Download or read book Advanced Aircraft Flight Performance written by Antonio Filippone and published by Cambridge University Press. This book was released on 2012-12-17 with total page 665 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses aircraft flight performance, focusing on commercial aircraft but also considering examples of high-performance military aircraft. The framework is a multidisciplinary engineering analysis, fully supported by flight simulation, with software validation at several levels. The book covers topics such as geometrical configurations, configuration aerodynamics and determination of aerodynamic derivatives, weight engineering, propulsion systems (gas turbine engines and propellers), aircraft trim, flight envelopes, mission analysis, trajectory optimisation, aircraft noise, noise trajectories and analysis of environmental performance. A unique feature of this book is the discussion and analysis of the environmental performance of the aircraft, focusing on topics such as aircraft noise and carbon dioxide emissions.
Download or read book Securing the Future of U S Air Transportation written by National Research Council and published by National Academies Press. This book was released on 2003-12-18 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: As recently as the summer of 2001, many travelers were dreading air transportation because of extensive delays associated with undercapacity of the system. That all changed on 9/11, and demand for air transportation has not yet returned to peak levels. Most U.S. airlines continue to struggle for survival, and some have filed for bankruptcy. The situation makes it difficult to argue that strong action is urgently needed to avert a crisis of undercapacity in the air transportation system. This report assesses the visions and goals for U.S. civil aviation and technology goals for the year 2050.
Download or read book Introduction to Aircraft Flight Mechanics written by Thomas R. Yechout and published by AIAA. This book was released on 2003 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on a 15-year successful approach to teaching aircraft flight mechanics at the US Air Force Academy, this text explains the concepts and derivations of equations for aircraft flight mechanics. It covers aircraft performance, static stability, aircraft dynamics stability and feedback control.
Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1 957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 29 (thesis year 1984) a total of 12,637 theses titles from 23 Canadian and 202 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 29 reports theses submitted in 1984, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.
Download or read book Commercial Aircraft Propulsion and Energy Systems Research written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2016-08-09 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary human activities that release carbon dioxide (CO2) into the atmosphere are the combustion of fossil fuels (coal, natural gas, and oil) to generate electricity, the provision of energy for transportation, and as a consequence of some industrial processes. Although aviation CO2 emissions only make up approximately 2.0 to 2.5 percent of total global annual CO2 emissions, research to reduce CO2 emissions is urgent because (1) such reductions may be legislated even as commercial air travel grows, (2) because it takes new technology a long time to propagate into and through the aviation fleet, and (3) because of the ongoing impact of global CO2 emissions. Commercial Aircraft Propulsion and Energy Systems Research develops a national research agenda for reducing CO2 emissions from commercial aviation. This report focuses on propulsion and energy technologies for reducing carbon emissions from large, commercial aircraftâ€" single-aisle and twin-aisle aircraft that carry 100 or more passengersâ€"because such aircraft account for more than 90 percent of global emissions from commercial aircraft. Moreover, while smaller aircraft also emit CO2, they make only a minor contribution to global emissions, and many technologies that reduce CO2 emissions for large aircraft also apply to smaller aircraft. As commercial aviation continues to grow in terms of revenue-passenger miles and cargo ton miles, CO2 emissions are expected to increase. To reduce the contribution of aviation to climate change, it is essential to improve the effectiveness of ongoing efforts to reduce emissions and initiate research into new approaches.
Download or read book AIAA Journal written by American Institute of Aeronautics and Astronautics and published by . This book was released on 2006 with total page 1380 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Performance of the Jet Transport Airplane written by Trevor M. Young and published by John Wiley & Sons. This book was released on 2019-10-24 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Performance of the Jet Transport Airplane: Analysis Methods, Flight Operations, and Regulations presents a detailed and comprehensive treatment of performance analysis techniques for jet transport airplanes. Uniquely, the book describes key operational and regulatory procedures and constraints that directly impact the performance of commercial airliners. Topics include: rigid body dynamics; aerodynamic fundamentals; atmospheric models (including standard and non-standard atmospheres); height scales and altimetry; distance and speed measurement; lift and drag and associated mathematical models; jet engine performance (including thrust and specific fuel consumption models); takeoff and landing performance (with airfield and operational constraints); takeoff climb and obstacle clearance; level, climbing and descending flight (including accelerated climb/descent); cruise and range (including solutions by numerical integration); payload–range; endurance and holding; maneuvering flight (including turning and pitching maneuvers); total energy concepts; trip fuel planning and estimation (including regulatory fuel reserves); en route operations and limitations (e.g. climb-speed schedules, cruise ceiling, ETOPS); cost considerations (e.g. cost index, energy cost, fuel tankering); weight, balance and trim; flight envelopes and limitations (including stall and buffet onset speeds, V–n diagrams); environmental considerations (viz. noise and emissions); aircraft systems and airplane performance (e.g. cabin pressurization, de-/anti icing, and fuel); and performance-related regulatory requirements of the FAA (Federal Aviation Administration) and EASA (European Aviation Safety Agency). Key features: Describes methods for the analysis of the performance of jet transport airplanes during all phases of flight Presents both analytical (closed form) methods and numerical approaches Describes key FAA and EASA regulations that impact airplane performance Presents equations and examples in both SI (Système International) and USC (United States Customary) units Considers the influence of operational procedures and their impact on airplane performance Performance of the Jet Transport Airplane: Analysis Methods, Flight Operations, and Regulations provides a comprehensive treatment of the performance of modern jet transport airplanes in an operational context. It is a must-have reference for aerospace engineering students, applied researchers conducting performance-related studies, and flight operations engineers.
Download or read book NASA SP written by and published by . This book was released on 1992 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aircraft Design Projects written by Lloyd R. Jenkinson and published by Elsevier. This book was released on 2003-04-28 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written with students of aerospace or aeronautical engineering firmly in mind, this is a practical and wide-ranging book that draws together the various theoretical elements of aircraft design - structures, aerodynamics, propulsion, control and others - and guides the reader in applying them in practice. Based on a range of detailed real-life aircraft design projects, including military training, commercial and concept aircraft, the experienced UK and US based authors present engineering students with an essential toolkit and reference to support their own project work.All aircraft projects are unique and it is impossible to provide a template for the work involved in the design process. However, with the knowledge of the steps in the initial design process and of previous experience from similar projects, students will be freer to concentrate on the innovative and analytical aspects of their course project. The authors bring a unique combination of perspectives and experience to this text. It reflects both British and American academic practices in teaching aircraft design. Lloyd Jenkinson has taught aircraft design at both Loughborough and Southampton universities in the UK and Jim Marchman has taught both aircraft and spacecraft design at Virginia Tech in the US.* Demonstrates how basic aircraft design processes can be successfully applied in reality* Case studies allow both student and instructor to examine particular design challenges * Covers commercial and successful student design projects, and includes over 200 high quality illustrations
Download or read book Computers and Data Processing Systems written by and published by . This book was released on 1962 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aeronautical Engineering written by and published by . This book was released on 1971 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: A selection of annotated references to unclassified reports and journal articles that were introduced into the NASA scientific and technical information system and announced in Scientific and technical aerospace reports (STAR) and International aerospace abstracts (IAA)
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1986 with total page 1072 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Turbomachinery Performance Analysis written by R. I. Lewis and published by Butterworth-Heinemann. This book was released on 1996-05-31 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This modern overview to performance analysis places aero- and fluid-dynamic treatments, such as cascade and meridional flow analyses, within the broader context of turbomachine performance analysis. For the first time ducted propellers are treated formally within the general family of turbomachines. It also presents a new approach to the use of dimensional analysis which links the overall requirements, such as flow and head, through velocity triangles to blade element loading and related fluid dynamics within a unifying framework linking all aspects of performance analysis for a wide range of turbomachine types. Computer methods are introduced in the main text and a key chapter on axial turbine performance analysis is complemented by the inclusion of 3 major computer programs on an accompanying disc. These enable the user to generate and modify design data through a graphic interface to assess visually the impact on predicted performance and are designed as a Computer Aided Learning Suite for student project work at the professional designer level.Based on the author's many years of teaching at degree level and extensive research experience, this book is a must for all students and professional engineers involved with turbomachinery.
Download or read book Government Reports Annual Index written by and published by . This book was released on 1988 with total page 1016 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NASA Scientific and Technical Publications written by and published by . This book was released on 1989 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NASA Technical Memorandum written by and published by . This book was released on 1991 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:
