Download or read book Computer Assisted and Robotic Endoscopy and Clinical Image Based Procedures written by M. Jorge Cardoso and published by Springer. This book was released on 2017-09-06 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed joint proceedings of the 4th International Workshop on Computer Assisted and Robotic Endoscopy, CARE 2017, and the 6th International Workshop on Clinical Image-Based Procedures: Translational Research in Medical Imaging, CLIP 2017, held in conjunction with the 20th International Conference on Medical Imaging and Computer-Assisted Intervention, MICCAI 2017, in Québec City, QC, Canada, in September 2017. The 7 full papers presented at CARE 2017 and the 10 full papers presented at CLIP 2017 were carefully reviewed and selected. The papers deal with interventional and diagnostic endoscopy integrating the latest advances in computer vision, robotics, medical imaging and information processing and the development and evaluation of new translational image-based techniques in the modern hospital.

Download or read book Computer Assisted and Robotic Endoscopy written by Xiongbiao Luo and published by Springer. This book was released on 2016-02-19 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-conference proceedings of the Second International Workshop on Computer Assisted and Robotic Endoscopy, CARE 2015, held in conjunction with MICCAI 2015, in Munich, Germany, in October 2015. The 15 revised full papers were carefully selected out of 20 initial submissions and focus on recent technical advances associated with computer vision; graphics; robotics and medical imaging; external tracking systems; medical device control systems; information processing techniques; endoscopy; planning and simulation.

Download or read book Computer Assisted and Robotic Endoscopy written by Xiongbiao Luo and published by Springer. This book was released on 2014-11-22 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the First International Workshop on Computer Assisted and Robotic Endoscopy, CARE 2014, held in conjunction with MICCAI 2014, in Boston, MA, USA, in September 2014. The 12 papers presented focus on recent technical advances associated with computer vision; graphics; robotics and medical imaging; external tracking systems; medical device control systems; information processing techniques; endoscopy; planning and simulation.

Download or read book Computer Assisted and Robotic Endoscopy written by Terry Peters and published by Springer. This book was released on 2017-02-20 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-conference proceedings of the Third International Workshop on Computer Assisted and Robotic Endoscopy, CARE 2016, held in conjunction with MICCAI 2016, in Athens, Greece, in October 2016. The 11 revised full papers were carefully selected out of 13 initial submissions. The papers are organized on topical secttion such as computer vision, graphics, robotics, medical imaging, external tracking systems, medical device controls systems, information processing techniques, endoscopy planning and simulation.

Download or read book OR 2 0 Context Aware Operating Theaters Computer Assisted Robotic Endoscopy Clinical Image Based Procedures and Skin Image Analysis written by Danail Stoyanov and published by Springer. This book was released on 2018-10-01 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed joint proceedings of the First International Workshop on OR 2.0 Context-Aware Operating Theaters, OR 2.0 2018, 5th International Workshop on Computer Assisted Robotic Endoscopy, CARE 2018, 7th International Workshop on Clinical Image-Based Procedures, CLIP 2018, and the First International Workshop on Skin Image Analysis, ISIC 2018, held in conjunction with the 21st International Conference on Medical Imaging and Computer-Assisted Intervention, MICCAI 2018, in Granada, Spain, in September 2018. The 11 full papers presented at OR 2.0 2018, the 5 full papers presented at CARE 2018, the 8 full papers presented at CLIP 2018, and the 10 full papers presented at ISIC 2018 were carefully reviewed and selected. The OR 2.0 papers cover a wide range of topics such as machine vision and perception, robotics, surgical simulation and modeling, multi-modal data fusion and visualization, image analysis, advanced imaging, advanced display technologies, human-computer interfaces, sensors. The CARE papers cover topics to advance the field of computer-assisted and robotic endoscopy. The CLIP papers cover topics to fill gaps between basic science and clinical applications. The ISIC papers cover topics to facilitate knowledge dissemination in the field of skin image analysis, as well as to host a melanoma detection challenge, raising awareness and interest for these socially valuable tasks.

Download or read book Computer integrated Surgery written by Russell H. Taylor and published by MIT Press. This book was released on 1996 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Computer-Integrated Surgery leading researchers and clinical practitioners describe the exciting new partnership that is being forged between surgeons and machines such as computers and robots, enabling them to perform certain skilled tasks better than either can do alone.The 19 chapters in part I, Technology, explore the components -- registration, basic tools for surgical planning, human-machine interfaces, robotic manipulators, safety -- that are the basis of computer-integrated surgery. These chapters provide essential background material needed to get up to speed on current work as well as a ready reference for those who are already active in the field.The 39 chapters in part II, Applications, cover eight clinical areas -- neurosurgery, orthopedics, eye surgery, dentistry, minimal access surgery, ENT surgery, craniofacial surgery, and radiotherapy -- with a concluding chapter on the high-tech operating room. Each section contains a brief introduction as well as at least one "requirements and opportunities" chapter written by a leading clinician in the area under discussion.

Download or read book Robotic Assisted Minimally Invasive Surgery written by Shawn Tsuda and published by Springer. This book was released on 2018-10-31 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: Minimally invasive surgery has impacted the outcomes of surgery more than any technology since the development of sterile technique. The hard science has demonstrated that decrease in wound complications and recovery time has created the biggest gap with open approaches to surgery. The total economic benefit may be unfathomable when looked at comprehensively. Integral to the rise of minimal access and therapeutic techniques in surgery has been the growth of technological improvements over time. Beginning with insufflators, videoscopy, and energy devices, that evolution has continued into the development of tele-surgical devices that feature full articulation of instruments, high-resolution 3-D optics, and computer assisted movement. This has come with controversy – as the dominant manufacturer of robotic assisted devices, Intuitive Surgical, and their generations of da Vinci surgical platforms, holds enough market share to spur cries of monopoly and financial excess. However, with over 3000 world-wide systems in use, and over 6000 peer-reviewed research articles, the impact of robotic surgery cannot be ignored. The current state of data suggests equivalency in most procedures with regard to traditional outcome measures, equal or somewhat elevated costs, with specific areas of superiority. The first section of this textbook, Surgical Robots, covers the history, economics, training, and medico-legal aspects of robotic surgery that will be of interest to students, residents, fellows, surgical staff, and administrators or public health specialists who seek to gain a comprehensive background on robotic surgery, or justification for purchasing a robotic system for their institution. Surgeons will also find this background valuable to their practice, to give context to their procedures so they can better counsel their patients, help with advocating for robotic platform purchases, and proactively prepare themselves for medico-legal issues. The chapter on legal issues will have specific instances of robotic surgery-related lawsuits and their outcomes, a first for robotic surgery texts. The second section of this textbook, Robotic Procedures, will contain a comprehensive catalogue of procedures that have been performed robotically in general surgery, gynecology, urology, plastic surgery, cardiothoracic, and otolaryngology. Each author will cover the existing literature, preoperative planning, room and patient setup, steps of the procedure, and postoperative care. Standardized room maps and port placement will help the student, resident, fellow, surgeon or OR Staff to quickly reference these before cases. Each chapter will also cover the specific equipment needs and expected complexity of the procedures, allowing administrators to better gauge how to prepare for, or ration, use or their robotic resources. The final section, Future of Robotics, will give the entire scope of audience a look into what exciting advancements in the field are on the horizon. This textbook is a complete resource for robotic-assisted minimally invasive surgery, covering the history, current state, technical and clinical aspects, and future considerations that may be of interest to any who has a role, stake, or curiosity regarding robotic surgery.

Download or read book Handbook of Medical Image Computing and Computer Assisted Intervention written by S. Kevin Zhou and published by Academic Press. This book was released on 2019-10-18 with total page 1074 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Medical Image Computing and Computer Assisted Intervention presents important advanced methods and state-of-the art research in medical image computing and computer assisted intervention, providing a comprehensive reference on current technical approaches and solutions, while also offering proven algorithms for a variety of essential medical imaging applications. This book is written primarily for university researchers, graduate students and professional practitioners (assuming an elementary level of linear algebra, probability and statistics, and signal processing) working on medical image computing and computer assisted intervention. Presents the key research challenges in medical image computing and computer-assisted intervention Written by leading authorities of the Medical Image Computing and Computer Assisted Intervention (MICCAI) Society Contains state-of-the-art technical approaches to key challenges Demonstrates proven algorithms for a whole range of essential medical imaging applications Includes source codes for use in a plug-and-play manner Embraces future directions in the fields of medical image computing and computer-assisted intervention

Download or read book Medical Image Computing and Computer Assisted Intervention MICCAI 2021 written by Marleen de Bruijne and published by Springer Nature. This book was released on 2021-09-22 with total page 711 pages. Available in PDF, EPUB and Kindle. Book excerpt: The eight-volume set LNCS 12901, 12902, 12903, 12904, 12905, 12906, 12907, and 12908 constitutes the refereed proceedings of the 24th International Conference on Medical Image Computing and Computer-Assisted Intervention, MICCAI 2021, held in Strasbourg, France, in September/October 2021.* The 531 revised full papers presented were carefully reviewed and selected from 1630 submissions in a double-blind review process. The papers are organized in the following topical sections: Part I: image segmentation Part II: machine learning - self-supervised learning; machine learning - semi-supervised learning; and machine learning - weakly supervised learning Part III: machine learning - advances in machine learning theory; machine learning - attention models; machine learning - domain adaptation; machine learning - federated learning; machine learning - interpretability / explainability; and machine learning - uncertainty Part IV: image registration; image-guided interventions and surgery; surgical data science; surgical planning and simulation; surgical skill and work flow analysis; and surgical visualization and mixed, augmented and virtual reality Part V: computer aided diagnosis; integration of imaging with non-imaging biomarkers; and outcome/disease prediction Part VI: image reconstruction; clinical applications - cardiac; and clinical applications - vascular Part VII: clinical applications - abdomen; clinical applications - breast; clinical applications - dermatology; clinical applications - fetal imaging; clinical applications - lung; clinical applications - neuroimaging - brain development; clinical applications - neuroimaging - DWI and tractography; clinical applications - neuroimaging - functional brain networks; clinical applications - neuroimaging – others; and clinical applications - oncology Part VIII: clinical applications - ophthalmology; computational (integrative) pathology; modalities - microscopy; modalities - histopathology; and modalities - ultrasound *The conference was held virtually.

Download or read book Computer Aided Analysis of Gastrointestinal Videos written by Jorge Bernal and published by Springer Nature. This book was released on 2021-07-09 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book opens with an introduction to the main purpose and tasks of the GIANA challenge, as well as a summary and an analysis of the results and performance obtained by the 20 participating teams. The early and accurate diagnosis of gastrointestinal diseases is critical for increasing the chances of patient survival, and efficient screening is vital for locating precursor lesions. Video colonoscopy and wireless capsule endoscopy (WCE) are the gold-standard tools for colon and intestinal tract screening, respectively. Yet these tools still present some drawbacks, such as lesion miss rate, lack of in vivo diagnosis capabilities, and perforation risk. To mitigate these, computer-aided detection/diagnosis systems can play a key role in assisting clinicians in the different stages of the exploration. This book presents the latest, state-of-the-art approaches in this field, and also tackles the clinical considerations required to efficiently deploy these systems in the exploration room. The coverage draws upon results from the Gastrointestinal Image Analysis (GIANA) Challenge, part of the EndoVis satellite events of the conferences MICCAI 2017 and 2018. Each method proposed to address the different subtasks of the challenges is detailed in a separate chapter, offering a deep insight into this topic of interest for public health. This book appeals to researchers, practitioners, and lecturers spanning both the computer vision and gastroenterology communities.

Download or read book Computer Assisted Orthopaedic Surgery for Hip and Knee written by Nobuhiko Sugano and published by Springer. This book was released on 2018-04-10 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on two major areas in the field of computer assisted orthopaedic surgery (CAOS): hip and knee surgery. It reviews the current clinical status of the various CAOS tools for hip and knee arthroplasty, osteotomy, ligament reconstruction, spine surgery, trauma surgery, and tumour surgery that have become available in recent years and discusses future applications based on fundamental research and continuously developing computer technology / devices. Computer Assisted Orthopaedic Surgery for Hip and Knee highlights three areas – total knee arthroplasty (TKA); total hip arthroplasty (THA) and hip osteotomy; and statistical shape modelling. It is a valuable resource for orthopaedic surgeons, clinical technologists and computer scientists and other specialists interested in this technology.

Download or read book Medical Image Computing and Computer Assisted Intervention MICCAI 2023 Workshops written by M. Emre Celebi and published by Springer Nature. This book was released on 2023-11-30 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: This double volume set LNCS 14393-14394 constitutes the proceedings from the workshops held at the 26th International Conference on Medical Image Computing and Computer Assisted Intervention, MICCAI 2023 Workshops, which took place in Vancouver, BC, Canada, in October 2023. The 54 full papers together with 14 short papers presented in this volume were carefully reviewed and selected from 123 submissions from all workshops. The papers of the workshops are presenting the topical sections: Eighth International Skin Imaging Collaboration Workshop (ISIC 2023) First Clinically-Oriented and Responsible AI for Medical Data Analysis (Care-AI 2023) Workshop First International Workshop on Foundation Models for Medical Artificial General Intelligence (MedAGI 2023) Fourth Workshop on Distributed, Collaborative and Federated Learning (DeCaF 2023) First MICCAI Workshop on Time-Series Data Analytics and Learning First MICCAI Workshop on Lesion Evaluation and Assessment with Follow-Up (LEAF) AI For Treatment Response Assessment and predicTion Workshop (AI4Treat 2023) Fourth International Workshop on Multiscale Multimodal Medical Imaging (MMMI 2023) Second International Workshop on Resource-Effcient Medical Multimodal Medical Imaging Image Analysis (REMIA 2023)

Download or read book International Symposium on History of Machines and Mechanisms written by Hong-Sen Yan and published by Springer Science & Business Media. This book was released on 2009-01-11 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Symposium on the History of Machines and Mechanisms is the main activity of the Permanent Commission (PC) for the History of Mechanism and Machine Science (HMM) of the International Federation for the Promotion of Mechanism and Machine Science (IFToMM). The first symposium, HMM2000, was initiated by Dr. Marco Ceccarelli and was held at the University of Cassino (Cassino, Italy) on May 11–13, 2000. The second symposium, HMM2004, was chaired by Dr. Marco Ceccarelli and held at the same venue on May 12–15, 2004. The third symposium, HMM2008, was chaired by Dr. Hong-Sen Yan and held at the National Cheng Kung University (Tainan, Taiwan) on November 11–14, 2008. The mission of IFToMM is to promote research and development in the field of machines and mechanisms by theoretical and experimental methods, along with their practical applications. The aim of HMM2008 is to establish an international forum for presenting and discussing historical developments in the field of Mechanism and Machine Science (MMS). The subject area covers all aspects of the development of HMM, such as machine, mechanism, kinematics, design method, etc., that are related to people, events, objects, anything that assisted in the development of the HMM, and presented in the forms of reasoning and ar- ments, demonstration and identification, and description and evaluation.

Download or read book Computational Surgery and Dual Training written by Marc Garbey and published by Springer Science & Business Media. This book was released on 2013-12-05 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: This critical volume focuses on the use of medical imaging, medical robotics, simulation, and information technology in surgery. Part I discusses computational surgery and disease management and specifically breast conservative therapy, abdominal surgery for cancer, vascular occlusive disease and trauma medicine. Part II covers the role of image processing and visualization in surgical intervention with a focus on case studies. Part III presents the important role of robotics in image driven intervention. Part IV provides a road map for modeling, simulation and experimental data. Part V deals specifically with the importance of training in the computational surgery area.

Download or read book Proceedings of 2021 International Conference on Medical Imaging and Computer Aided Diagnosis MICAD 2021 written by Ruidan Su and published by Springer Nature. This book was released on 2021-08-14 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers virtually all aspects of image formation in medical imaging, including systems based on ionizing radiation (x-rays, gamma rays) and non-ionizing techniques (ultrasound, optical, thermal, magnetic resonance, and magnetic particle imaging) alike. In addition, it discusses the development and application of computer-aided detection and diagnosis (CAD) systems in medical imaging. Also there will be a special track on computer-aided diagnosis on COVID-19 by CT and X-rays images. Given its coverage, the book provides both a forum and valuable resource for researchers involved in image formation, experimental methods, image performance, segmentation, pattern recognition, feature extraction, classifier design, machine learning / deep learning, radiomics, CAD workstation design, human–computer interaction, databases, and performance evaluation.

Download or read book Medical Image Computing and Computer Assisted Intervention MICCAI 2002 written by Takeyoshi Dohi and published by Springer. This book was released on 2003-06-30 with total page 855 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fifth international Conference in Medical Image Computing and Computer Assisted Intervention (MICCAI 2002) was held in Tokyo from September 25th to 28th, 2002. This was the first time that the conference was held in Asia since its foundation in 1998. The objective of the conference is to offer clinicians and scientists the opportunity to collaboratively create and explore the new medical field. Specifically, MICCAI offers a forum for the discussion of the state of art in computer-assisted interventions, medical robotics, and image processing among experts from multi-disciplinary professions, including but not limited to clinical doctors, computer scientists, and mechanical and biomedical engineers. The expectations of society are very high; the advancement of medicine will depend on computer and device technology in coming decades, as they did in the last decades. We received 321 manuscripts, of which 41 were chosen for oral presentation and 143 for poster presentation. Each paper has been included in these proceedings in eight-page full paper format, without any differentiation between oral and poster papers. Adherence to this full paper format, along with the increased number of manuscripts, surpassing all our expectations, has led us to issue two proceedings volumes for the first time in MICCAI’s history. Keeping to a single volume by assigning fewer pages to each paper was certainly an option for us considering our budget constraints. However, we decided to increase the volume to offer authors maximum opportunity to argue the state of art in their work and to initiate constructive discussions among the MICCAI audience.

Download or read book Endorobotics written by Luigi Manfredi and published by Academic Press. This book was released on 2022-01-04 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book comprises three parts. The first part provides the state-of-the-art of robots for endoscopy (endorobots), including devices already available in the market and those that are still at the R&D stage. The second part focusses on the engineering design; it includes the use of polymers for soft robotics, comparing their advantages and limitations with those of their more rigid counterparts. The third part includes the project management of a multidisciplinary team, the health cost of current technology, and how a cost-effective device can have a substantial impact on the market. It also includes information on data governance, ethical and legal frameworks, and all steps needed to make this new technology available. Focuses on a new design paradigm for endorobots applications Provides a unique collection of engineering, medical and management contributions for endorobotics design Describes endorobotics, starting from available devices in both clinical use and academia