by Michel A. Cuénod and published by Pergamon. This book was released on 1980 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and analysis methods for plants, controllers and control systems; Program packages and programming languages for design purposes; Computer assisted planning; CAD in research, development and instruction; Applications; Lata papers; Survey papers; Round table discussions.
Download or read book Modern Control System Theory written by M. Gopal and published by New Age International. This book was released on 1993 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: About the book... The book provides an integrated treatment of continuous-time and discrete-time systems for two courses at postgraduate level, or one course at undergraduate and one course at postgraduate level. It covers mainly two areas of modern control theory, namely; system theory, and multivariable and optimal control. The coverage of the former is quite exhaustive while that of latter is adequate with significant provision of the necessary topics that enables a research student to comprehend various technical papers. The stress is on interdisciplinary nature of the subject. Practical control problems from various engineering disciplines have been drawn to illustrate the potential concepts. Most of the theoretical results have been presented in a manner suitable for digital computer programming along with the necessary algorithms for numerical computations.
Download or read book Distributed Computer Control Systems in Industrial Automation written by VijayP. Bhatkar and published by Routledge. This book was released on 2017-11-22 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: A reference guide for professionals or text for graduate and postgraduate students, this volume emphasizes practical designs and applications of distributed computer control systems. It demonstrates how to improve plant productivity, enhance product quality, and increase the safety, reliability, and
Download or read book Digital Computer Control Systems written by Gurvinder S. Virk and published by . This book was released on 1991 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital control methods are replacing most conventional analogue systems. The aim of this book is to present an up-to-date introduction to these systems, and to instruct and assist readers so that they are able to connect computers to real systems for control and/or analysis purposes.
Download or read book Computer Systems for Automation and Control written by Gustaf Olsson and published by . This book was released on 1992 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer Applications -- Physical Sciences and Engineering.
Download or read book Automotive Computer Controlled Systems written by Allan Bonnick and published by Routledge. This book was released on 2007-08-15 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: 'Automotive Computer Controlled Systems' explains the fundamental principles of engineering that lie behind the operation of vehicle electronic systems. Having obtained this knowledge, the reader will be able to make full use of the diagnostic equipment which is currently available. The book builds on the concepts contained in Vehicle Electronic Systems and Fault Diagnosis and gives clear steps to fault diagnosis and subsequent repair of the vehicle's electronic systems. The author discusses electronics only within the context of the vehicle systems under consideration, and thus keeps theory to a minimum. Allan Bonnick has written articles for several transport/vehicle journals and carries out consultancy work for the Institute of Road Transport Engineers. In addition, he has had many years teaching experience and is ideally placed to write this informative guide.
Download or read book Computer Controlled Systems written by Efim N. Rosenwasser and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the reader to a novel method of mathematical description, analysis and design of digital control systems, which makes it possible to take into account, in the most complete form, specific features of interaction between continuous-time and discrete time processes.
Download or read book Multivariable Computer controlled Systems written by Efim N. Rosenwasser and published by Springer Science & Business Media. This book was released on 2006-09-07 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, the authors extend the parametric transfer function methods, which incorporate time-dependence, to the idea of the parametric transfer matrix in a complete exposition of analysis and design methods for multiple-input, multiple-output (MIMO) sampled-data systems. Appendices covering basic mathematical formulae, two MATLAB® toolboxes round out this self-contained guide to multivariable control systems. The book will interest researchers in automatic control and to development engineers working with advanced control technology.
Download or read book Computer Controlled Systems with Delay written by Efim N. Rosenwasser and published by Springer. This book was released on 2019-05-22 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer-Controlled Systems with Delay is a systematic study of the problems of analysis and synthesis for multidimensional sampled-data (SD) systems with delay. It is based on the frequency polynomial method, in which the concept of a parametric transfer matrix (PTM) plays a key role. Until now, no alternative general methods have been available to solve the above problems. The text is divided into three parts: background information from the theory of polynomial and rational matrices, helps the reader to acquire the basic understanding necessary to use the main content of the book without addressing additional sources; methods for the mathematical description of multidimensional SD systems with delay, based on the concept of the PTM; and optimization methods for multidimensional SD systems with delay, including H2 and L2 optimization as well as H2 optimization for colored input signals. The monograph is completed by three appendices. An algorithm for constructing the set of pathological sampling periods for a continuous SISO object with delay is provided first. MATLAB®-toolbox algorithms representing methods described in the book and application examples for selected optimization problems are given in the second. A solution to the problem of guaranteeing the required performance in a class of stochastic disturbances for SD systems with delay is considered in the third. Computer-Controlled Systems with Delay is intended for engineers, scientists and teachers working in modern control theory. It will also benefit post-graduate students taking courses in related disciplines. The book continues the description of the authors’ research results on developing methods for SD systems theory which are based on the PTM concept and published in the monographs Computer Controlled Systems and Multivariable Computer-controlled Systems.
