EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book Computer Analysis for Dynamic Response of Beams and Plates on Elastic Foundations

Download or read book Computer Analysis for Dynamic Response of Beams and Plates on Elastic Foundations written by M. C. Wang and published by . This book was released on 1983 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current Air Force Nondestructive Pavement Testing (NDPT) method requires a rational method to evaluate pavement layer modulus values. A reasonable step toward the development of such a method is computer analyses of elastic layered systems subjected to dynamic loading. This research adopts the Method of Direct Analysis which uses the impulse-momentum laws and constitutive relations but bypasses the explicit use of differential equations. As a result of the research, two computer programs were developed, one for infinite beams and the other for infinite plates both on elastic foundations. To demonstrate the effectiveness of the developed computer programs, response analyses were made for sustained, pulse and sinusoidal loadings. The results for sustained loading on an infinite beam agreed very well with an available exact solution. It was concluded that the Method of Direct Analysis is an effective tool for dynamic response analysis of elastic layered systems. (Author).

Book Dynamic Response of Beams on Elastic Foundation

Download or read book Dynamic Response of Beams on Elastic Foundation written by Yew Chin Lai and published by . This book was released on 1990 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Scientific and Technical Aerospace Reports

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Analysis of Beams on Elastic Foundations

Download or read book Analysis of Beams on Elastic Foundations written by Glyn Jones and published by Thomas Telford. This book was released on 1997 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work has been specifically written to describe finite difference solutions to variations in beam on elastic foundation problems using micro-computers. The accompanying BEF (Beam on Elastic Foundation) software can analyze all the practical applications identified in the text.

Book Applied Mechanics Reviews

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1973 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Analysis of Large Static and Dynamic Deflections of Plates on Elastic Foundations

Download or read book Analysis of Large Static and Dynamic Deflections of Plates on Elastic Foundations written by Saradindu Narayan Sinha and published by . This book was released on 1962 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book A Two Step Perturbation Method in Nonlinear Analysis of Beams  Plates and Shells

Download or read book A Two Step Perturbation Method in Nonlinear Analysis of Beams Plates and Shells written by Hui-Shen Shen and published by John Wiley & Sons. This book was released on 2013-07-03 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: The capability to predict the nonlinear response of beams, plates and shells when subjected to thermal and mechanical loads is of prime interest to structural analysis. In fact, many structures are subjected to high load levels that may result in nonlinear load-deflection relationships due to large deformations. One of the important problems deserving special attention is the study of their nonlinear response to large deflection, postbuckling and nonlinear vibration. A two-step perturbation method is firstly proposed by Shen and Zhang (1988) for postbuckling analysis of isotropic plates. This approach gives parametrical analytical expressions of the variables in the postbuckling range and has been generalized to other plate postbuckling situations. This approach is then successfully used in solving many nonlinear bending, postbuckling, and nonlinear vibration problems of composite laminated plates and shells, in particular for some difficult tasks, for example, shear deformable plates with four free edges resting on elastic foundations, contact postbuckling of laminated plates and shells, nonlinear vibration of anisotropic cylindrical shells. This approach may be found its more extensive applications in nonlinear analysis of nano-scale structures. Concentrates on three types of nonlinear analyses: vibration, bending and postbuckling Presents not only the theoretical aspect of the techniques, but also engineering applications of the method A Two-Step Perturbation Method in Nonlinear Analysis of Beams, Plates and Shells is an original and unique technique devoted entirely to solve geometrically nonlinear problems of beams, plates and shells. It is ideal for academics, researchers and postgraduates in mechanical engineering, civil engineering and aeronautical engineering.

Book Design Analysis of Beams  Circular Plates and Cylindrical Tanks on Elastic Foundations

Download or read book Design Analysis of Beams Circular Plates and Cylindrical Tanks on Elastic Foundations written by Edmund S. Melerski and published by CRC Press. This book was released on 2020-11-26 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This extended and revised second edition elaborates on techniques for the numerical analysis of beams, long strips, circular plates, and circular-cylindrical tanks resting on elastic foundations and on unyielding or elastic supports. Emphasis is placed on the simplicity of analysis, while maintaining the accuracy of results, and a large number of examples are included as illustration. Easy-to-use, fully-revised software is included which runs smoothly under current Windows operating systems. The applicability of the software is extended to analysis of laterally-loaded piles and bending analysis of retaining walls. A bonus suite of complementary software containing programmes for elastic-plastic soil-structure interaction analyses of beams or strips, laterally-loaded piles or sheet-piles, and long retaining walls is also included. This package of numerical techniques and software provides a powerful tool which renders design analysis of structures easy and time-efficient. Practising engineers will find this title invaluable, while postgraduate students and researchers working in soil-structure interaction will also find the book-software package very useful.

Book Computational Mechanics  86

Download or read book Computational Mechanics 86 written by Genki Yagawa and published by Springer. This book was released on 1986-07-25 with total page 1466 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is often said that these days there are too many conferences on general areas of computational mechanics. mechanics. and numer ical methods. vJhile this may be true. the his tory of scientific conferences is itself quite short. According to Abraham Pais (in "Subtle is the Lord ...• " Oxford University Press. 1982. p.80). the first international scientific conference ever held was the Karlsruhe Congress of Chemists. 3-5 September 1860 in Karlsruhe. Germany. There were 127 chemists in attendance. and the participants came from Austria. Belgium. France. Germany. Great Britain. Italy. Mexico. Poland. Russia. Spain. Sweden. and Switzerland. At the top of the agenda of the points to be discussed at this conference was the question: "Shall a difference be made between the expressions molecule and atom?" Pais goes on to note: "The conference did not at once succeed in bringing chemists closer together ... It is possible that the older men were offended by the impetuous behavior and imposing manner of the younger scientists" (see references cited in Pais' book). It may be observed that history. in general. repeats itself. However. at ICCM-86 in Tokyo. roughly 500 participants from both the West and the East were in attendance; there were only scholarly exchanges; the young tried to learn from the more experienced. and a spirit of international academic cooperation prevailed.

Book Vibration of solids and structures under moving loads

Download or read book Vibration of solids and structures under moving loads written by L. Frýba and published by Springer Science & Business Media. This book was released on 2013-04-18 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transport engineering structures are subjected to loads that vary in both time and space. In general mechanics parlance such loads are called moving loads. It is the aim of the book to analyze the effects of this type of load on various elements, components, structures and media of engineering me chanics. In recent years all branches of transport have experienced great advances characterized by increasingly higher speeds and weights of vehicles. As a result, structures and media over or in which the vehicles move have been subjected to vibrations and dynamic stresses far larger than ever before. The author has studied vibrations of elastic and inelastic bodies and structures under the action of moving loads for many years. In the course of his career he has published a number of papers dealing with various aspects of the problem. On the strength of his studies he has arrived at the conclusion that the topic has so grown in scope and importance as to merit a comprehensive treatment. The book is the outcome of his attempt to do so in a single monograph.

Book Handbook On Timoshenko ehrenfest Beam And Uflyand  Mindlin Plate Theories

Download or read book Handbook On Timoshenko ehrenfest Beam And Uflyand Mindlin Plate Theories written by Isaac E Elishakoff and published by World Scientific. This book was released on 2019-10-29 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: The refined theory of beams, which takes into account both rotary inertia and shear deformation, was developed jointly by Timoshenko and Ehrenfest in the years 1911-1912. In over a century since the theory was first articulated, tens of thousands of studies have been performed utilizing this theory in various contexts. Likewise, the generalization of the Timoshenko-Ehrenfest beam theory to plates was given by Uflyand and Mindlin in the years 1948-1951.The importance of these theories stems from the fact that beams and plates are indispensable, and are often occurring elements of every civil, mechanical, ocean, and aerospace structure.Despite a long history and many papers, there is not a single book that summarizes these two celebrated theories. This book is dedicated to closing the existing gap within the literature. It also deals extensively with several controversial topics, namely those of priority, the so-called 'second spectrum' shear coefficient, and other issues, and shows vividly that the above beam and plate theories are unnecessarily overcomplicated.In the spirit of Einstein's dictum, 'Everything should be made as simple as possible but not simpler,' this book works to clarify both the Timoshenko-Ehrenfest beam and Uflyand-Mindlin plate theories, and seeks to articulate everything in the simplest possible language, including their numerous applications.This book is addressed to graduate students, practicing engineers, researchers in their early career, and active scientists who may want to have a different look at the above theories, as well as readers at all levels of their academic or scientific career who want to know the history of the subject. The Timoshenko-Ehrenfest Beam and Uflyand-Mindlin Plate Theories are the key reference works in the study of stocky beams and thick plates that should be given their due and remain important for generations to come, since classical Bernoulli-Euler beam and Kirchhoff-Love theories are applicable for slender beams and thin plates, respectively.Related Link(s)

Book Modeling of Composite Beams and Plates for Static and Dynamic Analysis

Download or read book Modeling of Composite Beams and Plates for Static and Dynamic Analysis written by and published by DIANE Publishing. This book was released on with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book The Shock and Vibration Digest

Download or read book The Shock and Vibration Digest written by and published by . This book was released on 1980 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book The Large time Dynamic Response of a Beam on an Elastic Foundation to a Randomly Moving Load

Download or read book The Large time Dynamic Response of a Beam on an Elastic Foundation to a Randomly Moving Load written by Robert A. Galganski and published by . This book was released on 1969 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Structural Analysis Fundamentals

Download or read book Structural Analysis Fundamentals written by Ramez Gayed and published by CRC Press. This book was released on 2021-09-16 with total page 681 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Analysis Fundamentals presents fundamental procedures of structural analysis, necessary for teaching undergraduate and graduate courses and structural design practice. It applies linear analysis of structures of all types, including beams, plane and space trusses, plane and space frames, plane and eccentric grids, plates and shells, and assemblage of finite-elements. It also treats plastic and time-dependent responses of structures to static loading, as well as dynamic analysis of structures and their response to earthquakes. Geometric nonlinearity in analysis of cable nets and membranes are examined. This is an ideal text for basic and advanced material for use in undergraduate and higher courses. A companion set of computer programs assist in a thorough understanding and application of analysis procedures. The authors provide a special program for each structural system or each procedure. Unlike commercial software, the user can apply any program of the set without a manual or training period. Students, lecturers and engineers internationally employ the procedures presented in in this text and its companion website. Ramez B. Gayed is a Civil Engineering Consultant and Adjunct Professor at the University of Calgary. He is expert on analysis and design of concrete and steel structures. Amin Ghali is Emeritus Professor at the University of Calgary. He is consultant on major international structures. He is inventor of several reinforcing systems for concrete. He has authored over 300 papers and eight patents. His books include Concrete Structures (2012), Circular Storage Tanks and Silos (CRC Press, 2014), and Structural Analysis (CRC Press, 2017).

Book Thermal Structures for Aerospace Applications

Download or read book Thermal Structures for Aerospace Applications written by Earl Arthur Thornton and published by AIAA. This book was released on 1996 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: